* Revert "Revert "feature:tf32:add initial conv3d fwd kernel support (#2763)" (#2848)"
This reverts commit 03b59f8c76.
* fix compile error on gf12x
* only run tf32 example on gfx942
* only build tf32 instance on gfx942
* ckProfiler:only support tf32 in gfx942
* delete unuseful messages
* Create new copies of existing device struct and gridwise struct for batched_gemm_softmax_gemm and disable the softmax part. Still based on old wmma pipelines. Also copy the example and remove the softmax part from the reference calculation. Works and results match reference except for tiny float errors in problem 2.
* Turn DeviceBatchedGemmGemm_Wmma_CShuffleV3 into a proper DeviceBatchedGemmGemm derived class, with the right argument and invoker functions. Update example to use new definitions.
* Remove unused cross-attention and self-attention kernels, arguments, and invokers. Also remove other unused Argument types.
* Remove masking related code, test unusual sizes in example.
* Remove remaining softmax related code from GridwiseBatchedGemmGemm_wmma_cshuffle_v3 and example.
* Remove code related to numDims, bias, and TensorSpec from Device struct and example.
* Add layout template parameters to device struct
* Move (NPerBlock, LTilePerBlock) device struct template arguments up by two places to match XDL template argument ordering.
* Merge accumulation data types into one type to match XDL device struct.
* Remove NPerWmma template parameter from device struct and just set it equal to LPerWmma. Now device struct template params exactly match those for XDL batched gemm gemm.
* Add support for RCCR layout and test this in example
* Add batched_gemm_gemm_wmma to instance library + profiler, and add gtest just like for xdl.
* Add RCCR instance and additional RCRR instance to library.
* Remove unused permute and alpha related code. Time all tests. Fix B1 strides in argument verification.
* Remove references to G0, G1 in favor of batch, reduce dimensionality of length and stride arrays.
* Managed to replace old wmma gridwise pipeline and blockwise struct with new wmma blockwise pipeline. Some cleanup required but all tests pass.
* Make TransposeC a proper template parameter that gets passed all the way from BlockGemmPipeline_Selector to WmmaGemm so we can use the correct settings for bacthed gemm gemm as well as regular gemm. Gemm universal tests now pass again.
* Replace old LoopSched and PipelineVer params with BlockwiseGemm pipeline equivalents, and use these in instance factory. The v3 pipeline does not work yet, but v1 works for intrawave and interwave.
* Adapt the A wave descriptor to deal with RDNA4 wmma. This fixes batched gemm gemm functionality on RDNA4.
* Fixed two aspects of the v3 pipeline that were incorrect: First of all the blockwise copy operator was invoked once too many in all cases (RunRead and move window), which broke batched gemm gemm when the blockwise pipeline was used multiple times. Furthermore we should be using the mainloop (hotloop) for num_k_loop >=2 instead of num_k_loop >=3. Now we can use support any K dimension.
* Remove num prefetch parameter from gridwise struct since we don't use it and it doesn't do anything,
* Remove unused non-lds paths.
* Test and update the IsSupportedArgument() and CheckValidity() functions for all layouts + padding modes and various problem sizes.
* Add a lot of instances to the profiler with various blocksizes and pipelines, all verified.
* Add support for BF16: instance library, tests, and examples.
* Add examples for int8 and fp8, had to add type_convert_sp template specializations for the latter.
* Template the library instance lists and add default padding instances.
* Move memory calculations from the kernel to the Argument contructor. Also actually parse and use the user-provided batch strides.
* Actually parse and use user-provided regular strides.
* More refactor: remove references to multiple dims per dims, and g0 / g1. Also move xdl specific test utils out of generic test util header.
* Small post-rebase-on-develop fix due to bscale-related pipeline changes. All tests rerun + tested bscale and regular gemm.
* Introduce the correct GetCThreadDescriptor function in the blockwise gemm pipelines for the TransposeC=true case. It turns out to be identical for our batched gemm gemm (gemm0) usecases, but could theoretically be different for wmma_gemm instances with smaller-than-4-byte output data size.
* Remove unused NumPrefetch template parameter, we don't need to match the XDL template params one-to-one.
* Implement proper TailNum and HasMainLoop template parameters for the v3 pipeline. Now the Run() function knows at compile time whether there are 1, 2, or more loops in total, and adds or removes sections accordingly. It still uses the blockwise copy operators the correct amount of times.
* Add print lambda with env check and file and func to device and gridwise level compatibility error messages. Also respect compatibility in example script.
* RDNA3 does not support fp8
Update Blockwise and Gridwise files to support both wave32 & wave64.
1. Calculate WaveSize from template parameter, instead of hard code it to 64, some "64" is also replace with WaveSize
2. Move BN0Shuffled and BK0Shuffled to device side. we can't get correct mfma inst info in host side.
3. Update b_thread_offset_n and b_thread_offset_k in gridwise_gemm_xdl_cshuffle_v3_b_scale.hpp for gfx11. in gfx11, input data is duplicated for each 16 threads, it is different with all of others.
4. Modify a1_threadwise_copy in gridwise_batched_*gemm*gemm for gfx11. for gfx11, we need duplicate input and swizzle A if transposeC isn't enabled.
* add template for fp16 atomic add
* add template for unsigned short atomic add
* use atomicCAS in atomic add for fp16 and unsigned short
* revrt back to atomic add using casting
* Fix amd_ck_fp8.hpp macro definitions
1. Define CK_USE_FNUZ_FP8 and CK_USE_OCP_FP8 definitions only if they were not defined before.
2. Prefix __assert_fnuz_support and __assert_ocp_support with namespace
fp8_impl to avoid redefined error when building with rocm 6.4+
(rocm/6.4.0/include/hip/amd_detail/amd_hip_fp8.h)
Co-authored-by: Andriy Roshchenko <andriy.roshchenko@amd.com>
* Shard several of the most costly targets.
Introduces a filter_tuple_by_modulo to break up tuples.
Drops build time of target from 21 minutes to under 14 minutes with 64
build processes, or 11 minutes with 128 build processes.
time ninja -j 64 device_grouped_conv3d_fwd_instance
* fix clang format
* Fix build errors in instantiation code.
I wasn't sure how to test the header-only instantiation code on my
initial commit. From Jenkins CI test results, I see that there is a
test target that depends on these headers:
ninja -j 128 test_grouped_convnd_fwd
This allowed me to test the build locally. I found three mistakes I
made, mostly related to early experiments on I tried on the code.
This was hard to find earlier because this PR is really too large.
I also discovered that there are five 2D convolution targets that now
dominate the compilation time. I will likely address those in a later
PR, rather than adding even more changes to this PR.
* Fix link errors from mismatched declarations.
Our pattern for instantiating MIOpen templates uses duplicate
declarations (instead of headers). This is fragile, and I didn't
notice that my last commit had a bunch of link errors. I fixed these
mistakes, and the bin/test_grouped_conv_fwd test target binary now links
correctly.
* Migrate the design to a code-generation approach.
Use a CMake function with template files to generate the source files for the
intantiating the kerenels and to generate the calling function.
* Shard the longest 2D convolution builds
Now that we have automated the shard instantiation, we can shard the 2D
convolution targets that take the longest to build. The target
test_grouped_conv2d_fwd now compiles in 15 minutes.
* Use PROJECT_SOURCE_DIR for submodule compatibility
I used CMAKE_SOURCE_DIR to refer to the top-level source directory in
the ShardInstantiation.cmake file, but this can cause issues with
git submodules. Instead, we should use PROJECT_SOURCE_DIR to ensure
compatibility when this project is used as a submodule in another
project.
* Migrate the design to a code-generation approach.
Use a CMake function with template files to generate the source files for the
intantiating the kerenels and to generate the calling function.
* Migrate the design to a code-generation approach.
Use a CMake function with template files to generate the source files for the
intantiating the kerenels and to generate the calling function.
* Remove accidental copy of a file
* Remove accidental copies of template files.
---------
Co-authored-by: illsilin <Illia.Silin@amd.com>
* Do not use warpSize as compile time constant as it is removed
* Update tile_image_to_column_shape.hpp
update warpSize usage.
* clean-up all use of warpSize, make sure code builds
* fix
---------
Co-authored-by: Illia Silin <98187287+illsilin@users.noreply.github.com>
Co-authored-by: illsilin <Illia.Silin@amd.com>
Co-authored-by: Bartlomiej Kocot <barkocot@amd.com>
* Shard several of the most costly targets.
Introduces a filter_tuple_by_modulo to break up tuples.
Drops build time of target from 21 minutes to under 14 minutes with 64
build processes, or 11 minutes with 128 build processes.
time ninja -j 64 device_grouped_conv3d_fwd_instance
* fix clang format
* Fix build errors in instantiation code.
I wasn't sure how to test the header-only instantiation code on my
initial commit. From Jenkins CI test results, I see that there is a
test target that depends on these headers:
ninja -j 128 test_grouped_convnd_fwd
This allowed me to test the build locally. I found three mistakes I
made, mostly related to early experiments on I tried on the code.
This was hard to find earlier because this PR is really too large.
I also discovered that there are five 2D convolution targets that now
dominate the compilation time. I will likely address those in a later
PR, rather than adding even more changes to this PR.
* Fix link errors from mismatched declarations.
Our pattern for instantiating MIOpen templates uses duplicate
declarations (instead of headers). This is fragile, and I didn't
notice that my last commit had a bunch of link errors. I fixed these
mistakes, and the bin/test_grouped_conv_fwd test target binary now links
correctly.
* Migrate the design to a code-generation approach.
Use a CMake function with template files to generate the source files for the
intantiating the kerenels and to generate the calling function.
* Shard the longest 2D convolution builds
Now that we have automated the shard instantiation, we can shard the 2D
convolution targets that take the longest to build. The target
test_grouped_conv2d_fwd now compiles in 15 minutes.
* Use PROJECT_SOURCE_DIR for submodule compatibility
I used CMAKE_SOURCE_DIR to refer to the top-level source directory in
the ShardInstantiation.cmake file, but this can cause issues with
git submodules. Instead, we should use PROJECT_SOURCE_DIR to ensure
compatibility when this project is used as a submodule in another
project.
---------
Co-authored-by: illsilin <Illia.Silin@amd.com>
* SWDEV-535598 - remove usage of 'warpSize' variable as it has been deprecated. Ideally get_warp_size() should not be constexpr but this is just a workaround
* SWDEV-535598 - remove comment from get_warp_size as constexpr is required for this repo
---------
Co-authored-by: Gerardo Hernandez <gerardo.hernandez@amd.com>
* Fixed cmake errors related to gemm_bilinear. Previously, if the above flags are set, cmake build fails: GPU_TARGETS="gfx1100;gfx1201" -D DTYPES="fp16;bf16;fp8"
* Fixed cmake build errors related to test_fp8
* Updates to support mixed precision
* Adding support for RRR, F8xF16xF16 gemm_universal_wmma - wip
* Added support for F8xF16xF16 to gemm_wmma_universal
* Added support for F16xF8xF16 to gemm_wmma_universal
* Added support for BF16xI4xBF16 to gemm_wmma_universal
* Added support for F16xI4xF16 to gemm_wmma_universal
* Fixed IsSupportedArgument to check ComputeTypeA, ComputeTypeB instead of ADataType, BDataType
* Added missing test class for FP16_KM_NK
* Pre-commit hooks fixes
* Added padding instances for f16xf16xf16
* Fixed cmake errors related to gemm_bilinear. Previously, if the above flags are set, cmake build fails: GPU_TARGETS="gfx1100;gfx1201" -D DTYPES="fp16;bf16;fp8"
* Fixed cmake build errors related to test_fp8
* Ammending changes for adding support for padding instances for f16xf16xf16
* Fixes for padding instances for f16xf16xf16
* Added padding instances for bf16xbf16, f8xf8
* Added packed instances for bf16xi4xbf16
* Added padding instances for f8xf16xf16
* Added padding instances for f16xf8xf16, f16xi4xf16
* Fixed typos for bf16xbf16xbf16 padding instances
* Fixed typos for padded instances
* Added tests for fp16, KM_KN and KM_NK
* Padding not supported for when BDataType is pk_i4_t. Added fix for correct check and removed padding instances.
* Fixed typos
* Updated the set of tests for FP16
* Updated the set of tests for FP16
* Fix typo
* Moved f16xi4 test under the correct data layout group
* example for gemm_universal_bf16
* Adding examples for gemm_wmma instances
* Added the missing parameters
* Fixed review comments and added executable to cmakeLists
* Fixing clang format
* Fixing build erros
* Fixed compilation failure.
* Modified some code as per gemm_universal_examples
* Fixed the gemm specialization error
* Fixed the build errors.
* Fix strides of a/b_thread_desc
The descriptors are larger than needed (even though the compiler don't alloc registers for unused values).
* Load in M/NRepeat dims with thread copy's slice instead of a loop
* Clone BlockwiseGemmXdlops_pipeline_v1 for WMMA implementation
* Implement Intrawave and Interwave variants of pipeline v1
* Add instances for Interwave and Intrawave v1
* Add instances with ABlockLdsExtraM and BBlockLdsExtraN = 0
* Remove instances that are too slow (mostly because of register spilling)
* Add a workaround for fp8/bf8->f32 packed conversion issue
* Add instances for Interwave and Intrawave v1
* Enable profiling of mixed precision with f8 and int4 on WMMA
* Fix segfault in profiler when B is pk_i4_t
b_device_buf's size in bytes is larger than b_k_n_permute so b_device_buf.ToDevice reads out-of-bounds.
* Remove instances that are too slow (mostly because of register spilling)
* Add missing add_device_gemm_wmma_universal_f8_f8_bf16 declarations
* Add test case for bf16_i4
* Add missing Regular tests
* Add test_gemm_universal_xdl/wmma_fp16 to REGRESSION_TESTS
They take more than 30 seconds
* Fix a bug that fp16_i4 validation passes only with PermuteB
A permutation required by conversion from pk_i4_t to half_t does not
depend on PermuteB, they can be used independently.
* Use PermuteB with f16_i4 in most instances (as xdl)
Some instances use PermuteB = false for checking correctness.
See also the previous commit.
* Fix cache flushing for pk_i4
* Add mixed precision examples
* Disable all tests and instances with f8 on gfx11
Even though f8_f16 and f16_f8 don't require f8 WMMA instructions,
gfx11 still lacks hardware instructions for fast f8->f32 conversion.
* Add FP16 KM_NK and KM_KN test suites for XDL
These tests were added to common .inc for better testing of WMMA instances
* Fix int8 DTYPES check for gemm_bilinear
---------
Co-authored-by: Anca Hamuraru <anca@streamhpc.com>
Co-authored-by: Apoorva Kalyani <apoorva@streamhpc.com>
* Add logic to use new mfma instructions for fp8 bf8
* Fix example_gemm_xdl_fp8_pk_i4_bpreshuffle_v3 on gfx950 and run clang format
* Update include/ck/tensor_operation/gpu/warp/xdlops_gemm.hpp
Co-authored-by: Andriy Roshchenko <107577548+andriy-ca@users.noreply.github.com>
* Fix intrin_mfma f8 calls due to merge mistake
---------
Co-authored-by: Andriy Roshchenko <107577548+andriy-ca@users.noreply.github.com>
* Unify test interface for different layouts.
* WIP: Introducing FP4/FP6/FP8 abstractions
* WIP: Introducing packed storage abstraction
* WIP: Introducing packed storage abstraction
* WIP: Improved support for FP6 data type
* Refactor packed storage for f6_t
* WIP: FP6 MFMA test
* Test if we correctly represent all FP6/FP4 numbers
* Additional output for failed FP4 test.
* More failing conversion tests
* Even more failing conversion tests
* Working FP6 MFMA tests
* Expand MX MFMA testing to BF8/6
* Update and verify MX MFMA test for packed types
* Fix fp4 and fp6 conversions on host
* Working MX MFMA tests for FP8/6/4
* Cleanup
* Add missing type
* Cleanup
* Final cleanup
* Restrict FP6/4 values output to CK_LOGGING=1
* Use CHAR_BIT instead of number 8
* Fix typo
* Remove FP6 and FP4 from the list of native types
---------
Co-authored-by: Rostyslav Geyyer <rosty.geyyer@amd.com>
* make the work compiled
* Solved the example code, but still have the profiler error
* Finished the feature
* Clang format and update the CHANGELOG
* solve the preshuffle v1 & v2 problem
* Comment Addressed
* Comment Addressed
* Add conversion tests
* Fix ctor
* Fix nan logic
* Fix conversion logic
* Permute packed f4_t values
* Fix conversion to float, repack vector elements
* Fix device tests
* Permute elements in a vector
* Add a repro test
* Add a conversion for a repro test
* Update test vectors
* Update conversion
* Fix the test
* Update test vector generator
* Fix vector sr conversion
* Permute conversion args
* Update conversion
* Test
* Fix packing
* Simplify conversion function
* Pack conversion in a loop
* Pack conversion in a loop
* Pack another conversion in a loop
* Pack one more conversion in a loop
* Pack the last conversion in a loop
* Clean up
* Add ops
* Add tests
* Add missing utils
* Update reference mx gemm
* Add f4x2 init mode
* Update host tensor utils
* Update chunk size for f4x2
* Add non scaled ops
* Add a type utility
* Update non scaled reference kernel
* Add non scaled tests
* Debug mfma arguments
* Add more debug info
* Update chunk size
* Update data layout
* Add more debugging
* Fix B stride
* Fix reference gemm
* Fix build
* One more reference fix
* Add more debug info
* Disable some tests
* Enable tests
* Add fp4 dimensions
* Update reference kernels
* Temp edits
* Remove leftovers
* Fix conflicts
* Clean up
* More clean up
* Revert "More clean up"
This reverts commit d8d35a0846.
* Add layouts to tests
---------
Co-authored-by: Andriy Roshchenko <107577548+andriy-ca@users.noreply.github.com>
* Add gemm_mx_fp8_bf8 example with row-major B
* Add more overloads of MX MFMA instructions
* Add MK_KN (RRR) tests
* Add KM_NK (CCR) tests
* Add more problem sizes to Large tests
* Add test_gemm_mx to the list of regression tests
* Prepare files for DeviceGemm_Wmma_CShuffleV3
* Implement main part of CShuffleV3 with block pipeline v3 for WMMA
* Remove unused functions and template params for A/B descriptors
* Support both gfx11 and gfx12
* Enable SplitK for gfx12 and disable for gfx11
* Added RowColRow layout for DeviceGemmV2 fp16
* Added more instances for Row, Col, Row data layout
* Added instances for DeviceGemm_Wmma_CShuffleV3, Col, Row, Row data layout
* Added instances for DeviceGemm_Wmma_CShuffleV3, Col, Col, Row data layout
* Added more instances for DeviceGemm_Wmma_CShuffleV3, Row, Row, Row data layout
* Fix formatting
* Add documentation
Based on e5ad48a784
* Enable gemm_universal profiling for gfx11/12
* Add WMMA intrinsics for F8/BF8
* Support F8/BF8 DeviceGemm_Wmma_CShuffleV3, add basic instances
* Add BF16 instances and tests
* Fix test_gemm_universal_wmma_fp8 by adding CK_USE_WMMA_FP8
---------
Co-authored-by: Anca Hamuraru <anca@streamhpc.com>
