#!/bin/bash
#
#  BLIS    
#  An object-based framework for developing high-performance BLAS-like
#  libraries.
#
#  Copyright (C) 2014, The University of Texas at Austin
#
#  Redistribution and use in source and binary forms, with or without
#  modification, are permitted provided that the following conditions are
#  met:
#   - Redistributions of source code must retain the above copyright
#     notice, this list of conditions and the following disclaimer.
#   - Redistributions in binary form must reproduce the above copyright
#     notice, this list of conditions and the following disclaimer in the
#     documentation and/or other materials provided with the distribution.
#   - Neither the name of The University of Texas at Austin nor the names
#     of its contributors may be used to endorse or promote products
#     derived from this software without specific prior written permission.
#
#  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
#  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
#  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
#  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
#  HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
#  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
#  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
#  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
#  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
#  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
#

print_usage()
{
	# Echo usage info.
	echo " "
	echo " ${script_name} (BLIS ${version})"
	#echo " "
	#echo " BLIS ${version}"
	echo " "
	echo " Field G. Van Zee"
	echo " "
	echo " Configure BLIS's build system for compilation using a specified"
	echo " configuration directory."
	echo " "
	echo " Usage:"
	echo " "
	echo "   ${script_name} [options] confname"
	echo " "
	echo " Arguments:"
	echo " "
	echo "   confname    The name of the sub-directory inside of the 'config'"
	echo "               directory containing the desired BLIS configuration."
	echo "               Note that confname MUST be specified; if it is not,"
	echo "               configure will complain. To build a reference"
	echo "               implementation, use the 'reference' configuration"
	echo " "
	echo " Options:"
	echo " "
	echo "   -p PREFIX   install prefix"
	echo "                 The path to which make will install buid products."
	echo "                 If not given, PREFIX defaults to \$(HOME)/blis. If"
	echo "                 the path refers to a directory that does not exist,"
	echo "                 it will be created."
	echo " "
	echo "   -q          quiet"
	echo "                 Suppress informational output. By default, configure"
	echo "                 is verbose. (NOTE: -q is not yet implemented)"
	echo " "
	echo "   -h          help"
	echo "                 Output this information."
	echo " "

	# Exit with non-zero exit status
	exit 1
}

main()
{
	# The name of the script, stripped of any preceeding path.
	script_name=${0##*/}

	# The path to the script. We need this to find the top-level directory
	# of the source distribution in the event that the user has chosen to
	# build elsewhere.
	dist_path=${0%/${script_name}}

	# The path to the directory in which we are building. We do this to
	# make explicit that we distinguish between the top-level directory
	# of the distribution and the directory in which we are building.
	cur_dirpath="."

	# The file in which the version string is kept.
	version_file="version"
	version_filepath="${dist_path}/${version_file}"

	# The name of and path to the directory named "build" in the top-level
	# directory of the source distribution.
	build_dir='build'
	build_dirpath="${dist_path}/${build_dir}"

	# The names/paths for the template config.mk.in and its instantiated
	# counterpart.
	config_mk_in='config.mk.in'
	config_mk_out='config.mk'
	config_mk_in_path="${build_dirpath}/${config_mk_in}"
	config_mk_out_path="${cur_dirpath}/${config_mk_out}"

	# Path to 'update-version-file.sh' script.
	update_version_file_sh="${build_dirpath}/update-version-file.sh"

	# Path to 'mirror-tree.sh' script.
	mirror_tree_sh="${build_dirpath}/mirror-tree.sh"

	# Path to 'gen-make-frags.sh' script and directory.
	gen_make_frags_dirpath="${build_dirpath}/gen-make-frags"
	gen_make_frags_sh="${gen_make_frags_dirpath}/gen-make-frag.sh"

	# The root directory of the BLIS framework.
	frame_dir='frame'
	frame_dirpath="${dist_path}/${frame_dir}"

	# The name of the (top-level) configuration directory.
	config_dir='config'
	config_dirpath="${dist_path}/${config_dir}"

	# The name of the directory in which object files will be kept.
	obj_dir='obj'
	obj_dirpath="${cur_dirpath}/${obj_dir}"

	# The name of the directory in which libraries will be kept.
	lib_dir='lib'
	lib_dirpath="${cur_dirpath}/${lib_dir}"

	# The name of the directory in which the test suite is kept.
	testsuite_dir='testsuite'

	# The install prefix flag.
	install_prefix_def="${HOME}/blis"
	install_prefix=''
	prefix_flag=''

	# Option variables.
	quiet_flag=''

	# The name of the reference configuration sub-directory.
	config_name_ref='reference'

	# The name of the chosen configuration sub-directory.
	config_name=''

	# Dummy file. Used to check whether the cwd is the same as the top-level
	# source distribution directory.
	dummy_file='_blis_dir_detect.tmp'


	# Check whether we need to update the version file.
	${update_version_file_sh} -o "${script_name}" "${version_filepath}"


	# Query which version of BLIS this is.
	version=$(cat ${version_filepath})


	# Process our command line options.
	while getopts ":hp:q" opt; do
		case $opt in
			h  ) print_usage ;;
			p  ) prefix_flag=1
			     install_prefix=$OPTARG ;;
			q  ) quiet_flag=1 ;;
			\? ) print_usage
		esac
	done
	shift $(($OPTIND - 1))


	# Initial message.
	echo "${script_name}: starting configuration of BLIS ${version}."


	# Set config_name based on the number of arguments leftover (after command
	# line option processing).
	if [ $# = "0" ]; then

		configs_avail=$(ls ${config_dirpath})

		echo "${script_name}: "
		echo "${script_name}: *** No configuration given! ***"
		echo "${script_name}: "
		echo "${script_name}: Default configuration behavior is not implemented (for your"
		echo "${script_name}: own safety). Please re-run '${script_name}' and specify one"
		echo "${script_name}: of the existing configurations in the source distribution's"
		echo "${script_name}  '${config_dir}' directory:"
		echo "${script_name}: "
		for conf in ${configs_avail}; do
			echo "${script_name}:   ${conf}"
		done
		echo "${script_name}: "
		echo "${script_name}: or, alternatively, first create a new configuration (placing"
		echo "${script_name}: it in the '${config_dir}' directory) and then run '${script_name}' with"
		echo "${script_name}: that configuration. To build a reference implementation of"
		echo "${script_name}: BLIS, use the '${config_name_ref}' configuration:"
		echo "${script_name}: "
		echo "${script_name}:   ./${script_name} ${config_name_ref}"
		echo "${script_name}: "
		echo "${script_name}: For a full description of how to run ${script_name}, please refer"
		echo "${script_name}: to the output of:"
		echo "${script_name}: "
		echo "${script_name}:   ./${script_name} -h"
		echo "${script_name}: "

		exit 1

	elif [ $# = "1" ]; then

		config_name=$1
		echo "${script_name}: configuring with '${config_name}' configuration sub-directory."
	else

		print_usage
	fi

	# Build the config directory path.
	configname_dirpath="${config_dirpath}/${config_name}"


	# Set the install prefix if it was not already set when parsing the install
	# prefix flag.
	if [ -n "${prefix_flag}" ]; then
		echo "${script_name}: detected -p option; using install prefix '${install_prefix}'."
	else
		install_prefix="${install_prefix_def}"
		echo "${script_name}: no install prefix given; defaulting to '${install_prefix}'."
	fi


	# Insert escape characters into the paths used in the sed command below.
	install_prefix_esc=$(echo "${install_prefix}" | sed 's/\//\\\//g')
	dist_path_esc=$(echo "${dist_path}"           | sed 's/\//\\\//g')
	#echo "${install_prefix_esc}"
	#exit 1


	# Begin substituting information into the config_mk_in file, outputting
	# to config_mk_out.
	echo "${script_name}: creating ${config_mk_out_path} from ${config_mk_in_path}"
	cat "${config_mk_in_path}" \
	    | sed "s/@config_name@/${config_name}/g" \
	    | sed "s/@dist_path@/${dist_path_esc}/g" \
	    | sed "s/@install_prefix@/${install_prefix_esc}/g" \
	    > "${config_mk_out_path}"


	# Create obj sub-directories (if they do not already exist).
	base_obj_dirpath="${obj_dirpath}/${config_name}"

	echo "${script_name}: creating ${base_obj_dirpath}"
	mkdir -p ${base_obj_dirpath}

	obj_config_dirpath="${base_obj_dirpath}/${config_dir}"

	echo "${script_name}: creating ${obj_config_dirpath}"
	mkdir -p ${obj_config_dirpath}

	obj_frame_dirpath="${base_obj_dirpath}/${frame_dir}"

	echo "${script_name}: creating ${obj_frame_dirpath}"
	mkdir -p ${obj_frame_dirpath}

	obj_testsuite_dirpath="${base_obj_dirpath}/${testsuite_dir}"

	echo "${script_name}: creating ${obj_testsuite_dirpath}"
	mkdir -p ${obj_testsuite_dirpath}


	# Create lib directory (if it does not already exist).
	base_lib_dirpath="${lib_dirpath}/${config_name}"

	echo "${script_name}: creating ${base_lib_dirpath}"
	mkdir -p ${base_lib_dirpath}


	# Mirror config source tree to the object config sub-directory.
	echo "${script_name}: mirroring ${configname_dirpath} to ${obj_config_dirpath}"
	${mirror_tree_sh} ${configname_dirpath} ${obj_config_dirpath}

	# Mirror frame source tree to the object frame sub-directory.
	echo "${script_name}: mirroring ${frame_dirpath} to ${obj_frame_dirpath}"
	${mirror_tree_sh} ${frame_dirpath} ${obj_frame_dirpath}


	# Generate makefile fragments in the chosen configuration directory.
	${gen_make_frags_sh} \
	         -h -r -v1 \
	         -o ${script_name} \
	         -p 'CONFIG' \
	         ${configname_dirpath} \
	         ${gen_make_frags_dirpath}/fragment.mk \
	         ${gen_make_frags_dirpath}/suffix_list \
	         ${gen_make_frags_dirpath}/ignore_list \
	         ${gen_make_frags_dirpath}/special_list

	# Generate makefile fragments in the framework directory.
	${gen_make_frags_sh} \
	         -h -r -v1 \
	         -o ${script_name} \
	         -p 'FRAME' \
	         ${frame_dirpath} \
	         ${gen_make_frags_dirpath}/fragment.mk \
	         ${gen_make_frags_dirpath}/suffix_list \
	         ${gen_make_frags_dirpath}/ignore_list \
	         ${gen_make_frags_dirpath}/special_list


	# Under some circumstances, we need to create a symbolic link to the
	# Makefile. We only proceed with this if configure was run with a path
	# other than "./".
	if [ ${dist_path} != "./" ]; then

		# At this point, we know the user did not run "./configure". But we
		# have not yet ruled out "<fullpath>/configure" or some # equivalent
		# that uses relative paths. To further rule out these possibilities,
		# we create a dummy file in the current build directory.
		touch "./${dummy_file}"

		# If the dummy file we just created in the current directory does not
		# appear in the source distribution path, then we are in a different
		# directory and thus we must create a symbolic link.
		if [ ! -f "${dist_path}/${dummy_file}" ]; then

			# If 'Makefile' does not already exist in the current directory,
			# create a symbolic link to it. If one does exist, we us -f to
			# force creation of a new link.
			if [ ! -e "./Makefile" ]; then

				echo "${script_name}: creating symbolic link to Makefile."
				ln -s "${dist_path}/Makefile"

			else
				echo "${script_name}: symbolic link to Makefile already exists; forcing creation of new link."
				ln -sf "${dist_path}/Makefile"
			fi

			echo "${script_name}: configured to build outside of source distribution."
		else

			# Echo what is happening. 
			echo "${script_name}: configured to build within top-level directory of source distribution."
		fi

		# Remove the dummy file.
		rm -f "./${dummy_file}"
	fi


	# Exit peacefully.
	return 0
}


# The script's main entry point, passing all parameters given.
main "$@"
