diff --git a/src/locales/zh/commands.json b/src/locales/zh/commands.json index 1d5555c86..ff5aa4b73 100644 --- a/src/locales/zh/commands.json +++ b/src/locales/zh/commands.json @@ -36,31 +36,31 @@ "label": "浏览模板" }, "Comfy_Canvas_FitView": { - "label": "适应选定节点的视图" + "label": "适应视图到选中节点" }, "Comfy_Canvas_ResetView": { "label": "重置视图" }, "Comfy_Canvas_ToggleLinkVisibility": { - "label": "画布切换链接可见性" + "label": "切换链接可见性" }, "Comfy_Canvas_ToggleLock": { - "label": "画布切换锁定" + "label": "锁定视图" }, "Comfy_Canvas_ToggleSelectedNodes_Bypass": { - "label": "绕过/取消绕过选定的节点" + "label": "忽略/取消忽略选中节点" }, "Comfy_Canvas_ToggleSelectedNodes_Collapse": { - "label": "折叠/展开选定的节点" + "label": "折叠/展开选中节点" }, "Comfy_Canvas_ToggleSelectedNodes_Mute": { - "label": "静音/取消静音选定的节点" + "label": "静音/取消静音选中节点" }, "Comfy_Canvas_ToggleSelectedNodes_Pin": { - "label": "固定/取消固定选定的节点" + "label": "固定/取消固定选中节点" }, "Comfy_Canvas_ToggleSelected_Pin": { - "label": "固定/取消固定选定的项目" + "label": "固定/取消固定选中项" }, "Comfy_Canvas_ZoomIn": { "label": "放大" @@ -81,19 +81,19 @@ "label": "导出工作流（API格式）" }, "Comfy_Graph_FitGroupToContents": { - "label": "适应组内容" + "label": "适应节点框到内容" }, "Comfy_Graph_GroupSelectedNodes": { - "label": "组选定的节点" + "label": "添加框到选中节点" }, "Comfy_GroupNode_ConvertSelectedNodesToGroupNode": { - "label": "将选定节点转换为组节点" + "label": "将选中节点转换为组节点" }, "Comfy_GroupNode_ManageGroupNodes": { "label": "管理组节点" }, "Comfy_GroupNode_UngroupSelectedGroupNodes": { - "label": "取消选定组节点的分组" + "label": "解散选中组节点" }, "Comfy_Help_AboutComfyUI": { "label": "打开关于ComfyUI" @@ -117,16 +117,16 @@ "label": "新建空白工作流" }, "Comfy_OpenClipspace": { - "label": "剪辑空间" + "label": "打开剪贴板" }, "Comfy_OpenWorkflow": { "label": "打开工作流" }, "Comfy_QueuePrompt": { - "label": "队列提示" + "label": "执行提示词" }, "Comfy_QueuePromptFront": { - "label": "队列提示（前端）" + "label": "执行提示词（前端）" }, "Comfy_Redo": { "label": "重做" @@ -144,7 +144,7 @@ "label": "显示设置对话框" }, "Comfy_ToggleTheme": { - "label": "切换主题（暗/亮）" + "label": "切换主题" }, "Comfy_Undo": { "label": "撤销" @@ -179,8 +179,8 @@ "tooltip": "节点库" }, "Workspace_ToggleSidebarTab_queue": { - "label": "切换队列侧边栏", - "tooltip": "队列" + "label": "切换执行队列侧边栏", + "tooltip": "执行队列" }, "Workspace_ToggleSidebarTab_workflows": { "label": "切换工作流侧边栏", diff --git a/src/locales/zh/main.json b/src/locales/zh/main.json index d919b0329..5d8dd287d 100644 --- a/src/locales/zh/main.json +++ b/src/locales/zh/main.json @@ -10,37 +10,37 @@ }, "dataTypes": { "AUDIO": "音频", - "BOOLEAN": "布尔值", + "BOOLEAN": "布尔", "CLIP": "CLIP", "CLIP_VISION": "CLIP视觉", "CLIP_VISION_OUTPUT": "CLIP视觉输出", "COMBO": "组合", "CONDITIONING": "条件", - "CONTROL_NET": "控制网络", - "FLOAT": "浮点数", - "FLOATS": "浮点数", + "CONTROL_NET": "ControlNet", + "FLOAT": "浮点", + "FLOATS": "浮点组", "GLIGEN": "GLIGEN", "GUIDER": "引导器", - "HOOKS": "钩子", - "HOOK_KEYFRAMES": "钩子关键帧", + "HOOKS": "约束", + "HOOK_KEYFRAMES": "约束关键帧", "IMAGE": "图像", "INT": "整数", - "LATENT": "潜空间", - "LATENT_OPERATION": "潜空间操作", + "LATENT": "Latent", + "LATENT_OPERATION": "Latent操作", "LOAD_3D": "加载3D", "LOAD_3D_ANIMATION": "加载3D动画", "MASK": "遮罩", "MODEL": "模型", - "NOISE": "噪声", - "PHOTOMAKER": "PHOTOMAKER", + "NOISE": "噪波", + "PHOTOMAKER": "PhotoMaker", "SAMPLER": "采样器", - "SIGMAS": "西格玛", + "SIGMAS": "Sigmas", "STRING": "字符串", "STYLE_MODEL": "风格模型", - "TIMESTEPS_RANGE": "时间步长范围", + "TIMESTEPS_RANGE": "时间间隔范围", "UPSCALE_MODEL": "放大模型", "VAE": "VAE", - "WEBCAM": "网络摄像头" + "WEBCAM": "摄像头" }, "desktopMenu": { "confirmReinstall": "这将清除您的 extra_models_config.yaml 文件，并重新开始安装。您确定吗？", @@ -52,7 +52,7 @@ "message": "无法找到 git。正常操作需要一个可用的 git 副本。", "skip": "跳过", "title": "下载 git", - "warning": "如果您确定不需要安装 git，或者这是一个错误，您可以点击跳过以绕过此检查。当前不支持在没有可用 git 副本的情况下运行 ComfyUI。" + "warning": "如果您确定不需要安装 git，或者已经安装了 git，您可以点击跳过以绕过此检查。当前不支持在没有可用 git 副本的情况下运行 ComfyUI。" }, "electronFileDownload": { "cancel": "取消下载", @@ -70,7 +70,7 @@ "close": "关闭", "color": "颜色", "comingSoon": "即将推出", - "command": "命令", + "command": "指令", "confirm": "确认", "copyToClipboard": "复制到剪贴板", "currentUser": "当前用户", @@ -94,13 +94,13 @@ "import": "导入", "insert": "插入", "install": "安装", - "keybinding": "快捷键", + "keybinding": "按键绑定", "loadAllFolders": "加载所有文件夹", "loadWorkflow": "加载工作流", "loading": "加载中", "logs": "日志", "newFolder": "新文件夹", - "next": "下一步", + "next": "下一个", "no": "否", "noResultsFound": "未找到结果", "noTasksFound": "未找到任务", @@ -138,7 +138,7 @@ "panMode": "平移模式", "resetView": "重置视图", "selectMode": "选择模式", - "toggleLinkVisibility": "切换链接可见性", + "toggleLinkVisibility": "切换连线可见性", "zoomIn": "放大", "zoomOut": "缩小" }, @@ -160,10 +160,10 @@ "install": { "appDataLocationTooltip": "ComfyUI 的应用数据目录。存储：\n- 日志\n- 服务器配置", "appPathLocationTooltip": "ComfyUI 的应用资产目录。存储 ComfyUI 代码和资产", - "cannotWrite": "无法写入所选路径", + "cannotWrite": "无法写入所选路径。", "chooseInstallationLocation": "选择安装位置", "customNodes": "自定义节点", - "customNodesDescription": "从现有的ComfyUI安装中重新安装自定义节点。", + "customNodesDescription": "引用现有 ComfyUI 安装的自定义节点文件并安装其依赖项。", "desktopAppSettings": "桌面应用设置", "desktopAppSettingsDescription": "配置 ComfyUI 在桌面上的行为。您可以稍后更改这些设置。", "desktopSettings": "桌面设置", @@ -172,11 +172,11 @@ "gpuSelection": { "cpuMode": "CPU 模式", "cpuModeDescription": "CPU 模式仅适用于开发者和极少数特殊情况。", - "cpuModeDescription2": "如果你不完全确定你需要这个，请忽略这个选项并在上面选择你的 GPU。", - "customComfyNeedsPython": "在 python 设置之前，ComfyUI 将无法工作", + "cpuModeDescription2": "如果你不完全确定你需要这个，忽略该选项并在上面选择你的 GPU。", + "customComfyNeedsPython": "在 python 完成设置前，ComfyUI 将无法工作", "customInstallRequirements": "安装所有需求和依赖项（例如：自定义 torch）", - "customManualVenv": "手动配置 python venv", - "customMayNotWork": "这完全不受支持，可能根本无法工作", + "customManualVenv": "手动配置 python 虚拟环境", + "customMayNotWork": "完全不支持，可能无法工作", "customSkipsPython": "此选项跳过正常的 python 设置。", "enableCpuMode": "启用 CPU 模式", "mpsDescription": "Apple Metal Performance Shaders 使用 pytorch nightly 支持。", @@ -185,29 +185,29 @@ "selectGpuDescription": "选择你拥有的 GPU 类型" }, "installLocation": "安装位置", - "installLocationDescription": "选择 ComfyUI 用户数据的目录。将安装一个 Python 环境到所选位置。请确保所选磁盘有足够的空间（约 15GB）。", + "installLocationDescription": "选择 ComfyUI 用户数据的存放目录。将安装一个 Python 环境到所选位置。请确保所选磁盘有足够的空间（约 15GB）。", "installLocationTooltip": "ComfyUI 的用户数据目录。存储：\n- Python 环境\n- 模型\n- 自定义节点\n", "insufficientFreeSpace": "空间不足 - 最小可用空间", "manualConfiguration": { "createVenv": "您需要在以下目录中创建虚拟环境", - "requirements": "需求", + "requirements": "依赖项", "restartWhenFinished": "配置虚拟环境完成后，请重新启动ComfyUI。", "title": "手动配置", "virtualEnvironmentPath": "虚拟环境路径" }, "migrateFromExistingInstallation": "从现有安装迁移", "migration": "迁移", - "migrationOptional": "迁移是可选的。如果您没有现有安装，可以跳过此步骤。", - "migrationSourcePathDescription": "如果您有现有的 ComfyUI 安装，我们可以将您的现有用户文件和模型复制/链接到新安装。", - "parentMissing": "路径不存在 - 首先创建包含目录", - "pathExists": "目录已存在 - 请确保您已备份所有数据", + "migrationOptional": "迁移是可选的。如果您之前没有安装过 ComfyUI，可以跳过此步骤。", + "migrationSourcePathDescription": "如果您有可用的 ComfyUI，我们可以将您的现有用户文件和模型复制/链接到新安装。", + "parentMissing": "路径不存在 - 请先创建包含该路径的目录", + "pathExists": "目录已存在 - 请确保您已备份全部数据", "pathValidationFailed": "路径验证失败", "selectItemsToMigrate": "选择要迁移的项目", "settings": { "allowMetrics": "崩溃报告", - "allowMetricsDescription": "通过发送匿名崩溃报告来帮助改善 ComfyUI。不会收集任何个人信息或工作流内容。您可以随时在设置菜单中禁用此功能。", + "allowMetricsDescription": "发送匿名崩溃报告帮助改善 ComfyUI。报告不会收集任何个人信息或工作流内容。您可以随时在设置菜单中禁用此功能。", "autoUpdate": "自动更新", - "autoUpdateDescription": "在更新可用时自动下载并安装更新。您将在安装更新之前始终收到通知。", + "autoUpdateDescription": "更新可用时自动更新。您将在安装更新之前收到通知。", "dataCollectionDialog": { "customNodeConfigurations": "自定义节点配置", "errorReports": "错误信息和堆栈跟踪", @@ -239,37 +239,37 @@ "instantTooltip": "工作流将会在生成完成后立即执行", "interrupt": "取消当前任务", "onChange": "更改时", - "onChangeTooltip": "一旦进行更改，工作流将被排队", + "onChangeTooltip": "一旦进行更改，工作流将添加到执行队列", "queue": "执行", - "queueWorkflow": "执行 (Shift 执行到队列首)", + "queueWorkflow": "执行 (Shift 添加到队列首)", "queueWorkflowFront": "执行到队列首", "refresh": "刷新节点", - "resetView": "重置画布视图", + "resetView": "重置视图", "showMenu": "显示菜单", "toggleBottomPanel": "底部面板" }, "menuLabels": { "About ComfyUI": "关于ComfyUI", "Browse Templates": "浏览模板", - "Bypass/Unbypass Selected Nodes": "旁路/取消旁路选定节点", - "Canvas Toggle Link Visibility": "切换链接可见性", - "Canvas Toggle Lock": "切换画布锁定", + "Bypass/Unbypass Selected Nodes": "忽略/取消忽略选定节点", + "Canvas Toggle Link Visibility": "切换连线可见性", + "Canvas Toggle Lock": "切换视图锁定", "Clear Pending Tasks": "清除待处理任务", "Clear Workflow": "清除工作流", - "Clipspace": "剪辑空间", + "Clipspace": "剪贴空间", "Collapse/Expand Selected Nodes": "折叠/展开选定节点", "Comfy-Org Discord": "Comfy-Org Discord", "ComfyUI Docs": "ComfyUI 文档", "ComfyUI Issues": "ComfyUI 问题", - "Convert selected nodes to group node": "将选定节点转换为组节点", - "Desktop User Guide": "桌面用户指南", + "Convert selected nodes to group node": "将选中节点转换为组节点", + "Desktop User Guide": "桌面端用户指南", "Edit": "编辑", "Export": "导出", "Export (API)": "导出 (API)", "Feedback": "反馈", "Fit Group To Contents": "适应组内容", - "Fit view to selected nodes": "适应视图到选定节点", - "Group Selected Nodes": "分组选定节点", + "Fit view to selected nodes": "适应视图到选中节点", + "Group Selected Nodes": "将选中节点转换为组节点", "Help": "帮助", "Interrupt": "中断", "Load Default Workflow": "加载默认工作流", @@ -288,8 +288,8 @@ "Pin/Unpin Selected Items": "固定/取消固定选定项目", "Pin/Unpin Selected Nodes": "固定/取消固定选定节点", "Previous Opened Workflow": "上一个打开的工作流", - "Queue Prompt": "队列提示", - "Queue Prompt (Front)": "队列提示 (前面)", + "Queue Prompt": "执行提示词", + "Queue Prompt (Front)": "执行提示词 (优先执行)", "Redo": "重做", "Refresh Node Definitions": "刷新节点定义", "Reinstall": "重新安装", @@ -309,10 +309,10 @@ "Toggle Theme (Dark/Light)": "切换主题（暗/亮）", "Toggle Workflows Sidebar": "切换工作流侧边栏", "Undo": "撤销", - "Ungroup selected group nodes": "取消选定组节点的分组", + "Ungroup selected group nodes": "解散选中组节点", "Workflow": "工作流", - "Zoom In": "放大", - "Zoom Out": "缩小" + "Zoom In": "放大画面", + "Zoom Out": "缩小画面" }, "nodeCategories": { "3d": "3d", @@ -325,35 +325,35 @@ "attention_experiments": "注意力实验", "audio": "音频", "batch": "批处理", - "clip": "剪辑", + "clip": "CLIP", "combine": "组合", "compositing": "合成", "cond pair": "条件对", - "cond single": "条件单个", - "conditioning": "条件处理", - "controlnet": "控制网络", + "cond single": "条件单", + "conditioning": "条件", + "controlnet": "ControlNet", "create": "创建", "custom_sampling": "自定义采样", "deprecated": "已弃用", - "flux": "flux", - "gligen": "生成", + "flux": "Flux", + "gligen": "GLIGEN", "guidance": "引导", "guiders": "引导器", - "hooks": "钩子", + "hooks": "约束", "image": "图像", - "inpaint": "修复", - "instructpix2pix": "指令图像到图像", - "latent": "潜空间", + "inpaint": "局部重绘", + "instructpix2pix": "InstructPix2Pix", + "latent": "Latent", "loaders": "加载器", "ltxv": "LTXV", "mask": "遮罩", "model": "模型", "model_merging": "模型合并", - "model_patches": "模型补丁", + "model_patches": "模型微调", "model_specific": "模型特定", - "noise": "噪声", + "noise": "噪波", "operations": "操作", - "photomaker": "photomaker", + "photomaker": "PhotoMaker", "postprocessing": "后处理", "preprocessors": "预处理器", "samplers": "采样器", @@ -361,8 +361,8 @@ "schedulers": "调度器", "scheduling": "调度", "sd3": "SD3", - "sigmas": "西格玛", - "stable_cascade": "稳定级联", + "sigmas": "Sigmas", + "stable_cascade": "StableCascade", "style_model": "风格模型", "transform": "变换", "unet": "U-Net", @@ -453,10 +453,10 @@ "name": "不将服务器输出打印到控制台。" }, "dont-upcast-attention": { - "name": "防止注意力上升" + "name": "不使用 upcast-attention" }, "enable-cors-header": { - "name": "启用 CORS 头：使用 \"*\" 代表所有来源或指定域名" + "name": "启用 CORS header：使用 \"*\" 代表所有来源或指定域名" }, "fast": { "name": "启用一些未经测试且可能降低质量的优化。" @@ -465,7 +465,7 @@ "name": "强制使用 channels-last 内存格式" }, "force-upcast-attention": { - "name": "强制注意力上升" + "name": "强制 upcast-attention" }, "global-precision": { "name": "全局浮点精度", @@ -497,7 +497,7 @@ }, "reserve-vram": { "name": "保留 VRAM (GB)", - "tooltip": "设置您希望为操作系统/其他软件保留的 VRAM 数量（以 GB 为单位）。默认情况下，根据您的操作系统保留一定数量。" + "tooltip": "设置您希望为操作系统/其他软件保留的 VRAM （GB）。默认会根据系统类型保留一定数量。" }, "text-encoder-precision": { "name": "文本编码器精度", @@ -539,20 +539,20 @@ "Appearance": "外观", "BrushAdjustment": "画笔调整", "Canvas": "画布", - "ColorPalette": "调色板", + "ColorPalette": "色彩主题", "Comfy": "Comfy", "Comfy-Desktop": "Comfy桌面版", - "CustomColorPalettes": "自定义颜色调色板", + "CustomColorPalettes": "自定义色彩主题", "DevMode": "开发模式", "EditTokenWeight": "编辑令牌权重", "Extension": "扩展", "General": "常规", - "Graph": "图", - "Group": "组", + "Graph": "画面", + "Group": "组节点", "Keybinding": "快捷键", - "Link": "链接", - "LinkRelease": "链接释放", - "LiteGraph": "Lite Graph", + "Link": "连线", + "LinkRelease": "释放链接", + "LiteGraph": "画面", "Locale": "区域设置", "Mask Editor": "遮罩编辑器", "Menu": "菜单", @@ -560,13 +560,13 @@ "NewEditor": "新编辑器", "Node": "节点", "Node Search Box": "节点搜索框", - "Node Widget": "节点小部件", + "Node Widget": "节点组件", "NodeInputConversionSubmenus": "节点输入转换子菜单", "NodeLibrary": "节点库", "Pointer": "指针", "Queue": "队列", - "QueueButton": "队列按钮", - "RerouteBeta": "重定向测试版", + "QueueButton": "执行按钮", + "RerouteBeta": "转接点 Beta", "Server": "服务器", "Server-Config": "服务器配置", "Settings": "设置", @@ -581,7 +581,7 @@ "downloads": "下载", "logout": "登出", "modelLibrary": "模型库", - "newBlankWorkflow": "创建一个新空白工作流", + "newBlankWorkflow": "创建空白工作流", "nodeLibrary": "节点库", "nodeLibraryTab": { "sortOrder": "排序顺序" @@ -628,16 +628,16 @@ }, "templateWorkflows": { "template": { - "default": "Image Generation", + "default": "默认", "flux_schnell": "Flux Schnell", - "image2image": "Image to Image", - "upscale": "2 Pass Upscale" + "image2image": "图像到图像", + "upscale": "2步放大" }, "title": "从模板开始" }, "userSelect": { "enterUsername": "输入用户名", - "existingUser": "已有用户", + "existingUser": "用户已存在", "newUser": "新用户", "next": "下一步", "selectUser": "选择用户" diff --git a/src/locales/zh/nodeDefs.json b/src/locales/zh/nodeDefs.json index 28530c513..3adb264fa 100644 --- a/src/locales/zh/nodeDefs.json +++ b/src/locales/zh/nodeDefs.json @@ -1,32 +1,32 @@ { "AddNoise": { - "display_name": "添加噪声", + "display_name": "添加噪波", "inputs": { "latent_image": { - "name": "潜空间图像" + "name": "Latent" }, "model": { "name": "模型" }, "noise": { - "name": "噪声" + "name": "噪波" }, "sigmas": { - "name": "西格玛" + "name": "Sigmas" } } }, "AlignYourStepsScheduler": { - "display_name": "对齐步骤调度器", + "display_name": "AlignYourSteps调度器", "inputs": { "denoise": { - "name": "去噪" + "name": "降噪" }, "model_type": { "name": "模型类型" }, "steps": { - "name": "步骤" + "name": "步数" } } }, @@ -45,7 +45,7 @@ "display_name": "基本调度器", "inputs": { "denoise": { - "name": "去噪" + "name": "降噪" }, "model": { "name": "模型" @@ -54,12 +54,12 @@ "name": "调度器" }, "steps": { - "name": "步骤" + "name": "步数" } } }, "BetaSamplingScheduler": { - "display_name": "贝塔采样调度器", + "display_name": "Beta采样调度器", "inputs": { "alpha": { "name": "阿尔法" @@ -71,7 +71,7 @@ "name": "模型" }, "steps": { - "name": "步骤" + "name": "步数" } } }, @@ -79,21 +79,21 @@ "display_name": "CFG引导器", "inputs": { "cfg": { - "name": "cfg" + "name": "CFG" }, "model": { "name": "模型" }, "negative": { - "name": "负面" + "name": "负面条件" }, "positive": { - "name": "正面" + "name": "正面条件" } } }, "CLIPAttentionMultiply": { - "display_name": "CLIP注意力乘法", + "display_name": "CLIP注意力相乘", "inputs": { "clip": { "name": "clip" @@ -113,11 +113,11 @@ } }, "CLIPLoader": { - "description": "[配方]\n\n稳定扩散：clip-l\n稳定级联：clip-g\nsd3：t5 / clip-g / clip-l\n稳定音频：t5\nmochi：t5", + "description": "[配方]\n\nStable Diffusion：clip-l\nStable Cascade：clip-g\nSD3：t5 / clip-g / clip-l\nStable Audio：t5\nMochi：t5", "display_name": "加载CLIP", "inputs": { "clip_name": { - "name": "clip名称" + "name": "CLIP名称" }, "type": { "name": "类型" @@ -125,7 +125,7 @@ } }, "CLIPMergeAdd": { - "display_name": "CLIP合并添加", + "display_name": "CLIP相加", "inputs": { "clip1": { "name": "clip1" @@ -136,7 +136,7 @@ } }, "CLIPMergeSimple": { - "display_name": "CLIP合并简单", + "display_name": "CLIP融合简易", "inputs": { "clip1": { "name": "clip1" @@ -150,7 +150,7 @@ } }, "CLIPMergeSubtract": { - "display_name": "CLIP合并减法", + "display_name": "CLIP相减", "inputs": { "clip1": { "name": "clip1" @@ -164,7 +164,7 @@ } }, "CLIPSave": { - "display_name": "保存CLIP", + "display_name": "CLIP保存", "inputs": { "clip": { "name": "clip" @@ -181,13 +181,13 @@ "name": "clip" }, "stop_at_clip_layer": { - "name": "停止在clip层" + "name": "停止在CLIP层" } } }, "CLIPTextEncode": { - "description": "使用CLIP模型对文本提示进行编码，生成可以引导扩散模型生成特定图像的嵌入。", - "display_name": "CLIP文本编码（提示）", + "description": "使用 CLIP 模型将文本编码成嵌入组（embedding），用于引导扩散模型生成图像。", + "display_name": "CLIP文本编码", "inputs": { "clip": { "name": "clip", @@ -205,7 +205,7 @@ } }, "CLIPTextEncodeControlnet": { - "display_name": "CLIP文本编码控制网", + "display_name": "CLIP文本编码ControlNet", "inputs": { "clip": { "name": "clip" @@ -250,11 +250,11 @@ } }, "CLIPTextEncodePixArtAlpha": { - "description": "对文本进行编码并为PixArt Alpha设置分辨率条件。不适用于PixArt Sigma。", + "description": "编码文本并设置PixArt Alpha的分辨率条件。不适用于PixArt Sigma。", "display_name": "CLIPTextEncodePixArtAlpha", "inputs": { "clip": { - "name": "clip" + "name": "剪辑" }, "height": { "name": "高度" @@ -323,7 +323,7 @@ "display_name": "CLIP文本编码SDXL精炼器", "inputs": { "ascore": { - "name": "ascore" + "name": "美学分数" }, "clip": { "name": "clip" @@ -376,10 +376,10 @@ } }, "CheckpointLoader": { - "display_name": "加载检查点配置（已弃用）", + "display_name": "Ckeckpoint加载器（已弃用）", "inputs": { "ckpt_name": { - "name": "检查点名称" + "name": "Checkpoint名称" }, "config_name": { "name": "配置名称" @@ -387,28 +387,28 @@ } }, "CheckpointLoaderSimple": { - "description": "加载扩散模型检查点，扩散模型用于去噪潜空间图像。", - "display_name": "加载检查点", + "description": "加载扩散模型 Checkpoint，用于去除 Latent 噪波。", + "display_name": "Checkpoint加载器（简易）", "inputs": { "ckpt_name": { - "name": "检查点名称", - "tooltip": "要加载的检查点（模型）的名称。" + "name": "Checkpoint名称", + "tooltip": "要加载的Checkpoint模型的名称。" } }, "outputs": { "0": { - "tooltip": "用于去噪潜空间变量的模型。" + "tooltip": "用于去除 Latent 噪波的模型。" }, "1": { - "tooltip": "用于编码文本提示的CLIP模型。" + "tooltip": "用于编码文本提示的 CLIP 模型。" }, "2": { - "tooltip": "用于将图像编码和解码到潜空间空间的VAE模型。" + "tooltip": "用于将图像编码和解码到 Latent 的 VAE 模型。" } } }, "CheckpointSave": { - "display_name": "保存检查点", + "display_name": "保存Checkpoint", "inputs": { "clip": { "name": "clip" @@ -425,59 +425,59 @@ } }, "CombineHooks2": { - "display_name": "组合钩子 [2]", + "display_name": "组合约束 [2]", "inputs": { "hooks_A": { - "name": "钩子_A" + "name": "约束_A" }, "hooks_B": { - "name": "钩子_B" + "name": "约束_B" } } }, "CombineHooks4": { - "display_name": "组合钩子 [4]", + "display_name": "组合约束 [4]", "inputs": { "hooks_A": { - "name": "钩子_A" + "name": "约束_A" }, "hooks_B": { - "name": "钩子_B" + "name": "约束_B" }, "hooks_C": { - "name": "钩子_C" + "name": "约束_C" }, "hooks_D": { - "name": "钩子_D" + "name": "约束_D" } } }, "CombineHooks8": { - "display_name": "组合钩子 [8]", + "display_name": "组合约束 [8]", "inputs": { "hooks_A": { - "name": "钩子_A" + "name": "约束_A" }, "hooks_B": { - "name": "钩子_B" + "name": "约束_B" }, "hooks_C": { - "name": "钩子_C" + "name": "约束_C" }, "hooks_D": { - "name": "钩子_D" + "name": "约束_D" }, "hooks_E": { - "name": "钩子_E" + "name": "约束_E" }, "hooks_F": { - "name": "钩子_F" + "name": "约束_F" }, "hooks_G": { - "name": "钩子_G" + "name": "约束_G" }, "hooks_H": { - "name": "钩子_H" + "name": "约束_H" } } }, @@ -485,43 +485,43 @@ "display_name": "条件平均", "inputs": { "conditioning_from": { - "name": "条件化从" + "name": "条件从" }, "conditioning_to": { - "name": "条件化到" + "name": "条件到" }, "conditioning_to_strength": { - "name": "条件化到强度" + "name": "条件到强度" } } }, "ConditioningCombine": { - "display_name": "条件（组合）", + "display_name": "条件合并", "inputs": { "conditioning_1": { - "name": "条件化_1" + "name": "条件_1" }, "conditioning_2": { - "name": "条件化_2" + "name": "条件_2" } } }, "ConditioningConcat": { - "display_name": "条件（连接）", + "display_name": "条件连接", "inputs": { "conditioning_from": { - "name": "条件化从" + "name": "条件从" }, "conditioning_to": { - "name": "条件化到" + "name": "条件到" } } }, "ConditioningSetArea": { - "display_name": "条件（设置区域）", + "display_name": "条件采样区域", "inputs": { "conditioning": { - "name": "条件化" + "name": "条件" }, "height": { "name": "高度" @@ -541,7 +541,7 @@ } }, "ConditioningSetAreaPercentage": { - "display_name": "条件（按百分比设置区域）", + "display_name": "条件采样区域（系数）", "inputs": { "conditioning": { "name": "条件化" @@ -564,7 +564,7 @@ } }, "ConditioningSetAreaStrength": { - "display_name": "条件设置区域强度", + "display_name": "条件采样区域强度", "inputs": { "conditioning": { "name": "条件化" @@ -575,7 +575,7 @@ } }, "ConditioningSetDefaultCombine": { - "display_name": "条件设置默认组合", + "display_name": "条件设置默认合并", "inputs": { "cond": { "name": "条件" @@ -584,12 +584,12 @@ "name": "默认条件" }, "hooks": { - "name": "钩子" + "name": "约束" } } }, "ConditioningSetMask": { - "display_name": "条件（设置遮罩）", + "display_name": "条件遮罩", "inputs": { "conditioning": { "name": "条件化" @@ -612,7 +612,7 @@ "name": "新条件" }, "hooks": { - "name": "钩子" + "name": "约束" }, "mask": { "name": "遮罩" @@ -624,12 +624,12 @@ "name": "强度" }, "timesteps": { - "name": "时间步" + "name": "间隔" } } }, "ConditioningSetPropertiesAndCombine": { - "display_name": "条件设置属性组合", + "display_name": "条件设置属性合并", "inputs": { "cond": { "name": "条件" @@ -638,7 +638,7 @@ "name": "新条件" }, "hooks": { - "name": "钩子" + "name": "约束" }, "mask": { "name": "遮罩" @@ -650,12 +650,12 @@ "name": "强度" }, "timesteps": { - "name": "时间步" + "name": "间隔" } } }, "ConditioningSetTimestepRange": { - "display_name": "条件设置时间步范围", + "display_name": "设置条件时间", "inputs": { "conditioning": { "name": "条件" @@ -672,10 +672,10 @@ "display_name": "StableAudio条件", "inputs": { "negative": { - "name": "负向" + "name": "负面条件" }, "positive": { - "name": "正向" + "name": "正面条件" }, "seconds_start": { "name": "开始秒数" @@ -686,15 +686,15 @@ }, "outputs": { "0": { - "name": "正向" + "name": "正面条件" }, "1": { - "name": "负向" + "name": "负面条件" } } }, "ConditioningTimestepsRange": { - "display_name": "时间步范围", + "display_name": "条件间隔范围", "inputs": { "end_percent": { "name": "结束百分比" @@ -721,13 +721,13 @@ } }, "ControlNetApply": { - "display_name": "应用控制网（旧）", + "display_name": "应用ControlNet（旧版）", "inputs": { "conditioning": { "name": "条件" }, "control_net": { - "name": "控制网" + "name": "ControlNet" }, "image": { "name": "图像" @@ -738,10 +738,10 @@ } }, "ControlNetApplyAdvanced": { - "display_name": "应用控制网", + "display_name": "应用ControlNet（旧版高级）", "inputs": { "control_net": { - "name": "控制网" + "name": "ControlNet" }, "end_percent": { "name": "结束百分比" @@ -750,10 +750,10 @@ "name": "图像" }, "negative": { - "name": "负面" + "name": "负面条件" }, "positive": { - "name": "正面" + "name": "正面条件" }, "start_percent": { "name": "开始百分比" @@ -767,18 +767,18 @@ }, "outputs": { "0": { - "name": "正面" + "name": "正面条件" }, "1": { - "name": "负面" + "name": "负面条件" } } }, "ControlNetApplySD3": { - "display_name": "应用控制网与VAE", + "display_name": "应用ControlNet", "inputs": { "control_net": { - "name": "控制网" + "name": "ControlNet" }, "end_percent": { "name": "结束百分比" @@ -787,10 +787,10 @@ "name": "图像" }, "negative": { - "name": "负面" + "name": "负面条件" }, "positive": { - "name": "正面" + "name": "正面条件" }, "start_percent": { "name": "开始百分比" @@ -804,18 +804,18 @@ }, "outputs": { "0": { - "name": "正面" + "name": "正面条件" }, "1": { - "name": "负面" + "name": "负面条件" } } }, "ControlNetInpaintingAliMamaApply": { - "display_name": "控制网修复AliMama应用", + "display_name": "应用ControlNet（阿里妈妈局部重绘）", "inputs": { "control_net": { - "name": "控制网" + "name": "ControlNet" }, "end_percent": { "name": "结束百分比" @@ -827,10 +827,10 @@ "name": "遮罩" }, "negative": { - "name": "负面" + "name": "负面条件" }, "positive": { - "name": "正面" + "name": "正面条件" }, "start_percent": { "name": "开始百分比" @@ -844,26 +844,26 @@ }, "outputs": { "0": { - "name": "正面" + "name": "正面条件" }, "1": { - "name": "负面" + "name": "负面条件" } } }, "ControlNetLoader": { - "display_name": "加载控制网模型", + "display_name": "加载ControlNet模型", "inputs": { "control_net_name": { - "name": "控制网名称" + "name": "ControlNet名称" } } }, "CreateHookKeyframe": { - "display_name": "创建钩子关键帧", + "display_name": "创建约束关键帧", "inputs": { "prev_hook_kf": { - "name": "前一个钩子关键帧" + "name": "前一个约束关键帧" }, "start_percent": { "name": "开始百分比" @@ -874,12 +874,12 @@ }, "outputs": { "0": { - "name": "钩子关键帧" + "name": "约束关键帧" } } }, "CreateHookKeyframesFromFloats": { - "display_name": "从浮点数创建钩子关键帧", + "display_name": "从浮点数创建约束关键帧", "inputs": { "end_percent": { "name": "结束百分比" @@ -888,7 +888,7 @@ "name": "浮点强度" }, "prev_hook_kf": { - "name": "前一个钩子关键帧" + "name": "前一个约束关键帧" }, "print_keyframes": { "name": "打印关键帧" @@ -899,12 +899,12 @@ }, "outputs": { "0": { - "name": "钩子关键帧" + "name": "约束关键帧" } } }, "CreateHookKeyframesInterpolated": { - "display_name": "创建插值钩子关键帧", + "display_name": "创建约束关键帧插值", "inputs": { "end_percent": { "name": "结束百分比" @@ -916,7 +916,7 @@ "name": "关键帧数量" }, "prev_hook_kf": { - "name": "前一个钩子关键帧" + "name": "前一个约束关键帧" }, "print_keyframes": { "name": "打印关键帧" @@ -933,21 +933,21 @@ }, "outputs": { "0": { - "name": "钩子关键帧" + "name": "约束关键帧" } } }, "CreateHookLora": { - "display_name": "创建钩子LoRA", + "display_name": "创建约束LoRA", "inputs": { "lora_name": { - "name": "lora名称" + "name": "LoRA名称" }, "prev_hooks": { - "name": "前一个钩子" + "name": "前一个约束" }, "strength_clip": { - "name": "剪辑强度" + "name": "CLIP强度" }, "strength_model": { "name": "模型强度" @@ -955,13 +955,13 @@ } }, "CreateHookLoraModelOnly": { - "display_name": "仅创建钩子LoRA（MO）", + "display_name": "创建约束LoRA（仅模型）", "inputs": { "lora_name": { - "name": "lora名称" + "name": "LoRA名称" }, "prev_hooks": { - "name": "前一个钩子" + "name": "前一个约束" }, "strength_model": { "name": "模型强度" @@ -969,16 +969,16 @@ } }, "CreateHookModelAsLora": { - "display_name": "创建钩子模型作为LoRA", + "display_name": "创建约束模型为LoRA", "inputs": { "ckpt_name": { - "name": "ckpt名称" + "name": "Checkpoint名称" }, "prev_hooks": { - "name": "前一个钩子" + "name": "前一个约束" }, "strength_clip": { - "name": "剪辑强度" + "name": "CLIP强度" }, "strength_model": { "name": "模型强度" @@ -986,13 +986,13 @@ } }, "CreateHookModelAsLoraModelOnly": { - "display_name": "仅创建钩子模型作为LoRA（MO）", + "display_name": "创建约束模型为LoRA（仅模型）", "inputs": { "ckpt_name": { - "name": "ckpt名称" + "name": "Checkpoint名称" }, "prev_hooks": { - "name": "前一个钩子" + "name": "前一个约束" }, "strength_model": { "name": "模型强度" @@ -1133,10 +1133,10 @@ } }, "DiffControlNetLoader": { - "display_name": "加载控制网模型（diff）", + "display_name": "加载ControlNet模型（diff）", "inputs": { "control_net_name": { - "name": "控制网络名称" + "name": "ControlNet名称" }, "model": { "name": "模型" @@ -1144,7 +1144,7 @@ } }, "DifferentialDiffusion": { - "display_name": "差分扩散", + "display_name": "差异扩散DifferentialDiffusion", "inputs": { "model": { "name": "模型" @@ -1152,7 +1152,7 @@ } }, "DiffusersLoader": { - "display_name": "扩散器加载器", + "display_name": "Diffusers加载器", "inputs": { "model_path": { "name": "模型路径" @@ -1160,40 +1160,40 @@ } }, "DisableNoise": { - "display_name": "禁用噪声" + "display_name": "禁用噪波" }, "DualCFGGuider": { "display_name": "双CFG引导器", "inputs": { "cfg_cond2_negative": { - "name": "cfg_cond2_negative" + "name": "cfg_条件2_负面" }, "cfg_conds": { - "name": "cfg_conds" + "name": "cfg_条件1" }, "cond1": { - "name": "cond1" + "name": "条件1" }, "cond2": { - "name": "cond2" + "name": "条件2" }, "model": { "name": "模型" }, "negative": { - "name": "负面" + "name": "负面条件" } } }, "DualCLIPLoader": { - "description": "[配方]\n\nsdxl：clip-l，clip-g\nsd3：clip-l，clip-g / clip-l，t5 / clip-g，t5\nflux：clip-l，t5", + "description": "[配方]\n\nSDXL：clip-l，clip-g\nSD3：clip-l，clip-g / clip-l，t5 / clip-g，t5\nFlux：clip-l，t5", "display_name": "双CLIP加载器", "inputs": { "clip_name1": { - "name": "clip_name1" + "name": "CLIP名称1" }, "clip_name2": { - "name": "clip_name2" + "name": "CLIP名称2" }, "type": { "name": "类型" @@ -1201,7 +1201,7 @@ } }, "EmptyHunyuanLatentVideo": { - "display_name": "空的混元潜在视频", + "display_name": "空Latent视频（混元）", "inputs": { "batch_size": { "name": "批量大小" @@ -1235,7 +1235,7 @@ } }, "EmptyLTXVLatentVideo": { - "display_name": "空LTXV潜空间视频", + "display_name": "空Latent视频（LTXV）", "inputs": { "batch_size": { "name": "批量大小" @@ -1252,11 +1252,11 @@ } }, "EmptyLatentAudio": { - "display_name": "空潜空间音频", + "display_name": "空Latent音频", "inputs": { "batch_size": { "name": "批量大小", - "tooltip": "批次中的潜空间图像数量。" + "tooltip": "批次中的Latent数量。" }, "seconds": { "name": "秒" @@ -1264,30 +1264,30 @@ } }, "EmptyLatentImage": { - "description": "创建一批新的空潜空间图像，以通过采样进行去噪。", - "display_name": "空潜空间图像", + "description": "创建一批新的空Latent图像，以通过采样进行降噪。", + "display_name": "空Latent图像", "inputs": { "batch_size": { "name": "批量大小", - "tooltip": "批次中的潜空间图像数量。" + "tooltip": "批次中的Latent数量。" }, "height": { "name": "高度", - "tooltip": "潜空间图像的高度（以像素为单位）。" + "tooltip": "Latent图像的高度（像素）。" }, "width": { "name": "宽度", - "tooltip": "潜空间图像的宽度（以像素为单位）。" + "tooltip": "Latent图像的宽度（像素）。" } }, "outputs": { "0": { - "tooltip": "空的潜空间图像批次。" + "tooltip": "空Latent图像批次。" } } }, "EmptyMochiLatentVideo": { - "display_name": "空Mochi潜空间视频", + "display_name": "空Latent视频（Mochi）", "inputs": { "batch_size": { "name": "批量大小" @@ -1304,7 +1304,7 @@ } }, "EmptySD3LatentImage": { - "display_name": "空SD3潜空间图像", + "display_name": "空Latent图像（SD3）", "inputs": { "batch_size": { "name": "批量大小" @@ -1318,21 +1318,21 @@ } }, "ExponentialScheduler": { - "display_name": "指数调度器", + "display_name": "Exponential调度器", "inputs": { "sigma_max": { - "name": "sigma_max" + "name": "最大Sigma" }, "sigma_min": { - "name": "sigma_min" + "name": "最新Sigma" }, "steps": { - "name": "步骤" + "name": "步数" } } }, "FeatherMask": { - "display_name": "羽毛遮罩", + "display_name": "羽化遮罩", "inputs": { "bottom": { "name": "底" @@ -1417,10 +1417,10 @@ "name": "系数" }, "denoise": { - "name": "去噪" + "name": "降噪" }, "steps": { - "name": "步骤" + "name": "步数" } } }, @@ -1428,7 +1428,7 @@ "display_name": "GLIGEN加载器", "inputs": { "gligen_name": { - "name": "gligen_name" + "name": "gligen名称" } } }, @@ -1436,13 +1436,13 @@ "display_name": "GLIGEN文本框应用", "inputs": { "clip": { - "name": "剪辑" + "name": "CLIPCLIP" }, "conditioning_to": { "name": "条件到" }, "gligen_textbox_model": { - "name": "gligen_textbox_model" + "name": "GLIGEN文本框模型" }, "height": { "name": "高度" @@ -1471,12 +1471,12 @@ "name": "遮罩" }, "tapered_corners": { - "name": "锥形角" + "name": "倒角" } } }, "HyperTile": { - "display_name": "超平铺", + "display_name": "超分块HyperTile", "inputs": { "max_depth": { "name": "最大深度" @@ -1488,10 +1488,10 @@ "name": "规模深度" }, "swap_size": { - "name": "交换大小" + "name": "分割尺寸" }, "tile_size": { - "name": "瓷砖大小" + "name": "分块尺寸" } } }, @@ -1499,7 +1499,7 @@ "display_name": "超网络加载器", "inputs": { "hypernetwork_name": { - "name": "hypernetwork_name" + "name": "HyperNetwork名称" }, "model": { "name": "模型" @@ -1510,7 +1510,7 @@ } }, "ImageBatch": { - "display_name": "图像批处理", + "display_name": "组合图像批次", "inputs": { "image1": { "name": "图像1" @@ -1521,10 +1521,10 @@ } }, "ImageBlend": { - "display_name": "图像混合", + "display_name": "混合图像", "inputs": { "blend_factor": { - "name": "混合因子" + "name": "系数" }, "blend_mode": { "name": "混合模式" @@ -1538,7 +1538,7 @@ } }, "ImageBlur": { - "display_name": "图像模糊", + "display_name": "模糊图像", "inputs": { "blur_radius": { "name": "模糊半径" @@ -1563,19 +1563,19 @@ } }, "ImageCompositeMasked": { - "display_name": "图像合成遮罩", + "display_name": "合成图像（遮罩）", "inputs": { "destination": { - "name": "目的地" + "name": "目标图像" }, "mask": { "name": "遮罩" }, "resize_source": { - "name": "调整来源大小" + "name": "缩放来源图像" }, "source": { - "name": "来源" + "name": "来源图像" }, "x": { "name": "x" @@ -1586,7 +1586,7 @@ } }, "ImageCrop": { - "display_name": "图像裁剪", + "display_name": "裁剪图像", "inputs": { "height": { "name": "高度" @@ -1628,15 +1628,15 @@ } }, "ImageOnlyCheckpointLoader": { - "display_name": "仅图像检查点加载器（img2vid模型）", + "display_name": "Checkpoint加载器（仅图像）", "inputs": { "ckpt_name": { - "name": "ckpt名称" + "name": "Checkpoint名称" } } }, "ImageOnlyCheckpointSave": { - "display_name": "仅图像检查点保存", + "display_name": "保存Checkpoint（仅图像）", "inputs": { "clip_vision": { "name": "clip视觉" @@ -1653,7 +1653,7 @@ } }, "ImagePadForOutpaint": { - "display_name": "为外绘填充图像", + "display_name": "外补画板", "inputs": { "bottom": { "name": "下" @@ -1676,7 +1676,7 @@ } }, "ImageQuantize": { - "display_name": "图像量化", + "display_name": "量化图像", "inputs": { "colors": { "name": "颜色" @@ -1690,7 +1690,7 @@ } }, "ImageScale": { - "display_name": "图像放大", + "display_name": "缩放图像", "inputs": { "crop": { "name": "裁剪" @@ -1702,7 +1702,7 @@ "name": "图像" }, "upscale_method": { - "name": "放大方法" + "name": "缩放算法" }, "width": { "name": "宽度" @@ -1710,38 +1710,38 @@ } }, "ImageScaleBy": { - "display_name": "按比例放大图像", + "display_name": "缩放图像（比例）", "inputs": { "image": { "name": "图像" }, "scale_by": { - "name": "按比例放大" + "name": "缩放系数" }, "upscale_method": { - "name": "放大方法" + "name": "缩放算法" } } }, "ImageScaleToTotalPixels": { - "display_name": "将图像缩放到总像素", + "display_name": "缩放图像（像素）", "inputs": { "image": { "name": "图像" }, "megapixels": { - "name": "百万像素" + "name": "像素数量" }, "upscale_method": { - "name": "放大方法" + "name": "缩放算法" } } }, "ImageSharpen": { - "display_name": "图像锐化", + "display_name": "锐化图像", "inputs": { "alpha": { - "name": "阿尔法" + "name": "alpha" }, "image": { "name": "图像" @@ -1750,12 +1750,12 @@ "name": "锐化半径" }, "sigma": { - "name": "西格玛" + "name": "Sigma" } } }, "ImageToMask": { - "display_name": "将图像转换为遮罩", + "display_name": "图像转换为遮罩", "inputs": { "channel": { "name": "通道" @@ -1777,23 +1777,23 @@ } }, "InpaintModelConditioning": { - "display_name": "修复模型条件", + "display_name": "内补模型条件", "inputs": { "mask": { "name": "遮罩" }, "negative": { - "name": "负" + "name": "负面条件" }, "noise_mask": { - "name": "噪声遮罩", - "tooltip": "向潜空间图像添加噪声遮罩，以便采样仅在遮罩内进行。根据模型的不同，可能会改善结果或完全破坏效果。" + "name": "噪波遮罩", + "tooltip": "向Latent图像添加遮罩，采样仅在遮罩内进行。根据模型的不同，可能会改善结果或完全破坏效果。" }, "pixels": { "name": "像素" }, "positive": { - "name": "正" + "name": "正面条件" }, "vae": { "name": "vae" @@ -1801,27 +1801,27 @@ }, "outputs": { "0": { - "name": "正面" + "name": "正面条件" }, "1": { - "name": "负面" + "name": "负面条件" }, "2": { - "name": "潜空间" + "name": "Latent" } } }, "InstructPixToPixConditioning": { - "display_name": "指令像素到像素条件", + "display_name": "InstructPixToPix条件", "inputs": { "negative": { - "name": "负" + "name": "负面条件" }, "pixels": { "name": "像素" }, "positive": { - "name": "正" + "name": "正面条件" }, "vae": { "name": "vae" @@ -1829,13 +1829,13 @@ }, "outputs": { "0": { - "name": "正面" + "name": "正面条件" }, "1": { - "name": "负面" + "name": "负面条件" }, "2": { - "name": "潜空间" + "name": "Latent" } } }, @@ -1848,7 +1848,7 @@ } }, "JoinImageWithAlpha": { - "display_name": "与Alpha合并图像", + "display_name": "合并图像Alpha", "inputs": { "alpha": { "name": "阿尔法" @@ -1859,53 +1859,53 @@ } }, "KSampler": { - "description": "使用提供的模型、正向和负向条件去噪潜空间图像。", + "description": "使用提供的模型、正面条件和负面条件条件降噪Latent图像。", "display_name": "K采样器", "inputs": { "cfg": { "name": "cfg", - "tooltip": "无分类器引导比例平衡创造力和对提示的遵循。更高的值会导致图像更接近提示，但过高的值会对质量产生负面影响。" + "tooltip": "用于平衡随机性和提示词服从性。提高该值会使结果更加符合提示词，但过高会导致图像质量下降。" }, "denoise": { - "name": "去噪", - "tooltip": "应用的去噪量，较低的值将保持初始图像的结构，允许图像到图像的采样。" + "name": "降噪", + "tooltip": "降噪的强度，降低该值会保留原图的大部分内容从而实现图生图。" }, "latent_image": { - "name": "潜空间图像", - "tooltip": "要去噪的潜空间图像。" + "name": "Latent图像", + "tooltip": "要降噪的 Latent 图像。" }, "model": { "name": "模型", - "tooltip": "用于去噪输入潜空间图像的模型。" + "tooltip": "用于降噪输入 Latent 图像的模型。" }, "negative": { - "name": "负", - "tooltip": "描述您希望在图像中排除的属性的条件。" + "name": "负面条件", + "tooltip": "描述不包含在图像中的内容的条件。" }, "positive": { - "name": "正", - "tooltip": "描述您希望在图像中包含的属性的条件。" + "name": "正面条件", + "tooltip": "描述包含在图像中的内容的条件。" }, "sampler_name": { "name": "采样器名称", - "tooltip": "在采样时使用的算法，这会影响生成输出的质量、速度和风格。" + "tooltip": "采样算法，会影响结果质量、生成速度、风格样式。" }, "scheduler": { "name": "调度器", - "tooltip": "调度器控制噪声如何逐渐去除以形成图像。" + "tooltip": "控制逐渐移除噪波的方法。" }, "seed": { "name": "种子", - "tooltip": "用于生成噪声的随机种子。" + "tooltip": "生成噪波的随机种。" }, "steps": { - "name": "步骤", - "tooltip": "去噪过程中使用的步骤数量。" + "name": "步数", + "tooltip": "降噪的步数。" } }, "outputs": { "0": { - "tooltip": "去噪后的潜空间变量。" + "tooltip": "降噪后的 Latent。" } } }, @@ -1913,31 +1913,31 @@ "display_name": "K采样器（高级）", "inputs": { "add_noise": { - "name": "添加噪声" + "name": "添加噪波" }, "cfg": { "name": "cfg" }, "end_at_step": { - "name": "结束步骤" + "name": "结束步数" }, "latent_image": { - "name": "潜空间图像" + "name": "Latent图像" }, "model": { "name": "模型" }, "negative": { - "name": "负" + "name": "负面条件" }, "noise_seed": { - "name": "噪声种子" + "name": "随机种" }, "positive": { - "name": "正" + "name": "正面条件" }, "return_with_leftover_noise": { - "name": "返回剩余噪声" + "name": "返回剩余噪波" }, "sampler_name": { "name": "采样器名称" @@ -1946,10 +1946,10 @@ "name": "调度器" }, "start_at_step": { - "name": "开始步骤" + "name": "开始步数" }, "steps": { - "name": "步骤" + "name": "步数" } } }, @@ -1974,7 +1974,7 @@ "name": "sigma_min" }, "steps": { - "name": "步骤" + "name": "步数" } } }, @@ -1985,18 +1985,18 @@ "name": "帧率" }, "negative": { - "name": "负面" + "name": "负面条件" }, "positive": { - "name": "正面" + "name": "正面条件" } }, "outputs": { "0": { - "name": "正面" + "name": "正面条件" }, "1": { - "name": "负面" + "name": "负面条件" } } }, @@ -2013,17 +2013,17 @@ "name": "图像" }, "image_noise_scale": { - "name": "图像噪声比例", - "tooltip": "在条件图像潜空间图像上应用的噪声量。" + "name": "图像噪波比例", + "tooltip": "在条件图像Latent图像上应用的噪波量。" }, "length": { "name": "长度" }, "negative": { - "name": "负面" + "name": "负面条件" }, "positive": { - "name": "正面" + "name": "正面条件" }, "vae": { "name": "vae" @@ -2034,13 +2034,13 @@ }, "outputs": { "0": { - "name": "正面" + "name": "正面条件" }, "1": { - "name": "负面" + "name": "负面条件" }, "2": { - "name": "潜空间" + "name": "Latent" } } }, @@ -2051,26 +2051,26 @@ "name": "基础移位" }, "latent": { - "name": "潜空间" + "name": "Latent" }, "max_shift": { "name": "最大移位" }, "steps": { - "name": "步骤" + "name": "步数" }, "stretch": { "name": "拉伸", - "tooltip": "将 sigma 拉伸到范围 [terminal, 1]。" + "tooltip": "将 sigma 拉伸到范围 [终值, 1]。" }, "terminal": { - "name": "终端", + "name": "终值", "tooltip": "拉伸后 sigma 的终值。" } } }, "LaplaceScheduler": { - "display_name": "拉普拉斯调度器", + "display_name": "Laplace调度器", "inputs": { "beta": { "name": "beta" @@ -2085,34 +2085,34 @@ "name": "sigma_min" }, "steps": { - "name": "步骤" + "name": "步数" } } }, "LatentAdd": { - "display_name": "潜空间添加", + "display_name": "Latent相加", "inputs": { "samples1": { - "name": "样本1" + "name": "Latent1" }, "samples2": { - "name": "样本2" + "name": "Latent2" } } }, "LatentApplyOperation": { - "display_name": "潜空间应用操作", + "display_name": "Latent应用操作", "inputs": { "operation": { "name": "操作" }, "samples": { - "name": "样本" + "name": "Latent" } } }, "LatentApplyOperationCFG": { - "display_name": "潜空间应用操作CFG", + "display_name": "Latent应用操作CFG", "inputs": { "model": { "name": "模型" @@ -2123,52 +2123,52 @@ } }, "LatentBatch": { - "display_name": "潜空间批处理", + "display_name": "组合Latent批次", "inputs": { "samples1": { - "name": "样本1" + "name": "Latent1" }, "samples2": { - "name": "样本2" + "name": "Latent2" } } }, "LatentBatchSeedBehavior": { - "display_name": "潜空间批处理种子行为", + "display_name": "Latent批处理随机种行为", "inputs": { "samples": { - "name": "样本" + "name": "Latent" }, "seed_behavior": { - "name": "种子行为" + "name": "随机种行为" } } }, "LatentBlend": { - "display_name": "潜空间混合", + "display_name": "混合Latent", "inputs": { "blend_factor": { - "name": "混合因子" + "name": "系数" }, "samples1": { - "name": "样本1" + "name": "Latent1" }, "samples2": { - "name": "样本2" + "name": "Latent2" } } }, "LatentComposite": { - "display_name": "潜空间合成", + "display_name": "合成Latent", "inputs": { "feather": { "name": "羽化" }, "samples_from": { - "name": "样本从" + "name": "Latent从" }, "samples_to": { - "name": "样本到" + "name": "Latent到" }, "x": { "name": "x" @@ -2179,10 +2179,10 @@ } }, "LatentCompositeMasked": { - "display_name": "潜空间合成遮罩", + "display_name": "合成Latent遮罩", "inputs": { "destination": { - "name": "目的地" + "name": "目标Latent" }, "mask": { "name": "遮罩" @@ -2191,7 +2191,7 @@ "name": "调整来源大小" }, "source": { - "name": "来源" + "name": "来源Latent" }, "x": { "name": "x" @@ -2202,13 +2202,13 @@ } }, "LatentCrop": { - "display_name": "裁剪潜空间", + "display_name": "裁剪Latent", "inputs": { "height": { "name": "高度" }, "samples": { - "name": "样本" + "name": "Latent" }, "width": { "name": "宽度" @@ -2222,18 +2222,18 @@ } }, "LatentFlip": { - "display_name": "翻转潜空间", + "display_name": "翻转Latent", "inputs": { "flip_method": { "name": "翻转方法" }, "samples": { - "name": "样本" + "name": "Latent" } } }, "LatentFromBatch": { - "display_name": "从批次获取潜空间", + "display_name": "从批次获取Latent", "inputs": { "batch_index": { "name": "批次索引" @@ -2242,37 +2242,37 @@ "name": "长度" }, "samples": { - "name": "样本" + "name": "Latent" } } }, "LatentInterpolate": { - "display_name": "潜空间插值", + "display_name": "Latent插值", "inputs": { "ratio": { "name": "比率" }, "samples1": { - "name": "样本1" + "name": "Latent1" }, "samples2": { - "name": "样本2" + "name": "Latent2" } } }, "LatentMultiply": { - "display_name": "潜空间乘法", + "display_name": "Latent相乘", "inputs": { "multiplier": { "name": "乘数" }, "samples": { - "name": "样本" + "name": "Latent" } } }, "LatentOperationSharpen": { - "display_name": "潜空间操作锐化", + "display_name": "Latent操作锐化", "inputs": { "alpha": { "name": "阿尔法" @@ -2286,7 +2286,7 @@ } }, "LatentOperationTonemapReinhard": { - "display_name": "潜空间操作色调映射Reinhard", + "display_name": "Latent操作色调映射Reinhard", "inputs": { "multiplier": { "name": "乘数" @@ -2294,29 +2294,29 @@ } }, "LatentRotate": { - "display_name": "旋转潜空间", + "display_name": "旋转Latent", "inputs": { "rotation": { "name": "旋转" }, "samples": { - "name": "样本" + "name": "Latent" } } }, "LatentSubtract": { - "display_name": "潜空间减法", + "display_name": "Latent相减", "inputs": { "samples1": { - "name": "样本1" + "name": "Latent1" }, "samples2": { - "name": "样本2" + "name": "Latent2" } } }, "LatentUpscale": { - "display_name": "放大潜空间", + "display_name": "缩放Latent", "inputs": { "crop": { "name": "裁剪" @@ -2325,10 +2325,10 @@ "name": "高度" }, "samples": { - "name": "样本" + "name": "Latent" }, "upscale_method": { - "name": "放大方法" + "name": "缩放算法" }, "width": { "name": "宽度" @@ -2336,16 +2336,16 @@ } }, "LatentUpscaleBy": { - "display_name": "按比例放大潜空间", + "display_name": "缩放Latent（比例）", "inputs": { "samples": { - "name": "样本" + "name": "Latent" }, "scale_by": { - "name": "按比例放大" + "name": "缩放比例" }, "upscale_method": { - "name": "放大方法" + "name": "缩放算法" } } }, @@ -2399,7 +2399,7 @@ } }, "Load3DAnimation": { - "display_name": "加载3D - 动画", + "display_name": "加载3D动画", "inputs": { "animation_speed": { "name": "动画速度" @@ -2478,23 +2478,23 @@ } }, "LoadLatent": { - "display_name": "加载潜空间", + "display_name": "加载Latent", "inputs": { "latent": { - "name": "潜空间" + "name": "Latent" } } }, "LoraLoader": { - "description": "LoRA用于修改扩散和CLIP模型，改变潜空间图像的去噪方式，例如应用风格。多个LoRA节点可以链接在一起。", + "description": "LoRA用于修改扩散和CLIP模型，改变Latent图像的降噪方式，例如应用风格。多个LoRA节点可以链接在一起。", "display_name": "加载LoRA", "inputs": { "clip": { - "name": "剪辑", + "name": "CLIPCLIP", "tooltip": "LoRA 将应用于的 CLIP 模型。" }, "lora_name": { - "name": "lora名称", + "name": "LoRA名称", "tooltip": "LoRA 的名称。" }, "model": { @@ -2502,7 +2502,7 @@ "tooltip": "LoRA 将应用于的扩散模型。" }, "strength_clip": { - "name": "剪辑强度", + "name": "CLIP强度", "tooltip": "修改 CLIP 模型的强度。此值可以为负。" }, "strength_model": { @@ -2520,11 +2520,11 @@ } }, "LoraLoaderModelOnly": { - "description": "LoRA用于修改扩散和CLIP模型，改变潜空间图像的去噪方式，例如应用风格。多个LoRA节点可以链接在一起。", - "display_name": "仅加载LoRA模型", + "description": "LoRA用于修改扩散和CLIP模型，改变Latent图像的降噪方式，例如应用风格。多个LoRA节点可以链接在一起。", + "display_name": "LoRA加载器（仅模型）", "inputs": { "lora_name": { - "name": "lora名称" + "name": "LoRA名称" }, "model": { "name": "模型" @@ -2540,7 +2540,7 @@ } }, "LoraSave": { - "display_name": "提取并保存LoRA", + "display_name": "保存LoRA", "inputs": { "bias_diff": { "name": "偏差差异" @@ -2553,20 +2553,20 @@ }, "model_diff": { "name": "模型差异", - "tooltip": "要转换为 LoRA 的 ModelSubtract 输出。" + "tooltip": "要转换为 LoRA 的模型差异输出。" }, "rank": { "name": "排名" }, "text_encoder_diff": { "name": "文本编码器差异", - "tooltip": "要转换为 LoRA 的 CLIPSubtract 输出。" + "tooltip": "要转换为 LoRA 的CLIP差异输出。" } } }, "Mahiro": { - "description": "修改引导以更多地侧重于正面提示的'方向'，而不是负面提示之间的差异。", - "display_name": "Mahiro太可爱了，她应该有一个更好的引导功能！！(。・ω・。)", + "description": "修改引导以更多地侧重于正面条件提示的'方向'，而不是负面条件提示之间的差异。", + "display_name": "真寻太可爱了，她应该有个更好的引导功能！！(。・ω・。)", "inputs": { "model": { "name": "模型" @@ -2579,7 +2579,7 @@ } }, "MaskComposite": { - "display_name": "遮罩合成", + "display_name": "合成遮罩", "inputs": { "destination": { "name": "目标" @@ -2599,7 +2599,7 @@ } }, "MaskToImage": { - "display_name": "将遮罩转换为图像", + "display_name": "遮罩转换为图像", "inputs": { "mask": { "name": "遮罩" @@ -2607,7 +2607,7 @@ } }, "ModelMergeAdd": { - "display_name": "模型合并添加", + "display_name": "模型相加", "inputs": { "model1": { "name": "模型1" @@ -2618,7 +2618,7 @@ } }, "ModelMergeAuraflow": { - "display_name": "模型合并Auraflow", + "display_name": "模型融合（Auraflow ）", "inputs": { "cond_seq_linear_": { "name": "条件序列线性." @@ -2758,7 +2758,7 @@ } }, "ModelMergeBlocks": { - "display_name": "模型合并块", + "display_name": "模型融合（分块）", "inputs": { "input": { "name": "输入" @@ -2778,7 +2778,7 @@ } }, "ModelMergeFlux1": { - "display_name": "模型合并Flux1", + "display_name": "模型融合（Flux1）", "inputs": { "double_blocks_0_": { "name": "双块.0." @@ -2978,7 +2978,7 @@ } }, "ModelMergeLTXV": { - "display_name": "模型合并LTXV", + "display_name": "模型融合（LTXV）", "inputs": { "adaln_single_": { "name": "adaln_single." @@ -3088,7 +3088,7 @@ } }, "ModelMergeMochiPreview": { - "display_name": "模型合并Mochi预览", + "display_name": "模型融合（Mochi预览）", "inputs": { "blocks_0_": { "name": "blocks.0." @@ -3258,7 +3258,7 @@ } }, "ModelMergeSD1": { - "display_name": "模型合并SD1", + "display_name": "模型融合（SD1）", "inputs": { "input_blocks_0_": { "name": "输入块.0." @@ -3359,7 +3359,7 @@ } }, "ModelMergeSD2": { - "display_name": "模型合并SD2", + "display_name": "模型融合（SD2）", "inputs": { "input_blocks_0_": { "name": "输入块.0." @@ -3460,7 +3460,7 @@ } }, "ModelMergeSD35_Large": { - "display_name": "模型合并SD35_大", + "display_name": "模型融合（SD35_大）", "inputs": { "context_embedder_": { "name": "上下文嵌入器." @@ -3603,7 +3603,7 @@ } }, "ModelMergeSD3_2B": { - "display_name": "模型合并SD3_2B", + "display_name": "模型融合（SD3_2B）", "inputs": { "context_embedder_": { "name": "上下文嵌入器." @@ -3704,7 +3704,7 @@ } }, "ModelMergeSDXL": { - "display_name": "模型合并SDXL", + "display_name": "模型融合（SDXL）", "inputs": { "input_blocks_0": { "name": "输入块.0" @@ -3787,7 +3787,7 @@ } }, "ModelMergeSimple": { - "display_name": "模型合并简单", + "display_name": "模型融合（简易）", "inputs": { "model1": { "name": "模型1" @@ -3801,7 +3801,7 @@ } }, "ModelMergeSubtract": { - "display_name": "模型合并减法", + "display_name": "模型相减", "inputs": { "model1": { "name": "模型1" @@ -3815,7 +3815,7 @@ } }, "ModelSamplingAuraFlow": { - "display_name": "模型采样AuraFlow", + "display_name": "采样算法（AuraFlow）", "inputs": { "model": { "name": "模型" @@ -3826,7 +3826,7 @@ } }, "ModelSamplingContinuousEDM": { - "display_name": "模型采样连续EDM", + "display_name": "采样算法（连续EDM）", "inputs": { "model": { "name": "模型" @@ -3843,7 +3843,7 @@ } }, "ModelSamplingContinuousV": { - "display_name": "模型采样连续V", + "display_name": "采样算法（连续V）", "inputs": { "model": { "name": "模型" @@ -3860,7 +3860,7 @@ } }, "ModelSamplingDiscrete": { - "display_name": "模型采样离散", + "display_name": "采样算法（离散）", "inputs": { "model": { "name": "模型" @@ -3874,16 +3874,16 @@ } }, "ModelSamplingFlux": { - "display_name": "模型采样Flux", + "display_name": "采样算法（Flux）", "inputs": { "base_shift": { - "name": "基础偏移" + "name": "基础移位" }, "height": { "name": "高度" }, "max_shift": { - "name": "最大偏移" + "name": "最大移位" }, "model": { "name": "模型" @@ -3894,16 +3894,16 @@ } }, "ModelSamplingLTXV": { - "display_name": "模型采样LTXV", + "display_name": "采样算法（LTXV）", "inputs": { "base_shift": { - "name": "基础偏移" + "name": "基础移位" }, "latent": { - "name": "潜空间" + "name": "Latent" }, "max_shift": { - "name": "最大偏移" + "name": "最大移位" }, "model": { "name": "模型" @@ -3911,24 +3911,24 @@ } }, "ModelSamplingSD3": { - "display_name": "模型采样SD3", + "display_name": "采样算法（SD3）", "inputs": { "model": { "name": "模型" }, "shift": { - "name": "偏移" + "name": "移位" } } }, "ModelSamplingStableCascade": { - "display_name": "模型采样稳定级联", + "display_name": "采样算法（Stable Cascade）", "inputs": { "model": { "name": "模型" }, "shift": { - "name": "偏移" + "name": "移位" } } }, @@ -3958,55 +3958,55 @@ } }, "PairConditioningCombine": { - "display_name": "条件对组合", + "display_name": "条件对合并", "inputs": { "negative_A": { - "name": "负向_A" + "name": "负面条件_A" }, "negative_B": { - "name": "负向_B" + "name": "负面条件_B" }, "positive_A": { - "name": "正向_A" + "name": "正面条件_A" }, "positive_B": { - "name": "正向_B" + "name": "正面条件_B" } }, "outputs": { "0": { - "name": "正面" + "name": "正面条件" }, "1": { - "name": "负面" + "name": "负面条件" } } }, "PairConditioningSetDefaultCombine": { - "display_name": "条件对设置默认组合", + "display_name": "条件对设置默认合并", "inputs": { "hooks": { - "name": "钩子" + "name": "约束" }, "negative": { - "name": "负向" + "name": "负面条件" }, "negative_DEFAULT": { - "name": "默认负向" + "name": "默认负面条件" }, "positive": { - "name": "正向" + "name": "正面条件" }, "positive_DEFAULT": { - "name": "默认正向" + "name": "默认正面条件" } }, "outputs": { "0": { - "name": "正面" + "name": "正面条件" }, "1": { - "name": "负面" + "name": "负面条件" } } }, @@ -4014,16 +4014,16 @@ "display_name": "条件对设置属性", "inputs": { "hooks": { - "name": "钩子" + "name": "约束" }, "mask": { "name": "遮罩" }, "negative_NEW": { - "name": "新负向" + "name": "新负面条件" }, "positive_NEW": { - "name": "新正向" + "name": "新正面条件" }, "set_cond_area": { "name": "设置条件区域" @@ -4032,38 +4032,38 @@ "name": "强度" }, "timesteps": { - "name": "时间步" + "name": "间隔" } }, "outputs": { "0": { - "name": "正面" + "name": "正面条件" }, "1": { - "name": "负面" + "name": "负面条件" } } }, "PairConditioningSetPropertiesAndCombine": { - "display_name": "条件对设置属性组合", + "display_name": "条件对设置属性合并", "inputs": { "hooks": { - "name": "钩子" + "name": "约束" }, "mask": { "name": "遮罩" }, "negative": { - "name": "负向" + "name": "负面条件" }, "negative_NEW": { - "name": "新负向" + "name": "新负面条件" }, "positive": { - "name": "正向" + "name": "正面条件" }, "positive_NEW": { - "name": "新正向" + "name": "新正面条件" }, "set_cond_area": { "name": "设置条件区域" @@ -4072,32 +4072,32 @@ "name": "强度" }, "timesteps": { - "name": "时间步" + "name": "间隔" } }, "outputs": { "0": { - "name": "正面" + "name": "正面条件" }, "1": { - "name": "负面" + "name": "负面条件" } } }, "PatchModelAddDownscale": { - "display_name": "补丁模型添加下采样（Kohya深度缩小）", + "display_name": "收缩模型UNET（Kohya Deep Shrink）", "inputs": { "block_number": { - "name": "块数" + "name": "层编号" }, "downscale_after_skip": { - "name": "跳过后缩小" + "name": "跳过后收缩" }, "downscale_factor": { - "name": "缩小因子" + "name": "收缩系数" }, "downscale_method": { - "name": "缩小方法" + "name": "收缩算法" }, "end_percent": { "name": "结束百分比" @@ -4123,7 +4123,7 @@ "name": "模型" }, "neg_scale": { - "name": "负比例" + "name": "负面缩放" } } }, @@ -4140,18 +4140,18 @@ "name": "模型" }, "neg_scale": { - "name": "负比例" + "name": "负面缩放" }, "negative": { - "name": "负面" + "name": "负面条件" }, "positive": { - "name": "正面" + "name": "正面条件" } } }, "PerturbedAttentionGuidance": { - "display_name": "扰动注意力引导", + "display_name": "PAG注意力引导", "inputs": { "model": { "name": "模型" @@ -4187,7 +4187,7 @@ } }, "PolyexponentialScheduler": { - "display_name": "多指数调度器", + "display_name": "Polyexponential调度器", "inputs": { "rho": { "name": "rho" @@ -4199,7 +4199,7 @@ "name": "sigma最小值" }, "steps": { - "name": "步骤" + "name": "步数" } } }, @@ -4207,24 +4207,24 @@ "display_name": "Porter-Duff图像合成", "inputs": { "destination": { - "name": "目的地" + "name": "目标图像" }, "destination_alpha": { - "name": "目的地alpha" + "name": "目标图像alpha" }, "mode": { "name": "模式" }, "source": { - "name": "源" + "name": "来源图像" }, "source_alpha": { - "name": "源alpha" + "name": "来源图像alpha" } } }, "Preview3D": { - "display_name": "3D预览", + "display_name": "预览3D", "inputs": { "bg_color": { "name": "背景颜色" @@ -4261,7 +4261,7 @@ } }, "PreviewImage": { - "description": "将输入图像保存到您的ComfyUI输出目录。", + "description": "将输入图像保存到您的ComfyUI临时目录。", "display_name": "预览图像", "inputs": { "images": { @@ -4270,15 +4270,15 @@ } }, "RandomNoise": { - "display_name": "随机噪声", + "display_name": "随机噪波", "inputs": { "noise_seed": { - "name": "噪声种子" + "name": "噪波随机种" } } }, "RebatchImages": { - "display_name": "重新批处理图像", + "display_name": "重设图像批次", "inputs": { "batch_size": { "name": "批量大小" @@ -4289,18 +4289,18 @@ } }, "RebatchLatents": { - "display_name": "重新批处理潜空间", + "display_name": "重设Latent批次", "inputs": { "batch_size": { "name": "批量大小" }, "latents": { - "name": "潜空间因素" + "name": "Latent因素" } } }, "RepeatImageBatch": { - "display_name": "重复图像批处理", + "display_name": "复制图像批次", "inputs": { "amount": { "name": "数量" @@ -4311,18 +4311,18 @@ } }, "RepeatLatentBatch": { - "display_name": "重复潜空间批处理", + "display_name": "复制Latent批次", "inputs": { "amount": { "name": "数量" }, "samples": { - "name": "样本" + "name": "Latent" } } }, "RescaleCFG": { - "display_name": "重新缩放CFG", + "display_name": "缩放CFG", "inputs": { "model": { "name": "模型" @@ -4336,13 +4336,13 @@ "display_name": "SDTurbo调度器", "inputs": { "denoise": { - "name": "去噪" + "name": "降噪" }, "model": { "name": "模型" }, "steps": { - "name": "步骤" + "name": "步数" } } }, @@ -4353,13 +4353,13 @@ "name": "图片" }, "negative": { - "name": "负面" + "name": "负面条件" }, "noise_augmentation": { - "name": "噪声增强" + "name": "噪波增强" }, "positive": { - "name": "正面" + "name": "正面条件" }, "scale_ratio": { "name": "缩放比例" @@ -4367,13 +4367,13 @@ }, "outputs": { "0": { - "name": "正面" + "name": "正面条件" }, "1": { - "name": "负面" + "name": "负面条件" }, "2": { - "name": "潜空间" + "name": "Latent" } } }, @@ -4384,7 +4384,7 @@ "name": "clip视觉" }, "elevation": { - "name": "海拔" + "name": "俯仰角" }, "height": { "name": "高度" @@ -4396,7 +4396,7 @@ "name": "vae" }, "video_frames": { - "name": "视频帧" + "name": "帧数" }, "width": { "name": "宽度" @@ -4404,13 +4404,13 @@ }, "outputs": { "0": { - "name": "正面" + "name": "正面条件" }, "1": { - "name": "负面" + "name": "负面条件" }, "2": { - "name": "潜空间" + "name": "Latent" } } }, @@ -4418,10 +4418,10 @@ "display_name": "SVD_img2vid条件", "inputs": { "augmentation_level": { - "name": "增强级别" + "name": "增强" }, "clip_vision": { - "name": "clip_vision" + "name": "clip视觉" }, "fps": { "name": "帧率" @@ -4433,13 +4433,13 @@ "name": "初始图像" }, "motion_bucket_id": { - "name": "运动桶ID" + "name": "动态bucketID" }, "vae": { "name": "vae" }, "video_frames": { - "name": "视频帧" + "name": "帧数" }, "width": { "name": "宽度" @@ -4447,13 +4447,13 @@ }, "outputs": { "0": { - "name": "正面" + "name": "正面条件" }, "1": { - "name": "负面" + "name": "负面条件" }, "2": { - "name": "潜空间" + "name": "Latent" } } }, @@ -4461,39 +4461,39 @@ "display_name": "自定义采样器", "inputs": { "add_noise": { - "name": "添加噪声" + "name": "添加噪波" }, "cfg": { "name": "cfg" }, "latent_image": { - "name": "潜空间图像" + "name": "Latent" }, "model": { "name": "模型" }, "negative": { - "name": "负面" + "name": "负面条件" }, "noise_seed": { - "name": "噪声种子" + "name": "噪波种子" }, "positive": { - "name": "正面" + "name": "正面条件" }, "sampler": { "name": "采样器" }, "sigmas": { - "name": "西格玛" + "name": "Sigmas" } }, "outputs": { "0": { - "name": "输出" + "name": "Latent" }, "1": { - "name": "去噪输出" + "name": "降噪Latent" } } }, @@ -4504,10 +4504,10 @@ "name": "引导器" }, "latent_image": { - "name": "潜空间图像" + "name": "Latent图像" }, "noise": { - "name": "噪声" + "name": "噪波" }, "sampler": { "name": "采样器" @@ -4518,45 +4518,45 @@ }, "outputs": { "0": { - "name": "输出" + "name": "Latent" }, "1": { - "name": "去噪输出" + "name": "降噪Latent" } } }, "SamplerDPMAdaptative": { - "display_name": "自适应DPM采样器", + "display_name": "DPMAdaptative采样器", "inputs": { "accept_safety": { - "name": "接受安全" + "name": "accept_safety" }, "atol": { - "name": "绝对公差" + "name": "atol" }, "dcoeff": { - "name": "d系数" + "name": "dcoeff" }, "eta": { "name": "eta" }, "h_init": { - "name": "h初始" + "name": "h_init" }, "icoeff": { - "name": "i系数" + "name": "icoeff" }, "order": { - "name": "顺序" + "name": "order" }, "pcoeff": { - "name": "p系数" + "name": "pcoeff" }, "rtol": { - "name": "相对公差" + "name": "rtol" }, "s_noise": { - "name": "s噪声" + "name": "s_noise" } } }, @@ -4567,10 +4567,10 @@ "name": "eta" }, "noise_device": { - "name": "噪声设备" + "name": "噪波设备" }, "s_noise": { - "name": "s噪声" + "name": "s_noise" }, "solver_type": { "name": "求解器类型" @@ -4578,13 +4578,13 @@ } }, "SamplerDPMPP_2S_Ancestral": { - "display_name": "DPMPP_2S_祖先采样器", + "display_name": "DPMPP_2S_Ancestral采样器", "inputs": { "eta": { "name": "eta" }, "s_noise": { - "name": "s噪声" + "name": "s_noise" } } }, @@ -4595,10 +4595,10 @@ "name": "eta" }, "noise_device": { - "name": "噪声设备" + "name": "噪波设备" }, "s_noise": { - "name": "s噪声" + "name": "s_noise" } } }, @@ -4609,40 +4609,40 @@ "name": "eta" }, "noise_device": { - "name": "噪声设备" + "name": "噪波设备" }, "r": { "name": "r" }, "s_noise": { - "name": "s噪声" + "name": "s_noise" } } }, "SamplerEulerAncestral": { - "display_name": "欧拉祖先采样器", + "display_name": "EulerAncestral采样器", "inputs": { "eta": { "name": "eta" }, "s_noise": { - "name": "s噪声" + "name": "s噪波" } } }, "SamplerEulerAncestralCFGPP": { - "display_name": "欧拉祖先CFG++采样器", + "display_name": "EulerAncestralCFG++采样器", "inputs": { "eta": { "name": "eta" }, "s_noise": { - "name": "s噪声" + "name": "s噪波" } } }, "SamplerEulerCFGpp": { - "display_name": "欧拉CFG++采样器", + "display_name": "EuleCFG++采样器", "inputs": { "version": { "name": "版本" @@ -4650,16 +4650,16 @@ } }, "SamplerLCMUpscale": { - "display_name": "LCM放大采样器", + "display_name": "LCM缩放采样器", "inputs": { "scale_ratio": { "name": "缩放比例" }, "scale_steps": { - "name": "缩放步骤" + "name": "缩放步数" }, "upscale_method": { - "name": "放大方法" + "name": "缩放方法" } } }, @@ -4672,7 +4672,7 @@ } }, "SaveAnimatedPNG": { - "display_name": "保存动画PNG", + "display_name": "保存动画（APNG）", "inputs": { "compress_level": { "name": "压缩级别" @@ -4689,7 +4689,7 @@ } }, "SaveAnimatedWEBP": { - "display_name": "保存动画WEBP", + "display_name": "保存动画（WEBP）", "inputs": { "filename_prefix": { "name": "文件名前缀" @@ -4728,7 +4728,7 @@ "inputs": { "filename_prefix": { "name": "文件名前缀", - "tooltip": "要保存的文件的前缀。这可能包括格式信息，例如 %date:yyyy-MM-dd% 或 %Empty Latent Image.width% 以包含节点中的值。" + "tooltip": "保存文件的文件名的前缀。可使用格式信息如 %date:yyyy-MM-dd% 或 %空Latent.width%，以包含来自工作流内的信息。" }, "images": { "name": "图片", @@ -4737,7 +4737,7 @@ } }, "SaveImageWebsocket": { - "display_name": "保存图像Websocket", + "display_name": "保存图像（网络接口）", "inputs": { "images": { "name": "图片" @@ -4745,21 +4745,21 @@ } }, "SaveLatent": { - "display_name": "保存潜空间", + "display_name": "保存Latent", "inputs": { "filename_prefix": { "name": "文件名前缀" }, "samples": { - "name": "样本" + "name": "Latent" } } }, "SelfAttentionGuidance": { - "display_name": "自注意力引导", + "display_name": "SAG自注意力引导", "inputs": { "blur_sigma": { - "name": "模糊西格玛" + "name": "模糊Sigma" }, "model": { "name": "模型" @@ -4770,7 +4770,7 @@ } }, "SetClipHooks": { - "display_name": "设置CLIP钩子", + "display_name": "设置CLIP约束", "inputs": { "apply_to_conds": { "name": "应用于条件" @@ -4779,7 +4779,7 @@ "name": "clip" }, "hooks": { - "name": "钩子" + "name": "约束" }, "schedule_clip": { "name": "安排clip" @@ -4787,32 +4787,32 @@ } }, "SetHookKeyframes": { - "display_name": "设置钩子关键帧", + "display_name": "设置约束关键帧", "inputs": { "hook_kf": { - "name": "钩子关键帧" + "name": "约束关键帧" }, "hooks": { - "name": "钩子" + "name": "约束" } } }, "SetLatentNoiseMask": { - "display_name": "设置潜空间噪声遮罩", + "display_name": "设置Latent噪波遮罩", "inputs": { "mask": { "name": "遮罩" }, "samples": { - "name": "样本" + "name": "Latent" } } }, "SetUnionControlNetType": { - "display_name": "设置联合控制网类型", + "display_name": "设置UnionControlNet类型", "inputs": { "control_net": { - "name": "控制网络" + "name": "ControlNet" }, "type": { "name": "类型" @@ -4820,8 +4820,8 @@ } }, "SkipLayerGuidanceDiT": { - "description": "通用版本的跳过层引导节点，可用于每个DiT模型。", - "display_name": "跳过层引导DiT", + "description": "通用的跳过层引导节点，可用于每个DiT模型。", + "display_name": "跳过层引导（DiT）", "inputs": { "double_layers": { "name": "双层" @@ -4848,7 +4848,7 @@ }, "SkipLayerGuidanceSD3": { "description": "通用版本的跳过层引导节点，可用于每个DiT模型。", - "display_name": "跳过层引导SD3", + "display_name": "跳过层引导（SD3）", "inputs": { "end_percent": { "name": "结束百分比" @@ -4868,13 +4868,13 @@ } }, "SolidMask": { - "display_name": "实心遮罩", + "display_name": "纯块遮罩", "inputs": { "height": { "name": "高度" }, "value": { - "name": "值" + "name": "明度" }, "width": { "name": "宽度" @@ -4882,7 +4882,7 @@ } }, "SplitImageWithAlpha": { - "display_name": "按Alpha分割图像", + "display_name": "分离图像Alpha", "inputs": { "image": { "name": "图片" @@ -4890,13 +4890,13 @@ } }, "SplitSigmas": { - "display_name": "分割Sigma", + "display_name": "分离Sigma", "inputs": { "sigmas": { - "name": "西格玛" + "name": "Sigmas" }, "step": { - "name": "步骤" + "name": "步数" } }, "outputs": { @@ -4909,13 +4909,13 @@ } }, "SplitSigmasDenoise": { - "display_name": "分割Sigma去噪", + "display_name": "分离Sigma降噪", "inputs": { "denoise": { "name": "降噪" }, "sigmas": { - "name": "西格玛" + "name": "Sigmas" } }, "outputs": { @@ -4928,7 +4928,7 @@ } }, "StableCascade_EmptyLatentImage": { - "display_name": "稳定级联_空潜空间图像", + "display_name": "空Latent图像（Stable Cascade）", "inputs": { "batch_size": { "name": "批量大小" @@ -4953,7 +4953,7 @@ } }, "StableCascade_StageB_Conditioning": { - "display_name": "稳定级联_B阶段条件", + "display_name": "Stable Cascade_B阶段_条件", "inputs": { "conditioning": { "name": "条件" @@ -4964,7 +4964,7 @@ } }, "StableCascade_StageC_VAEEncode": { - "display_name": "稳定级联_C阶段VAE编码", + "display_name": "Stable Cascade_C阶段_VAE编码", "inputs": { "compression": { "name": "压缩" @@ -4986,7 +4986,7 @@ } }, "StableCascade_SuperResolutionControlnet": { - "display_name": "稳定级联_超分辨率控制网", + "display_name": "Stable Cascade_超分辨率ControlNet", "inputs": { "image": { "name": "图像" @@ -4997,7 +4997,7 @@ }, "outputs": { "0": { - "name": "控制网输入" + "name": "ControlNet" }, "1": { "name": "阶段C" @@ -5008,7 +5008,7 @@ } }, "StableZero123_Conditioning": { - "display_name": "稳定零123条件", + "display_name": "StableZero123条件", "inputs": { "azimuth": { "name": "方位角" @@ -5020,7 +5020,7 @@ "name": "clip视觉" }, "elevation": { - "name": "海拔" + "name": "俯仰角" }, "height": { "name": "高度" @@ -5037,24 +5037,24 @@ }, "outputs": { "0": { - "name": "正面" + "name": "正面条件" }, "1": { - "name": "负面" + "name": "负面条件" }, "2": { - "name": "潜空间" + "name": "Latent" } } }, "StableZero123_Conditioning_Batched": { - "display_name": "稳定零123条件_批处理", + "display_name": "StableZero123条件_批处理", "inputs": { "azimuth": { "name": "方位角" }, "azimuth_batch_increment": { - "name": "方位角批量增量" + "name": "方位角增量" }, "batch_size": { "name": "批量大小" @@ -5063,10 +5063,10 @@ "name": "clip视觉" }, "elevation": { - "name": "海拔" + "name": "俯仰角" }, "elevation_batch_increment": { - "name": "海拔批量增量" + "name": "俯仰角增量" }, "height": { "name": "高度" @@ -5083,13 +5083,13 @@ }, "outputs": { "0": { - "name": "正面" + "name": "正面条件" }, "1": { - "name": "负面" + "name": "负面条件" }, "2": { - "name": "潜空间" + "name": "Latent" } } }, @@ -5122,7 +5122,7 @@ } }, "ThresholdMask": { - "display_name": "阈值遮罩", + "display_name": "遮罩阈值", "inputs": { "mask": { "name": "遮罩" @@ -5133,7 +5133,7 @@ } }, "TomePatchModel": { - "display_name": "Tome补丁模型", + "display_name": "Tome合并模型Token", "inputs": { "model": { "name": "模型" @@ -5155,33 +5155,33 @@ } }, "TripleCLIPLoader": { - "description": "[配方]\n\nsd3：clip-l，clip-g，t5", + "description": "[配方]\n\nSD3：clip-l，clip-g，t5", "display_name": "三重CLIP加载器", "inputs": { "clip_name1": { - "name": "clip_name1" + "name": "CLIP名称1" }, "clip_name2": { - "name": "clip_name2" + "name": "CLIP名称2" }, "clip_name3": { - "name": "clip_name3" + "name": "CLIP名称3" } } }, "UNETLoader": { - "display_name": "加载扩散模型", + "display_name": "UNet加载器", "inputs": { "unet_name": { - "name": "unet_name" + "name": "UNet名称" }, "weight_dtype": { - "name": "权重数据类型" + "name": "数据类型" } } }, "UNetCrossAttentionMultiply": { - "display_name": "UNet交叉注意力乘法", + "display_name": "UNet交叉注意力乘数", "inputs": { "k": { "name": "k" @@ -5201,7 +5201,7 @@ } }, "UNetSelfAttentionMultiply": { - "display_name": "UNet自注意力乘法", + "display_name": "UNet自注意力乘数", "inputs": { "k": { "name": "k" @@ -5221,7 +5221,7 @@ } }, "UNetTemporalAttentionMultiply": { - "display_name": "UNet时间注意力乘法", + "display_name": "UNet时间注意力乘数", "inputs": { "cross_structural": { "name": "交叉结构" @@ -5249,16 +5249,16 @@ } }, "VAEDecode": { - "description": "将潜空间图像解码回像素空间图像。", + "description": "将 Latent 图像解码为像素空间的图像。", "display_name": "VAE解码", "inputs": { "samples": { - "name": "样本", - "tooltip": "要解码的潜空间图像。" + "name": "Latent", + "tooltip": "要解码的 Latent 图像。" }, "vae": { "name": "vae", - "tooltip": "用于解码潜空间图像的 VAE 模型。" + "tooltip": "用于解码 Latent 图像的 VAE 模型。" } }, "outputs": { @@ -5268,10 +5268,10 @@ } }, "VAEDecodeAudio": { - "display_name": "VAE解码音频", + "display_name": "VAE解码（音频）", "inputs": { "samples": { - "name": "样本" + "name": "Latent" }, "vae": { "name": "vae" @@ -5279,24 +5279,24 @@ } }, "VAEDecodeTiled": { - "display_name": "VAE解码（平铺）", + "display_name": "VAE解码（分块）", "inputs": { "overlap": { "name": "重叠" }, "samples": { - "name": "样本" + "name": "Latent" }, "temporal_overlap": { "name": "时间重叠", - "tooltip": "仅用于视频VAEs：重叠的帧数。" + "tooltip": "仅用于视频VAE：重叠的帧数。" }, "temporal_size": { "name": "时间尺寸", - "tooltip": "仅用于视频VAEs：一次解码的帧数。" + "tooltip": "仅用于视频VAE：一次解码的帧数。" }, "tile_size": { - "name": "瓷砖大小" + "name": "分块尺寸" }, "vae": { "name": "vae" @@ -5315,7 +5315,7 @@ } }, "VAEEncodeAudio": { - "display_name": "VAE编码音频", + "display_name": "VAE编码（音频）", "inputs": { "audio": { "name": "音频" @@ -5326,10 +5326,10 @@ } }, "VAEEncodeForInpaint": { - "display_name": "VAE编码（用于修复）", + "display_name": "VAE编码（局部重绘）", "inputs": { "grow_mask_by": { - "name": "增长遮罩" + "name": "扩展遮罩" }, "mask": { "name": "遮罩" @@ -5343,7 +5343,7 @@ } }, "VAEEncodeTiled": { - "display_name": "VAE编码（平铺）", + "display_name": "VAE编码分块）", "inputs": { "overlap": { "name": "重叠" @@ -5353,14 +5353,14 @@ }, "temporal_overlap": { "name": "时间重叠", - "tooltip": "仅用于视频VAEs：重叠的帧数。" + "tooltip": "仅用于视频VAE：重叠的帧数。" }, "temporal_size": { "name": "时间尺寸", - "tooltip": "仅用于视频VAEs：一次编码的帧数。" + "tooltip": "仅用于视频VAE：一次编码的帧数。" }, "tile_size": { - "name": "瓷砖大小" + "name": "分块尺寸" }, "vae": { "name": "vae" @@ -5399,7 +5399,7 @@ "name": "eps_s" }, "steps": { - "name": "步骤" + "name": "步数" } } }, @@ -5429,7 +5429,7 @@ "display_name": "网络摄像头捕获", "inputs": { "capture_on_queue": { - "name": "队列捕获" + "name": "执行时捕获" }, "height": { "name": "高度" @@ -5443,10 +5443,10 @@ } }, "unCLIPCheckpointLoader": { - "display_name": "unCLIP检查点加载器", + "display_name": "unCLIPCheckpoint加载器", "inputs": { "ckpt_name": { - "name": "ckpt_name" + "name": "Checkpoint名称" } } }, @@ -5454,13 +5454,13 @@ "display_name": "unCLIP条件", "inputs": { "clip_vision_output": { - "name": "clip_vision_output" + "name": "CLIP视觉输出" }, "conditioning": { "name": "条件" }, "noise_augmentation": { - "name": "噪声增强" + "name": "噪波增强" }, "strength": { "name": "强度" diff --git a/src/locales/zh/settings.json b/src/locales/zh/settings.json index 5fc8aa506..0b31b5423 100644 --- a/src/locales/zh/settings.json +++ b/src/locales/zh/settings.json @@ -15,11 +15,11 @@ "name": "启用开发模式选项（API保存等）" }, "Comfy_DisableFloatRounding": { - "name": "禁用默认浮动小部件四舍五入。", - "tooltip": "(需要重新加载页面) 当后端节点设置了四舍五入时，无法禁用四舍五入。" + "name": "禁用默认浮点组件四舍五入。", + "tooltip": "(需要重新加载页面) 当节点自身设置了四舍五入时，无法禁用该功能。" }, "Comfy_DisableSliders": { - "name": "禁用节点小部件滑块" + "name": "禁用节点组件滑块" }, "Comfy_EditAttention_Delta": { "name": "Ctrl+上/下 精度" @@ -28,10 +28,10 @@ "name": "启用工具提示" }, "Comfy_EnableWorkflowViewRestore": { - "name": "在工作流中保存和恢复画布位置及缩放级别" + "name": "在工作流中保存和恢复视图位置及缩放" }, "Comfy_FloatRoundingPrecision": { - "name": "浮动小部件四舍五入的小数位数 [0 = 自动]。", + "name": "浮点组件四舍五入的小数位数 [0 = 自动]。", "tooltip": "(需要重新加载页面)" }, "Comfy_Graph_CanvasInfo": { @@ -44,7 +44,7 @@ "name": "启用快速缩放快捷键（Ctrl + Shift + 拖动）" }, "Comfy_Graph_LinkMarkers": { - "name": "链接中点标记", + "name": "连线中点标记", "options": { "Arrow": "箭头", "Circle": "圆", @@ -64,7 +64,7 @@ "name": "反转上下文菜单滚动" }, "Comfy_LinkRelease_Action": { - "name": "释放链接时的操作（无修饰符）", + "name": "释放连线时的操作", "options": { "context menu": "上下文菜单", "no action": "无操作", @@ -72,7 +72,7 @@ } }, "Comfy_LinkRelease_ActionShift": { - "name": "释放链接时的操作（Shift）", + "name": "释放连线时的操作（Shift）", "options": { "context menu": "上下文菜单", "no action": "无操作", @@ -80,12 +80,12 @@ } }, "Comfy_LinkRenderMode": { - "name": "链接渲染模式", + "name": "连线渲染样式", "options": { "Hidden": "隐藏", - "Linear": "线性", - "Spline": "样条", - "Straight": "直线" + "Linear": "直线", + "Spline": "曲线", + "Straight": "直角线" } }, "Comfy_Locale": { @@ -108,7 +108,7 @@ }, "Comfy_ModelLibrary_AutoLoadAll": { "name": "自动加载所有模型文件夹", - "tooltip": "如果为真，所有文件夹将在打开模型库时立即加载（这可能会导致加载时的延迟）。如果为假，根级模型文件夹仅在您单击它们时加载。" + "tooltip": "开启后，打开模型库会加载所有文件夹内的模型（可能导致卡顿）。关闭后，仅加载当前文件夹内的模型。" }, "Comfy_ModelLibrary_NameFormat": { "name": "在模型库树视图中显示的名称", @@ -116,119 +116,119 @@ "filename": "文件名", "title": "标题" }, - "tooltip": "选择“文件名”以在模型列表中呈现原始文件名的简化视图（不带目录或“.safetensors”扩展名）。选择“标题”以显示可配置的模型元数据标题。" + "tooltip": "选择“文件名”以在模型列表中显示原始文件名的简化视图（不带目录和“.safetensors”后缀名）。选择“标题”以显示可配置的模型元数据标题。" }, "Comfy_NodeBadge_NodeIdBadgeMode": { - "name": "节点ID徽章模式", + "name": "节点ID标签", "options": { "None": "无", "Show all": "显示全部" } }, "Comfy_NodeBadge_NodeLifeCycleBadgeMode": { - "name": "节点生命周期徽章模式", + "name": "节点制作周期标签", "options": { "None": "无", "Show all": "显示全部" } }, "Comfy_NodeBadge_NodeSourceBadgeMode": { - "name": "节点源徽章模式", + "name": "节点源标签", "options": { - "Hide built-in": "隐藏内置", + "Hide built-in": "仅第三方", "None": "无", "Show all": "显示全部" } }, "Comfy_NodeInputConversionSubmenus": { - "name": "在节点上下文菜单中，将输入/小部件之间转换的条目放置在子菜单中。" + "name": "在节点上下文菜单中，将输入/组件之间转换的条目放置在子菜单中。" }, "Comfy_NodeSearchBoxImpl": { - "name": "节点搜索框实现", + "name": "节点搜索框", "options": { "default": "默认", - "litegraph (legacy)": "litegraph（遗留）" + "litegraph (legacy)": "litegraph（旧版）" } }, "Comfy_NodeSearchBoxImpl_NodePreview": { - "name": "节点预览", - "tooltip": "仅适用于默认实现" + "name": "显示节点预览", + "tooltip": "仅适用于默认框架" }, "Comfy_NodeSearchBoxImpl_ShowCategory": { - "name": "在搜索结果中显示节点类别", - "tooltip": "仅适用于默认实现" + "name": "显示节点类别", + "tooltip": "仅适用于默认框架" }, "Comfy_NodeSearchBoxImpl_ShowIdName": { - "name": "在搜索结果中显示节点ID名称", - "tooltip": "仅适用于默认实现" + "name": "显示节点ID名称", + "tooltip": "仅适用于默认框架" }, "Comfy_NodeSearchBoxImpl_ShowNodeFrequency": { - "name": "在搜索结果中显示节点频率", - "tooltip": "仅适用于默认实现" + "name": "显示节点频率", + "tooltip": "仅适用于默认框架" }, "Comfy_NodeSuggestions_number": { "name": "节点建议数量", - "tooltip": "仅适用于 litegraph 搜索框/上下文菜单" + "tooltip": "仅适用于 litegraph" }, "Comfy_Node_AutoSnapLinkToSlot": { - "name": "自动将链接吸附到节点插槽", - "tooltip": "在节点上拖动链接时，链接会自动吸附到节点的可用输入插槽。" + "name": "连线自动吸附到节点接口", + "tooltip": "在节点上拖动连线时，连线会自动吸附到节点的可用输入接口。" }, "Comfy_Node_BypassAllLinksOnDelete": { - "name": "删除节点时保留所有链接", - "tooltip": "删除节点时，尝试重新连接其所有输入和输出链接（绕过已删除的节点）。" + "name": "删除节点时保留连线", + "tooltip": "删除节点时，尝试重新连接其所有输入和输出连线（类似于忽略节点）。" }, "Comfy_Node_DoubleClickTitleToEdit": { "name": "双击节点标题以编辑" }, "Comfy_Node_MiddleClickRerouteNode": { - "name": "中键单击创建新的重定向节点" + "name": "中键单击创建新的转接点" }, "Comfy_Node_Opacity": { "name": "节点不透明度" }, "Comfy_Node_ShowDeprecated": { "name": "在搜索中显示已弃用的节点", - "tooltip": "已弃用的节点在UI中默认隐藏，但在使用它们的现有工作流中仍然有效。" + "tooltip": "弃用节点在UI中默认隐藏，但在工作流中仍然有效。" }, "Comfy_Node_ShowExperimental": { "name": "在搜索中显示实验性节点", - "tooltip": "实验性节点在UI中标记为实验性，可能在未来版本中发生重大变化或被移除。在生产工作流中谨慎使用。" + "tooltip": "实验节点在UI中标记为实验性，可能在未来版本中发生重大变化或被移除。在生产工作流中谨慎使用。" }, "Comfy_Node_SnapHighlightsNode": { "name": "吸附高亮节点", - "tooltip": "在拖动链接经过具有可用输入插槽的节点时，高亮显示该节点。" + "tooltip": "在拖动连线经过具有可用输入接口的节点时，高亮显示该节点。" }, "Comfy_Pointer_ClickBufferTime": { "name": "指针点击漂移延迟", - "tooltip": "按下指针按钮后，这是指针移动可以被忽略的最大时间（以毫秒为单位）。\n\n有助于防止在点击时意外推动对象。" + "tooltip": "按下指针按钮后，忽略指针移动的最大时间（毫秒）。\n\n有助于防止在点击时意外移动鼠标。" }, "Comfy_Pointer_ClickDrift": { - "name": "指针点击漂移（最大距离）", - "tooltip": "如果指针在按住按钮时移动超过此距离，则视为拖动（而不是点击）。\n\n有助于防止在点击时意外推动对象。" + "name": "指针点击漂移（距离）", + "tooltip": "如果指针在按住按钮时移动超过此距离，则视为拖动（而不是点击）。\n\n有助于防止在点击时意外移动鼠标" }, "Comfy_Pointer_DoubleClickTime": { "name": "双击间隔（最大）", - "tooltip": "双击的两次点击之间的最大时间（以毫秒为单位）。增加此值可能有助于解决双击有时未被注册的问题。" + "tooltip": "双击的两次点击之间的最大时间（毫秒）。增加此值有助于解决双击有时未被识别的问题。" }, "Comfy_PreviewFormat": { "name": "预览图像格式", - "tooltip": "在图像小部件中显示预览时，将其转换为轻量级图像，例如webp、jpeg、webp;50等。" + "tooltip": "在图像组件中显示预览时，将其转换为轻量级图像，例如webp、jpeg、webp;50等。" }, "Comfy_PromptFilename": { "name": "保存工作流时提示文件名" }, "Comfy_QueueButton_BatchCountLimit": { "name": "批处理计数限制", - "tooltip": "一次点击按钮添加到队列的最大任务数量" + "tooltip": "单次添加到队列的最大任务数量" }, "Comfy_Queue_MaxHistoryItems": { "name": "队列历史大小", "tooltip": "队列历史中显示的最大任务数量。" }, "Comfy_RerouteBeta": { - "name": "选择加入重定向测试版", - "tooltip": "启用新的本地重定向。\n\n可以通过按住alt并从链接线拖动来添加重定向，或在链接菜单中添加。\n\n禁用此选项不会造成破坏 - 重定向将被隐藏。" + "name": "选择加入转接点Beta", + "tooltip": "启用新的转接点。\n\n通过按住alt并划过连线来添加转接点，或在连线中点菜单中添加。\n\n禁用此选项不会造成破坏 - 转接点将被隐藏。" }, "Comfy_Sidebar_Location": { "name": "侧边栏位置", @@ -245,14 +245,14 @@ } }, "Comfy_SnapToGrid_GridSize": { - "name": "吸附到网格大小", - "tooltip": "在按住shift拖动和调整节点大小时，它们将对齐到网格，这控制着网格的大小。" + "name": "吸附网格大小", + "tooltip": "在按住shift拖动和调整节点大小时，节点将对齐到网格，该选项控制网格。" }, "Comfy_TextareaWidget_FontSize": { - "name": "文本区域小部件字体大小" + "name": "文本框组件字体大小" }, "Comfy_TextareaWidget_Spellcheck": { - "name": "文本区域小部件拼写检查" + "name": "文本框组件拼写检查" }, "Comfy_TreeExplorer_ItemPadding": { "name": "树形浏览器项目内边距" @@ -266,19 +266,19 @@ } }, "Comfy_Validation_NodeDefs": { - "name": "验证节点定义（慢）", - "tooltip": "推荐给节点开发者。这将在启动时验证所有节点定义。" + "name": "校验节点定义（慢）", + "tooltip": "推荐给节点开发者。开启后会在 ComfyUI 启动时校验全部节点定义。" }, "Comfy_Validation_Workflows": { - "name": "验证工作流" + "name": "校验工作流" }, "Comfy_WidgetControlMode": { - "name": "小部件控制模式", + "name": "组件控制模式", "options": { "after": "之后", "before": "之前" }, - "tooltip": "控制小部件值的更新时机（随机/增量/减量），可以在提示排队之前或之后。" + "tooltip": "控制组件值的更新时机（随机/增加/减少），可以在执行工作流之前或之后。" }, "Comfy_Window_UnloadConfirmation": { "name": "关闭窗口时显示确认" @@ -293,7 +293,7 @@ "name": "显示缺失节点警告" }, "Comfy_Workflow_SortNodeIdOnSave": { - "name": "保存工作流时排序节点ID" + "name": "保存节点ID到工作流" }, "Comfy_Workflow_WorkflowTabsPosition": { "name": "已打开工作流的位置",