Details:
- Parallelism within the IC loop (3rd loop around the microkernel) is
now supported within the trsm operation. This is done via a new branch
on each of the control and thread trees, which guide execution of a
new trsm-only subproblem from within bli_trsm_blk_var1(). This trsm
subproblem corresponds to the macrokernel computation on only the
block of A that contains the diagonal (labeled as A11 in algorithms
with FLAME-like partitioning), and the corresponding row panel of C.
During the trsm subproblem, all threads within the JC communicator
participate and parallelize along the JR loop, including any
parallelism that was specified for the IC loop. (IR loop parallelism
is not supported for trsm due to inter-iteration dependencies.) After
this trsm subproblem is complete, a barrier synchronizes all
participating threads and then they proceed to apply the prescribed
BLIS_IC_NT (or equivalent) ways of parallelism (and any BLIS_JR_NT
parallelism specified within) to the remaining gemm subproblem (the
rank-k update that is performed using the newly updated row-panel of
B). Thus, trsm now supports JC, IC, and JR loop parallelism.
- Modified bli_trsm_l_cntl_create() to create the new "prenode" branch
of the trsm_l cntl_t tree. The trsm_r tree was left unchanged, for
now, since it is not currently used. (All trsm problems are cast in
terms of left-side trsm.)
- Updated bli_cntl_free_w_thrinfo() to be able to free the newly shaped
trsm cntl_t trees. Fixed a potentially latent bug whereby a cntl_t
subnode is only recursed upon if there existed a corresponding
thrinfo_t node, which may not always exist (for problems too small
to employ full parallelization due to the minimum granularity imposed
by micropanels).
- Updated other functions in frame/base/bli_cntl.c, such as
bli_cntl_copy() and bli_cntl_mark_family(), to recurse on sub-prenodes
if they exist.
- Updated bli_thrinfo_free() to recurse into sub-nodes and prenodes
when they exist, and added support for growing a prenode branch to
bli_thrinfo_grow() via a corresponding set of help functions named
with the _prenode() suffix.
- Added a bszid_t field thrinfo_t nodes. This field comes in handy when
debugging the allocation/release of thrinfo_t nodes, as it helps trace
the "identity" of each nodes as it is created/destroyed.
- Renamed
bli_l3_thrinfo_print_paths() -> bli_l3_thrinfo_print_gemm_paths()
and created a separate bli_l3_thrinfo_print_trsm_paths() function to
print out the newly reconfigured thrinfo_t trees for the trsm
operation.
- Trival changes to bli_gemm_blk_var?.c and bli_trsm_blk_var?.c
regarding variable declarations.
- Removed subpart_t enum values BLIS_SUBPART1T, BLIS_SUBPART1B,
BLIS_SUBPART1L, BLIS_SUBPART1R. Then added support for two new labels
(semantically speaking): BLIS_SUBPART1A and BLIS_SUBPART1B, which
represent the subpartition ahead of and behind, respectively,
BLIS_SUBPART1. Updated check functions in bli_check.c accordingly.
- Shuffled layering/APIs for bli_acquire_mpart_[mn]dim() and
bli_acquire_mpart_t2b/b2t(), _l2r/r2l().
- Deprecated old functions in frame/3/bli_l3_thrinfo.c.
Details:
- Removed explicit reference to The University of Texas at Austin in the
third clause of the license comment blocks of all relevant files and
replaced it with a more all-encompassing "copyright holder(s)".
- Removed duplicate words ("derived") from a few kernels' license
comment blocks.
- Homogenized license comment block in kernels/zen/3/bli_gemm_small.c
with format of all other comment blocks.
Details:
- Adjusted the method by which micropanels are assigned to threads in
the 2nd (jr) and 1st (ir) loops around the microkernel to (mostly)
employ contiguous "slab" partitioning rather than interleaved (round
robin) partitioning. The new partitioning schemes and related details
for specific families of operations are listed below:
- gemm: slab partitioning.
- herk: slab partitioning for region corresponding to non-triangular
region of C; round robin partitioning for triangular region.
- trmm: slab partitioning for region corresponding to non-triangular
region of B; round robin partitioning for triangular region.
(NOTE: This affects both left- and right-side macrokernels:
trmm_ll, trmm_lu, trmm_rl, trmm_ru.)
- trsm: slab partitioning.
(NOTE: This only affects only left-side macrokernels trsm_ll,
trsm_lu; right-side macrokernels were not touched.)
Also note that the previous macrokernels were preserved inside of
the 'other' directory of each operation family directory (e.g.
frame/3/gemm/other, frame/3/herk/other, etc).
- Updated gemm macrokernel in sandbox/ref99 in light of above changes
and fixed a stale function pointer type in blx_gemm_int.c
(gemm_voft -> gemm_var_oft).
- Added standalone test drivers in test/3m4m for herk, trmm, and trsm
and minor changes to test/3m4m/Makefile.
- Updated the arguments and definitions of bli_*_get_next_[ab]_upanel()
and bli_trmm_?_?r_my_iter() macros defined in bli_l3_thrinfo.h.
- Renamed bli_thread_get_range*() APIs to bli_thread_range*().
Details:
- Removed four trailing spaces after "BLIS" that occurs in most files'
commented-out license headers.
- Added UT copyright lines to some files. (These files previously had
only AMD copyright lines but were contributed to by both UT and AMD.)
- In some files' copyright lines, expanded 'The University of Texas' to
'The University of Texas at Austin'.
- Fixed various typos/misspellings in some license headers.
Details:
- Defined a new struct datatype, rntm_t (runtime), to house the thrloop
field of the cntx_t (context). The thrloop array holds the number of
ways of parallelism (thread "splits") to extract per level-3
algorithmic loop until those values can be used to create a
corresponding node in the thread control tree (thrinfo_t structure),
which (for any given level-3 invocation) usually happens by the time
the macrokernel is called for the first time.
- Relocating the thrloop from the cntx_t remedies a thread-safety issue
when invoking level-3 operations from two or more application threads.
The race condition existed because the cntx_t, a pointer to which is
usually queried from the global kernel structure (gks), is supposed to
be a read-only. However, the previous code would write to the cntx_t's
thrloop field *after* it had been queried, thus violating its read-only
status. In practice, this would not cause a problem when a sequential
application made a multithreaded call to BLIS, nor when two or more
application threads used the same parallelization scheme when calling
BLIS, because in either case all application theads would be using
the same ways of parallelism for each loop. The true effects of the
race condition were limited to situations where two or more application
theads used *different* parallelization schemes for any given level-3
call.
- In remedying the above race condition, the application or calling
library can now specify the parallelization scheme on a per-call basis.
All that is required is that the thread encode its request for
parallelism into the rntm_t struct prior to passing the address of the
rntm_t to one of the expert interfaces of either the typed or object
APIs. This allows, for example, one application thread to extract 4-way
parallelism from a call to gemm while another application thread
requests 2-way parallelism. Or, two threads could each request 4-way
parallelism, but from different loops.
- A rntm_t* parameter has been added to the function signatures of most
of the level-3 implementation stack (with the most notable exception
being packm) as well as all level-1v, -1d, -1f, -1m, and -2 expert
APIs. (A few internal functions gained the rntm_t* parameter even
though they currently have no use for it, such as bli_l3_packm().)
This required some internal calls to some of those functions to
be updated since BLIS was already using those operations internally
via the expert interfaces. For situations where a rntm_t object is
not available, such as within packm/unpackm implementations, NULL is
passed in to the relevant expert interfaces. This is acceptable for
now since parallelism is not obtained for non-level-3 operations.
- Revamped how global parallelism is encoded. First, the conventional
environment variables such as BLIS_NUM_THREADS and BLIS_*_NT are only
read once, at library initialization. (Thanks to Nathaniel Smith for
suggesting this to avoid repeated calls getenv(), which can be slow.)
Those values are recorded to a global rntm_t object. Public APIs, in
bli_thread.c, are still available to get/set these values from the
global rntm_t, though now the "set" functions have additional logic
to ensure that the values are set in a synchronous manner via a mutex.
If/when NULL is passed into an expert API (meaning the user opted to
not provide a custom rntm_t), the values from the global rntm_t are
copied to a local rntm_t, which is then passed down the function stack.
Calling a basic API is equivalent to calling the expert APIs with NULL
for the cntx and rntm parameters, which means the semantic behavior of
these basic APIs (vis-a-vis multithreading) is unchanged from before.
- Renamed bli_cntx_set_thrloop_from_env() to bli_rntm_set_ways_for_op()
and reimplemented, with the function now being able to treat the
incoming rntm_t in a manner agnostic to its origin--whether it came
from the application or is an internal copy of the global rntm_t.
- Removed various global runtime APIs for setting the number of ways of
parallelism for individual loops (e.g. bli_thread_set_*_nt()) as well
as the corresponding "get" functions. The new model simplifies these
interfaces so that one must either set the total number of threads, OR
set all of the ways of parallelism for each loop simultaneously (in a
single function call).
- Updated sandbox/ref99 according to above changes.
- Rewrote/augmented docs/Multithreading.md to document the three methods
(and two specific ways within each method) of requesting parallelism
in BLIS.
- Removed old, disabled code from bli_l3_thrinfo.c.
- Whitespace changes to code (e.g. bli_obj.c) and docs/BuildSystem.md.
Details:
- Removed the family field inside the cntx_t struct and re-added it to the
cntl_t struct. Updated all accessor functions/macros accordingly, as well
as all consumers and intermediaries of the family parameter (such as
bli_l3_thread_decorator(), bli_l3_direct(), and bli_l3_prune_*()). This
change was motivated by the desire to keep the context limited, as much
as possible, to information about the computing environment. (The family
field, by contrast, is a descriptor about the operation being executed.)
- Added additional functions to bli_blksz_*() API.
- Added additional functions to bli_cntx_*() API.
- Minor updates to bli_func.c, bli_mbool.c.
- Removed 'obj' from bli_blksz_*() API names.
- Removed 'obj' from bli_cntx_*() API names.
- Removed 'obj' from bli_cntl_*(), bli_*_cntl_*() API names. Renamed routines
that operate only on a single struct to contain the "_node" suffix to
differentiate with those routines that operate on the entire tree.
- Added enums for packm and unpackm kernels to bli_type_defs.h.
- Removed BLIS_1F and BLIS_VF from bszid_t definition in bli_type_defs.h.
They weren't being used and probably never will be.
Details:
- Removed thread barriers from the end of the loop bodies of
bli_gemm_blk_var1(), bli_gemm_blk_var2(), bli_trsm_blk_var1(),
and bli_trsm_blk_var2().
- Moved the thread barrier at the end of bli_packm_int() to the
end of bli_l3_packm(), and added missing barriers to that function.
- Removed the no longer necessary (and now incorrect) ochief guard
in bli_gemm3m3_packa() on the bli_obj_scalar_reset() on C.
- Thanks to Tyler Smith for help with these changes.
Details:
- Altered control tree node struct definitions so that all nodes have the
same struct definition, whose primary fields consist of a blocksize id,
a variant function pointer, a pointer to an optional parameter struct,
and a pointer to a (single) sub-node. This unified control tree type is
now named cntl_t.
- Changed the way control tree nodes are connected, and what computation
they represent, such that, for example, packing operations are now
associated with nodes that are "inline" in the tree, rather than off-
shoot braches. The original tree for the classic Goto gemm algorithm was
expressed (roughly) as:
blk_var2 -> blk_var3 -> blk_var1 -> ker_var2
| |
-> packb -> packa
and now, the same tree would look like:
blk_var2 -> blk_var3 -> packb -> blk_var1 -> packa -> ker_var2
Specifically, the packb and packa nodes perform their respective packing
operations and then recurse (without any loop) to a subproblem. This means
there are now two kinds of level-3 control tree nodes: partitioning and
non-partitioning. The blocked variants are members of the former, because
they iteratively partition off submatrices and perform suboperations on
those partitions, while the packing variants belong to the latter group.
(This change has the effect of allowing greatly simplified initialization
of the nodes, which previously involved setting many unused node fields to
NULL.)
- Changed the way thrinfo_t tree nodes are arranged to mirror the new
connective structure of control trees. That is, packm nodes are no longer
off-shoot branches of the main algorithmic nodes, but rather connected
"inline".
- Simplified control tree creation functions. Partitioning nodes are created
concisely with just a few fields needing initialization. By contrast, the
packing nodes require additional parameters, which are stored in a
packm-specific struct that is tracked via the optional parameters pointer
within the control tree struct. (This parameter struct must always begin
with a uint64_t that contains the byte size of the struct. This allows
us to use a generic function to recursively copy control trees.) gemm,
herk, and trmm control tree creation continues to be consolidated into
a single function, with the operation family being used to select
among the parameter-agnostic macro-kernel wrappers. A single routine,
bli_cntl_free(), is provided to free control trees recursively, whereby
the chief thread within a groups release the blocks associated with
mem_t entries back to the memory broker from which they were acquired.
- Updated internal back-ends, e.g. bli_gemm_int(), to query and call the
function pointer stored in the current control tree node (rather than
index into a local function pointer array). Before being invoked, these
function pointers are first cast to a gemm_voft (for gemm, herk, or trmm
families) or trsm_voft (for trsm family) type, which is defined in
frame/3/bli_l3_var_oft.h.
- Retired herk and trmm internal back-ends, since all execution now flows
through gemm or trsm blocked variants.
- Merged forwards- and backwards-moving variants by querying the direction
from routines as a function of the variant's matrix operands. gemm and
herk always move forward, while trmm and trsm move in a direction that
is dependent on which operand (a or b) is triangular.
- Added functions bli_thread_get_range_mdim(), bli_thread_get_range_ndim(),
each of which takes additional arguments and hides complexity in managing
the difference between the way ranges are computed for the four families
of operations.
- Simplified level-3 blocked variants according to the above changes, so that
the only steps taken are:
1. Query partitioning direction (forwards or backwards).
2. Prune unreferenced regions, if they exist.
3. Determine the thread partitioning sub-ranges.
<begin loop>
4. Determine the partitioning blocksize (passing in the partitioning
direction)
5. Acquire the curren iteration's partitions for the matrices affected
by the current variants's partitioning dimension (m, k, n).
6. Call the subproblem.
<end loop>
- Instantiate control trees once per thread, per operation invocation.
(This is a change from the previous regime in which control trees were
treated as stateless objects, initialized with the library, and shared
as read-only objects between threads.) This once-per-thread allocation
is done primarily to allow threads to use the control tree as as place
to cache certain data for use in subsequent loop iterations. Presently,
the only application of this caching is a mem_t entry for the packing
blocks checked out from the memory broker (allocator). If a non-NULL
control tree is passed in by the (expert) user, then the tree is copied
by each thread. This is done in bli_l3_thread_decorator(), in
bli_thrcomm_*.c.
- Added a new field to the context, and opid_t which tracks the "family"
of the operation being executed. For example, gemm, hemm, and symm are
all part of the gemm family, while herk, syrk, her2k, and syr2k are
all part of the herk family. Knowing the operation's family is necessary
when conditionally executing the internal (beta) scalar reset on on
C in blocked variant 3, which is needed for gemm and herk families,
but must not be performed for the trmm family (because beta has only
been applied to the current row-panel of C after the first rank-kc
iteration).
- Reexpressed 3m3 induced method blocked variant in frame/3/gemm/ind
to comform with the new control tree design, and renamed the macro-
kernel codes corresponding to 3m2 and 4m1b.
- Renamed bli_mem.c (and its APIs) to bli_memsys.c, and renamed/relocated
bli_mem_macro_defs.h from frame/include to frame/base/bli_mem.h.
- Renamed/relocated bli_auxinfo_macro_defs.h from frame/include to
frame/base/bli_auxinfo.h.
- Fixed a minor bug whereby the storage-to-ukr-preference matching
optimization in the various level-3 front-ends was not being applied
properly when the context indicated that execution would be via an
induced method. (Before, we always checked the native micro-kernel
corresponding to the datatype being executed, whereas now we check
the native micro-kernel corresponding to the datatype's real projection,
since that is the micro-kernel that is actually used by induced methods.
- Added an option to the testsuite to skip the testing of native level-3
complex implementations. Previously, it was always tested, provided that
the c/z datatypes were enabled. However, some configurations use
reference micro-kernels for complex datatypes, and testing these
implementations can slow down the testsuite considerably.
Details:
- These changes constitute the first set of changes in preparation to
revamping the structure and use of control trees in BLIS. Modifications
in this commit don't affect the control tree code yet, but rather lay
the groundwork.
- Defined wrappers for the following functions, where the the wrappers
each take a direction parameter of a new enumerated type (BLIS_BWD or
BLIS_FWD), dir_t, and executes the correct underlying function.
- bli_acquire_mpart_*() and _vpart_*()
- bli_*_determine_kc_[fb]()
- bli_thread_get_range_*() and bli_thread_get_range_weighted_*()
- Consolidated all 'f' (forwards-moving) and 'b' (backwards-moving)
blocked variants for trmm and trsm, and renamed gemm and herk variants
accordingly. The direction is now queried via routines such as
bli_trmm_direct(), which deterines the direction from the implied side
and uplo parameters. For gemm and herk, it is uncondtionally BLIS_FWD.
- Defined wrappers to parameter-specific macrokernels for herk, trmm, and
trsm, e.g. bli_trmm_xx_ker_var2(), that execute the correct underlying
macrokernel based on the implied parameters. The same logic used to
choose the dir_t in _direct() functions is used here.
- Simplified the function pointer arrays in _int() functions given the
consolidation and dir_t querying mentioned above.
- Function signature (whitespace) reformatting for various functions.
- Removed old code in various 'old' directories.
Details:
- Added 'f' to some block variant files/functions to be consistent with
other file/functions' naming convention. Here, the f indicates
partitioning in the "forward" direction.
Details:
- Added infrastructure to support a new scalar representation, whereby
every object contains an internal scalar that defaults to 1.0. This
facilitates passing scalars around without having to house them in
separate objects. These "attached" scalars are stored in the internal
atom_t field of the obj_t struct, and are always stored to be the same
datatype as the object to which they are attached. Level-3 variants no
longer take scalar arguments, however, level-3 internal back-ends stll
do; this is so that the calling function can perform subproblems such
as C := C - alpha * A * B on-the-fly without needing to change either
of the scalars attached to A or B.
- Removed scalar argument from packm_int().
- Observe and apply attached scalars in scalm_int(), and removed scalar
from interface of scalm_unb_var1().
- Renamed the following functions (and corresponding invocations):
bli_obj_init_scalar_copy_of()
-> bli_obj_scalar_init_detached_copy_of()
bli_obj_init_scalar() -> bli_obj_scalar_init_detached()
bli_obj_create_scalar_with_attached_buffer()
-> bli_obj_create_1x1_with_attached_buffer()
bli_obj_scalar_equals() -> bli_obj_equals()
- Defined new functions:
bli_obj_scalar_detach()
bli_obj_scalar_attach()
bli_obj_scalar_apply_scalar()
bli_obj_scalar_reset()
bli_obj_scalar_has_nonzero_imag()
bli_obj_scalar_equals()
- Placed all bli_obj_scalar_* functions in a new file, bli_obj_scalar.c.
- Renamed the following macros:
bli_obj_scalar_buffer() -> bli_obj_buffer_for_1x1()
bli_obj_is_scalar() -> bli_obj_is_1x1()
- Defined new macros to set and copy internal scalars between objects:
bli_obj_set_internal_scalar()
bli_obj_copy_internal_scalar()
- In level-3 internal back-ends, added conditional blocks where alpha and
beta are checked for non-unit-ness. Those values for alpha and beta are
applied to the scalars attached to aliases of A/B/C, as appropriate,
before being passed into the variant specified by the control tree.
- In level-3 blocked variants, pass BLIS_ONE into subproblems instead of
alpha and/or beta.
- In level-3 macro-kernels, changed how scalars are obtained. Now, scalars
attached to A and B are multiplied together to obtain alpha, while beta
is obtained directly from C.
- In level-3 front-ends, removed old function calls meant to provide
future support for mixed domain/precision. These can be added back later
once that functionality is given proper treatment. Also, removed the
creating of copy-casts of alpha and beta since typecasting of scalars
is now implicitly handled in the internal back-ends when alpha and
beta are applied to the attached scalars.
Details:
- Changed all filename and function prefixes from 'bl2' to 'bli'.
- Changed the "blis2.h" header filename to "blis.h" and changed all
corresponding #include statements accordingly.
- Fixed incorrect association for Fran in CREDITS file.
