* enable batched_gemm_softmax_gemm_perm_wmma for gfx12
* disable instances with blocksize=256 in attention examples
* debuggging
* debug
* fixed lds_enabled
* debugging
* Fix and add limit to skiplds feature
* Enable skipLds feature and fix compilation bugs
* add ck_tile definitions for gfx12
* fix clang format and test/wmma_op
* updage instances cmake for gfx12
* disable the test_wmma_op on gfx12
* fix the builds for gfx950
* add gfx12 and gfx950 to default target list
* clean-up cmake file
* Initial introduction of OFP8 data types.
* Renamed FP8 and BF8 tests into FP8_FNUZ and BF8_FNUZ.
* Implementation of ConvertFP32Nearest in test_fp8_ocp.
* Remove dependence on possibly undeclared alias.
* Implement FP8OCP test for stochastic rounding mode.
* Implement FP8OCP tests for half_t type conversions.
* enable bf16 atomic add on gfx950
* Implement ConvertFP32Nearest test.
* Implement ConvertFP32Stochastic test.
* Implement ConvertFP16Nearest and ConvertFP16Stochastic tests.
* Refactoring. Move FP8 definitions into a separate header file.
* Enable easy switching between architectures.
* Fix compilation error for gfx942 architecture.
* Add fp4 type with constants
* only builf gfx950 branch for gfx950 target by default
* Enable OCP build of example_gemm_xdl_fp8.
* Fix formatting.
* fix the build logic for gfx950
* Improve GEMM example verbosity.
* Add constexpr where applicable.
* fix the logic of enabling XDL and WMMA instances
* Improve GEMM example verbosity.
* Enable build of example_gemm_xdl_fp8_bf8 test.
* Fix tests for gfx1101 architecture.
* Build DPP examples only on gfx103 and gfx11 architectures.
* Optionaly run either CPU or GPU verifications with GEMM examples.
* Extend GeneratorTensor_Sequential to produce values of prescribed data types.
* Add missing constructor.
* Add scale type and mxfp conversions
* Update conversions
* Add conversion tests
* Fix typo
* Improve infrastructure for OFP8 data type support.
* BUGFIX. Should not use FP8 as Compute/Accum data type.
* Add custom target for grouped_convnd_bwd_weight tests.
* Can build `tests` target on gfx950.
* Bugfixes on gfx1101 architecture.
* Fix dependencies.
* Add stochastic rounding tests
* Provide single point of truth for FP8 INF and NAN checks
* Prevent instantiation of operators that are not supported by FP8 data types
* Add FP8 type selection into client_axample CMakeLists.txt
* Prevent sccache server from shutting down during build
* Fix test success reporting logic
* Change default verification method to CPU.
GPU verification takes too much time to complete on the emulator.
* Add scale <-> float conversions
* Add scaled conversions with tests
* Add device conversions
* Make sure all tests and examples are built for gfx950
* Facilitate testing of FP8 data types on the emulator
* Introduce two new tensor generators
* Enable instances built for gfx94 to be built on gfx950
* Verify 35_splitk_gemm on floating point numbers.
splitk gemm appears to be losing precision VS reference implementation when FP numbers are involved.
* Format
* Verify 04_gemm_add_add_fastgelu on floating point numbers
* Verify 20_grouped_conv_bwd_weight on floating point numbers
* Verify 38_grouped_conv_bwd_data_multiple_d on floating point numbers
* Verify more tests on floating point data
* Fix data types and improve testing verbocity.
* Add fp4 vectors
* Add debug tests
* Upgrade to NPI 573 build docker.
* Skip on gemm_universal tests.
The tests take too long to complete on the emulator.
Need to see if it is possible to reduce the scope of the testing to just FP8 data types.
* Add new mfma instructions and examples
* Add preprocessor directives for gfx950 specific code
* Fix gfx1101 build
* Document test availability
* Re-enable fp8 gemms for gfx94/95
* Cherry-pick GEMM Universal tests for FP8 data types
* Cleanup
* Add vector types and tests
* Add check_err function
* Add tensor generators
* CK_USE_GFX94 has already been set on this branch
* Fix
* Address formatting issues and leftovers
* Make fail/pass logic consistent within 01_gemm folder
Removed multiple negations in fail/pass logic to propagate `true` as the success indicator.
* Fix GPU verification reporting logic.
* Update year in copyright notice.
* Cleanup
* Use `enum class` instead of `enum`
* Remove set_property for FP8 tests
* Add vector conversions
* Fix
* Fix linker errror
* Clean up
* Fix gfx950 conversions
* Clean up
* Fix more gfx950 conversions
* Fix even more gfx950 conversions
* Narrowing the scope of PR to OCP FP8 enablement only
* Add tests for OCP FP8 vector_type storage
* Fix client examples build
* Fix typo
* Update e8m0 casting
* Rename E8M0 type
* Update unpack method
* Cleanup merge artifacts
* Enable gemm kernel on all gfx9 architectures (#227)
* clean-up
* Implement `non_native_vector_base` with `ext_vector_type` array. (#232)
* Enable support of 1, 2, 4, and 8-byte custom types in CK.
* Fix pool tests for OCP FP8 data type
* Fix build
* Add ckProfiler gemm instances for new mfma instructions and fix ckProfiler build on gfx950
* fix clang format
* Add new mfma instructions and examples
* Add preprocessor directives for gfx950 specific code
* Add ckProfiler gemm instances for new mfma instructions and fix ckProfiler build on gfx950
* fix clang format
* Fix clang format for the newly merged files
* Use the existing example instances for fp16 bf16 and int8
* Remove comment on new mfma instructions in MfmaInstr
* Update include/ck/tensor_operation/gpu/grid/gridwise_batched_gemm_gemm_xdl_cshuffle_v1.hpp
Co-authored-by: Andriy Roshchenko <107577548+andriy-ca@users.noreply.github.com>
* merge from public repo
* Fix ck build
* Fix ck build
* Use double for max_abs_in_val
* Move scaled_type_convert functions to a separate header (#251)
* re-enable building mha lib and gemm_universal_f8 instances for gfx950
* Update library/src/tensor_operation_instance/gpu/CMakeLists.txt
Co-authored-by: Andriy Roshchenko <107577548+andriy-ca@users.noreply.github.com>
* fix typo for CK_USE_OCP_FP8
* fix typo for CK_USE_OCP_FP8
* Add FP6 and BF6 types (#261)
* Add a rounding flag
* Add FP6 and BF6
* Add tests
Co-authored-by: Andriy Roshchenko <107577548+andriy-ca@users.noreply.github.com>
* Clean up
---------
Co-authored-by: Andriy Roshchenko <107577548+andriy-ca@users.noreply.github.com>
* fix one more typo
* Refactor E8M0 scale implementation (#262)
* Refactor E8M0 scale implementation
* Add MXFP6 and MXBF6 conversion methods (#270)
* Add conversions
* Add tests
* Add docstrings
* Add scaled conversions
* Add fp6/bf6 tests
* Remove misleading fp4 test case
* Add docstrings
* Clean up
* Address comments
* Set stricter tolerances for RNE tests
* Add missing tests
* Add native conversions to float
* Revert "Add native conversions to float"
This reverts commit 09467111f73b753c8cc3d597533b187940353dab.
* Update copyright years
* replace the fp6 with bf6 convert calls in test_bf6
* fix test_bf6
* enable smfmac test
* [MX FP8] Add Scaled Type Convert Functions for OCP FP8/BF8 data types (#271)
* Move scaled_type_convert functions to a separate header
* Introduce MX data tests
* Build MX tests only on relevant architectures
* Refactor E8M0 scale implementation
* Fix `config.h` typo
* Cleanup deprecated symbols
* Refactor `amd_ck_fp8.hpp`
* `scaled_type_convert` for `f8_ocp_t`
* Implement test for MX FP8 scaled type convert
* Implement test for MX BF8 scaled type convert
* Scaled type convert for vectors of 2 FP8 elements
* Scaled type convert for vectors of 16 FP8 elements
* Implementation of scaled conversion from F32 to F8
* Add tests for scaled conversions from FP32 to FP8
* Add documentation to the test functions
* Implementation of scaled conversion from F32x2 to F8x2
* Implementation of scaled conversion from F32x16 to F8x16
* Implementation of scaled conversion from F32x32 to F8x32
* Implementation of scaled conversion from F8x32 to F32x32
* Verified on the emulator
* MX FP GEMM - Example Template (#277)
Temporarily uses `DeviceGemmMultiD_ABScale_Xdl_CShuffle_V3` kernel and 128x128 scaling matrices.
Must be modified to use MX-native GEMM kernell with 16 or 32 component vectors per scale.
Verified on the emulator.
* Add vector support
* Add tests
* Add missing type aliases
* Fix test naming
* only build mx example for gfx950
* disable CK_USE_AMD_MFMA_GFX950 by default
* fic build for multiple archs
* fix typo
* fix typo
* Update unpack signature
* Fix merge
* Add size checks in pack function
* Add a flag
* Add conversions
* Fix build logic
* Update pack/unpack methods
* Remove unneeded AsType accessors
* Add docstrings
* Add a flag to config file
* Test the functionality of V_MFMA_F32_16X16X128_F8F6F4 and V_MFMA_F32_32X32X64_F8F6F4 instructions. (#293)
* Introduced MFMA tests
* Verified f8f6f4 MFMA Instructions
* Move flag logic to scaled_type_convert header
* Use pointers instead of array indices
* Fix a typo
* Update tests and pack functions
* Fix gemm gemm on gfx950
* Fix clang format
* restore the default gput target lists
* fix the jenkinsfile
* add missing ifdef
---------
Co-authored-by: Jing Zhang <jizhan@amd.com>
Co-authored-by: aska-0096 <haocwang@amd.com>
Co-authored-by: Jun Liu <Liu.Jun@amd.com>
Co-authored-by: Andriy Roshchenko <andriy.roshchenko@amd.com>
Co-authored-by: Rostyslav Geyyer <rosty.geyyer@amd.com>
Co-authored-by: Rostyslav Geyyer <46627076+geyyer@users.noreply.github.com>
Co-authored-by: root <root@banff-cyxtera-s83-2.ctr.dcgpu>
Co-authored-by: Andriy Roshchenko <107577548+andriy-ca@users.noreply.github.com>
Co-authored-by: jefyang1 <146495389+jefyang1@users.noreply.github.com>
Co-authored-by: jefyang1 <Jeffreyj.Yang@amd.com>
* enable int4 scale (weight only) kernel
* format some files
* Add unit test for int4 weight only
* fixed and formatted code
* fixed
* formated
* formated
* fixed
* fixed a bug in the ckProfiler, and formatted the code
---------
Co-authored-by: mtgu0705 <mtgu@amd.com>
* add bf16 gemms for gfx11/gfx12
* reduce the input values in test_gemm
* add int8 wmma gemm instances for gfx11/gfx12
* add example gemm_wmma_int8
* fix bug in gemm_wmma_int8 test
* increase bf16 gemm test tolerance
* update the dates and clean-up commented-out instances
* universal streamk with atomics with ckprofiler support. grid_size and streamk strategy are tunable. grid_size of -1 leads to #WGs = maximum occupancy X num_CUs. implementation supports many different streamk policies: 1-tile, 2-tile, 3-tile and 4-tile. streamk strategy of -1 leads to default streamk policy (4-tile).
* Update README.md
* fixing clang-format issues
* removed conflicts in struct members between streamk and universal streamk
* corrected arg parsing for streamk and universal streamk
* added stream-k policies for 3 tile and 4 tile
* fixed argument type issue with parsing cmd args
* changes suggested in PR review are made- removing comments and correcting copyright
* file permissions updated
* added default value support for grid_size and streamk-policy selection set to -1
* print messages for arguments
* print messages for arguments
* print messages for arguments1
* Add bf16 instances
* Add bf16 gemm universal example
* tempsave
* Add guard to navi compilation
* workground on a specific mixed gemm instance ( bring back it when compiler fix upload)
* fix formatting condition statement issue
* solve conflict
---------
Co-authored-by: Jun Liu <Liu.Jun@amd.com>
* parse examples inside the add_example_executable function
* fix the example 64 cmake file
* add xdl flag to the gemm_bias_softmax_gemm_permute example
* add filtering of tests based on architecture type
* enable test_grouped_gemm for gfx9 only
* enable test_transpose only for gfx9
* only linnk test_transpose if it gets built
* split the gemm instances by architectures
* split gemm_bilinear,grouped_conv_bwd_weight instances by targets
* split instances by architecture
* split grouped_conv instances by architecture
* fix clang format
* fix the if-else logic in group_conv headers
* small fix for grouped convolution instances
* fix the grouped conv bwd weight dl instances
* fix client examples
* only enable client examples 3 and 4 on gfx9
* set the gfx9 macro
* make sure the architecture macros are set by cmake
* use separate set of xdl/wmma flags for host code
* sinmplify the main cmake file
* add conv_fwd_bf8 instance declaration
* Add basic support for direct loads from global to LDS
* Clean the code and comments
* Add support for fp16
* Add comments
* Add check for thread cluster lengths
* Align non-direct-load fp16 example
* Small fixes
* Extend IsSupported to check for supported GPU gens
* Build examples only on the supported HW
* Do not throw when instance not supported in 04 example
* Review: Apply review suggestions
* Review: small fix
* Review: small fix
* workaround nan problem by changing output to fp16
* enable f8/bf8 gemm tests on MI200
* workaround f16 to f8 conversion
---------
Co-authored-by: Jing Zhang <jizha@amd.com>
* refactor cmake files for the tests
* refactor cmake files for examples
* fix cmake for gemm example
* fix the cmake file for all examples
* add splitting by data types in gemm_splitk instance header
* rename test to reflect only dl instances are used
* clean up CI workspace, update cmake for instances
* change the jenkinsfile syntax
* build all instances except DL on gfx11
* move workspace cleanup after stages
* clean up workspace after every stage
* isolate data types in grouped_conv_fwd header
* isolate dl instances for grouped_conv2d_fwd
* fix syntax
* fix cmake and batchnorm instances
* fix typo
* fix reduction instances
* fix grouped_conv headers
* fix syntax
* replace parsing logic for instances, replace bfp16 with bf16
* fix the client examples build
* clean up DTYPES from instances cmake files
* update the parsing logic in cmake files
* make an exception for reduction kernels
* update few remaining cmake files to handle DTYPES
* fix syntax
* fix cmake conflicts
* replace f8 with fp8 test name
* resolve conflicts for dpp instances
* Redesign the DPP8 GEMM kernel to use warp-wise component
* Review: Improve error messages
* Review: Remove unnecessary empty lines
* Review: Fix M, N per thread names
* Review: Rename mfma_input_type to dpp_input_type
* Review: Fix tensor adaptor; remove unnecessary element
* Review: Remove calls to dpp_gemm's MakeCDescriptor
* Review: Add blockwise doc, change function names to include dimension names
* Review: Remove duplicated code; Move Block2CtileMap alias to the top of the file
* Review: Add __restrict__ keywords
* Review: Use MatrixPadder for padding A, B, C matrices
* Review: Remove hardcoded datatypes
* Review: Change names from FloatX to XDataType
* Review: Introduce AK0 and BK0 instead of a single K0
* Review: Remove construction of dpp_datatypes object
* Review: Rename DppInstrRunner to DppLanegroupGemm
* properly split conv_nd_bwd_data instances
* split conv2d_fwd instance data types
* split the gemm, conv2d_fwd and batched_gemm_softamx_gemm
* split the tests by data types where possible
* filter examples by DTYPES
* split few remaining examples by DTYPES
* filter most instances by DTYPES
* add new lines at end of headers, fix grouped_gemm profiler
* fix syntax
* split the ckprofiler instances by DTYPES
* split the conv2d and quantization DL and XDL instances
* fix the splitting of conv2d DL instances
* split softmax and pool_fwd tests for fp16 and fp32 types
* fix syntax
* fix the dl_int8 quantization instances isolation
* initial stream-k implementation with example
* fix unexpected change in err
* improve a little bit performance by reorganize pipeline.
* improve perf a little bit by swizzle block idx
* add profiler
* update example
* fix spelling
* shrink karg for streamk
* support dynamic buffer using memory coherence glc_slc bit from template
* control memory coherence while construct dynamic buffer
* update reduction for streamk(not ready yet)
* Add template parameter to make_dynamic_buffer to support amd_buffer coherence setting
* fix build issue
* fix several bug
* now result is correct, everything works (but has scratch)
* remove scratch by manually reset coordinate
* update device code
* fix a bug in final reduce
* fix something in example
* update async memset
* fix enum as camel case
* modify coherence enum name
* clean code and use atomic streamk by default
* remove unused var
* throw exception if have empty pointer
* fix format
* fix CI warning
* fix type in init
* modify CI error
* filter out on gfx10+
* restore changed example code
---------
Co-authored-by: Qianfeng Zhang <Qianfeng.Zhang@amd.com>
* allow building CK for specific data types
* add CI build and test stage on Naiv3x without some int8 instances
* add missing gemm fp16 instances
* add the changes to the missed cmake file
* add empty lines at end of source files
* Do not build quantization client example on navi3 in CI
* disable batched_gemm_multi_d_int8 instances with DTYPES
* disable device_conv2d_bwd_data_instance with DTYPES
* fix ckprofiler for conv_bwd_data for int8
* properly isolate the conv_bwd_data int8 instances
* remove empty line
* wmma_op + unit test
* add arch limitation to wmma test
* change arch limitation
* Refactor + Add all type unit test(int4 compile failed)
* Add f32_16x16x16_bf16 unit test
* tempsave
* tempsave
* tempsave
* runtime bug, cannot find symbol
* workaround for incorrect HIP warpSize return value
* debugging
* tempsave
* Correctness OK, waiting for optimization
* Tidy up + format
* temp save
* temp save, reproduce the v_bfi_b32 issue
* add inline asm for wmmaop test
* tidy up
* clean some debug purpose code
* discard some codes
* clang format
* clang format
* compiler issue fixed + increase tile size
* navi3x_multipleD+example
* temp save
* workable
* batchedgemm[OK], groupconv[debug]
* groupconv: Sanity check[OK], Performance[Bad]
* navi3x_groupconv_need_optimization
* format
* Add arch limitation to all wmma examples
* fix bug: example30 input conv args
* wmma_op + unit test
* add arch limitation to wmma test
* change arch limitation
* Refactor + Add all type unit test(int4 compile failed)
* Add f32_16x16x16_bf16 unit test
* tempsave
* tempsave
* tempsave
* runtime bug, cannot find symbol
* workaround for incorrect HIP warpSize return value
* debugging
* tempsave
* Correctness OK, waiting for optimization
* Tidy up + format
* temp save
* temp save, reproduce the v_bfi_b32 issue
* add inline asm for wmmaop test
* tidy up
* clean some debug purpose code
* discard some codes
* clang format
* clang format
* compiler issue fixed + increase tile size
* Add GEMM examples for int4
Currently the source files are just copied from int8 examples
* Re-use pre-defined alias in int4 exmples
* Distinguish user-side type from kernel-side type
* Add int4_t support for check_err()
* Allow conversion between Tensor<> specializations
* Re-format source files
* Use different type for host tensors
* Re-use CopyAsType<>() to implement copy ctor
* Re-use element-wise operation type alias
* Fix typo in alias names
* Complete the int4 examples
* Add constraint to Tensor<> templated methods
* Add type traits 'is_signed_integral<>'
* Add type constraints for integer version check_err<>()
* Allow comparing different-sized integral types in check_err()
* Check converted Tensor<int4_t> with golden Tensor<int8_t>
* Remove constraint of Tensor<>::CopyAsType()
* Avoid compilation error while disabling ck::int4_t support
* Remove debug messages
* Add #error directive to prevent compile sources with wrong setting
* Simplify tensor usages in examples
* Add constraint to check_err() input reference type
* Align design with other PR
* Use ""_uz to simplify example code
* Avoid too much generalizing check_err()
* Re-format GEMM instance template arguments
* Extract int4 example common codes
* Sort include directives
* Move #include directives into new header
* Move common codes together
* Re-format template argument in example code
* Reuse same implementation code for most of GEMM examples
* Re-format common.hpp
* Unify structured comment in examples
* Use reinterpret_cast<>() for cross-type pointer conversion
* Revert "Add type traits 'is_signed_integral<>'"
This reverts commit f2c148efae.
* Allow unsigned integer arguments for check_err()
* Fix compilation error in check_err()
* Remove unnecessary copy ctor for Tensor<>
* Mark Tensor<> special member functions as 'default'
* Use more strict condition to add code in examples
* Fix wrong program return value of GEMM examples
* Handle the case while user specify all the strides
* Fix never-ran examples
* Exit successfully if GEMM instance does not support given problem
* Add missing 'else' keyword
* Re-format CMakeLists.txt
* Add wrapper function to hide value conversion while copying memory
* Add new DeviceMem API to copy memory
* Use new DeviceMem API to implement examples
* Revert "Add new DeviceMem API to copy memory"
This reverts commit 3f190b0779.
* Add conversion ctor for Tensor<>
* Write Tensor<> conversion logics explicitly in example code
* Convert Tensor<> values after transfer data to host
* add intrin_mfma_f64_16x16x4f64
* add example
* gemm reference add double data type
* chang init data
* fix M N PerXdlops
* fix ifdef
* add comparsion config
* add conv fwd example
* format log out
* change rc matrix egister layout
* reorganize example
* reorganize example 2
* format,because merge develop
* fix call impl adding acc data type
* lost ;
* add compiler warning
* change example tunning parameters
* add test for fp64
* add instance
* add test/gemm/gemm_fp64.cpp
* fix get name issue
* remove some tunning parameter
* fix conflict
* format
* use integer value for GEMM test
* add acc data type
* remove typeid because fp16
* fix streamconfig etc bug from merging develop
* format
* remove test_gemm_xdl_fp64
* add AccDataType
* AccDataType problem
Co-authored-by: qinletao <letaoqin@amd.com>
Co-authored-by: Chao Liu <chao.liu2@amd.com>
* start adding navi21 GEMM
* navi_gemm_km_kn_mn_fp32 compiles and passes one test.
* rename variables and functions in gridwise_gemm_dlops_v1r3
* add other 3 layouts; format instance
* adding more tuning parameters
add tuning parameters for other 3 layouts
* add gemm_dlops_f16
* tmp
* add dependence of DeviceGemm::IsSupportedArg() on arch
* minor changes
* minor changes
* minor changes
* minor changes
* minor changes
* minor changes
* minor changes
* push gemm_dlops into profiler
* minor changes
* if using xdl or dlops is moved into profiler_gemm_impl
* minor changes
* minor changes
* remove is_xdl from profile_gemm_impl
* make IsSupportedArg dependent on arch for other device_gemm
* minor changes
* minor changes
* fix a bug in f_generate_tensor_value
* add 64x64x64 for gemm_dlops_int8
* add 64x64x64 for gemm_dlops_int8
* comment out 3 layouts in gemm_dlops_int8; add 32x32x32 for gemm_dlops_int8; init A values to 1
* fix
* start fixing tuning parameters
* monir
* minor changes
* minor changes
* minor changes
* fixing
* adding example
* adding example
* adding example
* add gemm fp32 example
* clean up
* use 128x128x16 as MNK tile in navi21 gemm example
* bug fix
* fix test
* use new block c tile
* clean
* fix build
Co-authored-by: Chao Liu <chao.liu2@amd.com>
Co-authored-by: shaojiewang <wsjmessi@163.com>
