It seems that -O3 might be causing intermittent problems with the f2c'ed packed and banded code. -O3 is retained for kernel code. Fixes#341 and fixes#342.
Details:
- Added the -fomit-frame-pointer compiler option to the CKOPTFLAGS
variable in the following make_defs.mk files:
config/haswell/make_defs.mk
config/skx/make_defs.mk
as well as comments that mention why the compiler option is needed.
This option is needed to prevent the compiler from using the rbp
frame register (in the very early portion of kernel code, typically
where k_iter and k_left are defined and computed), which, as of
1c719c9, is used explicitly by the gemmsup millikernels. Thanks to
Devin Matthews for identifying this missing option and to Jeff
Diamond for reporting the original bug in #417.
- The file
config/zen/amd_config.mk
which feeds into the make_defs.mk for both zen and zen2 subconfigs,
was also touched, but only to add a commented-out compiler option
(and the aforementioned explanatory comment) since that file already
uses -fomit-frame-pointer in COPTFLAGS, which forms the basis of
CKOPTFLAGS.
* Fix vectorized version of bli_amaxv
To match Netlib, i?amax should return:
- the lowest index among equal values
- the first NaN if one is encountered
* Fix typos.
* And another one...
* Update ref. amaxv kernel too.
* Re-enabled optimized amaxv kernels.
Details:
- Re-enabled the optimized, intrinsics-based amaxv kernels in the 'zen'
kernel set for use in haswell, zen, zen2, knl, and skx subconfigs.
These two kernels (for s and d datatypes) were temporarily disabled in
e186d71 as part of issue #380. However, the key missing semantic
properties that prompted the disabling of these kernels--returning the
index of the *first* rather than of the last element with largest
absolute value, and returning the index of the first NaN if one is
encountered--were added as part of #382 thanks to Devin Matthews.
Thus, now that the kernels are working as expected once more, this
commit causes these kernels to once again be registered for the
affected subconfigs, which effectively reverts all code changes
included in e186d71.
- Whitespace/formatting updates to new macros in bli_amaxv_zen_int.c.
Co-authored-by: Field G. Van Zee <field@cs.utexas.edu>
Details:
- Disabled use of optimized amaxv kernels, which use vector intrinsics
for both 's' and 'd' datatypes. We disable these kernels because the
current implementations fail to observe a semantic property of the
BLAS i?amax_() subroutine, which is to return the index of the
*first* element containing the maximum absolute value (that is, the
first element if there exist two or more elements that contain the
same value). With the optimized kernels disabled, the affected
subconfigurations (haswell, zen, zen2, knl, and skx) will use the
default reference implementations. Thanks to Mat Cross for reporting
this issue via #380.
- CREDITS file update.
Details:
- Changed -funsafe-loop-optimizations (re-)introduced in 7690855 for
make_defs.mk files' CRVECFLAGS to -funsafe-math-optimizations (to
account for a miscommunication in issue #300). Thanks to Dave Love
for this suggestion and Jeff Hammond for his feedback on the topic.
Details:
- Restored use of -funsafe-loop-optimizations in the definitions of
CRVECFLAGS (when using gcc), but only for sub-configurations (and
not configuration families such as amd64, intel64, and x86_64).
This more or less reverts 5190d05 and 6cf1550.
Details:
- Per Dave Love's recommendation in issue #300, this commit defines
COPTFLAGS := -03
and
CRVECFLAGS := $(CKVECFLAGS) -funsafe-loop-optimizations
in the make_defs.mk for all Intel- and AMD-based configurations.
Details:
- Fixed code in the skx subconfiguration that became a bug after
committing bdd46f9. Specifically, the bli_cntx_init_skx() function
was overwriting default blocksizes for the scomplex and dcomplex
microkernels despite the fact that only single and double real
microkernels were being registered. This was not a problem prior to
bdd46f9 since all microkernels used dynamically-queried (at runtime)
register blocksizes for loop bounds. However, post-bdd46f9, this
became a bug because the reference ukernels for scomplex and dcomplex
were written with their register blocksizes hard-coded as constant
loop bounds, which conflicted the the erroneous scomplex and dcomplex
values that bli_cntx_init_skx() was setting in the context. The
lesson here is that going forward, all subconfigurations must not set
any blocksizes for datatypes corresponding to default/reference
microkernels. (Note that a blocksize is left unchanged by the
bli_cntx_set_blkszs() function if it was set to -1.)
Details:
- Removed explicit reference to The University of Texas at Austin in the
third clause of the license comment blocks of all relevant files and
replaced it with a more all-encompassing "copyright holder(s)".
- Removed duplicate words ("derived") from a few kernels' license
comment blocks.
- Homogenized license comment block in kernels/zen/3/bli_gemm_small.c
with format of all other comment blocks.
Details:
- Renamed the following C preprocessor macros whose fallback/default
values are specified within frame/include/bli_kernel_macro_defs.h:
BLIS_DEFAULT_MR_THREAD_MAX -> BLIS_THREAD_MAX_IR
BLIS_DEFAULT_NR_THREAD_MAX -> BLIS_THREAD_MAX_JR
BLIS_DEFAULT_M_THREAD_RATIO -> BLIS_THREAD_RATIO_M
BLIS_DEFAULT_N_THREAD_RATIO -> BLIS_THREAD_RATIO_N
- Renamed the above cpp macro overrides within the knl, skx, and zen
sub-configurations, as well as invocations of those macros in
bli_rntm.c.
- Moved config/zen/bli_kernel.h to an 'old' directory as it is no longer
used by any code within BLIS.
Details:
- Added the new bli_dgemm_skx_asm_16x14.c microkernel from the skx-redux
branch, along with appropriate blocksizes in bli_cntx_init_skx.c and
a prototype in bli_kernels_skx.h. (Devin has not yet written the
sgemm analague, so for now we will continue using the older sgemm
ukernel.)
- Updated frame/include/bli_x86_asm_macros.h with a minor change that
was present within the skx-redux branch.
Details:
- Removed four trailing spaces after "BLIS" that occurs in most files'
commented-out license headers.
- Added UT copyright lines to some files. (These files previously had
only AMD copyright lines but were contributed to by both UT and AMD.)
- In some files' copyright lines, expanded 'The University of Texas' to
'The University of Texas at Austin'.
- Fixed various typos/misspellings in some license headers.
Details:
- Historically, the compiler selection has happened statically in the
various make_defs.mk and would only be overriden by setting CC (either
prior to running configure or as a configure argument). However, in
the last couple months, configure has evolved to contain rather
sophisticated compiler detection logic for the purposes of blacklisting
sub-configurations. It only makes sense that configure now fully take
over the responsibility of selecting a compiler from the GNU make side
of the build system. Thanks to Alex Arslan for his help exposing this
issue.
- Substitute found_cc into CC in config.mk via configure.
- Set a new variable, CC_VENDOR, in config.mk via substitution from
configure, and disable the corresponding CC_VENDOR code in common.mk.
- Disabled default compiler selection (usually gcc) in the sub-configs'
various make_def.mk files.
Details:
- Imported the 24x16 knl sgemm microkernel (and its corresonding spackm
kernel) from TBLIS and enabled its use in the knl sub-config. Also
Added sgemm microkernel prototype to bli_kernels_knl.h.
- Updated dgemm and dpackm microkernels from TBLIS, which included an
important change regarding the offsets array (changed from extern
declaration to static declaration/definition).
- Activated use of level-1v and -1f zen kernels in skx and knl
sub-configs.
- Removed some old macros no longer needed in bli_family_skx.h now that
libmemkind support exists in configure.
- Moved bli_avx512_macros.h to frame/include and adjusted #includes in
skx and knl kernels accordingly.
- Moved unused kernels in kernels/knl/3 to kernels/knl/3/other
directory.
- Fixed a minor bug in the 'make' output per compile when verboseness
is not turned on. The rule-generating function 'make-kernel-rule' was
previously passing in the name of the config, rather than the name of
the kernel set returned by get-config-for-kset, which could give
misleading information to the user when the kconfig_map mapped a
kernel set to a sub-configuration that did not share the same name.
(This didn't affect the CFLAGS that were actually used.)
- Updated test/3m4m/Makefile, removing acml targets and renaming the
remaining targets.
Details:
- Removed some old conditional code in config/knl/make_defs.mk that
added -lmemkind to LDFLAGS if DEBUG_TYPE was not 'sde' and inserted
code into common.mk that affirmatively filters out -lmemkind from
LDFLAGS if DEBUG_TYPE is 'sde'. (Thanks to Dave Love for reporting
this issue.) Other minor cleanups to neighboring code in common.mk.
- Updated CRVECFLAGS in knl/make_defs.mk to be based on -march=knl,
and then AVX-512 functionality is manually removed via various
-mno-avx512* flags. Also, make the setting of CRVECFLAGS conditional
on CC_VENDOR. Similar change to skx/make_defs.mk.
- Comment/whitespace updates.
Details:
- Renamed CVECFLAGS variables in sub-configurations' make_defs.mk files
to CKVECFLAGS.
- Added default defintions of two new make variables to most sub-
configurations' make_defs.mk files--CROPTFLAGS and CRVECFLAGS--
which correspond to reference kernel analogues of the CKOPTFLAGS
and CKVECFLAGS, which track optimization and vectorization flags for
optimized kernels. Currently, two sub-configurations (knl and skx)
explicitly set CRVECFLAGS to non-default values (using AVX2 instead of
AVX-512 for reference kernels. Thanks to Jeff Hammond, whose feedback
prompted me to make this change (issue #187).
- Changed common.mk so that the get-refkern-cflags-for function returns
the flags associated with the given sub-configuration's CROPTFLAGS
and CRVECFLAGS (instead of CKOPTFLAGS and CKVECFLAGS).
Details:
- Reorganized linker-related section of common.mk so that LDFLAGS set
in a sub-configuration's make_defs.mk file will not be immediately
(and erroneously) overridden by the default values.
- Re-enabled redirected (to file) output of the testsuite when run from
the top-level Makefile via 'make test'. (For some reason, it was
commented-out for the non-verbose case.)
- Removed old/unnecessary code from the make_defs.mk files of skx and
knl sub-configurations.
Details:
- Rewrote code that selects the compiler for the purposes of compiling
the auto-detection executable. CC (if specified) is tried first. Then
gcc. Then clang. The absolute fallback is cc. The previous code was
sort of broken, and seemed to unintentionally always use gcc.
- Moved various configuration-agnostic flags from config/*/make_defs.mk
files to common.mk. The new mechanism appends the configuration-
agnostic flags to the various compiler flag variables initialized in
make_defs.mk. Flags specific to the sub-configuration are still set
in make_defs.mk.
- Added -Wno-tautological-compare to CMISCFLAGS when clang is in use.
Also added the flag to the compiler instantiation during configure-
time hardware detection (when clang is selected).
- Added some missing (but mostly-optional) quotes to configure script.
