- Standardize formatting (spacing etc).
- Add full copyright to cmake files (excluding .json)
- Correct copyright and disclaimer text for frame and
zen, skx and a couple of other kernels to cover all
contributors, as is commonly used in other files.
- Fixed some typos and missing lines in copyright
statements.
AMD-Internal: [CPUPL-4415]
Change-Id: Ib248bb6033c4d0b408773cf0e2a2cda6c2a74371
* commit 'cfa3db3f':
Fixed bug in mixed-dt gemm introduced in e9da642.
Removed support for 3m, 4m induced methods.
Updated do_sde.sh to get SDE from GitHub.
Disable SDE testing of old AMD microarchitectures.
Fixed substitution bug in configure.
Allow use of 1m with mixing of row/col-pref ukrs.
AMD-Internal: [CPUPL-2698]
Change-Id: I961f0066243cf26aeb2e174e388b470133cc4a5f
Details:
- Removed support for all induced methods except for 1m. This included
removing code related to 3mh, 3m1, 4mh, 4m1a, and 4m1b as well as any
code that existed only to support those implementations. These
implementations were rarely used and posed code maintenance challenges
for BLIS's maintainers going forward.
- Removed reference kernels for packm that pack 3m and 4m micropanels,
and removed 3m/4m-related code from bli_cntx_ref.c.
- Removed support for 3m/4m from the code in frame/ind, then reorganized
and streamlined the remaining code in that directory. The *ind(),
*nat(), and *1m() APIs were all removed. (These additional API layers
no longer made as much sense with only one induced method (1m) being
supported.) The bli_ind.c file (and header) were moved to frame/base
and bli_l3_ind.c (and header) and bli_l3_ind_tapi.h were moved to
frame/3.
- Removed 3m/4m support from the code in frame/1m/packm.
- Removed 3m/4m support from trmm/trsm macrokernels and simplified some
pointer arithmetic that was previously expressed in terms of the
bli_ptr_inc_by_frac() static inline function (whose definition was
also removed).
- Removed the following subdirectories of level-0 macro headers from
frame/include/level0: ri3, rih, ri, ro, rpi. The level-0 scalar macros
defined in these directories were used exclusively for 3m and 4m
method codes.
- Simplified bli_cntx_set_blkszs() and bli_cntx_set_ind_blkszs() in
light of 1m being the only induced method left within BLIS.
- Removed dt_on_output field within auxinfo_t and its associated
accessor functions.
- Re-indexed the 1e/1r pack schemas after removing those associated with
variants of the 3m and 4m methods. This leaves two bits unused within
the pack format portion of the schema bitfield. (See bli_type_defs.h
for more info.)
- Spun off the basic and expert interfaces to the object and typed APIs
into separate files: bli_l3_oapi.c and bli_l3_oapi_ex.c; bli_l3_tapi.c
and bli_l3_tapi_ex.c.
- Moved the level-3 operation-specific _check function calls from the
operations' _front() functions to the corresponding _ex() function of
the object API. (This change roughly maintains where the _check()
functions are called in the call stack but lays the groundwork for
future changes that may come to the level-3 object APIs.) Minor
modifications to bli_l3_check.c to allow the check() functions to be
called from the expert interface APIs.
- Removed support within the testsuite for testing the aforementioned
induced methods, and updated the standalone test drivers in the 'test'
directory so reflect the retirement of those induced methods.
- Modified the sandbox contract so that the user is obliged to define
bli_gemm_ex() instead of bli_gemmnat(). (This change was made in light
of the *nat() functions no longer existing.) Also updated the existing
'power10' and 'gemmlike' sandboxes to come into compliance with the
new sandbox rules.
- Updated BLISObjectAPI.md, BLISTypedAPI.md, Testsuite.md documentation
to reflect the retirement of 3m/4m, and also modified Sandboxes.md to
bring the document into alignment with new conventions.
- Updated various comments; removed segments of commented-out code.
Merge conflicts araised has been fixed while downstreaming BLIS code from master to milan-3.1 branch
Implemented an automatic reduction in the number of threads when the user requests parallelism via a single number (ie: the automatic way) and (a) that number of threads is prime, and (b) that number exceeds a minimum threshold defined by the macro BLIS_NT_MAX_PRIME, which defaults to 11. If prime numbers are really desired, this feature may be suppressed by defining the macro BLIS_ENABLE_AUTO_PRIME_NUM_THREADS in the appropriate configuration family's bli_family_*.h. (Jeff Diamond)
Changed default value of BLIS_THREAD_RATIO_M from 2 to 1, which leads to slightly different automatic thread factorizations.
Enable the 1m method only if the real domain microkernel is not a reference kernel. BLIS now forgoes use of 1m if both the real and complex domain kernels are reference implementations.
Relocated the general stride handling for gemmsup. This fixed an issue whereby gemm would fail to trigger to conventional code path for cases that use general stride even after gemmsup rejected the problem. (RuQing Xu)
Fixed an incorrect function signature (and prototype) of bli_?gemmt(). (RuQing Xu)
Redefined BLIS_NUM_ARCHS to be part of the arch_t enum, which means it will be updated automatically when defining future subconfigs.
Minor code consolidation in all level-3 _front() functions.
Reorganized Windows cpp branch of bli_pthreads.c.
Implemented bli_pthread_self() and _equals(), but left them commented out (via cpp guards) due to issues with getting the Windows versions working. Thankfully, these functions aren't yet needed by BLIS.
Allow disabling of trsm diagonal pre-inversion at compile time via --disable-trsm-preinversion.
Fixed obscure testsuite bug for the gemmt test module that relates to its dependency on gemv.
AMD-internal-[CPUPL-1523]
Change-Id: I0d1df018e2df96a23dc4383d01d98b324d5ac5cd
Details:
- Adjusted test/3/Makefile so that the test drivers are linked against
Eigen's BLAS library for hemm, herk, trmm, and trsm. We have to do
this since Eigen's headers don't define implementations to the
standard BLAS APIs.
- Simplified #included headers in hemm, herk, trmm, and trsm source
driver files, since nothing specific to Eigen is needed at
compile-time for those operations.
Details:
- Use compile-time implementations of Eigen in test_gemm.c via new
EIGEN cpp macro, defined on command line. (Linking to Eigen's BLAS
library is not necessary.) However, as of Eigen 3.3.7, Eigen only
parallelizes the gemm operation and not hemm, herk, trmm, trsm, or
any other level-3 operation.
- Fixed a bug in trmm and trsm drivers whereby the wrong function
(bli_does_trans()) was being called to determine whether the object
for matrix A should be created for a left- or right-side case. This
was corrected by changing the function to bli_is_left(), as is done
in the hemm driver.
- Added support for running Eigen test drivers from runme.sh.
Details:
- Updated Makefiles in test, test/3, and test/sup so that running any of
the usual targets without having first built BLIS results in a helpful
error message. For example, if BLIS is not yet configured, make will
output:
Makefile:327: *** Cannot proceed: config.mk not detected! Run
configure first. Stop.
Similarly, if BLIS is configured but not yet built, make will output:
Makefile:340: *** Cannot proceed: BLIS library not yet built! Run
make first. Stop.
In previous commits, these actions would result in a rather cryptic
make error such as:
make: *** No rule to make target 'test_sgemm_2400_asm_blis_st.x',
needed by 'blis-nat-st'. Stop.
Details:
- Updated Makefiles in test, test/3, and test/sup so that running any of
the usual targets without having first built BLIS results in a helpful
error message. For example, if BLIS is not yet configured, make will
output:
Makefile:327: *** Cannot proceed: config.mk not detected! Run
configure first. Stop.
Similarly, if BLIS is configured but not yet built, make will output:
Makefile:340: *** Cannot proceed: BLIS library not yet built! Run
make first. Stop.
In previous commits, these actions would result in a rather cryptic
make error such as:
make: *** No rule to make target 'test_sgemm_2400_asm_blis_st.x',
needed by 'blis-nat-st'. Stop.
Details:
- Added missing license header to bli_pwr9_asm_macros_12x6.h.
- Reverted temporary changes to various files in 'test' and 'testsuite'
directories.
- Moved testsuite/jobscripts into testsuite/old.
- Minor whitespace/comment changes across various files.
Implemented and registered power9 dgemm ukernel.
Details:
- Implemented 12x6 dgemm microkernel for power9. This microkernel
assumes that elements of B have been duplicated/broadcast during the
packing step. The microkernel uses a column orientation for its
microtile vector registers and thus implements column storage and
general stride IO cases. (A row storage IO case via in-register
transposition may be added at a future date.) It should be noted that
we recommend using this microkernel with gcc and *not* xlc, as issues
with the latter cropped up during development, including but not
limited to slightly incompatible vector register mnemonics in the GNU
extended inline assembly clobber list.
Details:
- Defined two new static functions in bli_cntx.h:
bli_cntx_set_blksz_def_dt()
bli_cntx_set_blksz_max_dt()
which developers may find convenient when experimenting with different
values of cache blocksizes.
- Updated one- and two-socket multithreaded problem size range and
increment values in test/3/Makefile.
- Changed default to column storage in test/3/test_gemm.c.
- Fixed typo in comment in testsuite/src/test_subm.c.
Details:
- Commented out redundant setting of LIBBLIS_LINK within all driver-
level Makefiles. This variable is already set within common.mk, and
so the only time it should be overridden is if the user wants to link
to a different copy of libblis.
- Very minor changes to build/gen-make-frags/gen-make-frag.sh.
- Whitespace and inconsequential quoting change to configure.
- Moved top-level 'windows' directory into a new 'attic' directory.
Details:
- Fixed the Makefile in test/3 so that it no longer incorrectly labels
the matlab output variables from Eigen-linked hemm, herk, trmm, and
trsm driver output as "vendor". (The gemm drivers were already
correctly outputing matlab variables containing the "eigen" label.)
Details:
- Adjusted test/3/Makefile so that the test drivers are linked against
Eigen's BLAS library for hemm, herk, trmm, and trsm. We have to do
this since Eigen's headers don't define implementations to the
standard BLAS APIs.
- Simplified #included headers in hemm, herk, trmm, and trsm source
driver files, since nothing specific to Eigen is needed at
compile-time for those operations.
Details:
- Use compile-time implementations of Eigen in test_gemm.c via new
EIGEN cpp macro, defined on command line. (Linking to Eigen's BLAS
library is not necessary.) However, as of Eigen 3.3.7, Eigen only
parallelizes the gemm operation and not hemm, herk, trmm, trsm, or
any other level-3 operation.
- Fixed a bug in trmm and trsm drivers whereby the wrong function
(bli_does_trans()) was being called to determine whether the object
for matrix A should be created for a left- or right-side case. This
was corrected by changing the function to bli_is_left(), as is done
in the hemm driver.
- Added support for running Eigen test drivers from runme.sh.
Details:
- Added targets to test/3/Makefile that link against a BLAS library
build by Eigen. It appears, however, that Eigen's BLAS library does
not support multithreading. (It may be that multithreading is only
available when using the native C++ APIs.)
- Updated runme.sh with a few Eigen-related tweaks.
- Minor tweaks to docs/Performance.md.
Details:
- Renamed '3m4m' directory to '3', which captures the directory nicely
since it builds test drivers to test level-3 operations.
- These test drivers ceased to be used to test the 3m and 4m (or even
1m) induced methods long ago, hence the name change.
Details:
- Defined two new static functions in bli_cntx.h:
bli_cntx_set_blksz_def_dt()
bli_cntx_set_blksz_max_dt()
which developers may find convenient when experimenting with different
values of cache blocksizes.
- Updated one- and two-socket multithreaded problem size range and
increment values in test/3/Makefile.
- Changed default to column storage in test/3/test_gemm.c.
- Fixed typo in comment in testsuite/src/test_subm.c.
Details:
- Commented out redundant setting of LIBBLIS_LINK within all driver-
level Makefiles. This variable is already set within common.mk, and
so the only time it should be overridden is if the user wants to link
to a different copy of libblis.
- Very minor changes to build/gen-make-frags/gen-make-frag.sh.
- Whitespace and inconsequential quoting change to configure.
- Moved top-level 'windows' directory into a new 'attic' directory.
Details:
- Fixed the Makefile in test/3 so that it no longer incorrectly labels
the matlab output variables from Eigen-linked hemm, herk, trmm, and
trsm driver output as "vendor". (The gemm drivers were already
correctly outputing matlab variables containing the "eigen" label.)
Details:
- Adjusted test/3/Makefile so that the test drivers are linked against
Eigen's BLAS library for hemm, herk, trmm, and trsm. We have to do
this since Eigen's headers don't define implementations to the
standard BLAS APIs.
- Simplified #included headers in hemm, herk, trmm, and trsm source
driver files, since nothing specific to Eigen is needed at
compile-time for those operations.
Details:
- Use compile-time implementations of Eigen in test_gemm.c via new
EIGEN cpp macro, defined on command line. (Linking to Eigen's BLAS
library is not necessary.) However, as of Eigen 3.3.7, Eigen only
parallelizes the gemm operation and not hemm, herk, trmm, trsm, or
any other level-3 operation.
- Fixed a bug in trmm and trsm drivers whereby the wrong function
(bli_does_trans()) was being called to determine whether the object
for matrix A should be created for a left- or right-side case. This
was corrected by changing the function to bli_is_left(), as is done
in the hemm driver.
- Added support for running Eigen test drivers from runme.sh.
Details:
- Added targets to test/3/Makefile that link against a BLAS library
build by Eigen. It appears, however, that Eigen's BLAS library does
not support multithreading. (It may be that multithreading is only
available when using the native C++ APIs.)
- Updated runme.sh with a few Eigen-related tweaks.
- Minor tweaks to docs/Performance.md.
Details:
- Renamed '3m4m' directory to '3', which captures the directory nicely
since it builds test drivers to test level-3 operations.
- These test drivers ceased to be used to test the 3m and 4m (or even
1m) induced methods long ago, hence the name change.
