* enable batched_gemm_softmax_gemm_perm_wmma for gfx12
* disable instances with blocksize=256 in attention examples
* debuggging
* debug
* fixed lds_enabled
* debugging
* Fix and add limit to skiplds feature
* Enable skipLds feature and fix compilation bugs
* add ck_tile definitions for gfx12
* fix clang format and test/wmma_op
* updage instances cmake for gfx12
* disable the test_wmma_op on gfx12
* fix the builds for gfx950
* add gfx12 and gfx950 to default target list
* clean-up cmake file
* Initial introduction of OFP8 data types.
* Renamed FP8 and BF8 tests into FP8_FNUZ and BF8_FNUZ.
* Implementation of ConvertFP32Nearest in test_fp8_ocp.
* Remove dependence on possibly undeclared alias.
* Implement FP8OCP test for stochastic rounding mode.
* Implement FP8OCP tests for half_t type conversions.
* enable bf16 atomic add on gfx950
* Implement ConvertFP32Nearest test.
* Implement ConvertFP32Stochastic test.
* Implement ConvertFP16Nearest and ConvertFP16Stochastic tests.
* Refactoring. Move FP8 definitions into a separate header file.
* Enable easy switching between architectures.
* Fix compilation error for gfx942 architecture.
* Add fp4 type with constants
* only builf gfx950 branch for gfx950 target by default
* Enable OCP build of example_gemm_xdl_fp8.
* Fix formatting.
* fix the build logic for gfx950
* Improve GEMM example verbosity.
* Add constexpr where applicable.
* fix the logic of enabling XDL and WMMA instances
* Improve GEMM example verbosity.
* Enable build of example_gemm_xdl_fp8_bf8 test.
* Fix tests for gfx1101 architecture.
* Build DPP examples only on gfx103 and gfx11 architectures.
* Optionaly run either CPU or GPU verifications with GEMM examples.
* Extend GeneratorTensor_Sequential to produce values of prescribed data types.
* Add missing constructor.
* Add scale type and mxfp conversions
* Update conversions
* Add conversion tests
* Fix typo
* Improve infrastructure for OFP8 data type support.
* BUGFIX. Should not use FP8 as Compute/Accum data type.
* Add custom target for grouped_convnd_bwd_weight tests.
* Can build `tests` target on gfx950.
* Bugfixes on gfx1101 architecture.
* Fix dependencies.
* Add stochastic rounding tests
* Provide single point of truth for FP8 INF and NAN checks
* Prevent instantiation of operators that are not supported by FP8 data types
* Add FP8 type selection into client_axample CMakeLists.txt
* Prevent sccache server from shutting down during build
* Fix test success reporting logic
* Change default verification method to CPU.
GPU verification takes too much time to complete on the emulator.
* Add scale <-> float conversions
* Add scaled conversions with tests
* Add device conversions
* Make sure all tests and examples are built for gfx950
* Facilitate testing of FP8 data types on the emulator
* Introduce two new tensor generators
* Enable instances built for gfx94 to be built on gfx950
* Verify 35_splitk_gemm on floating point numbers.
splitk gemm appears to be losing precision VS reference implementation when FP numbers are involved.
* Format
* Verify 04_gemm_add_add_fastgelu on floating point numbers
* Verify 20_grouped_conv_bwd_weight on floating point numbers
* Verify 38_grouped_conv_bwd_data_multiple_d on floating point numbers
* Verify more tests on floating point data
* Fix data types and improve testing verbocity.
* Add fp4 vectors
* Add debug tests
* Upgrade to NPI 573 build docker.
* Skip on gemm_universal tests.
The tests take too long to complete on the emulator.
Need to see if it is possible to reduce the scope of the testing to just FP8 data types.
* Add new mfma instructions and examples
* Add preprocessor directives for gfx950 specific code
* Fix gfx1101 build
* Document test availability
* Re-enable fp8 gemms for gfx94/95
* Cherry-pick GEMM Universal tests for FP8 data types
* Cleanup
* Add vector types and tests
* Add check_err function
* Add tensor generators
* CK_USE_GFX94 has already been set on this branch
* Fix
* Address formatting issues and leftovers
* Make fail/pass logic consistent within 01_gemm folder
Removed multiple negations in fail/pass logic to propagate `true` as the success indicator.
* Fix GPU verification reporting logic.
* Update year in copyright notice.
* Cleanup
* Use `enum class` instead of `enum`
* Remove set_property for FP8 tests
* Add vector conversions
* Fix
* Fix linker errror
* Clean up
* Fix gfx950 conversions
* Clean up
* Fix more gfx950 conversions
* Fix even more gfx950 conversions
* Narrowing the scope of PR to OCP FP8 enablement only
* Add tests for OCP FP8 vector_type storage
* Fix client examples build
* Fix typo
* Update e8m0 casting
* Rename E8M0 type
* Update unpack method
* Cleanup merge artifacts
* Enable gemm kernel on all gfx9 architectures (#227)
* clean-up
* Implement `non_native_vector_base` with `ext_vector_type` array. (#232)
* Enable support of 1, 2, 4, and 8-byte custom types in CK.
* Fix pool tests for OCP FP8 data type
* Fix build
* Add ckProfiler gemm instances for new mfma instructions and fix ckProfiler build on gfx950
* fix clang format
* Add new mfma instructions and examples
* Add preprocessor directives for gfx950 specific code
* Add ckProfiler gemm instances for new mfma instructions and fix ckProfiler build on gfx950
* fix clang format
* Fix clang format for the newly merged files
* Use the existing example instances for fp16 bf16 and int8
* Remove comment on new mfma instructions in MfmaInstr
* Update include/ck/tensor_operation/gpu/grid/gridwise_batched_gemm_gemm_xdl_cshuffle_v1.hpp
Co-authored-by: Andriy Roshchenko <107577548+andriy-ca@users.noreply.github.com>
* merge from public repo
* Fix ck build
* Fix ck build
* Use double for max_abs_in_val
* Move scaled_type_convert functions to a separate header (#251)
* re-enable building mha lib and gemm_universal_f8 instances for gfx950
* Update library/src/tensor_operation_instance/gpu/CMakeLists.txt
Co-authored-by: Andriy Roshchenko <107577548+andriy-ca@users.noreply.github.com>
* fix typo for CK_USE_OCP_FP8
* fix typo for CK_USE_OCP_FP8
* Add FP6 and BF6 types (#261)
* Add a rounding flag
* Add FP6 and BF6
* Add tests
Co-authored-by: Andriy Roshchenko <107577548+andriy-ca@users.noreply.github.com>
* Clean up
---------
Co-authored-by: Andriy Roshchenko <107577548+andriy-ca@users.noreply.github.com>
* fix one more typo
* Refactor E8M0 scale implementation (#262)
* Refactor E8M0 scale implementation
* Add MXFP6 and MXBF6 conversion methods (#270)
* Add conversions
* Add tests
* Add docstrings
* Add scaled conversions
* Add fp6/bf6 tests
* Remove misleading fp4 test case
* Add docstrings
* Clean up
* Address comments
* Set stricter tolerances for RNE tests
* Add missing tests
* Add native conversions to float
* Revert "Add native conversions to float"
This reverts commit 09467111f73b753c8cc3d597533b187940353dab.
* Update copyright years
* replace the fp6 with bf6 convert calls in test_bf6
* fix test_bf6
* enable smfmac test
* [MX FP8] Add Scaled Type Convert Functions for OCP FP8/BF8 data types (#271)
* Move scaled_type_convert functions to a separate header
* Introduce MX data tests
* Build MX tests only on relevant architectures
* Refactor E8M0 scale implementation
* Fix `config.h` typo
* Cleanup deprecated symbols
* Refactor `amd_ck_fp8.hpp`
* `scaled_type_convert` for `f8_ocp_t`
* Implement test for MX FP8 scaled type convert
* Implement test for MX BF8 scaled type convert
* Scaled type convert for vectors of 2 FP8 elements
* Scaled type convert for vectors of 16 FP8 elements
* Implementation of scaled conversion from F32 to F8
* Add tests for scaled conversions from FP32 to FP8
* Add documentation to the test functions
* Implementation of scaled conversion from F32x2 to F8x2
* Implementation of scaled conversion from F32x16 to F8x16
* Implementation of scaled conversion from F32x32 to F8x32
* Implementation of scaled conversion from F8x32 to F32x32
* Verified on the emulator
* MX FP GEMM - Example Template (#277)
Temporarily uses `DeviceGemmMultiD_ABScale_Xdl_CShuffle_V3` kernel and 128x128 scaling matrices.
Must be modified to use MX-native GEMM kernell with 16 or 32 component vectors per scale.
Verified on the emulator.
* Add vector support
* Add tests
* Add missing type aliases
* Fix test naming
* only build mx example for gfx950
* disable CK_USE_AMD_MFMA_GFX950 by default
* fic build for multiple archs
* fix typo
* fix typo
* Update unpack signature
* Fix merge
* Add size checks in pack function
* Add a flag
* Add conversions
* Fix build logic
* Update pack/unpack methods
* Remove unneeded AsType accessors
* Add docstrings
* Add a flag to config file
* Test the functionality of V_MFMA_F32_16X16X128_F8F6F4 and V_MFMA_F32_32X32X64_F8F6F4 instructions. (#293)
* Introduced MFMA tests
* Verified f8f6f4 MFMA Instructions
* Move flag logic to scaled_type_convert header
* Use pointers instead of array indices
* Fix a typo
* Update tests and pack functions
* Fix gemm gemm on gfx950
* Fix clang format
* restore the default gput target lists
* fix the jenkinsfile
* add missing ifdef
---------
Co-authored-by: Jing Zhang <jizhan@amd.com>
Co-authored-by: aska-0096 <haocwang@amd.com>
Co-authored-by: Jun Liu <Liu.Jun@amd.com>
Co-authored-by: Andriy Roshchenko <andriy.roshchenko@amd.com>
Co-authored-by: Rostyslav Geyyer <rosty.geyyer@amd.com>
Co-authored-by: Rostyslav Geyyer <46627076+geyyer@users.noreply.github.com>
Co-authored-by: root <root@banff-cyxtera-s83-2.ctr.dcgpu>
Co-authored-by: Andriy Roshchenko <107577548+andriy-ca@users.noreply.github.com>
Co-authored-by: jefyang1 <146495389+jefyang1@users.noreply.github.com>
Co-authored-by: jefyang1 <Jeffreyj.Yang@amd.com>
* smoke and regression targets working with tests
* test filters work for both examples and test
* removed uneccesary comments
* added a missing comment
* added a missing comment
* fixed typo in the comments
* updated README
* Update PULL_REQUEST_TEMPLATE.md
updating the template for future addition of test cases
* Update PULL_REQUEST_TEMPLATE.md
* Disable building DPP kernels by default
* Disable building dpp instances, examples, or tests if DPP_KERNELS is not set
* Add new DPP_KERNELS flag to readme
* set individual gpu targets for instances, examples, tests
* fix path to hip compiler
* fix path to hip compiler once more
* aggregate device macros in ck_tile config header
* fix the cmake logic for instances
* fix clang format
* add gfx900 and gfx906 to default set of targets
* add alibi support
* fix code
* update code based on comment
* Support more hdim
* fix fp8 bias
* support seqlen_k=0 case
* remove unused printf
* fix format
---------
Co-authored-by: rocking <ChunYu.Lai@amd.com>
* parse examples inside the add_example_executable function
* fix the example 64 cmake file
* add xdl flag to the gemm_bias_softmax_gemm_permute example
* add filtering of tests based on architecture type
* enable test_grouped_gemm for gfx9 only
* enable test_transpose only for gfx9
* only linnk test_transpose if it gets built
* split the gemm instances by architectures
* split gemm_bilinear,grouped_conv_bwd_weight instances by targets
* split instances by architecture
* split grouped_conv instances by architecture
* fix clang format
* fix the if-else logic in group_conv headers
* small fix for grouped convolution instances
* fix the grouped conv bwd weight dl instances
* fix client examples
* only enable client examples 3 and 4 on gfx9
* set the gfx9 macro
* make sure the architecture macros are set by cmake
* use separate set of xdl/wmma flags for host code
* sinmplify the main cmake file
* add conv_fwd_bf8 instance declaration
* enable compilation of INSTANCES_ONLY for Windows
* suppress ROCMChecks warnings on GoogleTests
* suppress -Wfloat-equal warning on GoogleTests
---------
Co-authored-by: Illia Silin <98187287+illsilin@users.noreply.github.com>
* adding files for F32 example
* adding functioning implementation with scalar multiplication and unary operator support
* added fp 16 type check in unary square
* updating scalar multiplication as an operator
* functioning version with scalar operator
* changing strides for col major
* updated column major implementation
* working column major implementation
* cleaned up comments, rearranged/renamed files
* small edits to 3d transpose profiler
* adding test/profiler/instance files for hipTensor permute unit test
* added more test instances
* cleaned up errors, randomized input tensor, added more instances
* turned off time printouts
* removed conflicting transpose profiler
* rearranged some files
* rename folder
* Add type string
* Remove typo
* Add deviceOp to backward x
* Add comment to describe the behavior of backward normalization
* Add kernel function, prepare to implement
* implement generic kernel
* Check vector size
* Add sweep once pipeline for small reduce size
* Fix bug of KRaw_ error
* Fix bug of dx stride
* sanity check for mean and rstd
* backward x for groupnorm
* Add bwd x instance
* add layernorm 2d bwd gamma beta instances
* Change save mean var type from f32 to f16 in f16 mode
* Change the example to f16
* Add groupnorm bwd gamma beta instance
* Add groupnorm bwd x instance
* Fix naming
* Add layernorm bwd x ckprofiler
* Add groupnorm bwd x profiler
* clang format
* Rename bwd x to bwd data
* Fix bug of verification in profiler
* Add test of layernorm and groupnorm bwd data
* Add missing cmake
* Add layernorm2d bwd data
* rename fwd example
* Add groupnorm client example
* Fix typo. replace Invarient with Invariant
* Add checking before running the best instance
* added working example for 5D input using 1D kernel
* example with 5D input tensor and 2d kernel - not working: issues with arguments
* added updated version of 3d device op - changed descriptors/dims
* added example file to check kernel
* fixed descriptor and isSupportedArgument stride problem
* added and modified kernel for 3d - updated tids/loop
* adding some more 5d example files
* fixed some issues
* changes made for testing
* working version: fixed error in stride for A, still a bit inefficient
* cleaned up formatting/comments
* updating formatting
* more formatting fixes
* fixing cmake, adding back gpu targets in cmake script
* adding client example
* added instances for client example
* fixed errors in client example
* implemented client ex with device_elementwise.hpp and device_elementwise_3d_impl.hpp
* removed extra files
* minor formatting and naming fixes
* adding test files and profiler
* fixing minor error
* minor fix
* removed unneccesary comments, renamed files
* updated instance list for client example, added different layout example
* removing instances
* fixed error in instance generation
* remove comments
* update profiler and client example tensor layouts
* fixed errors in test/profiler
* updated vector dim access to enable vector load
* updated test/profiler files
* updated example with 1d kernel
* updating profiler
* renamed files
---------
Co-authored-by: Jing Zhang <jizha@amd.com>
* Rename folder
* Add layernorm 4d fwd example
* Rename original layernorm example
* Add layernorm 4d f16 test
* Add layernorm4d_fwd client example
* Support layernorm4D in ckProfiler
* Rename groupnorm to groupnorm fwd in example
* Rename layernorm and group fwd in test
* Rename normalization to normalization_fwd (instances)
* Add fwd to DeviceNormalization
* Rename external api header
* Rename folder, because we can also add bwd in this folder
* Add fwd in layernorm and groupnorm (profiler
* Fix compile error
---------
Co-authored-by: Po Yen Chen <PoYen.Chen@amd.com>
* Fix instances dtype check
* Fix source dtypes seletor for examples and tests
* Sync with new cmakefile changes
* Remove not needed ifdefs
* Remove not needed ifdefs
* Add column to image kernel
* Minor fixes for dtypes and client examples
* Disable tests for disabled dtypes
* Disable add instances functions for disabled data types
* Minor stylistic fixes
* Revert "Disable add instances functions for disabled data types"
This reverts commit 728b869563.
* Instances reduction
* Add comments in device_column_to_image_impl
* Update changelog and Copyrights
* Improve changelog
* refactor cmake files for the tests
* refactor cmake files for examples
* fix cmake for gemm example
* fix the cmake file for all examples
* add splitting by data types in gemm_splitk instance header
* rename test to reflect only dl instances are used
* clean up CI workspace, update cmake for instances
* change the jenkinsfile syntax
* build all instances except DL on gfx11
* move workspace cleanup after stages
* clean up workspace after every stage
* isolate data types in grouped_conv_fwd header
* isolate dl instances for grouped_conv2d_fwd
* fix syntax
* fix cmake and batchnorm instances
* fix typo
* fix reduction instances
* fix grouped_conv headers
* fix syntax
* replace parsing logic for instances, replace bfp16 with bf16
* fix the client examples build
* clean up DTYPES from instances cmake files
* update the parsing logic in cmake files
* make an exception for reduction kernels
* update few remaining cmake files to handle DTYPES
* fix syntax
* fix cmake conflicts
* replace f8 with fp8 test name
* resolve conflicts for dpp instances
* Add image to column kernel
* Add instances, tests, profiler, example
* Add client example
* Several fixes of image to column
* Fix variable name in device_image_to_column_impl
* Several fixes of image to column profiler
* Fix num_btype calculation
* Make new mesaurements for correct bytes calculation
* Add maxpool instances
* Rename index pool to max pool.
* Add maxpool bwd bf16 instances
* Add avg pool bwd instances
* Rename avgpool and maxpool to avg_pool3d and max_pool
* Add bf16 pool fwd instances
* Add max pool bwd to ckProfiler
* Add avg pool3d bwd to ckProfiler
* Add avg pool bwd test
* Fix bug of reference pool fwd (dilation)
* Fix bug of max pool bwd (dilation and initZero)
* Support bf16 compute data type
* Force compute type be f32. Because atomicAdd only support f32
* Add max pool bwd test
* Rename folder
* Rename pool
* Add max pool bwd client example
* Add avg pool bwd client example
* Add missing workspace
* clang format
* Rename macro
* remove useless header
* remove useless layout
* properly split conv_nd_bwd_data instances
* split conv2d_fwd instance data types
* split the gemm, conv2d_fwd and batched_gemm_softamx_gemm
* split the tests by data types where possible
* filter examples by DTYPES
* split few remaining examples by DTYPES
* filter most instances by DTYPES
* add new lines at end of headers, fix grouped_gemm profiler
* fix syntax
* split the ckprofiler instances by DTYPES
* split the conv2d and quantization DL and XDL instances
* fix the splitting of conv2d DL instances
* split softmax and pool_fwd tests for fp16 and fp32 types
* fix syntax
* fix the dl_int8 quantization instances isolation
* Expand the base class of pool2d, prepare to share base class with pool3d
* Add pool3d device op
* Add pool3d f16 example
* Refactor the base class. implement generic pooling in the future
* clang format
* get original index in max pooling
* Add outputindex to base class
* Fix dimension
* Add pooling instance
* Use indexType instead
* Remove useless header
* Extract IndexDataType to template
* Extract pooling reference code
* clang format
* clang format
* Fix typo
* Add tensor stride
* Add missing header
* Add index stride and output stride
* Refine naming
* Add type to base class
* Rename file
* Use proper size
* Fix typo
* Refine naming
* Modify the argument into vector.
* Add max pool profiler
* Refine naming
* Support f32 pool
* Fix typo
* Add avg pool2d fwd in profiler
* clang format
* Rename AccDatatype to ComputeDatatype
* Fix init
* test pool
* Extract variable
* Add client example
* Check the pooling dim
* clang format
* Connect argv and arg_parser
* Add found check
* Remove useless header
* Refine naming
* Adjust the order of device_pool_fwd
* Add contraction profiler and tests
* Build and style fixes
* Allow to use any elementwise operator for ref_contraction
* Introduce profile_contraction_scale and profile_contraction_bilinear
* Make ref_contraction generic and extend interface tests
* Stylistic minor fixes
* Extend test_contraction_interface
* Add gemm + layernorm instance
* Add ckProfiler
* Add test
* Add client example
* Detect if user forger to set the workrspace
* Use literal in the example
* [What] use builtin function for sqrt
[Why] compiler will not use v_sqrt_f64_e64 if we use ::sqrt()
* check gemm vaildity in IsSupportedArgument
* Add more testcases
* Merge duplicated folder in client example
* Print more infomation
* Use better kernel parameter for MS problem size
* clang format
* Add constexpr for if condition and remove redundant include
* Remove cstdlib and add constexpr
* wmma_op + unit test
* add arch limitation to wmma test
* change arch limitation
* Refactor + Add all type unit test(int4 compile failed)
* Add f32_16x16x16_bf16 unit test
* Remote int4 related
* delete deprecated test
Co-authored-by: Po Yen Chen <PoYen.Chen@amd.com>
Co-authored-by: Chao Liu <chao.liu2@amd.com>
* Re-structure ckProfiler source files
* Rename profiler.cpp to main.cpp
* Modularize ckProfiler operations
* Add description for profiler operations
* Use longer name to avoid name collision
* Use macro to delay expansion
* Use std::move() to avoid object copying
* Prohibit users from calling dtor
* Use macro to eliminate redundant code
* Make friend function hidden
* Add missing include directive <iostream>
* Fix wrong include directives
* Remove int8 from batchnorm-forward instances since it is not needed for forward training and could fail test
Co-authored-by: Qianfeng Zhang <Qianfeng.Zhang@amd.com>
* Refine the device batchnorm-backward base API templates and data type assignments
* Remove duplicated kernel file
* Add batchnorm backward instances and external API
* Add batchnorm-backward profiler and tests
* Add client example which uses batchnorm backward external API
* Merge test/batchnorm_fwd and test/batchnorm_bwd into one directory
* Loose the threshold for batchnorm-backward check_err()
* Update to device_batchnorm_forward base class to include all template parameters for problem description
* Add batchnorm forward instances and external api
* Add batchnorm forward profiler module which uses the external api
* Add some comments in batchnorm_forward example to explain the dimensions in lengths[]
* Replace the reference_batchnorm_forward_nhwc_c by generic reference_batchnorm_forward
* Improvement to the batchnorm infer base API
* Add batchnorm forward client example which shows using the batchnorm forward external API
* Add test for batchnorm forward
* Tuning the batchnorm profiler initialized values and error threshold
* Add support for bhalf_t in instances/external api/tests
* Add support for int8_t in instances/external api/tests
* Add support for double in instances/external api/tests
* Let ScaleDataType and BiasDataType be same as XDataType and YDataType when creating instances
* Checking before running best instance in batchnorm_fwd_nhwc client example
* Add checking for YElementwiseOp in batchnorm_forward external API
* Add more types in batchnorm forward profiler
* Add more test lengths
Co-authored-by: rocking5566 <ChunYu.Lai@amd.com>
* Remove redundant CMake setting
* Extract common code from files
* Rename folder 'convnd' to 'conv'
* Use std::array<> to accept compile-time kwnown # of arguments
* Fix compilation error of tuning parameter
* In example, use same setting as unit-test
* Remove no-longer used include directive
* Add interface for grouped conv bwd weight
* Add group support for conv bwd weight
* Add grouped conv bwd weight example
* Use group parameter in example
* Rename example folder
* Remove non-grouped version example source files
* Rename device op template
* Add group support to convolution backward weight
* Remove debug messages
* Use smaller group size in example
* Use named variable as loop terminate condition
* Prettify example output message
* Enlarge used grid size
* Allow real grid size exceeds expected grid size
* Rename interface file
* Add client example for grouped conv2d bwd weight
* Fix wrong include directive
* Rename client example folder
* add fused addition lyernorm
* add fused addition lyernorm
* changed CMakelist
* removed annotates
* modified descriptor of C
* fixed bug in gridwise add layernorm
* format the files
* modified name from add&layernorm into elementwise&layernorm
* created fused elementwise layernorm branch
* change input into tuple type
* add sweep once to reduce load & read of C from global memory
* modified Argument api
* modified way to malloc c in global memory
* changed gamma and beta to m_k_desc
* fixed bug when sweep once and move CDataType when define device level struct
* add src dim for gamma and beta
* implement optimization for coalesced
* delete a annotation line
* fixed some bug to meet the requirements of ck
* add bandwidth computing in example, and fixed the time unit
* move device_elementwise_layernorm_impl.hpp into device/impl
* fixed bug in device_elementwise_layernorm_impl.hpp
* changed name from layernorm into normalization
* clang-format the changed files
* changed the names
* moved immidiate results into lds, it become faster in non-sweeponce cases
* changed naming of C into X to make the defination more clear
* changed naming in example
* add tests for elementwise normalization
* move example_elementwise_layernorm_blockwise into folder 44_elementwise_normalization
* move test_elementwise_layernorm_fp16 into new folder
* move elementwise_normalization_instances into a new folder
* add more tests in test_elementwise_layernorm_fp16.cpp
* added some corner cases in test
* fixed method to compute lds size for matrix X
* changed name of 44_elementwise_normalization into 45_elementwise_normalization
* modified some comments
* modified some other confused comments
* reduce redundant tests in test_elementwise_layernorm_fp16.cpp
* reopen masking att instance due to CI is upgraded
* re-enable instances previously failed on 9110
* enable ksize-kpadding pair validity test
* add non-masked attention+permute test; expose masking boolean to attention kernel handles
* disable bench
* fix test
* move files
* bulk rename batched_gemm_masking_scale_softmax_gemm_permute to batched_gemm_softmax_gemm_permute
* format
* amend rename
* disable bench in test
* add mask/no-mask test for non-permute attention kernels
* disable broken kernel instance
* example working
add non-permuted problem statement
evaluating whether overhead comes from permutation or the extra kernel arg
* interface for bias addition without implementing it
* test and profiler running
* tidy
* mask type determined by enum class
* unify example code
* move masking specialization to its own header
* align formats
* extract helper functions
* experiment merging dims for attn w/ permute; shows perf parity with attn wo/ permute
* add tensor specialization to template args
since tensor spec packed shows perf parity when permutation isn't needed
remove redundant template args
comment on 'packed' tensor specialization
* grouped attention with input/output permute example
* format
* clean up
* refactor acc0 tile visitor
Co-authored-by: shaojiewang <wsjmessi@163.com>
Co-authored-by: Chao Liu <chao.liu2@amd.com>
* add fused addition lyernorm
* add fused addition lyernorm
* changed CMakelist
* removed annotates
* modified descriptor of C
* fixed bug in gridwise add layernorm
* format the files
* modified name from add&layernorm into elementwise&layernorm
* created fused elementwise layernorm branch
* change input into tuple type
* add sweep once to reduce load & read of C from global memory
* modified Argument api
* modified way to malloc c in global memory
* changed gamma and beta to m_k_desc
* fixed bug when sweep once and move CDataType when define device level struct
* add src dim for gamma and beta
* implement optimization for coalesced
* delete a annotation line
* fixed some bug to meet the requirements of ck
* add bandwidth computing in example, and fixed the time unit
* move device_elementwise_layernorm_impl.hpp into device/impl
* fixed bug in device_elementwise_layernorm_impl.hpp
* changed name from layernorm into normalization
* clang-format the changed files
* changed the names
* moved immidiate results into lds, it become faster in non-sweeponce cases
* changed naming of C into X to make the defination more clear
* changed naming in example
* add tests for elementwise normalization
* move example_elementwise_layernorm_blockwise into folder 44_elementwise_normalization
* move test_elementwise_layernorm_fp16 into new folder
* move elementwise_normalization_instances into a new folder
* add more tests in test_elementwise_layernorm_fp16.cpp
* added some corner cases in test
* fixed method to compute lds size for matrix X
* changed name of 44_elementwise_normalization into 45_elementwise_normalization
* modified some comments
* modified some other confused comments
* reduce redundant tests in test_elementwise_layernorm_fp16.cpp
