* enable batched_gemm_softmax_gemm_perm_wmma for gfx12
* disable instances with blocksize=256 in attention examples
* debuggging
* debug
* fixed lds_enabled
* debugging
* Fix and add limit to skiplds feature
* Enable skipLds feature and fix compilation bugs
* add ck_tile definitions for gfx12
* fix clang format and test/wmma_op
* updage instances cmake for gfx12
* disable the test_wmma_op on gfx12
* fix the builds for gfx950
* add gfx12 and gfx950 to default target list
* clean-up cmake file
* Initial introduction of OFP8 data types.
* Renamed FP8 and BF8 tests into FP8_FNUZ and BF8_FNUZ.
* Implementation of ConvertFP32Nearest in test_fp8_ocp.
* Remove dependence on possibly undeclared alias.
* Implement FP8OCP test for stochastic rounding mode.
* Implement FP8OCP tests for half_t type conversions.
* enable bf16 atomic add on gfx950
* Implement ConvertFP32Nearest test.
* Implement ConvertFP32Stochastic test.
* Implement ConvertFP16Nearest and ConvertFP16Stochastic tests.
* Refactoring. Move FP8 definitions into a separate header file.
* Enable easy switching between architectures.
* Fix compilation error for gfx942 architecture.
* Add fp4 type with constants
* only builf gfx950 branch for gfx950 target by default
* Enable OCP build of example_gemm_xdl_fp8.
* Fix formatting.
* fix the build logic for gfx950
* Improve GEMM example verbosity.
* Add constexpr where applicable.
* fix the logic of enabling XDL and WMMA instances
* Improve GEMM example verbosity.
* Enable build of example_gemm_xdl_fp8_bf8 test.
* Fix tests for gfx1101 architecture.
* Build DPP examples only on gfx103 and gfx11 architectures.
* Optionaly run either CPU or GPU verifications with GEMM examples.
* Extend GeneratorTensor_Sequential to produce values of prescribed data types.
* Add missing constructor.
* Add scale type and mxfp conversions
* Update conversions
* Add conversion tests
* Fix typo
* Improve infrastructure for OFP8 data type support.
* BUGFIX. Should not use FP8 as Compute/Accum data type.
* Add custom target for grouped_convnd_bwd_weight tests.
* Can build `tests` target on gfx950.
* Bugfixes on gfx1101 architecture.
* Fix dependencies.
* Add stochastic rounding tests
* Provide single point of truth for FP8 INF and NAN checks
* Prevent instantiation of operators that are not supported by FP8 data types
* Add FP8 type selection into client_axample CMakeLists.txt
* Prevent sccache server from shutting down during build
* Fix test success reporting logic
* Change default verification method to CPU.
GPU verification takes too much time to complete on the emulator.
* Add scale <-> float conversions
* Add scaled conversions with tests
* Add device conversions
* Make sure all tests and examples are built for gfx950
* Facilitate testing of FP8 data types on the emulator
* Introduce two new tensor generators
* Enable instances built for gfx94 to be built on gfx950
* Verify 35_splitk_gemm on floating point numbers.
splitk gemm appears to be losing precision VS reference implementation when FP numbers are involved.
* Format
* Verify 04_gemm_add_add_fastgelu on floating point numbers
* Verify 20_grouped_conv_bwd_weight on floating point numbers
* Verify 38_grouped_conv_bwd_data_multiple_d on floating point numbers
* Verify more tests on floating point data
* Fix data types and improve testing verbocity.
* Add fp4 vectors
* Add debug tests
* Upgrade to NPI 573 build docker.
* Skip on gemm_universal tests.
The tests take too long to complete on the emulator.
Need to see if it is possible to reduce the scope of the testing to just FP8 data types.
* Add new mfma instructions and examples
* Add preprocessor directives for gfx950 specific code
* Fix gfx1101 build
* Document test availability
* Re-enable fp8 gemms for gfx94/95
* Cherry-pick GEMM Universal tests for FP8 data types
* Cleanup
* Add vector types and tests
* Add check_err function
* Add tensor generators
* CK_USE_GFX94 has already been set on this branch
* Fix
* Address formatting issues and leftovers
* Make fail/pass logic consistent within 01_gemm folder
Removed multiple negations in fail/pass logic to propagate `true` as the success indicator.
* Fix GPU verification reporting logic.
* Update year in copyright notice.
* Cleanup
* Use `enum class` instead of `enum`
* Remove set_property for FP8 tests
* Add vector conversions
* Fix
* Fix linker errror
* Clean up
* Fix gfx950 conversions
* Clean up
* Fix more gfx950 conversions
* Fix even more gfx950 conversions
* Narrowing the scope of PR to OCP FP8 enablement only
* Add tests for OCP FP8 vector_type storage
* Fix client examples build
* Fix typo
* Update e8m0 casting
* Rename E8M0 type
* Update unpack method
* Cleanup merge artifacts
* Enable gemm kernel on all gfx9 architectures (#227)
* clean-up
* Implement `non_native_vector_base` with `ext_vector_type` array. (#232)
* Enable support of 1, 2, 4, and 8-byte custom types in CK.
* Fix pool tests for OCP FP8 data type
* Fix build
* Add ckProfiler gemm instances for new mfma instructions and fix ckProfiler build on gfx950
* fix clang format
* Add new mfma instructions and examples
* Add preprocessor directives for gfx950 specific code
* Add ckProfiler gemm instances for new mfma instructions and fix ckProfiler build on gfx950
* fix clang format
* Fix clang format for the newly merged files
* Use the existing example instances for fp16 bf16 and int8
* Remove comment on new mfma instructions in MfmaInstr
* Update include/ck/tensor_operation/gpu/grid/gridwise_batched_gemm_gemm_xdl_cshuffle_v1.hpp
Co-authored-by: Andriy Roshchenko <107577548+andriy-ca@users.noreply.github.com>
* merge from public repo
* Fix ck build
* Fix ck build
* Use double for max_abs_in_val
* Move scaled_type_convert functions to a separate header (#251)
* re-enable building mha lib and gemm_universal_f8 instances for gfx950
* Update library/src/tensor_operation_instance/gpu/CMakeLists.txt
Co-authored-by: Andriy Roshchenko <107577548+andriy-ca@users.noreply.github.com>
* fix typo for CK_USE_OCP_FP8
* fix typo for CK_USE_OCP_FP8
* Add FP6 and BF6 types (#261)
* Add a rounding flag
* Add FP6 and BF6
* Add tests
Co-authored-by: Andriy Roshchenko <107577548+andriy-ca@users.noreply.github.com>
* Clean up
---------
Co-authored-by: Andriy Roshchenko <107577548+andriy-ca@users.noreply.github.com>
* fix one more typo
* Refactor E8M0 scale implementation (#262)
* Refactor E8M0 scale implementation
* Add MXFP6 and MXBF6 conversion methods (#270)
* Add conversions
* Add tests
* Add docstrings
* Add scaled conversions
* Add fp6/bf6 tests
* Remove misleading fp4 test case
* Add docstrings
* Clean up
* Address comments
* Set stricter tolerances for RNE tests
* Add missing tests
* Add native conversions to float
* Revert "Add native conversions to float"
This reverts commit 09467111f73b753c8cc3d597533b187940353dab.
* Update copyright years
* replace the fp6 with bf6 convert calls in test_bf6
* fix test_bf6
* enable smfmac test
* [MX FP8] Add Scaled Type Convert Functions for OCP FP8/BF8 data types (#271)
* Move scaled_type_convert functions to a separate header
* Introduce MX data tests
* Build MX tests only on relevant architectures
* Refactor E8M0 scale implementation
* Fix `config.h` typo
* Cleanup deprecated symbols
* Refactor `amd_ck_fp8.hpp`
* `scaled_type_convert` for `f8_ocp_t`
* Implement test for MX FP8 scaled type convert
* Implement test for MX BF8 scaled type convert
* Scaled type convert for vectors of 2 FP8 elements
* Scaled type convert for vectors of 16 FP8 elements
* Implementation of scaled conversion from F32 to F8
* Add tests for scaled conversions from FP32 to FP8
* Add documentation to the test functions
* Implementation of scaled conversion from F32x2 to F8x2
* Implementation of scaled conversion from F32x16 to F8x16
* Implementation of scaled conversion from F32x32 to F8x32
* Implementation of scaled conversion from F8x32 to F32x32
* Verified on the emulator
* MX FP GEMM - Example Template (#277)
Temporarily uses `DeviceGemmMultiD_ABScale_Xdl_CShuffle_V3` kernel and 128x128 scaling matrices.
Must be modified to use MX-native GEMM kernell with 16 or 32 component vectors per scale.
Verified on the emulator.
* Add vector support
* Add tests
* Add missing type aliases
* Fix test naming
* only build mx example for gfx950
* disable CK_USE_AMD_MFMA_GFX950 by default
* fic build for multiple archs
* fix typo
* fix typo
* Update unpack signature
* Fix merge
* Add size checks in pack function
* Add a flag
* Add conversions
* Fix build logic
* Update pack/unpack methods
* Remove unneeded AsType accessors
* Add docstrings
* Add a flag to config file
* Test the functionality of V_MFMA_F32_16X16X128_F8F6F4 and V_MFMA_F32_32X32X64_F8F6F4 instructions. (#293)
* Introduced MFMA tests
* Verified f8f6f4 MFMA Instructions
* Move flag logic to scaled_type_convert header
* Use pointers instead of array indices
* Fix a typo
* Update tests and pack functions
* Fix gemm gemm on gfx950
* Fix clang format
* restore the default gput target lists
* fix the jenkinsfile
* add missing ifdef
---------
Co-authored-by: Jing Zhang <jizhan@amd.com>
Co-authored-by: aska-0096 <haocwang@amd.com>
Co-authored-by: Jun Liu <Liu.Jun@amd.com>
Co-authored-by: Andriy Roshchenko <andriy.roshchenko@amd.com>
Co-authored-by: Rostyslav Geyyer <rosty.geyyer@amd.com>
Co-authored-by: Rostyslav Geyyer <46627076+geyyer@users.noreply.github.com>
Co-authored-by: root <root@banff-cyxtera-s83-2.ctr.dcgpu>
Co-authored-by: Andriy Roshchenko <107577548+andriy-ca@users.noreply.github.com>
Co-authored-by: jefyang1 <146495389+jefyang1@users.noreply.github.com>
Co-authored-by: jefyang1 <Jeffreyj.Yang@amd.com>
* Add a gpu gemm reference kernel
* Switch to gpu reference in gemm examples
* Remove redundant arguments
* Update all related examples
* Update more examples
* Try less threads per block
* Try even less threads per block
* Add support for all matrix layouts
* Increase block size
* Clean up
* Remove hardcoded strides
* Clean up
* Try a column-major case
* Revert back to row-major
* Run both CPU and GPU veriffication
---------
Co-authored-by: Po Yen Chen <PoYen.Chen@amd.com>
* Move kernel implementation files under impl directory.
* Update examples paths.
* Update device kernel impl include paths.
* Update tensor operation instances include paths.
* Update profiler and tests include paths.
* Clang-format
* Update include paths for batched gemm reduce
* Refactor UnitTest ConvNDBwdWeight.
* Refactor fwd and bwd data convND UT.
* Fix used test macro.
* Fix include path.
* Fix include paths.
* Fix include paths in profiler and tests.
* Fix include paths.
Co-authored-by: Adam Osewski <aosewski@amd.com>
* Add GEMM examples for int4
Currently the source files are just copied from int8 examples
* Re-use pre-defined alias in int4 exmples
* Distinguish user-side type from kernel-side type
* Add int4_t support for check_err()
* Allow conversion between Tensor<> specializations
* Re-format source files
* Use different type for host tensors
* Re-use CopyAsType<>() to implement copy ctor
* Re-use element-wise operation type alias
* Fix typo in alias names
* Complete the int4 examples
* Add constraint to Tensor<> templated methods
* Add type traits 'is_signed_integral<>'
* Add type constraints for integer version check_err<>()
* Allow comparing different-sized integral types in check_err()
* Check converted Tensor<int4_t> with golden Tensor<int8_t>
* Remove constraint of Tensor<>::CopyAsType()
* Avoid compilation error while disabling ck::int4_t support
* Remove debug messages
* Add #error directive to prevent compile sources with wrong setting
* Simplify tensor usages in examples
* Add constraint to check_err() input reference type
* Align design with other PR
* Use ""_uz to simplify example code
* Avoid too much generalizing check_err()
* Re-format GEMM instance template arguments
* Extract int4 example common codes
* Sort include directives
* Move #include directives into new header
* Move common codes together
* Re-format template argument in example code
* Reuse same implementation code for most of GEMM examples
* Re-format common.hpp
* Unify structured comment in examples
* Use reinterpret_cast<>() for cross-type pointer conversion
* Revert "Add type traits 'is_signed_integral<>'"
This reverts commit f2c148efae.
* Allow unsigned integer arguments for check_err()
* Fix compilation error in check_err()
* Remove unnecessary copy ctor for Tensor<>
* Mark Tensor<> special member functions as 'default'
* Use more strict condition to add code in examples
* Fix wrong program return value of GEMM examples
* Handle the case while user specify all the strides
* Fix never-ran examples
* Exit successfully if GEMM instance does not support given problem
* Add missing 'else' keyword
* Re-format CMakeLists.txt
* Add wrapper function to hide value conversion while copying memory
* Add new DeviceMem API to copy memory
* Use new DeviceMem API to implement examples
* Revert "Add new DeviceMem API to copy memory"
This reverts commit 3f190b0779.
* Add conversion ctor for Tensor<>
* Write Tensor<> conversion logics explicitly in example code
* Convert Tensor<> values after transfer data to host
* format
* improving pipeline
* fix typo
* format
* adding thread group
* adding thread group
* adding thread group
* adding gemm pipeline
* tweak
* refactor
* refactor
* add missing type convert
* refactor
* refactor
* refactor
* clean
* fix build
* refactor
* format
* clean up
* use remove_cvref_t
* clean
* use pipeline_v2 for gemm kernel
* Remove inconsistent indent
* Fix compilation errors due to incomplete merge process
* Add missing include directives
* Fix compilation errors in currently unused files
* Add license in newly added files
* Re-format touched files by clang-format-10
* Fix wrong template argument count of DeviceGemm<>
* Use language construct to choose between types
* Use language construct to choose GEMM example instance
* Fix compilation error due to interface change
* Re-use type alias to avoid duplication
* Unify type alias usage in source file
* Only use v2 pipeline in one gridwise GEMM type
* Remove no-longer used include directives
* Add static_assert() to check pipeline type requirements
* Revert "Add static_assert() to check pipeline type requirements"
This reverts commit f0985f0a13.
* clean
* clean
* clean
* clean
Co-authored-by: Chao Liu <chao.liu2@amd.com>
Co-authored-by: shaojiewang <wsjmessi@163.com>
* add intrin_mfma_f64_16x16x4f64
* add example
* gemm reference add double data type
* chang init data
* fix M N PerXdlops
* fix ifdef
* add comparsion config
* add conv fwd example
* format log out
* change rc matrix egister layout
* reorganize example
* reorganize example 2
* format,because merge develop
* fix call impl adding acc data type
* lost ;
* add compiler warning
* change example tunning parameters
* add test for fp64
* add instance
* add test/gemm/gemm_fp64.cpp
* fix get name issue
* remove some tunning parameter
* fix conflict
* format
* use integer value for GEMM test
* add acc data type
* remove typeid because fp16
* fix streamconfig etc bug from merging develop
* format
* remove test_gemm_xdl_fp64
* add AccDataType
* AccDataType problem
Co-authored-by: qinletao <letaoqin@amd.com>
Co-authored-by: Chao Liu <chao.liu2@amd.com>
* validate examples in ctest runs
* format
* fix usage of check_err
* amend
* add example codes to custom target 'check'
Co-authored-by: Chao Liu <chao.liu2@amd.com>
* Convolution ND
* Code unification across dimensions for generating tensor descriptors.
* Example
* Instances
* Move convnd f32 instance file to comply with repo structure.
* Conv 1D tensor layouts.
* Formatting and use ReferenceConv
* Reference ConvFwd supporting 1D and 2D convolution.
* Debug printing TensorLayout name.
* Conv fwd 1D instance f32
* Refactor conv ND example.
Needed to support various conv dimensio.
Needed to support various conv dimensions
* Rename conv nd example director to prevent conflicts.
* Refactor some common utility to single file.
Plus some tests.
* Refactor GetHostTensorDescriptor + UT.
* Add 1D test case.
* Test reference convolution 1d/2d
* Remove some leftovers.
* Fix convolution example error for 1D
* Refactor test check errors utility function.
* Test Conv2D Fwd XDL
* More UT for 1D case.
* Parameterize input & weight initializers.
* Rename example to prevent conflicts.
* Split convnd instance into separate files for 1d/2d
* Address review comments.
* Fix data type for flops/gbytes calculations.
* Assign example number 11.
* 3D cases for convolution utility functions.
* 3D reference convolution.
* Add support for 3D convolution.
* Check for inputs bigger than 2GB.
* Formatting
* Support for bf16/f16/f32/i8 - conv instances + UT.
* Use check_err from test_util.hpp.
* Split convnd test into separate files for each dim.
* Fix data generation and use proper instances.
* Formatting
* Skip tensor initialization if not necessary.
* Fix CMakefiles.
* Remove redundant conv2d_fwd test.
* Lower problem size for conv3D UT.
* 3D case for convnd example.
* Remove leftovers after merge.
* Add Conv Specialization string to GetTypeString
* Skip instance causing numerical errors.
* Small fixes.
* Remove redundant includes.
* Fix namespace name error.
* Script for automatic testing and logging convolution fwd UTs
* Comment out numactl cmd.
* Refine weights initalization and relax rtol for fp16
* Move test_util.hpp to check_err.hpp
* Refine weights initalization and relax rtol for fp16
* Refactor common part of test conv utils.
* Move utility function to single common place.
* Add additional common functions to utility.
* Refactor convnd_fwd_xdl examples.
* Remove redundant files.
* Unify structure.
* Add constructor to ConvParams.
* And add input parameters validation.
* Modify conv examples to use single utility file.
* Remove check_error from host_tensor.hpp
* Get rid of check_indices function.
* Remove bf16_to_f32 function overload for scalars.
* Fix namespace.
* Add half_float::half for check_err.
* Fix conv params size in UT.
* Fix weights initialization for int8.
* Fix weights initialization for int8.
* Add type_convert when store output in ref conv 1D.
* Get back old conv2d_fwd_xdl operation.
* Silence conv debug print.
* format
* clean
* clean
* Fix merge.
* Fix namespace for check_err
* Formatting.
* Fix merge artifacts.
* Remove deleted header.
* Fix some includes and use ck::utils::check_err.
* Remove unused check_indices restored by previous merge.
* Fix namespaces after merge.
* Fix compilation error.
* Small fixes.
* Use common functions.
* Fix filename
* Fix namespaces.
* Fix merge artifact - retrieve removed by accident fun.
* Fix ConvForwardSpecialization.
* Adhere to coding style rules.
* Fix merge artifacts.
Co-authored-by: Adam Osewski <aosewski@amd.com>
Co-authored-by: Chao Liu <chao.liu2@amd.com>
* adding batched_gemm_and_reduction
* batched_gemm_reduce works with bactch_count=1
* fix a bug in grid_size; batched_gemm_reduce works for batch_count > 1
* adding profiler for batched_gemm_fp16
* fixed a bug in declaration of d1 and d0; both example and profiler work
* clang-format
* cleanup
* batched_gemm_reduce: add test
* minor change
* fixed some typo in function names
