-To enable Weight-only-Quantization (WOQ) workflow, new LPGEMM APIs
are required where data types are A:bf16, B:int4 and C:f32/bf16. It
is expected that the BF16 kernels will be reused within this API and
subsequently the B matrix needs to be reordered following the BF16
kernel schema, but with the reordered matrix type still being int4. To
address this, new BF16 reorder kernels enabling the same are added.
AMD-Internal: [SWLCSG-2943]
Change-Id: Ib770ecbf90a3d906deafece94b1a96e0b9412738
- Replaced "vmovupd" with "vmovups" for "bli_scopyv_zen4_asm_avx512"
kernel.
- Optimization of loop unrolling for "bli_dcopyv_zen4_asm_avx512"
and "bli_scopyv_zen4_asm_avx512" kernels.
- Replaced existing load balancing algorithm for dcopy API with
"bli_thread_range_sub" algorithm.
- Included AOCL-dynamic values for optimial number of threads
for zen5 architecture.
AMD-Internal: [CPUPL-5238]
Change-Id: Ic82bdfad9478c8f75dc5a3dcfed0df85fbcae957
- Enabled AVX512 DAXPYF kernels for DGEMV var2 for NO_TRANSPOSE cases.
- Added DAXPYF kernels with fuse factors of 2, 4, 6 and 16.
- Added a wrapper for DAXPYF kernels for redirection to kernels with a
smaller fuse factor than 32.
- Also added UKR tests for the new fused kernels.
AMD-Internal: [CPUPL-5098]
Change-Id: I0b102b67c6c068873393bac0494284f379c253f2
- Logic to calculate the kernel index in AVX512
DGEMMT SUP framework is incorrect.
- The granularity for workload distribution along N
dimension is NR(8), whereas current logic to pick
diagonal kernel assumes the granularity to be MR (24).
- To Fix this, the logic to determine the kernel index is
changed, instead of relying solely on n_offset, the kernel
index is derived depending on distance from the diagonal.
- If distance from diagonal is greater than
LCM of (MR and NR) - NR, that that means the current micro
panel is not a diagonal micro panel.
- If the micro panel is a diagonal micro panel, then the
distance from diagonal is equal to the M dimension for
initial full GEMM region or empty region of diagonal
kernel. This info can be used to determine the kernel index.
AMD-Internal: [CPUPL-5440]
Change-Id: I640d3a1b43e63b24bc9f0ed4a67cced45f6fa3b3
-_mm512_cvtpbh_ps intrinsic is not supported in older versions of gcc
(<gcc 12.2) and subsequently throws a compilation error. This is fixed
by replacing this intrinsic with a macro that achieves the bf16 to f32
conversion via shift operations.
-Bug fixes in the vector scale factor load in fringe kernels.
AMD-Internal: [SWLCSG-2945]
Change-Id: I8eac4c4b34b043e7a8116dc465723d8f85b28018
- In order to reuse 24x8 AVX512 DGEMM SUP kernels,
24x8 triangular AVX512 DGEMMT SUP kernels are added.
- Since the LCM of MR(24) and NR(8) is 24, therefore the diagonal
pattern repeats every 24x24 block of C. To cover this 24x24 block,
3 kernels are needed for one variant of DGEMMT. A total of 6
kernels are needed to cover both upper and lower variants.
- In order to maximize code reuse, the 24x8 kernels are broken
into two parts, 8x8 diagonal GEMM and 16x8 full GEMM. The 8x8
diagonal GEMM is computed by 8x8 diagonal kernel, and 16x8
full GEMM part is computed by 24x8 DGEMM SUP kernel.
- Changes are made in framework to enable the use of these kernels.
AMD-Internal: [CPUPL-5338]
Change-Id: I8e7007031e906f786b0c4fe12377ee439075207a
- Implemented AVX512 computational kernel for DAXPBYV
with optimal unrolling. Further implemented the other
missing kernels that would be required to decompose
the computation in special cases, namely the AVX512
DADDV and DSCAL2V kernels.
- Updated the zen4 and zen5 contexts to ensure any query
to acquire the kernel pointer for DAXPBYV returns the
address of the new kernel.
- Added micro-kernel units tests to GTestsuite to check
for functionality and out-of-bounds reads and writes.
AMD-Internal: [CPUPL-5406][CPUPL-5421]
Change-Id: I127ab21174ddd9e6de2c30a320e62a8b042cbde6
- This change in made in CMAKE build system only.
- Removed -fno-tree-loop-vectorize from global kernel flags,
instead added it to lpgemm specific kernels only.
- If this flag is not used , then gcc tries to auto
vectorize the code which results in usages of
vector registers, if the auto vectorized function
is using intrinsics then the total numbers of vector
registers used by intrinsic and auto vectorized
code becomes more than the registers
available in machine which causes read and writes
to stack, which is causing regression in lpgemm.
- If this flag is enabled globally, then the files which
do not use any intrinsic code do not get auto
vectorized.
- To get optimal performance for both blis and lpgemm,
this flag is enabled for lpgemm kernels only.
Change-Id: I14e5c18cd53b058bfc9d764a8eaf825b4d0a81c4
- Implemented a new front-end for the BLAS/CBLAS calls
to ?AXPBYV(BLAS-extension API), that is intended to
be compiled only on Zen micro-architectures(as per the
existing build system).
- This new front-end makes the framework lightweight for
BLAS/CBLAS calls to ?AXPBYV, by directly querying the
architecture ID and deploying the associated computational
kernel.
- Further updated the rerouting to other L1 kernels based
on alpha and beta value. This was initially present in
the Typed-API interface. It has been moved inside the
respective kernels, and only necessary rerouting is done
to specific L1 kernels to avoid redundant checks.
AMD-Internal: [CPUPL-5406]
Change-Id: I4af943d477a25dcdab4ee6009ad3dfa6a5c2b37e
-Quantization of f32 to bf16 (bf16 = (f32 * scale_factor) + zero_point)
instead of just type conversion in aocl_gemm_bf16bf16f32obf16.
-Support for multiple scale/sum/matrix_add/bias post-ops in a single
LPGEMM api call.
-Post-ops mask related fixes in lpgemv kernels .
-Additional scale post-ops sanity checks.
AMD-Internal: [SWLCSG-2945]
Change-Id: I3b35cc413c176bb50bfdbd6acd4839a5ba7e94bb
- Implemented two new axpyf kernels for fused factors 8 and 12
by manually unrolling the loops. Used to achieve better performance
in var2 case.
AMD-Internal: [CPUPL-5184]
Change-Id: I40d2930d003c6ce90323b5c8a52564563d1f23f5
- Added CSCALV kernel utilizing the AVX512 ISA.
- Added function pointers for the same to zen4 and zen5 contexts.
- Updated the BLAS interface to invoke respective CSCALV kernels based
on the architecture.
- Added UKR tests for bli_cscalv_zen_int_avx512( ... ).
AMD-Internal: [CPUPL-5299]
Change-Id: I189d87a1ec1a6e30c16e05582dcb57a8510a27f3
Description:
In recent changes bli_print_msg is used in lpgemm
test application file bench_lpgemm.c for printing error
message. bli_print_msg is a blis library function which
is not exported for the usage of applications, because
of which linking failed when blis shared library is used
to build.
Updated bli_print_msg with printf in the bench_lpgemm.c
AMD Internal: CPUPL-5326
Change-Id: I021849baa6881bd997013e42013db1c5c711627f
- Introduced new 8x24 macro kernels.
- 4 new kernels are added for beta 0, beta 1, beta -1
and beta N.
- IR and JR loop moved to ASM region.
- Kernels support row major storage scheme.
- Prefetch of current micro panel of C is enabled.
- Kernel supports negative offsets for A and B matrices.
- Moved alpha scaling from DGEMM kernel to B pack kernel.
- Tuned blocksizes for new kernel.
- Added support for alpha scaling in 24xk pack kernel.
- Reverted back to old b_next computation
in gemm_ker_var2.
- BugFix in 8x24 DGEMM kernel for beta 1,
comparsion for jmp conditions was done using integer
instructions, which caused beta 1 path to never be taken.
Fixed this by changing the comparsion to double.
AMD-Internal: [CPUPL-5262]
Change-Id: Ieec207eea2a164603c8a8ea88e0b1d3095c29a3f
- Implemented bli_zgemm_16x4_avx512_k1_nn( ... ) AVX512 kernel to
be used as part of BLAS/CBLAS calls to ZGEMM. The kernel is built
for handling the GEMM computation with inputs having k = 1,
with the transpose values being N(for column-major) and T(for
row-major).
- Updated the zgemm_blis_impl( ... ) layer to query the architecture
ID and invoke the AVX2 or AVX512 kernel accordingly.
- Added API level tests for accuracy and code-coverage, as well as
micro-kernel tests for verifying functionality and out-of-bounds
memory accesses.
AMD-Internal: [CPUPL-5249]
Change-Id: Id1f8bebff3e0da83c7febe86299564fd658b2e84
- Replaced 'bli_zaxpyv_zen_int5' kernel with optimised
'bli_zaxpyv_zen_int_avx512' kernel for zen4 and
zen5 config.
- Implemented multithreading support and AOCL-dynamic
for ZAXPY API.
- Utilized 'bli_thread_range_sub' function to achieve
better work distribution and avoid false sharing.
AMD-Internal: [CPUPL-5250]
Change-Id: I46ad8f01f9d639e0baa78f4475d6e86458d8069b
Initailized c_save instead of 'c" and then removed copying c to c_save.
Because at the start every n_repeats iteration we are copying back c_save to c.
Therefore if we initialize c_save, we can avoid extra copy of "c" to c_save before calling
GEMM. For very large sizes matrix initialization takes considerable amount of time. This can
be reduced now.
Change-Id: I2c6ffe169e991607314897cb0c1fbfc0d74ef179
* commit 'cfa3db3f':
Fixed bug in mixed-dt gemm introduced in e9da642.
Removed support for 3m, 4m induced methods.
Updated do_sde.sh to get SDE from GitHub.
Disable SDE testing of old AMD microarchitectures.
Fixed substitution bug in configure.
Allow use of 1m with mixing of row/col-pref ukrs.
AMD-Internal: [CPUPL-2698]
Change-Id: I961f0066243cf26aeb2e174e388b470133cc4a5f
Details:
- Corrected the usage of vpdpbusd instruction in
GEMV implementation for INT8 APIs.
- Modified bench to fill matrices with values
ranging between -5 and +5 whenever the datatype is
a signed integer.
Change-Id: I457462b888b667d8a34c53de762e9b4aee784ecc
Reordering B matrix of datatype int4 is done as per the pack schema
requirements of u8s8s32 kernel. However for fringe cases, the
matrix pointer increments need to be halved to account for the half
byte size of int4 elements.
AMD-Internal: [SWLCSG-2390]
Change-Id: I22a04c4c8133db6ae6ca0a4d3e86c11aba1e2cdb
* commit '81e10346':
Alloc at least 1 elem in pool_t block_ptrs. (#560)
Fix insufficient pool-growing logic in bli_pool.c. (#559)
Arm SVE C/ZGEMM Fix FMOV 0 Mistake
SH Kernel Unused Eigher
Arm SVE C/ZGEMM Support *beta==0
Arm SVE Config armsve Use ZGEMM/CGEMM
Arm SVE: Update Perf. Graph
Arm SVE CGEMM 2Vx10 Unindex Process Alpha=1.0
Arm SVE ZGEMM 2Vx10 Unindex Process Alpha=1.0
A64FX Config Use ZGEMM/CGEMM
Arm SVE Typo Fix ZGEMM/CGEMM C Prefetch Reg
Arm SVE Add SGEMM 2Vx10 Unindexed
Arm SVE ZGEMM Support Gather Load / Scatt. St.
Arm SVE Add ZGEMM 2Vx10 Unindexed
Arm SVE Add ZGEMM 2Vx7 Unindexed
Arm SVE Add ZGEMM 2Vx8 Unindexed
Update Travis CI badge
Armv8 Trash New Bulk Kernels
Enable testing 1m in `make check`.
Config ArmSVE Unregister 12xk. Move 12xk to Old
Revert __has_include(). Distinguish w/ BLIS_FAMILY_**
Register firestorm into arm64 Metaconfig
Armv8 DGEMMSUP Fix Edge 6x4 Switch Case Typo
Armv8 DGEMMSUP Fix 8x4m Store Inst. Typo
Add test for Apple M1 (firestorm)
Firestorm CPUID Dispatcher
Armv8 GEMMSUP Edge Cases Require Signed Ints
Make error checking level a thread-local variable.
Fix data race in testsuite.
Update .appveyor.yml
Firestorm Block Size Fixes
Armv8 Handle *beta == 0 for GEMMSUP ??r Case.
Move unused ARM SVE kernels to "old" directory.
Add an option to control whether or not to use @rpath.
Fix $ORIGIN usage on linux.
Arm micro-architecture dispatch (#344)
Use @path-based install name on MacOS and use relocatable RPATH entries for testsuite inaries.
Armv8 Handle *beta == 0 for GEMMSUP ?rc Case.
Armv8 Fix 6x8 Row-Maj Ukr
Apply patch from @xrq-phys.
Add explicit handling for beta == 0 in armsve sd and armv7a d gemm ukrs.
bli_error: more cleanup on the error strings array
Arm SVE Exclude SVE-Intrinsic Kernels for GCC 8-9
Arm SVE: Correct PACKM Ker Name: Intrinsic Kers
Fix config_name in bli_arch.c
Arm Whole GEMMSUP Call Route is Asm/Int Optimized
Arm: DGEMMSUP `Macro' Edge Cases Stop Calling Ref
Header Typo
Arm: DGEMMSUP ??r(rv) Invoke Edge Size
Arm: DGEMMSUP ?rc(rd) Invoke Edge Size
Arm: Implement GEMMSUP Fallback Method
Arm64 Fix: Support Alpha/Beta in GEMMSUP Intrin
Added Apple Firestorm (A14/M1) Subconfig
Arm64 8x4 Kernel Use Less Regs
Armv8-A Supplimentary GEMMSUP Sizes for RD
Armv8-A Fix GEMMSUP-RD Kernels on GNU Asm
Armv8-A Adjust Types for PACKM Kernels
Armv8-A GEMMSUP-RD 6x8m
Armv8-A GEMMSUP-RD 6x8n
Armv8-A s/d Packing Kernels Fix Typo
Armv8-A Introduced s/d Packing Kernels
Armv8-A DGEMMSUP 6x8m Kernel
Armv8-A DGEMMSUP Adjustments
Armv8-A Add More DGEMMSUP
Armv8-A Add GEMMSUP 4x8n Kernel
Armv8-A Add Part of GEMMSUP 8x4m Kernel
Armv8A DGEMM 4x4 Kernel WIP. Slow
Armv8-A Add 8x4 Kernel WIP
AMD-Internal: [CPUPL-2698]
Change-Id: I194ff69356740bb36ca189fd1bf9fef02eec3803
Use of AOCL_ENABLE_INSTRUCTIONS in dgemm tiny code path is
unnecessary and incorrectly caused AVX512 code to be run
on zen4 and later processors when AOCL_ENABLE_INSTRUCTIONS=avx2
or equivalent options was selected.
Replace with code to select kernel in a similar way to other
dgemm code paths and other APIs. Note that at present AVX2 code
is used the smallest matrix sizes on all zen platforms.
AMD-Internal: [CPUPL-5078]
Change-Id: Ie6b4895461cbbb915d2b48b92fc063f5cd6adb85
- Implemented bli_dnorm2fv_unb_var1_avx512( ... ) AVX512
computational kernel for DNRM2 API.
- Updated the header to include this kernel signature, as well
as the framework layer to use this function in case of ZEN4
and ZEN5 configurations.
- Updated the tipping points for ideal thread setting in DNRM2
for ZEN5 micro-architecture. These thresholds are specific
to the library's linkage to LLVM's OpenMP or GNU's OpenMp.
- Further abstracted the AOCL-DYNAMIC logic to separate functions
for ?NRM2 APIs that currently support it(namely, DNRM2 and ZNRM2).
- Further updated the ?NRM2 framework to accommodate the necessary
changes to invoke the newer AOCL-DYNAMIC functions and the AVX512
kernel, when needed.
- Added micro-kernel and memory tests for this kernel in GTestsuite,
to validate accuracy and out-of-bounds read and write.
AMD-Internal: [CPUPL-5265]
Change-Id: I4fc0d0f1e6906bf27d46562ca387c338cc4d2049
Support for reordering B matrix of datatype int4 as per the pack schema
requirements of u8s8s32 kernel. Vectorized int4_t -> int8_t conversion
implemented via leveraging the vpmultishiftqb instruction. The reordered
B matrix will then be used in the u8s8s32o<s32|s8> api.
AMD-Internal: [SWLCSG-2390]
Change-Id: I3a8f8aba30cac0c4828a31f1d27fa1b45ea07bba
Details:
- For a variable x, Using address of x in an instruction throws
exception if the difference between &x and access position is
larger than 2 GiB. To solve this issue all variables are stored
within the JIT code section and are accessed using relative addressing.
- Fixed a bug in B matrix pack function for s8s8s32os32 API.
- Fixed a bug in JIT code to apply bias on col-major matrices.
AMD-Internal: [SWLCSG-2820]
Change-Id: I82f117a0422c794cb9b1a4d65a89d60de4adfd96
- Updated the existing code-path for ?AXPBYV to
reroute the inputs to the appropriate L1 kernel,
based on the alpha and beta value. This is done
in order to utilize sensible optimizations with
regards to the compute and memory operations.
- Updated the typed API interface for ?AXPBYV to include
an early exit condition(when n is 0, or when alpha is
0 and beta is 1). Further updated this layer to query
the right kernel from context, based on the input values
of alpha and beta.
- Added the necessary L1 vector kernels(i.e, ?SETV, ?ADDV,
?SCALV, ?SCAL2V and ?COPYV) to be used as part of special
case handling in ?AXPBYV.
- Moved the early return with negative increments from ?SCAL2V
kernels to its typed API interface.
- Updated the zen, zen2 and zen3 context to include function
pointers for all these vector kernels.
- Updated the existing ?AXPBYV vector kernels to handle only
the required computation. Additional cleanup was done to
these kernels.
- Added accuracy and memory tests for AVX2 kernels of ?SETV
?COPYV, ?ADDV, ?SCALV, ?SCAL2V, ?AXPYV and ?AXPBYV APIs
- Updated the existing thresholds in ?AXPBYV tests for complex
types. This is due to the fact that every complex multiplication
involves two mul ops and one add op. Further added test-cases
for API level accuracy check, that includes special cases of
alpha and beta.
- Decomposed the reference call to ?AXPBYV with several other
L1 BLAS APIs(in case of the reference not supporting its own
?AXPBYV API). The decomposition is done to match the exact
operations that is done in BLIS based on alpha and/or beta
values. This ensures that we test for our own compliance.
AMD-Internal: [CPUPL-4861]
Change-Id: Ia6d48f12f059f52b31c0bef6c75f47fd364952c6
- Updated the fused kernels (DOTXF and AXPYF) to properly handle cases
when b_n > fuse_factor.
- The fused kernels are expected to invoke respective Level-1 kernels
iteratively when b_n > fuse_factor.
AMD-Internal: [CPUPL-5246]
Change-Id: Ie7a0f4e61ede088663e3491269b3f1398d028095
BUG:
When alpha real and imaginary is zero
Output is computed as C= Beta * C + A * B instead of C = Beta * C
FIX:
Updated kernel to scale A * B product with alpha in case of alpha=0
Existing framework design:
- When alpha real and imaginary value is zero, framework handles to skip
kernel call to avoid alpha * A * B operation
- SCALM is invoked to perform Beta * C
- Accuracy issue was not observed as alpha=0 was handled in framework
- If we call kernel directly with alpha=0, results would be wrong
- Issue was figured out during microkernel testing using gtestsuite
AMD-Internal: [CPUPL-4454]
Change-Id: Ib6113f5226cd7c26a63781cdd20d35660f453803
- Modifying threading framework for L1 APIs to update only number of threads from runtime env and avoid overhead of reading other ICVs.
- Removing bli_arch_set_id_once() from bli_arch_set_id_once() flow as bli_arch_check_id_once() calls it.
AMD-Internal: [CPUPL-4877]
Change-Id: I87b346825a96d74e746a41530b6d22ae162f19ba
- When n=1, reorder of B matrix is avoided to efficiently
process data. A dot-product based kernel is implemented to
perform gemv when n=1.
AMD-Internal: [SWLCSG-2354]
Change-Id: If5f74651ab11232d0b87d34bd05f65aacaea94f1
Changes to how AOCL_ENABLE_INSTRUCTIONS handles requests
for different ISAs (i.e. BLIS sub-configurations):
- Add missing SSE and AVX options. These will all chose the
generic option in amdzen builds.
- For unsupported ISAs (e.g. AVX512 on Milan), select the
hardware's default sub-configuration instead of trying
to step down through alternative choices.
- For invalid options, or options not implemented in the BLIS
build (e.g. skx in amdzen build), select the hardware's
default sub-configuration instead of aborting.
Currently BLIS_ARCH_TYPE behaviour is not affected by these
changes.
AMD-Internal: [CPUPL-5078]
Change-Id: Idbd00d2806b1679889a9249878c51981c8d23b3f
- Introduced new 8x24 row preferred kernel for zen5.
- Kernel supports row/col/gen
storage schemes.
- Prefetch of current panel of A and C
are enabled.
- Prefetch of next panel of B is enabled.
- Kernel supports negative offsets for A and B
matrices.
- Cache block tuning is done for zen5 core.
AMD-Internal: [CPUPL-5262]
Change-Id: I058ea7e1b751c20c516d7b27a1f27cef96ef730f
- Updated nt_ideal to 12 for n_elem <= 2500000 and nt_ideal to 16 for
n_elem <= 4000000
AMD-Internal: [CPUPL-4408]
Change-Id: I97c143ab0d9b97e797358af93181c71d948757cc
Enabled command line option to link libiomp5.so or libomp.so or libgomp.so libraries using cmake.
Eg:- -DOpenMP_libomp_LIBRARY=<path to openmp library including library name>.
If we not set above variable, by default openmp library will be libomp.so for clang and libgomp.so for gcc compiler.
Change-Id: I5bffa10ff8351f5d10f0d543cbdf55aa16c84c90
- Fixed bug in ddotxf generic tests where the parameters lda_inc and
inca were being read incorrectly.
- Fixed bug in dotxf test wherein the y vector was being generated with
length m instead of b.
- Corrected function signatures to use type gtint_t instead of gint_t.
- Updated the tests to use conjugate values of type char and convert to
conj_t type only while invoking BLIS tests for both DOTXF and AXPYF.
AMD-Internal: [CPUPL-5117]
Change-Id: I0ef7af429057583a1cbf34827802e72401181caf
Improve consistency in test names across different APIs:
- Improve consistency of TEST_P part of test names.
- Rename *_evt_testing.cpp and nrm2_extreme.cpp files to
*_evt.cpp to match other APIs.
- Standardize naming of IIT_ERS files.
Also:
- Restore trsv IIT_ERS file which was misnamed in commit
a2beef3255
- Tidy ukr gemm tests to be more consistent with each other
and move threshold setting to individual TEST_P functions
to allow different adjustments to be made.
- Similarly make trsm tests more consistent.
- Tidy naming of is_memory_test variable.
AMD-Internal: [CPUPL-4500]
Change-Id: I0af1fc9973b02187b19a7c2488eed1b829cfdc2f
Description:
- _mm512_storeu_epi8 and _mm512_storeu_epi16
intrensic instructions are not available in gcc-10
- Replaced above intrensics _mm512_storeu_si512
Change-Id: I2878780b7acd040ccf45e571d486ff8c2388088c
-As it stands the bf16bf16f32ob16 API expects bias array to be of type
float. However actual use case requires the usage of bias array of bf16
type. The bf16 micro-kernels are updated to work with bf16 bias array by
upscaling it to float type and then using it in the post-ops workflow.
-Corrected register usage in bf16 JIT generator for bf16bf16f32ob16 API
when k > KC.
AMD-Internal: [SWLCSG-2604]
Change-Id: I404e566ff59d1f3730b569eb8bef865cb7a3b4a1
Description:
--Added support for tranB in u8s8s32o<s32|s8> and
s8s8s32o<s32|s8> API's
--Updated the bench_lpgemm by adding options to
support transpose of B matrix
--Updated data_gen_script.py in lpgemm bench
according to latest input format.
AMD-Internal: [SWLCSG-2582]
Change-Id: I4a05cc390ae11440d6ff86da281dbafbeb907048
BLIS includes the BLAS and CBLAS interfaces for zdscal
but not the BLIS typed interface bli_zdscalv. Thus, when
TEST_INTERFACE=BLIS_TYPED is defined, disable tests
for zdscal.
AMD-Internal: [CPUPL-4671]
Change-Id: I397454c83e272f9e775e37e00533002576041a93
- Updated the parameter check for leading dimensions in the
functions handling transpose case of matrix A.
- Updated the logic to perform ?IMATCOPY operation. The new
logic uses an auxiliary buffer to copy and scale in place,
if and when needed. This is done in order to avoid overwriting
any subsequent reads that might follow(specifically in case
of having different leading dimensions for reading and writing).
- Updated xerbla_() to throw memory allocation failure based on
INFO parameter being -10. This value is specific to its use-case
in ?IMATCOPY, where it is set to -10.
- Updated the Extreme Value Tests(EVT) logger for ?IMATCOPY
for uniformity.
- Cleaned up the files to follow coding conventions.
AMD-Internal: [CPUPL-4862][SWLCSG-2706]
Change-Id: I34dfa2bcb66b821315e11f7ab2139c41a79ef780
- Correct value of alpha in ger ERS test.
- rename ERS_IIT.cpp files to match naming convention
used for other APIs.
- Change all cases of gint_t to gtint_t except for
dotxf, which is fixed in another commit.
- Add TEST_UPPERCASE_ARGS to imatcopy and omatcopy{2}
headers.
- Corrected typo.
AMD-Internal: [CPUPL-4500]
Change-Id: I8844bb8c5941785e64daa9df5569092c19f91838
-Adding multiplier for complex APIs.
-Updating for trmv and trsv to reflect multiplication with alpha.
AMD-Internal: [CPUPL-4500]
Change-Id: I17361da5afa5d1e219b4c8a14542e2b216a7ea58
Improve consistency in test names across different APIs.
In this commit, standardize leading dimensions (lda, ldb,
ldc) in test names. Also some misc tidying changes.
AMD-Internal: [CPUPL-4500]
Change-Id: Icbc82d0b9a3420ddfdb4f418396f9e56ab1765ab
