Details:
- Added cpp macros to trmm and trmm3 front-ends to optionally force
those operations to be cast so the structured matrix is on the left.
symm and hemm already had such macros, but these too were renamed so
that the macros were individual to the operation. We now have four
such macros:
#define BLIS_DISABLE_HEMM_RIGHT
#define BLIS_DISABLE_SYMM_RIGHT
#define BLIS_DISABLE_TRMM_RIGHT
#define BLIS_DISABLE_TRMM3_RIGHT
Also, updated the comments in the symm and hemm front-ends related to
the first two macro guards, and added corresponding comments to the
trmm and trmm3 front-ends for the latter two guards. (They all
functionally do the same thing, just for their specific operations.)
Thanks to Jeff Hammond for reporting the bugs that led me to this
change (via #359).
- Updated config/old/haswellbb subconfiguration (used to debug issues
related to duplicating B during packing) to register: a packing
kernel for single-precision real; gemmbb ukernels for s, c, and z;
trsmbb ukernels for s, c, and z; gemmtrsmbb virtual ukrnels for s, c
and z; and to use non-default cache and register blocksizes for s, c,
and z datatypes. Also declared prototypes for all of the gemmbb,
trsmbb, and gemmtrsmbb ukernel functions within the
bli_cntx_init_haswellbb() function. This should, once applied to the
power9 configuration, fix the remaining issues in #359.
- Defined bli_spackm_6xk_bb4_ref(), which packs single reals with a
duplication factor of 4. This function is defined in the same file as
bli_dpackm_6xk_bb2_ref() (bli_packm_cxk_bb_ref.c).
Details:
- After merging PR #303, at Isuru's request, I removed the use of
BLIS_EXPORT_BLIS from all function prototypes *except* those that we
potentially wish to be exported in shared/dynamic libraries. In other
words, I removed the use of BLIS_EXPORT_BLIS from all prototypes of
functions that can be considered private or for internal use only.
This is likely the last big modification along the path towards
implementing the functionality spelled out in issue #248. Thanks
again to Isuru Fernando for his initial efforts of sprinkling the
export macros throughout BLIS, which made removing them where
necessary relatively painless. Also, I'd like to thank Tony Kelman,
Nathaniel Smith, Ian Henriksen, Marat Dukhan, and Matthew Brett for
participating in the initial discussion in issue #37 that was later
summarized and restated in issue #248.
- CREDITS file update.
* Revert "restore bli_extern_defs exporting for now"
This reverts commit 09fb07c350b2acee17645e8e9e1b8d829c73dca8.
* Remove symbols not intended to be public
* No need of def file anymore
* Fix whitespace
* No need of configure option
* Remove export macro from definitions
* Remove blas export macro from definitions
Details:
- Removed explicit reference to The University of Texas at Austin in the
third clause of the license comment blocks of all relevant files and
replaced it with a more all-encompassing "copyright holder(s)".
- Removed duplicate words ("derived") from a few kernels' license
comment blocks.
- Homogenized license comment block in kernels/zen/3/bli_gemm_small.c
with format of all other comment blocks.
Details:
- Removed four trailing spaces after "BLIS" that occurs in most files'
commented-out license headers.
- Added UT copyright lines to some files. (These files previously had
only AMD copyright lines but were contributed to by both UT and AMD.)
- In some files' copyright lines, expanded 'The University of Texas' to
'The University of Texas at Austin'.
- Fixed various typos/misspellings in some license headers.
Details:
- Defined a new struct datatype, rntm_t (runtime), to house the thrloop
field of the cntx_t (context). The thrloop array holds the number of
ways of parallelism (thread "splits") to extract per level-3
algorithmic loop until those values can be used to create a
corresponding node in the thread control tree (thrinfo_t structure),
which (for any given level-3 invocation) usually happens by the time
the macrokernel is called for the first time.
- Relocating the thrloop from the cntx_t remedies a thread-safety issue
when invoking level-3 operations from two or more application threads.
The race condition existed because the cntx_t, a pointer to which is
usually queried from the global kernel structure (gks), is supposed to
be a read-only. However, the previous code would write to the cntx_t's
thrloop field *after* it had been queried, thus violating its read-only
status. In practice, this would not cause a problem when a sequential
application made a multithreaded call to BLIS, nor when two or more
application threads used the same parallelization scheme when calling
BLIS, because in either case all application theads would be using
the same ways of parallelism for each loop. The true effects of the
race condition were limited to situations where two or more application
theads used *different* parallelization schemes for any given level-3
call.
- In remedying the above race condition, the application or calling
library can now specify the parallelization scheme on a per-call basis.
All that is required is that the thread encode its request for
parallelism into the rntm_t struct prior to passing the address of the
rntm_t to one of the expert interfaces of either the typed or object
APIs. This allows, for example, one application thread to extract 4-way
parallelism from a call to gemm while another application thread
requests 2-way parallelism. Or, two threads could each request 4-way
parallelism, but from different loops.
- A rntm_t* parameter has been added to the function signatures of most
of the level-3 implementation stack (with the most notable exception
being packm) as well as all level-1v, -1d, -1f, -1m, and -2 expert
APIs. (A few internal functions gained the rntm_t* parameter even
though they currently have no use for it, such as bli_l3_packm().)
This required some internal calls to some of those functions to
be updated since BLIS was already using those operations internally
via the expert interfaces. For situations where a rntm_t object is
not available, such as within packm/unpackm implementations, NULL is
passed in to the relevant expert interfaces. This is acceptable for
now since parallelism is not obtained for non-level-3 operations.
- Revamped how global parallelism is encoded. First, the conventional
environment variables such as BLIS_NUM_THREADS and BLIS_*_NT are only
read once, at library initialization. (Thanks to Nathaniel Smith for
suggesting this to avoid repeated calls getenv(), which can be slow.)
Those values are recorded to a global rntm_t object. Public APIs, in
bli_thread.c, are still available to get/set these values from the
global rntm_t, though now the "set" functions have additional logic
to ensure that the values are set in a synchronous manner via a mutex.
If/when NULL is passed into an expert API (meaning the user opted to
not provide a custom rntm_t), the values from the global rntm_t are
copied to a local rntm_t, which is then passed down the function stack.
Calling a basic API is equivalent to calling the expert APIs with NULL
for the cntx and rntm parameters, which means the semantic behavior of
these basic APIs (vis-a-vis multithreading) is unchanged from before.
- Renamed bli_cntx_set_thrloop_from_env() to bli_rntm_set_ways_for_op()
and reimplemented, with the function now being able to treat the
incoming rntm_t in a manner agnostic to its origin--whether it came
from the application or is an internal copy of the global rntm_t.
- Removed various global runtime APIs for setting the number of ways of
parallelism for individual loops (e.g. bli_thread_set_*_nt()) as well
as the corresponding "get" functions. The new model simplifies these
interfaces so that one must either set the total number of threads, OR
set all of the ways of parallelism for each loop simultaneously (in a
single function call).
- Updated sandbox/ref99 according to above changes.
- Rewrote/augmented docs/Multithreading.md to document the three methods
(and two specific ways within each method) of requesting parallelism
in BLIS.
- Removed old, disabled code from bli_l3_thrinfo.c.
- Whitespace changes to code (e.g. bli_obj.c) and docs/BuildSystem.md.
Details:
- Changed the way virtual microkernels are handled in the context.
Previously, there were query routines such as bli_cntx_get_l3_ukr_dt()
which returned the native ukernel for a datatype if the method was
equal to BLIS_NAT, or the virtual ukernel for that datatype if the
method was some other value. Going forward, the context native and
virtual ukernel slots will both be initialized to native ukernel
function pointers for native execution, and for non-native execution
the virtual ukernel pointer will be something else. This allows us
to always query the virtual ukernel slot (from within, say, the
macrokernel) without needing any logic in the query routine to decide
which function pointer (native or virtual) to return. (Essentially,
the logic has been shifted to init-time instead of compute-time.)
This scheme will also allow generalized virtual ukernels as a way
to insert extra logic in between the macrokernel and the native
microkernel.
- Initialize native contexts (in bli_cntx_ref.c) with native ukernel
function addresses stored to the virtual ukernel slots pursuant to
the above policy change.
- Renamed all static functions that were native/virtual-ambiguous, such
as bli_cntx_get_l3_ukr_dt() or bli_cntx_l3_ukr_prefers_cols_dt()
pursuant to the above polilcy change. Those routines now use the
substring "get_l3_vir_ukr" in their name instead of "get_l3_ukr". All
of these functions were static functions defined in bli_cntx.h, and
most uses were in level-3 front-ends and macrokernels.
- Deprecated anti_pref bool_t in context, along with related functions
such as bli_cntx_l3_ukr_eff_dislikes_storage_of(), now that 1m's
panel-block execution is disabled.
- Query pack schemas in level-3 bli_*_front() functions and store those
values in the schema bitfields of the correponding obj_t's when the
cntx's method is not BLIS_NAT. (When method is BLIS_NAT, the default
native schemas are stored to the obj_t's.)
- In bli_l3_cntl_create_if(), query the schemas stored to the obj_t's in
bli_*_front(), clear the schema bitfields, and pass the queried values
into bli_gemm_cntl_create() and bli_trsm_cntl_create().
- Updated APIs for bli_gemm_cntl_create() and bli_trsm_cntl_create() to
take schemas for A and B, and use these values to initialize the
appropriate control tree nodes. (Also cpp-disabled the panel-block cntl
tree creation variant, bli_gemmpb_cntl_create(), as it has not been
employed by BLIS in quite some time.)
- Simplified querying of schema in bli_packm_init() thanks to above
changes.
- Updated openmp and pthreads definitions of bli_l3_thread_decorator()
so that thread-local aliases of matrix operands are guaranteed, even
if aliasing is disabled within the internal back-end functions (e.g.
bli_gemm_int.c). Also added a comment to bli_thrcomm_single.c
explaining why the extra aliasing is not needed there.
- Change bli_gemm() and level-3 friends so that the operation's ind()
function is called only if all matrix operands have the same datatype,
and only if that datatype is complex. The former condition is needed
in preparation for work related to mixed domain operands, while the
latter helps with readability, especially for those who don't want to
venture into frame/ind.
- Reshuffled arguments in bli_cntx_set_thrloop_from_env() to be
consistent with BLIS calling conventions (modified argument(s) are
last), and updated all invocations in the level-3 _front() functions.
- Comment updates to bli_cntx_set_thrloop_from_env().
Details:
- Converted most C preprocessor macros in bli_param_macro_defs.h and
bli_obj_macro_defs.h to static functions.
- Reshuffled some functions/macros to bli_misc_macro_defs.h and also
between bli_param_macro_defs.h and bli_obj_macro_defs.h.
- Changed obj_t-initializing macros in bli_type_defs.h to static
functions.
- Removed some old references to BLIS_TWO and BLIS_MINUS_TWO from
bli_constants.h.
- Whitespace changes in select files (four spaces to single tab).
Details:
- Added a new configure option, --[en|dis]able-packbuf-pools, which will
enable or disable the use of internal memory pools for managing buffers
used for packing. When disabled, the function specified by the cpp
macro BLIS_MALLOC_POOL is called whenever a packing buffer is needed
(and BLIS_FREE_POOL is called when the buffer is ready to be released,
usually at the end of a loop). When enabled, which was the status quo
prior to this commit, a memory pool data structure is created and
managed to provide threads with packing buffers. The memory pool
minimizes calls to bli_malloc_pool() (i.e., the wrapper that calls
BLIS_MALLOC_POOL), but does so through a somewhat more complex
mechanism that may incur additional overhead in some (but not all)
situations. The new option defaults to --enable-packbuf-pools.
- Removed the reinitialization of the memory pools from the level-3
front-ends and replaced it with automatic reinitialization within the
pool API's implementation. This required an extra argument to
bli_pool_checkout_block() in the form of a requested size, but hides
the complexity entirely from BLIS. And since bli_pool_checkout_block()
is only ever called within a critical section, this change fixes a
potential race condition in which threads using contexts with different
cache blocksizes--most likely a heterogeneous environment--can check
out pool blocks that are too small for the submatrices it wishes to
pack. Thanks to Nisanth Padinharepatt for reporting this potential
issue.
- Removed several functions in light of the relocation of pool reinit,
including bli_membrk_reinit_pools(), bli_memsys_reinit(),
bli_pool_reinit_if(), and bli_check_requested_block_size_for_pool().
- Updated the testsuite to print whether the memory pools are enabled or
disabled.
Details:
- Defined two new functions in bli_init.c: bli_init_once() and
bli_finalize_once(). Each is implemented with pthread_once(), which
guarantees that, among the threads that pass in the same pthread_once_t
data structure, exactly one thread will execute a user-defined function.
(Thus, there is now a runtime dependency against libpthread even when
multithreading is not enabled at configure-time.)
- Added calls to bli_init_once() to top-level user APIs for all
computational operations as well as many other functions in BLIS to
all but guarantee that BLIS will self-initialize through the normal
use of its functions.
- Rewrote and simplified bli_init() and bli_finalize() and related
functions.
- Added -lpthread to LDFLAGS in common.mk.
- Modified the bli_init_auto()/_finalize_auto() functions used by the
BLAS compatibility layer to take and return no arguments. (The
previous API that tracked whether BLIS was initialized, and then
only finalized if it was initialized in the same function, was too
cute by half and borderline useless because by default BLIS stays
initialized when auto-initialized via the compatibility layer.)
- Removed static variables that track initialization of the sub-APIs in
bli_const.c, bli_error.c, bli_init.c, bli_memsys.c, bli_thread, and
bli_ind.c. We don't need to track initialization at the sub-API level,
especially now that BLIS can self-initialize.
- Added a critical section around the changing of the error checking
level in bli_error.c.
- Deprecated bli_ind_oper_has_avail() as well as all functions
bli_<opname>_ind_get_avail(), where <opname> is a level-3 operation
name. These functions had no use cases within BLIS and likely none
outside of BLIS.
- Commented out calls to bli_init() and bli_finalize() in testsuite's
main() function, and likewise for standalone test drivers in 'test'
directory, so that self-initialization is exercised by default.
Details:
- Removed the family field inside the cntx_t struct and re-added it to the
cntl_t struct. Updated all accessor functions/macros accordingly, as well
as all consumers and intermediaries of the family parameter (such as
bli_l3_thread_decorator(), bli_l3_direct(), and bli_l3_prune_*()). This
change was motivated by the desire to keep the context limited, as much
as possible, to information about the computing environment. (The family
field, by contrast, is a descriptor about the operation being executed.)
- Added additional functions to bli_blksz_*() API.
- Added additional functions to bli_cntx_*() API.
- Minor updates to bli_func.c, bli_mbool.c.
- Removed 'obj' from bli_blksz_*() API names.
- Removed 'obj' from bli_cntx_*() API names.
- Removed 'obj' from bli_cntl_*(), bli_*_cntl_*() API names. Renamed routines
that operate only on a single struct to contain the "_node" suffix to
differentiate with those routines that operate on the entire tree.
- Added enums for packm and unpackm kernels to bli_type_defs.h.
- Removed BLIS_1F and BLIS_VF from bszid_t definition in bli_type_defs.h.
They weren't being used and probably never will be.
- Number of threads is determined by BLIS_NUM_THREADS or OMP_NUM_THREADS, but can be overridden by BLIS_XX_NT as before.
- Threads are assigned to loops (ic, jc, ir, and jc) automatically by weighted partitioning and heuristics, both of which are tunable via bli_kernel.h.
- All level-3 BLAS covered.
Details:
- Implemented Ricardo Magana's distributed thread info/communicator
management. Rather that fully construct the thrinfo_t structures, from
root to leaf, prior to spawning threads, the threads individually
construct their thrinfo_t trees (or, chains), and do so incrementally,
as needed, reusing the same structure nodes during subsequent blocked
variant iterations. This required moving the initial creation of the
thrinfo_t structure (now, the root nodes) from the _front() functions
to the bli_l3_thread_decorator(). The incremental "growing" of the tree
is performed in the internal back-end (ie: _int()) function, and so
mostly invisible. Also, the incremental growth of the thrinfo_t tree is
done as a function of the current and parent control tree nodes (as well
as the parent thrinfo_t node), further reinforcing the parallel
relationship between the two data structures.
- Removed the "inner" communicator from thrinfo_t structure definition,
as well as its id. Changed all APIs accordingly. Renamed
bli_thrinfo_needs_free_comms() to bli_thrinfo_needs_free_comm().
- Defined bli_l3_thrinfo_print_paths(), which prints the information
in an array of thrinfo_t* structure pointers. (Used only as a
debugging/verification tool.)
- Deprecated the following thrinfo_t creation functions:
bli_packm_thrinfo_create()
bli_l3_thrinfo_create()
because they are no longer used. bli_thrinfo_create() is now called
directly when creating thrinfo_t nodes.
Details:
- Altered control tree node struct definitions so that all nodes have the
same struct definition, whose primary fields consist of a blocksize id,
a variant function pointer, a pointer to an optional parameter struct,
and a pointer to a (single) sub-node. This unified control tree type is
now named cntl_t.
- Changed the way control tree nodes are connected, and what computation
they represent, such that, for example, packing operations are now
associated with nodes that are "inline" in the tree, rather than off-
shoot braches. The original tree for the classic Goto gemm algorithm was
expressed (roughly) as:
blk_var2 -> blk_var3 -> blk_var1 -> ker_var2
| |
-> packb -> packa
and now, the same tree would look like:
blk_var2 -> blk_var3 -> packb -> blk_var1 -> packa -> ker_var2
Specifically, the packb and packa nodes perform their respective packing
operations and then recurse (without any loop) to a subproblem. This means
there are now two kinds of level-3 control tree nodes: partitioning and
non-partitioning. The blocked variants are members of the former, because
they iteratively partition off submatrices and perform suboperations on
those partitions, while the packing variants belong to the latter group.
(This change has the effect of allowing greatly simplified initialization
of the nodes, which previously involved setting many unused node fields to
NULL.)
- Changed the way thrinfo_t tree nodes are arranged to mirror the new
connective structure of control trees. That is, packm nodes are no longer
off-shoot branches of the main algorithmic nodes, but rather connected
"inline".
- Simplified control tree creation functions. Partitioning nodes are created
concisely with just a few fields needing initialization. By contrast, the
packing nodes require additional parameters, which are stored in a
packm-specific struct that is tracked via the optional parameters pointer
within the control tree struct. (This parameter struct must always begin
with a uint64_t that contains the byte size of the struct. This allows
us to use a generic function to recursively copy control trees.) gemm,
herk, and trmm control tree creation continues to be consolidated into
a single function, with the operation family being used to select
among the parameter-agnostic macro-kernel wrappers. A single routine,
bli_cntl_free(), is provided to free control trees recursively, whereby
the chief thread within a groups release the blocks associated with
mem_t entries back to the memory broker from which they were acquired.
- Updated internal back-ends, e.g. bli_gemm_int(), to query and call the
function pointer stored in the current control tree node (rather than
index into a local function pointer array). Before being invoked, these
function pointers are first cast to a gemm_voft (for gemm, herk, or trmm
families) or trsm_voft (for trsm family) type, which is defined in
frame/3/bli_l3_var_oft.h.
- Retired herk and trmm internal back-ends, since all execution now flows
through gemm or trsm blocked variants.
- Merged forwards- and backwards-moving variants by querying the direction
from routines as a function of the variant's matrix operands. gemm and
herk always move forward, while trmm and trsm move in a direction that
is dependent on which operand (a or b) is triangular.
- Added functions bli_thread_get_range_mdim(), bli_thread_get_range_ndim(),
each of which takes additional arguments and hides complexity in managing
the difference between the way ranges are computed for the four families
of operations.
- Simplified level-3 blocked variants according to the above changes, so that
the only steps taken are:
1. Query partitioning direction (forwards or backwards).
2. Prune unreferenced regions, if they exist.
3. Determine the thread partitioning sub-ranges.
<begin loop>
4. Determine the partitioning blocksize (passing in the partitioning
direction)
5. Acquire the curren iteration's partitions for the matrices affected
by the current variants's partitioning dimension (m, k, n).
6. Call the subproblem.
<end loop>
- Instantiate control trees once per thread, per operation invocation.
(This is a change from the previous regime in which control trees were
treated as stateless objects, initialized with the library, and shared
as read-only objects between threads.) This once-per-thread allocation
is done primarily to allow threads to use the control tree as as place
to cache certain data for use in subsequent loop iterations. Presently,
the only application of this caching is a mem_t entry for the packing
blocks checked out from the memory broker (allocator). If a non-NULL
control tree is passed in by the (expert) user, then the tree is copied
by each thread. This is done in bli_l3_thread_decorator(), in
bli_thrcomm_*.c.
- Added a new field to the context, and opid_t which tracks the "family"
of the operation being executed. For example, gemm, hemm, and symm are
all part of the gemm family, while herk, syrk, her2k, and syr2k are
all part of the herk family. Knowing the operation's family is necessary
when conditionally executing the internal (beta) scalar reset on on
C in blocked variant 3, which is needed for gemm and herk families,
but must not be performed for the trmm family (because beta has only
been applied to the current row-panel of C after the first rank-kc
iteration).
- Reexpressed 3m3 induced method blocked variant in frame/3/gemm/ind
to comform with the new control tree design, and renamed the macro-
kernel codes corresponding to 3m2 and 4m1b.
- Renamed bli_mem.c (and its APIs) to bli_memsys.c, and renamed/relocated
bli_mem_macro_defs.h from frame/include to frame/base/bli_mem.h.
- Renamed/relocated bli_auxinfo_macro_defs.h from frame/include to
frame/base/bli_auxinfo.h.
- Fixed a minor bug whereby the storage-to-ukr-preference matching
optimization in the various level-3 front-ends was not being applied
properly when the context indicated that execution would be via an
induced method. (Before, we always checked the native micro-kernel
corresponding to the datatype being executed, whereas now we check
the native micro-kernel corresponding to the datatype's real projection,
since that is the micro-kernel that is actually used by induced methods.
- Added an option to the testsuite to skip the testing of native level-3
complex implementations. Previously, it was always tested, provided that
the c/z datatypes were enabled. However, some configurations use
reference micro-kernels for complex datatypes, and testing these
implementations can slow down the testsuite considerably.
Details:
- These changes constitute the first set of changes in preparation to
revamping the structure and use of control trees in BLIS. Modifications
in this commit don't affect the control tree code yet, but rather lay
the groundwork.
- Defined wrappers for the following functions, where the the wrappers
each take a direction parameter of a new enumerated type (BLIS_BWD or
BLIS_FWD), dir_t, and executes the correct underlying function.
- bli_acquire_mpart_*() and _vpart_*()
- bli_*_determine_kc_[fb]()
- bli_thread_get_range_*() and bli_thread_get_range_weighted_*()
- Consolidated all 'f' (forwards-moving) and 'b' (backwards-moving)
blocked variants for trmm and trsm, and renamed gemm and herk variants
accordingly. The direction is now queried via routines such as
bli_trmm_direct(), which deterines the direction from the implied side
and uplo parameters. For gemm and herk, it is uncondtionally BLIS_FWD.
- Defined wrappers to parameter-specific macrokernels for herk, trmm, and
trsm, e.g. bli_trmm_xx_ker_var2(), that execute the correct underlying
macrokernel based on the implied parameters. The same logic used to
choose the dir_t in _direct() functions is used here.
- Simplified the function pointer arrays in _int() functions given the
consolidation and dir_t querying mentioned above.
- Function signature (whitespace) reformatting for various functions.
- Removed old code in various 'old' directories.
Details:
- Reorganized code and renamed files defining APIs related to multithreading.
All code that is not specific to a particular operation is now located in a
new directory: frame/thread. Code is now organized, roughly, by the
namespace to which it belongs (see below).
- Consolidated all operation-specific *_thrinfo_t object types into a single
thrinfo_t object type. Operation-specific level-3 *_thrinfo_t APIs were
also consolidated, leaving bli_l3_thrinfo_*() and bli_packm_thrinfo_*()
functions (aside from a few general purpose bli_thrinfo_*() functions).
- Renamed thread_comm_t object type to thrcomm_t.
- Renamed many of the routines and functions (and macros) for multithreading.
We now have the following API namespaces:
- bli_thrinfo_*(): functions related to thrinfo_t objects
- bli_thrcomm_*(): functions related to thrcomm_t objects.
- bli_thread_*(): general-purpose functions, such as initialization,
finalization, and computing ranges. (For now, some macros, such as
bli_thread_[io]broadcast() and bli_thread_[io]barrier() use the
bli_thread_ namespace prefix, even though bli_thrinfo_ may be more
appropriate.)
- Renamed thread-related macros so that they use a bli_ prefix.
- Renamed control tree-related macros so that they use a bli_ prefix (to be
consistent with the thread-related macros that were also renamed).
- Removed #undef BLIS_SIMD_ALIGN_SIZE from dunnington's bli_kernel.h. This
#undef was a temporary fix to some macro defaults which were being applied
in the wrong order, which was recently fixed.
Details:
- Retrofitted a new data structure, known as a context, into virtually
all internal APIs for computational operations in BLIS. The structure
is now present within the type-aware APIs, as well as many supporting
utility functions that require information stored in the context. User-
level object APIs were unaffected and continue to be "context-free,"
however, these APIs were duplicated/mirrored so that "context-aware"
APIs now also exist, differentiated with an "_ex" suffix (for "expert").
These new context-aware object APIs (along with the lower-level, type-
aware, BLAS-like APIs) contain the the address of a context as a last
parameter, after all other operands. Contexts, or specifically, cntx_t
object pointers, are passed all the way down the function stack into
the kernels and allow the code at any level to query information about
the runtime, such as kernel addresses and blocksizes, in a thread-
friendly manner--that is, one that allows thread-safety, even if the
original source of the information stored in the context changes at
run-time; see next bullet for more on this "original source" of info).
(Special thanks go to Lee Killough for suggesting the use of this kind
of data structure in discussions that transpired during the early
planning stages of BLIS, and also for suggesting such a perfectly
appropriate name.)
- Added a new API, in frame/base/bli_gks.c, to define a "global kernel
structure" (gks). This data structure and API will allow the caller to
initialize a context with the kernel addresses, blocksizes, and other
information associated with the currently active kernel configuration.
The currently active kernel configuration within the gks cannot be
changed (for now), and is initialized with the traditional cpp macros
that define kernel function names, blocksizes, and the like. However,
in the future, the gks API will be expanded to allow runtime management
of kernels and runtime parameters. The most obvious application of this
new infrastructure is the runtime detection of hardware (and the
implied selection of appropriate kernels). With contexts in place,
kernels may even be "hot swapped" at runtime within the gks. Once
execution enters a level-3 _front() function, the memory allocator will
be reinitialized on-the-fly, if necessary, to accommodate the new
kernels' blocksizes. If another application thread is executing with
another (previously loaded) kernel, it will finish in a deterministic
fashion because its kernel information was loaded into its context
before computation began, and also because the blocks it checked out
from the internal memory pools will be unaffected by the newer threads'
reinitialization of the allocator.
- Reorganized and streamlined the 'ind' directory, which contains much of
the code enabling use of induced methods for complex domain matrix
multiplication; deprecated bli_bsv_query.c and bli_ukr_query.c, as
those APIs' functionality is now mostly subsumed within the global
kernel structure.
- Updated bli_pool.c to define a new function, bli_pool_reinit_if(),
that will reinitialize a memory pool if the necessary pool block size
has increased.
- Updated bli_mem.c to use bli_pool_reinit_if() instead of
bli_pool_reinit() in the definition of bli_mem_pool_init(), and placed
usage of contexts where appropriate to communicate cache and register
blocksizes to bli_mem_compute_pool_block_sizes().
- Simplified control trees now that much of the information resides in
the context and/or the global kernel structure:
- Removed blocksize object pointers (blksz_t*) fields from all control
tree node definitions and replaced them with blocksize id (bszid_t)
values instead, which may be passed into a context query routine in
order to extract the corresponding blocksize from the given context.
- Removed micro-kernel function pointers (func_t*) fields from all
control tree node definitions. Now, any code that needs these function
pointers can query them from the local context, as identified by a
level-3 micro-kernel id (l3ukr_t), level-1f kernel id, (l1fkr_t), or
level-1v kernel id (l1vkr_t).
- Removed blksz_t object creation and initialization, as well as kernel
function object creation and initialization, from all operation-
specific control tree initialization files (bli_*_cntl.c), since this
information will now live in the gks and, secondarily, in the context.
- Removed blocksize multiples from blksz_t objects. Now, we track
blocksize multiples for each blocksize id (bszid_t) in the context
object.
- Removed the bool_t's that were required when a func_t was initialized.
These bools are meant to allow one to track the micro-kernel's storage
preferences (by rows or columns). This preference is now tracked
separately within the gks and contexts.
- Merged and reorganized many separate-but-related functions into single
files. This reorganization affects frame/0, 1, 1d, 1m, 1f, 2, 3, and
util directories, but has the most obvious effect of allowing BLIS
to compile noticeably faster.
- Reorganized execution paths for level-1v, -1d, -1m, and -2 operations
in an attempt to reduce overhead for memory-bound operations. This
includes removal of default use of object-based variants for level-2
operations. Now, by default, level-2 operations will directly call a
low-level (non-object based) loop over a level-1v or -1f kernel.
- Converted many common query functions in blk_blksz.c (renamed from
bli_blocksize.c) and bli_func.c into cpp macros, now defined in their
respective header files.
- Defined bli_mbool.c API to create and query "multi-bools", or
heterogeneous bool_t's (one for each floating-point datatype), in the
same spirit as blksz_t and func_t.
- Introduced two key parameters of the hardware: BLIS_SIMD_NUM_REGISTERS
and BLIS_SIMD_SIZE. These values are needed in order to compute a third
new parameter, which may be set indirectly via the aforementioned
macros or directly: BLIS_STACK_BUF_MAX_SIZE. This value is used to
statically allocate memory in macro-kernels and the induced methods'
virtual kernels to be used as temporary space to hold a single
micro-tile. These values are now output by the testsuite. The default
value of BLIS_STACK_BUF_MAX_SIZE is computed as
"2 * BLIS_SIMD_NUM_REGISTERS * BLIS_SIMD_SIZE".
- Cleaned up top-level 'kernels' directory (for example, renaming the
embarrassingly misleading "avx" and "avx2" directories to "sandybridge"
and "haswell," respectively, and gave more consistent and meaningful
names to many kernel files (as well as updating their interfaces to
conform to the new context-aware kernel APIs).
- Updated the testsuite to query blocksizes from a locally-initialized
context for test modules that need those values: axpyf, dotxf,
dotxaxpyf, gemm_ukr, gemmtrsm_ukr, and trsm_ukr.
- Reformatted many function signatures into a standard format that will
more easily facilitate future API-wide changes.
- Updated many "mxn" level-0 macros (ie: those used to inline double loops
for level-1m-like operations on small matrices) in frame/include/level0
to use more obscure local variable names in an effort to avoid variable
shaddowing. (Thanks to Devin Matthews for pointing these gcc warnings,
which are only output using -Wshadow.)
- Added a conj argument to setm, so that its interface now mirrors that
of scalm. The semantic meaning of the conj argument is to optionally
allow implicit conjugation of the scalar prior to being populated into
the object.
- Deprecated all type-aware mixed domain and mixed precision APIs. Note
that this does not preclude supporting mixed types via the object APIs,
where it produces absolutely zero API code bloat.
Details:
- Fixed some bugs that only manifested in multithreaded instances of
some (non-gemm) level-3 operations. The bugs were related to invalid
allocation of "edge" cases to thread subpartitions. (Here, we define
an "edge" case to be one where the dimension being partitioned for
parallelism is not a whole multiple of whatever register blocksize
is needed in that dimension.) In BLIS, we always require edge cases
to be part of the bottom, right, or bottom-right subpartitions.
(This is so that zero-padding only has to happen at the bottom, right,
or bottom-right edges of micro-panels.) The previous implementations
of bli_get_range() and _get_range_weighted() did not adhere to this
implicit policy and thus produced bad ranges for some combinations of
operation, parameter cases, problem sizes, and n-way parallelism.
- As part of the above fix, the functions bli_get_range() and
_get_range_weighted() have been renamed to use _l2r, _r2l, _t2b,
and _b2t suffixes, similar to the partitioning functions. This is
an easy way to make sure that the variants are calling the right
version of each function. The function signatures have also been
changed slightly.
- Comment/whitespace updates.
- Removed unnecessary '/' from macros in bli_obj_macro_defs.h.
Details:
- Consolidated most of the code relating to induced complex methods
(e.g. 4mh, 4m1, 3mh, 3m1, etc.) into frame/ind. Induced methods
are now enabled on a per-operation basis. The current "available"
(enabled and implemented) implementation can then be queried on
an operation basis. Micro-kernel func_t objects as well as blksz_t
objects can also be queried in a similar maner.
- Redefined several micro-kernel and operation-related functions in
bli_info_*() API, in accordance with above changes.
- Added mr and nr fields to blksz_t object, which point to the mr
and nr blksz_t objects for each cache blocksize (and are NULL for
register blocksizes). Renamed the sub-blocksize field "sub" to
"mult" since it is really expressing a blocksize multiple.
- Updated bli_*_determine_kc_[fb]() for gemm/hemm/symm, trmm, and
trsm to correctly query mr and nr (for purposes of nudging kc).
- Introduced an enumerated opid_t in bli_type_defs.h that uniquely
identifies an operation. For now, only level-3 id values are defined,
along with a generic, catch-all BLIS_NOID value.
- Reworked testsuite so that all induced methods that are enabled
are tested (one at a time) rather than only testing the first
available method.
- Reformated summary at the beginning of testsuite output so that
blocksize and micro-kernel info is shown for each induced method
that was requested (as well as native execution).
- Reduced the number of columns needed to display non-matlab
testsuite output (from approx. 90 to 80).
Details:
- Renamed all remaining 3m/4m packing files and symbols to 3mi/4mi
('i' for "interleaved"). Similar changes to 3M/4M macros.
- Renamed all 3m/4m files and functions to 3m1/4m1.
- Whitespace changes.
Details:
- Added a new function, bli_gemm_cntl_ukrs(), that returns the func_t*
for the gemm micro-kernels from the leaf node of the control tree.
This allows all the func_t* fields from higher-level nodes in the tree
to be NULL, which makes the function that builds the control trees
slightly easier to read.
- Call bli_gemm_cntl_ukrs() instead of the cntl_gemm_ukrs() macro in
all bli_*_front() functions (which is needed to apply the row/column
preference optimization).
- In all level-3 bli_*_cntl_init() functions, changed the _obj_create()
function arguments corresponding to the gemm_ukrs fields in higher-
level cntl tree nodes to NULL.
- Removed some old her2k macro-kernels.
Details:
- Added optional flop counting to all level-3 front-ends, which is
enabled via BLIS_ENABLE_FLOP_COUNT. The flop count can be
reset at any time via bli_flop_count_reset() and queried via
bli_flop_count(). Caveats:
- flop counts are approximate for her[2]k, syr[2]k, trmm, and
trsm operations;
- flop counts ignore extra flops due to non-unit alpha;
- flop counts do not account for situations where beta is zero.
Details:
- Added "4mh" and "3mh" APIs, which implement the 4m and 3m methods at
high levels, respectively. APIs for trmm and trsm were NOT added due
to the fact that these approaches are inherently incompatible with
implementing 4m or 3m at high levels (because the input right-hand
side matrix is overwritten).
- Added 4mh, 3mh virtual micro-kernels, and updated the existing 4m and
3m so that all are stylistically consistent.
- Added new "rih" packing kernels (both low-level and structure-aware)
to support both 4mh and 3mh.
- Defined new pack_t schemas to support real-only, imaginary-only, and
real+imaginary packing formats.
- Added various level0 scalar macros to support the rih packm kernels.
- Minor tweaks to trmm macro-kernels to facilitate 4mh and 3mh.
- Added the ability to enable/disable 4mh, 3m, and 3mh, and adjusted
level-3 front-ends to check enabledness of 3mh, 3m, 4mh, and 4m (in
that order) and execute the first one that is enabled, or the native
implementation if none are enabled.
- Added implementation query functions for each level-3 operation so
that the user can query a string that describes the implementation
that is currently enabled.
- Updated test suite to output implementation types for reach level-3
operation, as well as micro-kernel types for each of the five micro-
kernels.
- Renamed BLIS_ENABLE_?COMPLEX_VIA_4M macros to _ENABLE_VIRTUAL_?COMPLEX.
- Fixed an obscure bug when packing Hermitian matrices (regular packing
type) whereby the diagonal elements of the packed micro-panels could
get tainted if the source matrix's imaginary diagonal part contained
garbage.
Details:
- Replaced all trmm_t control tree instances and usage with that of
gemm_t. This change is similar to the recent retirement of the herk_t
control tree.
- Tweaked packm blocked variants so that the triangular code does NOT
assume that k is a multiple of MR (when A is triangular) or NR (when
B is triangular). This means that bottom-right micro-panels packed for
trmm will have different zero-padding when k is not already a multiple
of the relevant register blocksize. While this creates a seemingly
arbitrary and unnecessary distinction between trmm and trsm packing,
it actually allows trmm to be handled with one control tree, instead
of one for left and one for right side cases. Furthermore, since only
one tree is required, it can now be handled by the gemm tree, and thus
the trmm control tree definitions can be disposed of entirely.
- Tweaked trmm macro-kernels so that they do NOT inflate k up to a
multiple of MR (when A is triangular) or NR (when B is triangular).
- Misc. tweaks and cleanups to bli_packm_struc_cxk_4m.c and _3m.c, some
of which are to facilitate above-mentioned changes whereby k is no
longer required to be a multiple of register blocksize when packing
triangular micro-panels.
- Adjusted trmm3 according to above changes.
- Retired trmm_t control tree creation/initialization functions.
Details:
- Added an extra layer to level-3 front-ends (examples: bli_gemm_entry()
and bli_gemm4m_entry()) to hide the control trees from the code that
decides whether to execute native or 4m-based implementations. The
layering was also applied to 3m.
- Branch to 4m code based on the return value of bli_4m_is_enabled(),
rather than the cpp macros BLIS_ENABLE_?COMPLEX_VIA_4M. This lays
the groundwork for users to be able to change at runtime which
implementation is called by the main front-ends (e.g. bli_gemm()).
- Retired some experimental gemm code that hadn't been touched in
months.
Details:
- Added the ability for the kernel developer to indicate the gemm micro-
kernel as having a preference for accessing the micro-tile of C via
contiguous rows (as opposed to contiguous columns). This property may
be encoded in bli_kernel.h as BLIS_?GEMM_UKERNEL_PREFERS_CONTIG_ROWS,
which may be defined or left undefined. Leaving it undefined leads to
the default assumption of column preference.
- Changed conditionals in frame/3/*/*_front.c that induce transposition
of the operation so that the transposition is induced only if there
is disagreement between the storage of C and the preference of the
micro-kernel. Previously, the only conditional that needed to be met
was that C was row-stored, which is to say that we assumed the micro-
kernel preferred column-contiguous access on C.
- Added a "prefers_contig_rows" property to func_t objects, and updated
calls to bli_func_obj_create() in _cntl.c files in order to support
the above changes.
- Removed the row-storage optimization from bli_trsm_front.c because
it is actually ineffective. This is because the right-side case of
trsm flips the A and B micro-panel operands (since BLIS only requires
left-side gemmtrsm/trsm kernels), meaning any transposition done
at the high level is then undone at the low level.
- Tweaked trmm, trmm3 _front.c files to eliminate a possible redundant
invocation of the bli_obj_swap() macro.
Details:
- Updated copyright headers to include "at Austin" in the name of the
University of Texas.
- Updated the copyright years of a few headers to 2014 (from 2011 and
2012).
Details:
- Standard names for reference kernels (levels-1v, -1f and 3) are now
macro constants. Examples:
BLIS_SAXPYV_KERNEL_REF
BLIS_DDOTXF_KERNEL_REF
BLIS_ZGEMM_UKERNEL_REF
- Developers no longer have to name all datatype instances of a kernel
with a common base name; [sdcz] datatype flavors of each kernel or
micro-kernel (level-1v, -1f, or 3) may now be named independently.
This means you can now, if you wish, encode the datatype-specific
register blocksizes in the name of the micro-kernel functions.
- Any datatype instances of any kernel (1v, 1f, or 3) that is left
undefined in bli_kernel.h will default to the corresponding reference
implementation. For example, if BLIS_DGEMM_UKERNEL is left undefined,
it will be defined to be BLIS_DGEMM_UKERNEL_REF.
- Developers no longer need to name level-1v/-1f kernels with multiple
datatype chars to match the number of types the kernel WOULD take in
a mixed type environment, as in bli_dddaxpyv_opt(). Now, one char is
sufficient, as in bli_daxpyv_opt().
- There is no longer a need to define an obj_t wrapper to go along with
your level-1v/-1f kernels. The framework now prvides a _kernel()
function which serves as the obj_t wrapper for whatever kernels are
specified (or defaulted to) via bli_kernel.h
- Developers no longer need to prototype their kernels, and thus no
longer need to include any prototyping headers from within
bli_kernel.h. The framework now generates kernel prototypes, with the
proper type signature, based on the kernel names defined (or defaulted
to) via bli_kernel.h.
- If the complex datatype x (of [cz]) implementation of the gemm micro-
kernel is left undefined by bli_kernel.h, but its same-precision real
domain equivalent IS defined, BLIS will use a 4m-based implementation
for the datatype x implementations of all level-3 operations, using
only the real gemm micro-kernel.
Details:
- Added the ability to induce complex domain level-3 operations via new
virtual complex micro-kernels which are implemented via only real
domain micro-kernels. Two new implementations are provided: 4m and 3m.
4m implements complex matrix multiplication in terms of four real
matrix multiplications, where as 3m uses only three and thus is
capable of even higher (than peak) performance. However, the 3m method
has somewhat weaker numerical properties, making it less desirable
in general.
- Further refined packing routines, which were recently revamped, and
added packing functionality for 4m and 3m.
- Some modifications to trmm and trsm macro-kernels to facilitate indexing
into micro-panels which were packed for 4m/3m virtual kernels.
- Added 4m and 3m interfaces for each level-3 operation.
- Various other minor changes to facilitate 4m/3m methods.
Details:
- Added new _front() functions for each level-3 operation. This is done
so that the choosing of the control tree (and *only* the choosing of
the control tree) happens in what was previously the "front end"
(e.g. bli_gemm()). That control tree is then passed into the _front()
function, which then performs up-front tasks such as parameter
checking.
Details:
- Added infrastructure to support a new scalar representation, whereby
every object contains an internal scalar that defaults to 1.0. This
facilitates passing scalars around without having to house them in
separate objects. These "attached" scalars are stored in the internal
atom_t field of the obj_t struct, and are always stored to be the same
datatype as the object to which they are attached. Level-3 variants no
longer take scalar arguments, however, level-3 internal back-ends stll
do; this is so that the calling function can perform subproblems such
as C := C - alpha * A * B on-the-fly without needing to change either
of the scalars attached to A or B.
- Removed scalar argument from packm_int().
- Observe and apply attached scalars in scalm_int(), and removed scalar
from interface of scalm_unb_var1().
- Renamed the following functions (and corresponding invocations):
bli_obj_init_scalar_copy_of()
-> bli_obj_scalar_init_detached_copy_of()
bli_obj_init_scalar() -> bli_obj_scalar_init_detached()
bli_obj_create_scalar_with_attached_buffer()
-> bli_obj_create_1x1_with_attached_buffer()
bli_obj_scalar_equals() -> bli_obj_equals()
- Defined new functions:
bli_obj_scalar_detach()
bli_obj_scalar_attach()
bli_obj_scalar_apply_scalar()
bli_obj_scalar_reset()
bli_obj_scalar_has_nonzero_imag()
bli_obj_scalar_equals()
- Placed all bli_obj_scalar_* functions in a new file, bli_obj_scalar.c.
- Renamed the following macros:
bli_obj_scalar_buffer() -> bli_obj_buffer_for_1x1()
bli_obj_is_scalar() -> bli_obj_is_1x1()
- Defined new macros to set and copy internal scalars between objects:
bli_obj_set_internal_scalar()
bli_obj_copy_internal_scalar()
- In level-3 internal back-ends, added conditional blocks where alpha and
beta are checked for non-unit-ness. Those values for alpha and beta are
applied to the scalars attached to aliases of A/B/C, as appropriate,
before being passed into the variant specified by the control tree.
- In level-3 blocked variants, pass BLIS_ONE into subproblems instead of
alpha and/or beta.
- In level-3 macro-kernels, changed how scalars are obtained. Now, scalars
attached to A and B are multiplied together to obtain alpha, while beta
is obtained directly from C.
- In level-3 front-ends, removed old function calls meant to provide
future support for mixed domain/precision. These can be added back later
once that functionality is given proper treatment. Also, removed the
creating of copy-casts of alpha and beta since typecasting of scalars
is now implicitly handled in the internal back-ends when alpha and
beta are applied to the attached scalars.
Details:
- Removed does_scale field from packm control tree node and
bli_packm_cntl_obj_create() interface. Adjusted all invocations of
_cntl_obj_create() accordingly.
- Redefined/renamted macros that are used in aliasing so that now,
bli_obj_alias_to() does a full alias (shallow copy) while
bli_obj_alias_for_packing() does a partial alias that preserves the
pack_mem-related fields of the aliasing (destination) object.
- Removed bli_trmm3_cntl.c, .h after realizing that the trmm control tree
will work just fine for bli_trmm3().
- Removed some commented vestiges of the typecasting functionality needed
to support heterogeneous datatypes.
Details:
- Redefined dim_t and inc_t in terms of gint_t (instead of guint_t).
This will facilitate interoperability with Fortran in the future.
(Fortran does not support unsigned integers.)
- Redefined many instances of stride-related macros so that they return
or use the absolute value of the strides, rather than the raw strides
which may now be signed. Added new macros bli_is_row_stored_f() and
bli_is_col_stored_f(), which assume positive (forward-oriented) strides,
and changed the packm_blk_var[23] variants to use these macros instead
of the existing bli_is_row_stored(), bli_is_col_stored().
- Added/adjusted typecasting to to various functions/macros, including
bli_obj_alloc_buffer(), bli_obj_buffer_at_off(), and various pointer-
related macros in bli_param_macro_defs.h.
- Redefined bli_convert_blas_incv() macro so that the BLAS compatibility
layer properly handles situations where vector increments are negative.
Thanks to Vladimir Sukharev for pointing out this issue.
- Changed type of increment parameters in bli_adjust_strides() from dim_t
to inc_t. Likewise in bli_check_matrix_strides().
- Defined bli_check_matrix_object(), which checks for negative strides.
- Redefined bli_check_scalar_object() and bli_check_vector_object() so
that they also check for negative stride.
- Added instances of bli_check_matrix_object() to various operations'
_check routines.
Details:
- Moved the bli_init_safe() and bli_finalize_safe() function calls from the
BLAS-like BLIS layer to the BLAS compatibility layer. Having these auto-
initializers in the BLIS layer wasn't buying us anything because the user
could still call the library with uninitialized global scalar constants,
for example. Thus, we will just have to live with the constraint that
bli_init() MUST be called before calling ANY routine with a bli_ prefix.
- Added the missing _init_safe() and finalize_safe() calls to the level-1
BLAS compatibility wrappers.
Details:
- Fixed various warnings output by gcc 4.6.3-1, including removing some
set-but-not-used variables and addressing some instances of typecasting
of pointer types to integer types of different sizes.
Details:
- Implemented algorithmic optimizations for trmm and trsm whereby the right
side case is now handled explicitly, rather than induced indirectly by
transposing and swapping strides on operands. This allows us to walk through
the output matrix with favorable access patterns no matter how it is stored,
for all parameter combinations.
- Renamed trmm and trsm blocked variants so that there is no longer a
lower/upper distinction. Instead, we simply label the variants by which
dimension is partitioned and whether the variant marches forwards or
backwards through the corresponding partitioned operands.
- Added support for row-stored packing of lower and upper triangular matrices
(as provided by bli_packm_blk_var3.c).
- Fixed a performance bug in bli_determine_blocksize_b() whereby the cache
blocksize extensions (if non-zero) were not being used to appropriately size
the first iteration (ie: the bottom/right edge case).
- Updated comments in bli_kernel.h to indicate that both MC and NC must be
whole multiples of MR AND NR. This is needed for the case of trsm_r where,
in order to reuse existing left-side gemmtrsm fused micro-kernels, the
packing of A (left-hand operand) and B (right-hand operand) is done with
NR and MR, respectively (instead of MR and NR).
Details:
- Renamed the following macros:
bli_obj_set_trans() -> bli_obj_set_onlytrans()
bli_obj_trans_status() -> bli_obj_onlytrans_status()
to remove ambiguity as to which bits are read/updated.
Details:
- Revamped some parts of commit b6ef84fad1 by adding blocksize extension
fields to the blksz_t object rather than have them as separate structs.
- Updated all packm interfaces/invocations according to above change.
- Generalized bli_determine_blocksize_?() so that edge case optimization
happens if and only if cache blocksizes are created with non-zero
extensions.
- Updated comments in bli_kernel.h files to indicate that the edge case
blocksize extension mechanism is now available for use.
Details:
- Updated _cntl.c files for each level-3 operation to induce blocked
algorithms that first paritition in the n dimension with a blocksize
of NC. Typically this is not an issue since only very large problems
exceed that of NC. But developers often run very large problems, and
so this extra blocking should be the default.
- Removed some recently introduced but now unused macros from
bli_param_macro_defs.h.
Details:
- Made substantial changes throughout the framework to decouple the leading
dimension (row or column stride) used within each packed micro-panel from
the corresponding register blocksize. It appears advantageous on some
systems to use, for example, packed micro-panels of A where the column
stride is greater than MR (whereas previously it was always equal to MR).
- Changes include:
- Added BLIS_EXTEND_[MNK]R_? macros, which specify how much extra padding
to use when packing micro-panels of A and B.
- Adjusted all packing routines and macro-kernels to use PACKMR and PACKNR
where appropriate, instead of MR and NR.
- Added pd field (panel dimension) to obj_t.
- New interface to bli_packm_cntl_obj_create().
- Renamed bli_obj_packed_length()/_width() macros to
bli_obj_padded_length()/_width().
- Removed local #defines for cache/register blocksizes in level-3 *_cntl.c.
- Print out new cache and register blocksize extensions in test suite.
- Also added new BLIS_EXTEND_[MNK]C_? macros for future use in using a larger
blocksize for edge cases, which can improve performance at the margins.
Details:
- Changed all filename and function prefixes from 'bl2' to 'bli'.
- Changed the "blis2.h" header filename to "blis.h" and changed all
corresponding #include statements accordingly.
- Fixed incorrect association for Fran in CREDITS file.
