* Support 16x16 (MFMA, WMMA) and 32x32 (MFMA) tiles in fwd and bwd BlockDropout
Add comments with dropout implementation details
Fix performance regression of fwd+dropout
* Remove some usage of type punning (reinterpret_cast with ref or ptr) in Philox;
* "scalarize" seed and offset, they may come either from kernel args or from device memory
(presumably loaded with vector loads).
These changes help the compiler to procude more optimal code and reduce register spilling.
Use WarpGemmDispatcher instead of explicit WarpGemmMfma... to get CWarpDstrEncoding
Use code based on BlockDropout in BlockDropoutBwd
Refactor BlockDropout (fwd)
Implement BlockDropout (fwd) for WMMA
Originally BlockDropout only supported 32x32 tiles (IsWG32 = true),
this version supports 16x16 tiles.
If MPerBlock > MWarp * 16, it can generate numbers for two 16x16 tiles, similarly
to BlockDropoutBwd.
Implement BlockDropoutBwd for WMMA
Remove MakeRandValLds* functions unused in BlockDropoutBwd
Remove unused Run overload from BlockDropoutBwd
* Fix regression with philox seed and offset when they exceed 32-bit int
__builtin_amdgcn_readfirstlane works with 32-bit values, seed and offset
are 64-bit so they get truncated.
* Add F32 MFMA warp gemms
* Support f32 in fwd FMHA
* Implement transpose_vectors for 4-byte types (float)
* Fix unexpected implicit f32->uint32 cast in buffer_store<4>
__builtin_amdgcn_raw_buffer_store_b32 expects unsigned int but float was passed (implicitly casted to uint).
mbuf_t types in other buffer_store<> are changed for consistency.
* Support F32 in bwd FMHA
hdim = 256 is disabled for now because it uses too much memory on gfx90a
* Support Headdim = 48 (divisible by 16) in fwd
* Add fp32-specific receipts (800 and 801)
* Tune fwd tiles
* Tune bwd tiles
* Use small tiles only for small seqlen_q
* Fix after rebasing
* Fix selection of a fallback tile based on bm0
The assumption that the largest bm0 == 128 is not always true for
current fp32 tiles.
* Remove constraints and adjust filtering for fp32
Custom constraints are no longer needed because now the smallest tile
is selected automtically based on seqlen_q.
Filters related to qr_async_trload disabled valid fp32 tiles.
* Add fp32 tests
* Make splitkv and appendkv compile for fp32 only
There are no instances yet, but API still must compile when only fp32 is
requested.
* Remove unimportant f32 instances
* Add test_ck_tile_fmha_*_fp32 to REGRESSION_TESTS
* Replace magic numbers with a constant, improve comments for dropout
* Update changelog
* Fix condition that dq_acc must be set to zero when mask is used
The change was introduced in #2799
* Replace warp_uniform with recently added amd_wave_read_first_lane
* Add hdim = 96 and 192 to fwd
* Fix validation of rotary embedding with time_kernel_
When rotary embedding is used, the appendkv kernel modifies the q tensor
(multiple times when time_kernel_ is set). We need to reset the q buffer
and rerun all kernels.
* Fix synchronization issue in splitkv combine pipeline
Different warps can read and then rewrite the same values of lse_acc_lds.
Sometimes warps progress at different speeds, one warp can rewrite
values that are still being read by another warp.
Running the tests multiple times and, preferably, with multiple
processes on the same GPU helps to trigger this issue:
bin/test_ck_tile_fmha_fwd_fp16 --gtest_repeat=-1 --gtest_shuffle --gtest_throw_on_failure --gtest_filter="TestCkTileFmhaFwd/*KV*"
* feat(grouped_gemm_multi_d): add new example that integrates grouped_gemm and multi_d_gemm feature
* feat: generalized grouped_gemm_kernel.hpp
* feat: generalized grouped_gemm_kernel.hpp even further by removing hardcoded 0
* refactor: grouped_gemm_multi_d relies on grouped_gemm_kernel
* tests(grouped_gemm): grouped_gemm test suite passes with minor adjustments
* fix: segfault fix by passing correct parameters for d tensors
* docs: add multi d info and trim down outdated content
* tests: add unit tests for grouped_gemm_multi_d and minor changes in grouped_gemm related test for compatibility
* style: clang format
* fix: incorrect validation method and Dtensor layout in test suite
* * [CK_TILE] Add sequence padding and variable length support in fmha (and v3)
- Group Mode Padding: Introduces the `-s_qpad` argument to support
physically padded layouts. Kernels now use padded start pointers
(`seqstart_padded_*_ptr`) for memory addressing.
- Batch Mode Variable Length: Adds `-q_eff_lens` and `-kv_eff_lens`
arguments for efficient processing of variable-length sequences by
passing cumulative effective lengths (`cu_seqlen_*_ptr`) to the kernel.
- FMHA examples: Support padding and variable length both in
group and batch mode. Dispatcher is updated as well (dispatch to
kPadSeqLenK enabled pipeline).
- New padding test cases: Add padding test cases to `smoke_test_fwd.sh` and
`test_fmha_fwd.inc`, and add benchmarks to `benchmark_fwd.sh` and
`benchmark_fwd_v3.sh` as well. These test cases and benchmarks that
specifically validate/benchmark the new padding and variable-length
functionalities in both group and batch modes.
* [CK_TILE] Fix build error in fmha unit tests
* [CK_TILE] add mqa, gqa to sequence padding unit tests
* [CI_TILE] Reduce the number of padding seqlen unit tests in FMHA to avoid timeouts in CI
* [CK_TILE] remove unnecessary MageKArgs overload in FmhaFwdV3Kernel and FmhaFwdKernel
* Remove C++20 code
C++20 features should not be used in CK. Remove all C++20 code.
* fix c++17 build
* format
* fix merge issue
---------
Co-authored-by: Thomas Ning <Thomas.Ning@amd.com>
Co-authored-by: Max Podkorytov <4273004+tenpercent@users.noreply.github.com>
* Update grouped_gemm example and pipeline
* find the root cause error in did not enable the transpose in gfx950 correctly
* Fix v3 pipeline, row and col major
* Disable f8 datatype tests, it fails on gfx950
* fix the abd test by clear the runtime argument unsupported
---------
Co-authored-by: AviralGoelAMD <aviral.goel@amd.com>
Co-authored-by: Mateusz Ozga <mateusz.ozga@amd.com>
* rename gemm_group_quant to gemm_quant
* Add TensorWise quant mode
* Cshuffle epilogue tests with tensor scaling
* Add tensor quant to example
* Don't use readfirstlane for reading scales - doesn't work for some reason
* Add to changelog
* revert include - from a merge problem?
* revert common.hpp include
* revert host.hpp include
* remove unused utility function
* rename quant pipeline problem
* refactor quant tests
* remove aquant utils
* use TEST_F
* fix all tests by changing gemm config
* Use typed tests
* fix copyright
* [CK_TILE] Add sequence padding and variable length support in fmha (and v3)
- Group Mode Padding: Introduces the `-s_qpad` argument to support
physically padded layouts. Kernels now use padded start pointers
(`seqstart_padded_*_ptr`) for memory addressing.
- Batch Mode Variable Length: Adds `-q_eff_lens` and `-kv_eff_lens`
arguments for efficient processing of variable-length sequences by
passing cumulative effective lengths (`cu_seqlen_*_ptr`) to the kernel.
- FMHA examples: Support padding and variable length both in
group and batch mode. Dispatcher is updated as well (dispatch to
kPadSeqLenK enabled pipeline).
- New padding test cases: Add padding test cases to `smoke_test_fwd.sh`,
and add benchmarks to `benchmark_fwd.sh` and `benchmark_fwd_v3.sh` as well.
These test cases and benchmarks that specifically validate/benchmark the
new padding and variable-length functionalities in both group and batch modes.
* [CK_TILE] Fix build error in fmha unit tests
---------
Co-authored-by: Po Yen Chen <PoYen.Chen@amd.com>
Co-authored-by: Yi DING <yi.ding@amd.com>
* change host using fp16 to check
* fp8 to fp8 compare
* rewrite input parameters
* add not squant
* remove some output code
* for scale = 1
* format
* saturates only for fp8
* add fp8bf16 data type
* add fp8bf16 data type
* fix test fp8 code
* add run_fp8bf16_tests
* change fmha fwd example parameter(adding fp8bf16)
* Support fp8bf16 for Aiter
* Support aiter fp8bf16 in c++
* fix comment about fp8 in readme.md
* add fp8fp32
* add fp8fp32 test
* remove range_q etc.
* format
* fix test parameters about squant and fmha example input fp8bf16 fp8fp32 data type
* add fp8bf16 to data_type function
* change colmajor to rowmajor in test_ck_tile_fmha_fwd_fp8
* format
* reset atol for fp8
* fix bug for atol
---------
Co-authored-by: rocking <ChunYu.Lai@amd.com>
Co-authored-by: asleepzzz <hanwen.chang@amd.com>
* Revert "Revert "feature:tf32:add initial conv3d fwd kernel support (#2763)" (#2848)"
This reverts commit 03b59f8c76.
* fix compile error on gf12x
* only run tf32 example on gfx942
* only build tf32 instance on gfx942
* ckProfiler:only support tf32 in gfx942
* delete unuseful messages
* fix(grouped_gemm): numerical errors on gfx950 by correctly calculating the tail num
* WIP: add temp config to stress test numerical error correction
* refactor: remove comments
- profiler for gemm quantization for DL/XDL
- tests for gemm quantization for DL/XDL
- implementation for gemm quantization for WMMA
- profiler/tests for gemm qunatization for WMMA
Co-authored-by: Illia Silin <98187287+illsilin@users.noreply.github.com>
* test(grouped_gemm): add gtests for the example to maintain its integrity
* test(grouped_gemm_preshuffle): add prefill variant to testbed to cover wider range
* fix: removed residue code to make b_shuffle() work again
* test(grouped_gemm_preshuffle): limit the test suite to gfx942 arch as it fails on gfx90a
* build: add gfx950 as build target for gtests
* test(grouped_gemm_preshuffle): temporarily disable fp8 prec tests due to numerical errors
* fix(grouped_gemm_preshuffle): resolved fp8 tests failure on gfx950 by adding correct compiler flag
* Use lse = false for PagedKV tests
There are no instances with lse = true so splitkv is actually launched
as a fallback.
* Reduce build time by disabling instances that are not tested
Added gemm + reduce instance library for RDNA4. This includes:
- New device implementation running GEMM and reduction kernel
- instances for wmma (xdl parity)
- examples for wmma (xdl parity)
- tests for existing xdl and wmma
-Added parameter to enable/disable verification and timing of kernel in various examples that missed it.
-Added parameter to change number of groups to execute in grouped_gemm_examples.
Signed-off-by: Michal Kulikowski <Michal.Kulikowski@amd.com>
1. Refine Reduce2dShape to support both wave32 and wave64
2. Fix example reduce, permute and elementwise on gfx11 and gfx12
---------
Co-authored-by: Illia Silin <98187287+illsilin@users.noreply.github.com>
* initial commit
* remove extra files
* fixing errors
* updated ReadMe file for mapping of diff quants with diff configs
* addressing review comments
* addressing review comments
* Resolved merge conflicts
* [CK TILE GEMM] Replace get_preshuffle_or with is_quantpreshuffle_enabled
The get_preshuffle_or was not working as expected, which led to incorrect behavior
in the quantization preshuffle process. This change replaces it with the more reliable
is_quantpreshuffle_enabled function to properly determine when preshuffle should be applied.
---------
Co-authored-by: Cong Ma <congma13@amd.com>
* Improve random number generation
* use different seed for each input (Q, K, V...);
* use deterministic generation of:
* seqstart_q/k (for group mode);
* block_table (for paged-kvcahe);
* cache_batch_idx (for kvcache);
* Extract arg_parser-related code from run functions to use them as tests
* Split examples into main programs and fmha runners, build instances separately
* Add dummy tests that use instances and runners
* Fix a missed corner case of f32->f8 conversion
When value if < min f8 denormal but > min f8 denormal / 2, it must be
rounded to min f8 denormal (i.e. 0b1), not to 0.
* Fix incorrect fp8 scales for P and O in validation code
DataTypeConfig was incorrectly compared with fp8_t.
* Add host generation of dropout random values and use it for validation
Previously host validation (reference_batched_dropout) used random
numbers generated by BlockDropout of the kernel, meaning that incorrect
generation on device (bad distribution, repeated numbers, too many zeros,
etc.) would not trigger any validation errors.
* Implement tests from smoke_test_bwd.sh
* Return result as enum to distinguish failure and missing instance
* Add tests for bwd features: bias, alibi, dropout
* Implement tests from smoke_test_fwd.sh
* Pass seqlen_q/k as vectors to fwd and bwd runners
* Add tests for fwd features: bias, alibi, dropout
* Add tests for pagedkv and splitkv
* Fix conditions when to use splitkv and pagedkv kernels
splitkv was executed only when use_kvcache which == (need_append_kvcache || use_cache_batch_idx || 0 < page_block_size).
In the SplitKV tests: the regular fwd kernel was executed if use_cache_batch_idx was not requested even when num_splitkv > 1.
In the AppendKV tests: the pagedkv kernel was executed but it often failed to find an instance.
* Add tests for appendkv
* Use is_v_rowmajor = true because there are no instances with column layout anymore
* Split public and private compile options for instances
Tests and examples need to know only about CK_TILE_FMHA_FWD_*_API.
* Improve parsing validation in bias and mask
* Pass bias as string for consistency with mask
* Catch parsing and other exceptions
* Add bwd test for deterministic flag
* Initialize fp8 tensors (-init=ufq) similarly to uf
* Fix splitkv/pagedkv invocation: use padded sk when seqlen_k_ptr is not null
seqlen_k cannot be used to determine padding when seqlen_k_ptr is
provided. The actual seqlen_k is taken from seqlen_k_ptr[b].
Even seqlen_k values (% bn0 == 0) use padded seqlen_k while seqlen_k_ptr
may contain arbitrary values.
In the example or tests this produces incorrect results with appendkv
(for example, -d=32 -s=1 -s_k=64 -s_knew=7 -vlayout=c -b=8).
* Fix use_pagedkv value when kvcache = true but page_block_size = 0
In this case block_table_ptr is nullptr which is accessed in the kernel.
* Clean up bwd tests
* Unify fwd tests for f16/bf16 and fp8
* Use better explicit instantiation declaration for fmha_bwd<2>
* Use the same seed for all tests, allow to override it with env variable
* Undo clang-format of one irrelevant file
For some reason my local clang-format-18 and the one in CI work differently.
* Do not build instances and tests on unsupported archs
* Build instance libraries as OBJECT library
* CI: Enable sccache for HIP
There are source files with LANGUAGE HIP, they need
-DCMAKE_HIP_COMPILER_LAUNCHER=sccache
* Add tests to REGRESSION_TESTS
* Fix OOB accesses in deterministic bwd due to incorrectly assumed kN0
The runner assumes kN0 = (hdim_q <= 128) ? 128 : 64 but there are
smaller tiles (for tr_load or fp32). This can create too small dq_acc_buf.
* Pass CK_TILE_FMHA_FWD_*_API as INTERFACE compile options
The instances don't actually depend on them, only examples and tests do.
Passing these definitions as INTERFACE allows to change FMHA_FWD_ENABLE_APIS
without recompiling instances that are already in ccache.
* Fix formatting and names
BlockWarps, WarpTile in Generic2dBlockShape are wave size dependent, it causes mangled name mismatch between host and device side.
Solution: Replace them with ThreadPerBlock and move BlockWarps, WarpTile calculation into Generic2dBlockShape
