Details:
- Parallelism within the IC loop (3rd loop around the microkernel) is
now supported within the trsm operation. This is done via a new branch
on each of the control and thread trees, which guide execution of a
new trsm-only subproblem from within bli_trsm_blk_var1(). This trsm
subproblem corresponds to the macrokernel computation on only the
block of A that contains the diagonal (labeled as A11 in algorithms
with FLAME-like partitioning), and the corresponding row panel of C.
During the trsm subproblem, all threads within the JC communicator
participate and parallelize along the JR loop, including any
parallelism that was specified for the IC loop. (IR loop parallelism
is not supported for trsm due to inter-iteration dependencies.) After
this trsm subproblem is complete, a barrier synchronizes all
participating threads and then they proceed to apply the prescribed
BLIS_IC_NT (or equivalent) ways of parallelism (and any BLIS_JR_NT
parallelism specified within) to the remaining gemm subproblem (the
rank-k update that is performed using the newly updated row-panel of
B). Thus, trsm now supports JC, IC, and JR loop parallelism.
- Modified bli_trsm_l_cntl_create() to create the new "prenode" branch
of the trsm_l cntl_t tree. The trsm_r tree was left unchanged, for
now, since it is not currently used. (All trsm problems are cast in
terms of left-side trsm.)
- Updated bli_cntl_free_w_thrinfo() to be able to free the newly shaped
trsm cntl_t trees. Fixed a potentially latent bug whereby a cntl_t
subnode is only recursed upon if there existed a corresponding
thrinfo_t node, which may not always exist (for problems too small
to employ full parallelization due to the minimum granularity imposed
by micropanels).
- Updated other functions in frame/base/bli_cntl.c, such as
bli_cntl_copy() and bli_cntl_mark_family(), to recurse on sub-prenodes
if they exist.
- Updated bli_thrinfo_free() to recurse into sub-nodes and prenodes
when they exist, and added support for growing a prenode branch to
bli_thrinfo_grow() via a corresponding set of help functions named
with the _prenode() suffix.
- Added a bszid_t field thrinfo_t nodes. This field comes in handy when
debugging the allocation/release of thrinfo_t nodes, as it helps trace
the "identity" of each nodes as it is created/destroyed.
- Renamed
bli_l3_thrinfo_print_paths() -> bli_l3_thrinfo_print_gemm_paths()
and created a separate bli_l3_thrinfo_print_trsm_paths() function to
print out the newly reconfigured thrinfo_t trees for the trsm
operation.
- Trival changes to bli_gemm_blk_var?.c and bli_trsm_blk_var?.c
regarding variable declarations.
- Removed subpart_t enum values BLIS_SUBPART1T, BLIS_SUBPART1B,
BLIS_SUBPART1L, BLIS_SUBPART1R. Then added support for two new labels
(semantically speaking): BLIS_SUBPART1A and BLIS_SUBPART1B, which
represent the subpartition ahead of and behind, respectively,
BLIS_SUBPART1. Updated check functions in bli_check.c accordingly.
- Shuffled layering/APIs for bli_acquire_mpart_[mn]dim() and
bli_acquire_mpart_t2b/b2t(), _l2r/r2l().
- Deprecated old functions in frame/3/bli_l3_thrinfo.c.
Details:
- Implemented a sophisticated data structure and set of APIs that track
the small blocks of memory (around 80-100 bytes each) used when
creating nodes for control and thread trees (cntl_t and thrinfo_t) as
well as thread communicators (thrcomm_t). The purpose of the small
block allocator, or sba, is to allow the library to transition into a
runtime state in which it does not perform any calls to malloc() or
free() during normal execution of level-3 operations, regardless of
the threading environment (potentially multiple application threads
as well as multiple BLIS threads). The functionality relies on a new
data structure, apool_t, which is (roughly speaking) a pool of
arrays, where each array element is a pool of small blocks. The outer
pool, which is protected by a mutex, provides separate arrays for each
application thread while the arrays each handle multiple BLIS threads
for any given application thread. The design minimizes the potential
for lock contention, as only concurrent application threads would
need to fight for the apool_t lock, and only if they happen to begin
their level-3 operations at precisely the same time. Thanks to Kiran
Varaganti and AMD for requesting this feature.
- Added a configure option to disable the sba pools, which are enabled
by default; renamed the --[dis|en]able-packbuf-pools option to
--[dis|en]able-pba-pools; and rewrote the --help text associated with
this new option and consolidated it with the --help text for the
option associated with the sba (--[dis|en]able-sba-pools).
- Moved the membrk field from the cntx_t to the rntm_t. We now pass in
a rntm_t* to the bli_membrk_acquire() and _release() APIs, just as we
do for bli_sba_acquire() and _release().
- Replaced all calls to bli_malloc_intl() and bli_free_intl() that are
used for small blocks with calls to bli_sba_acquire(), which takes a
rntm (in addition to the bytes requested), and bli_sba_release().
These latter two functions reduce to the former two when the sba pools
are disabled at configure-time.
- Added rntm_t* arguments to various cntl_t and thrinfo_t functions, as
required by the new usage of bli_sba_acquire() and _release().
- Moved the freeing of "old" blocks (those allocated prior to a change
in the block_size) from bli_membrk_acquire_m() to the implementation
of the pool_t checkout function.
- Miscellaneous improvements to the pool_t API.
- Added a block_size field to the pblk_t.
- Harmonized the way that the trsm_ukr testsuite module performs packing
relative to that of gemmtrsm_ukr, in part to avoid the need to create
a packm control tree node, which now requires a rntm_t that has been
initialized with an sba and membrk.
- Re-enable explicit call bli_finalize() in testsuite so that users who
run the testsuite with memory tracing enabled can check for memory
leaks.
- Manually imported the compact/minor changes from 61441b24 that cause
the rntm to be copied locally when it is passed in via one of the
expert APIs.
- Reordered parameters to various bli_thrcomm_*() functions so that the
thrcomm_t* to the comm being modified is last, not first.
- Added more descriptive tracing for allocating/freeing small blocks and
formalized via a new configure option: --[dis|en]able-mem-tracing.
- Moved some unused scalm code and headers into frame/1m/other.
- Whitespace changes to bli_pthread.c.
- Regenerated build/libblis-symbols.def.
Details:
- Removed explicit reference to The University of Texas at Austin in the
third clause of the license comment blocks of all relevant files and
replaced it with a more all-encompassing "copyright holder(s)".
- Removed duplicate words ("derived") from a few kernels' license
comment blocks.
- Homogenized license comment block in kernels/zen/3/bli_gemm_small.c
with format of all other comment blocks.
Details:
- Removed four trailing spaces after "BLIS" that occurs in most files'
commented-out license headers.
- Added UT copyright lines to some files. (These files previously had
only AMD copyright lines but were contributed to by both UT and AMD.)
- In some files' copyright lines, expanded 'The University of Texas' to
'The University of Texas at Austin'.
- Fixed various typos/misspellings in some license headers.
Details:
- Defined a new operation in frame/base/bli_proj.c, bli_projm(), which
behaves like bli_copym(), except that operands a and b are allowed to
contain data of differing domains (e.g. a is real while b is complex,
or vice versa). The file is named bli_proj.c, rather than bli_projm.c,
with the intention that a 'v' vector version of the function may be
added to the same file (at some point in the future).
- Added supporting bli_check_*() functions in bli_check.c to confirm
consistent precisions between to datatypes/objects, as well as the
appropriate error message in bli_error.c and a new error code in
bli_type_defs.h.
- Wrote a bli_projm_check() function to go along with bli_projm().
- Defined static function bli_obj_real_part() in bli_obj_macro_defs.h,
which will initialize an obj_t alias to the real part of the source
object.
- Fixed a bug in the static function bli_dt_proj_to_complex(), found
in bli_param_macro_defs.h. Thankfully, there were no calls to the
function to produce buggy behavior.
Details:
- Converted most C preprocessor macros in bli_param_macro_defs.h and
bli_obj_macro_defs.h to static functions.
- Reshuffled some functions/macros to bli_misc_macro_defs.h and also
between bli_param_macro_defs.h and bli_obj_macro_defs.h.
- Changed obj_t-initializing macros in bli_type_defs.h to static
functions.
- Removed some old references to BLIS_TWO and BLIS_MINUS_TWO from
bli_constants.h.
- Whitespace changes in select files (four spaces to single tab).
Details:
- Added a new configure option, --[en|dis]able-packbuf-pools, which will
enable or disable the use of internal memory pools for managing buffers
used for packing. When disabled, the function specified by the cpp
macro BLIS_MALLOC_POOL is called whenever a packing buffer is needed
(and BLIS_FREE_POOL is called when the buffer is ready to be released,
usually at the end of a loop). When enabled, which was the status quo
prior to this commit, a memory pool data structure is created and
managed to provide threads with packing buffers. The memory pool
minimizes calls to bli_malloc_pool() (i.e., the wrapper that calls
BLIS_MALLOC_POOL), but does so through a somewhat more complex
mechanism that may incur additional overhead in some (but not all)
situations. The new option defaults to --enable-packbuf-pools.
- Removed the reinitialization of the memory pools from the level-3
front-ends and replaced it with automatic reinitialization within the
pool API's implementation. This required an extra argument to
bli_pool_checkout_block() in the form of a requested size, but hides
the complexity entirely from BLIS. And since bli_pool_checkout_block()
is only ever called within a critical section, this change fixes a
potential race condition in which threads using contexts with different
cache blocksizes--most likely a heterogeneous environment--can check
out pool blocks that are too small for the submatrices it wishes to
pack. Thanks to Nisanth Padinharepatt for reporting this potential
issue.
- Removed several functions in light of the relocation of pool reinit,
including bli_membrk_reinit_pools(), bli_memsys_reinit(),
bli_pool_reinit_if(), and bli_check_requested_block_size_for_pool().
- Updated the testsuite to print whether the memory pools are enabled or
disabled.
Details:
- Fixed implicit typecasting of conj_t to trans_t in bli_[un]packm_cxk.c.
- Properly typecast integer arguments to match format specifier in various
calls to printf() in bli_l3_thrinfo.c, bli_cntx.c, bli_pool.c, and
bli_util_oapi.c.
- Fixed "unsigned less-than-comparison with zero" checks in bli_check.c,
bli_cntx.h.
- Fixed mis-typed enums in bli_cntx.c (e.g., l1mkr_t that should have been
l1fkr_t or l1vkr_t).
- Fixed instances of opid_t value BLIS_GEMM that should have been l3ukr_t
value BLIS_GEMM_UKR in bli_cntx_ref.c.
- NOTE: These issues were identified via compiler warnings when building
BLIS with clang on a rather old installation of OS X:
$ clang --version
Apple LLVM version 5.0 (clang-500.2.79) (based on LLVM 3.3svn)
Target: x86_64-apple-darwin15.2.0
Thread model: posix
Details:
- Reworked the build system around a configuration registry file, named
config_registry', that identifies valid configuration targets, their
constituent sub-configurations, and the kernel sets that are needed by
those sub-configurations. The build system now facilitates the building
of a single library that can contains kernels and cache/register
blocksizes for multiple configurations (microarchitectures). Reference
kernels are also built on a per-configuration basis.
- Updated the Makefile to use new variables set by configure via the
config.mk.in template, such as CONFIG_LIST, KERNEL_LIST, and KCONFIG_MAP,
in determining which sub-configurations (CONFIG_LIST) and kernel sets
(KERNEL_LIST) are included in the library, and which make_defs.mk files'
CFLAGS (KCONFIG_MAP) are used when compiling kernels.
- Reorganized 'kernels' directory into a "flat" structure. Renamed kernel
functions into a standard format that includes the kernel set name
(e.g. 'haswell'). Created a "bli_kernels_<kernelset>.h" file in each
kernels sub-directory. These files exist to provide prototypes for the
kernels present in those directories.
- Reorganized reference kernels into a top-level 'ref_kernels' directory.
This directory includes a new source file, bli_cntx_ref.c (compiled on
a per-configuration basis), that defines the code needed to initialize
a reference context and a context for induced methods for the
microarchitecture in question.
- Rewrote make_defs.mk files in each configuration so that the compiler
variables (e.g. CFLAGS) are "stored" (renamed) on a per-configuration
basis.
- Modified bli_config.h.in template so that bli_config.h is generated with
#defines for the config (family) name, the sub-configurations that are
associated with the family, and the kernel sets needed by those
sub-configurations.
- Deprecated all kernel-related information in bli_kernel.h and transferred
what remains to new header files named "bli_arch_<configname>.h", which
are conditionally #included from a new header bli_arch.h. These files
are still needed to set library-wide parameters such as custom
malloc()/free() functions or SIMD alignment values.
- Added bli_cntx_init_<configname>.c files to each configuration directory.
The files contain a function, named the same as the file, that initializes
a "native" context for a particular configuration (microarchitecture). The
idea is that optimized kernels, if available, will be initialized into
these contexts. Other fields will retain pointers to reference functions,
which will be compiled on a per-configuration basis. These bli_cntx_init_*()
functions will be called during the initialization of the global kernel
structure. They are thought of as initializing for "native" execution, but
they also form the basis for contexts that use induced methods. These
functions are prototyped, along with their _ref() and _ind() brethren, by
prototype-generating macros in bli_arch.h.
- Added a new typedef enum in bli_type_defs.h to define an arch_t, which
identifies the various sub-configurations.
- Redesigned the global kernel structure (gks) around a 2D array of cntx_t
structures (pointers to cntx_t, actually). The first dimension is indexed
over arch_t and the inner dimension is the ind_t (induced method) for
each microarchitecture. When a microarchitecture (configuration) is
"registered" at init-time, the inner array for that configuration in the
2D array is initialized (and allocated, if it hasn't been already). The
cntx_t slot for BLIS_NAT is initialized immediately and those for other
induced method types are initialized and cached on-demand, as needed. At
cntx_t registration, we also store function pointers to cntx_init functions
that will initialize (a) "reference" contexts and (b) contexts for use with
induced methods. We don't cache the full contexts for reference contexts
since they are rarely needed. The functions that initialize these two kinds
of contexts are generated automatically for each targeted sub-configuration
from cpp-templatized code at compile-time. Induced method contexts that
need "stage" adjustments can still obtain them via functions in
bli_cntx_ind_stage.c.
- Added new functions and functionality to bli_cntx.c, such as for setting
the level-1f, level-1v, and packm kernels, and for converting a native
context into one for executing an induced method.
- Moved the checking of register/cache blocksize consistency from being cpp
macros in bli_kernel_macro_defs.h to being runtime checks defined in
bli_check.c and called from bli_gks_register_cntx() at the time that the
global kernel structure's internal context is initialized for a given
microarchitecture/configuration.
- Deprecated all of the old per-operation bli_*_cntx.c files and removed
the previous operation-level cntx_t_init()/_finalize() invocations.
Instead, we now query the gks for a suitable context, usually via
bli_gks_query_cntx().
- Deprecated support for the 3m2 and 3m3 induced methods. (They required
hackery that I was no longer willing to support.)
- Consolidated the 1e and 1r packm kernels for any given register blocksize
into a single kernel that will branch on the schema and support packing
to both formats.
- Added the cntx_t* argument to all packm kernel signatures.
- Deprecated the local function pointer array in all bli_packm_cxk*.c files
and instead obtain the packm kernel from the cntx_t.
- Added bli_calloc_intl(), which serves as the calloc-equivalent to to
bli_malloc_intl(). Useful when we wish to allocate and initialize to
zero/NULL.
- Converted existing cpp macro functions defined in bli_blksz.h, bli_func.h,
bli_cntx.h into static functions.
Details:
- Replaced all instances of bli_malloc() and bli_free() with one of:
- bli_malloc_pool()/bli_free_pool()
- bli_malloc_user()/bli_free_user()
- bli_malloc_intl()/bli_free_intl()
each of which can be configured to call malloc()/free() substitutes,
so long as the substitute functions have the same function type
signatures as malloc() and free() defined by C's stdlib.h. The _pool()
function is called when allocating blocks for the memory pools (used
for packing buffers, primarily), the _user() function is called when
obj_t's are created (via bli_obj_create() and friends), and the _intl()
function is called for internal use by BLIS, such as when creating
control tree nodes or temporary buffers for manipulating internal data
structures. Substitutes for any of the three types of bli_malloc() may
be specified by #defining the following pairs of cpp macros in
bli_kernel.h:
- BLIS_MALLOC_POOL/BLIS_FREE_POOL
- BLIS_MALLOC_USER/BLIS_FREE_USER
- BLIS_MALLOC_INTL/BLIS_FREE_INTL
to be the name of the substitute functions. (Obviously, the object
code that contains these functions must be provided at link-time.)
These macros default to malloc() and free(). Subsitute functions are
also automatically prototyped by BLIS (in bli_malloc_prototypes.h).
- Removed definitions for bli_malloc() and bli_free().
- Note that bli_malloc_pool() and bli_malloc_user() are now defined in
terms of a new function, bli_malloc_align(), which aligns memory to an
arbitrary (power of two) alignment boundary, but does so manually,
whereas before alignment was performed behind the scenes by
posix_memalign(). Currently, bli_malloc_intl() is defined in terms
of bli_malloc_noalign(), which serves as a simple wrapper to the
designated function that is passed in (e.g. BLIS_MALLOC_INTL).
Similarly, there are bli_free_align() and bli_free_noalign(), which
are used in concert with their bli_malloc_*() counterparts.
Details:
- Retrofitted a new data structure, known as a context, into virtually
all internal APIs for computational operations in BLIS. The structure
is now present within the type-aware APIs, as well as many supporting
utility functions that require information stored in the context. User-
level object APIs were unaffected and continue to be "context-free,"
however, these APIs were duplicated/mirrored so that "context-aware"
APIs now also exist, differentiated with an "_ex" suffix (for "expert").
These new context-aware object APIs (along with the lower-level, type-
aware, BLAS-like APIs) contain the the address of a context as a last
parameter, after all other operands. Contexts, or specifically, cntx_t
object pointers, are passed all the way down the function stack into
the kernels and allow the code at any level to query information about
the runtime, such as kernel addresses and blocksizes, in a thread-
friendly manner--that is, one that allows thread-safety, even if the
original source of the information stored in the context changes at
run-time; see next bullet for more on this "original source" of info).
(Special thanks go to Lee Killough for suggesting the use of this kind
of data structure in discussions that transpired during the early
planning stages of BLIS, and also for suggesting such a perfectly
appropriate name.)
- Added a new API, in frame/base/bli_gks.c, to define a "global kernel
structure" (gks). This data structure and API will allow the caller to
initialize a context with the kernel addresses, blocksizes, and other
information associated with the currently active kernel configuration.
The currently active kernel configuration within the gks cannot be
changed (for now), and is initialized with the traditional cpp macros
that define kernel function names, blocksizes, and the like. However,
in the future, the gks API will be expanded to allow runtime management
of kernels and runtime parameters. The most obvious application of this
new infrastructure is the runtime detection of hardware (and the
implied selection of appropriate kernels). With contexts in place,
kernels may even be "hot swapped" at runtime within the gks. Once
execution enters a level-3 _front() function, the memory allocator will
be reinitialized on-the-fly, if necessary, to accommodate the new
kernels' blocksizes. If another application thread is executing with
another (previously loaded) kernel, it will finish in a deterministic
fashion because its kernel information was loaded into its context
before computation began, and also because the blocks it checked out
from the internal memory pools will be unaffected by the newer threads'
reinitialization of the allocator.
- Reorganized and streamlined the 'ind' directory, which contains much of
the code enabling use of induced methods for complex domain matrix
multiplication; deprecated bli_bsv_query.c and bli_ukr_query.c, as
those APIs' functionality is now mostly subsumed within the global
kernel structure.
- Updated bli_pool.c to define a new function, bli_pool_reinit_if(),
that will reinitialize a memory pool if the necessary pool block size
has increased.
- Updated bli_mem.c to use bli_pool_reinit_if() instead of
bli_pool_reinit() in the definition of bli_mem_pool_init(), and placed
usage of contexts where appropriate to communicate cache and register
blocksizes to bli_mem_compute_pool_block_sizes().
- Simplified control trees now that much of the information resides in
the context and/or the global kernel structure:
- Removed blocksize object pointers (blksz_t*) fields from all control
tree node definitions and replaced them with blocksize id (bszid_t)
values instead, which may be passed into a context query routine in
order to extract the corresponding blocksize from the given context.
- Removed micro-kernel function pointers (func_t*) fields from all
control tree node definitions. Now, any code that needs these function
pointers can query them from the local context, as identified by a
level-3 micro-kernel id (l3ukr_t), level-1f kernel id, (l1fkr_t), or
level-1v kernel id (l1vkr_t).
- Removed blksz_t object creation and initialization, as well as kernel
function object creation and initialization, from all operation-
specific control tree initialization files (bli_*_cntl.c), since this
information will now live in the gks and, secondarily, in the context.
- Removed blocksize multiples from blksz_t objects. Now, we track
blocksize multiples for each blocksize id (bszid_t) in the context
object.
- Removed the bool_t's that were required when a func_t was initialized.
These bools are meant to allow one to track the micro-kernel's storage
preferences (by rows or columns). This preference is now tracked
separately within the gks and contexts.
- Merged and reorganized many separate-but-related functions into single
files. This reorganization affects frame/0, 1, 1d, 1m, 1f, 2, 3, and
util directories, but has the most obvious effect of allowing BLIS
to compile noticeably faster.
- Reorganized execution paths for level-1v, -1d, -1m, and -2 operations
in an attempt to reduce overhead for memory-bound operations. This
includes removal of default use of object-based variants for level-2
operations. Now, by default, level-2 operations will directly call a
low-level (non-object based) loop over a level-1v or -1f kernel.
- Converted many common query functions in blk_blksz.c (renamed from
bli_blocksize.c) and bli_func.c into cpp macros, now defined in their
respective header files.
- Defined bli_mbool.c API to create and query "multi-bools", or
heterogeneous bool_t's (one for each floating-point datatype), in the
same spirit as blksz_t and func_t.
- Introduced two key parameters of the hardware: BLIS_SIMD_NUM_REGISTERS
and BLIS_SIMD_SIZE. These values are needed in order to compute a third
new parameter, which may be set indirectly via the aforementioned
macros or directly: BLIS_STACK_BUF_MAX_SIZE. This value is used to
statically allocate memory in macro-kernels and the induced methods'
virtual kernels to be used as temporary space to hold a single
micro-tile. These values are now output by the testsuite. The default
value of BLIS_STACK_BUF_MAX_SIZE is computed as
"2 * BLIS_SIMD_NUM_REGISTERS * BLIS_SIMD_SIZE".
- Cleaned up top-level 'kernels' directory (for example, renaming the
embarrassingly misleading "avx" and "avx2" directories to "sandybridge"
and "haswell," respectively, and gave more consistent and meaningful
names to many kernel files (as well as updating their interfaces to
conform to the new context-aware kernel APIs).
- Updated the testsuite to query blocksizes from a locally-initialized
context for test modules that need those values: axpyf, dotxf,
dotxaxpyf, gemm_ukr, gemmtrsm_ukr, and trsm_ukr.
- Reformatted many function signatures into a standard format that will
more easily facilitate future API-wide changes.
- Updated many "mxn" level-0 macros (ie: those used to inline double loops
for level-1m-like operations on small matrices) in frame/include/level0
to use more obscure local variable names in an effort to avoid variable
shaddowing. (Thanks to Devin Matthews for pointing these gcc warnings,
which are only output using -Wshadow.)
- Added a conj argument to setm, so that its interface now mirrors that
of scalm. The semantic meaning of the conj argument is to optionally
allow implicit conjugation of the scalar prior to being populated into
the object.
- Deprecated all type-aware mixed domain and mixed precision APIs. Note
that this does not preclude supporting mixed types via the object APIs,
where it produces absolutely zero API code bloat.
Details:
- Applied a patch submitted by Devin Matthews that:
- implements subtle changes to handling of somewhat unusual cases of
row and column strides to accommodate certail tensor cases, which
includes adding dimension parameters to _is_col_tilted() and
_is_row_tilted() macros,
- simplifies how buffers are sized when requested BLIS-allocated
objects,
- re-consolidates bli_adjust_strides_*() into one function, and
- defines 'restrict' keyword as a "nothing" macro for C++ and pre-C99
environments.
Details:
- Added an imaginary stride field ("is") to obj_t.
- Renamed bli_obj_set_incs() macro to bli_obj_set_strides().
- Defined bli_obj_imag_stride() and bli_obj_set_imag_stride() and
added invocations in key locations.
- Added some basic error-checking related to imaginary stride.
- For now, imaginary stride will not be exposed into the most-used
BLIS APIs such as bli_obj_create(), and certainly not the
computational APIs such as bli_dgemm().
Details:
- Updated copyright headers to include "at Austin" in the name of the
University of Texas.
- Updated the copyright years of a few headers to 2014 (from 2011 and
2012).
Details:
- Updated level-2 and level-3 internal back-ends so that the operation's
_check() function is called BEFORE any attempt to return early due to
the presence of zero dimensions. This ordering makes more sense because
(for example) object dimensions should match even if one of them is
zero. Previously, a dimension mismatch could result in an early return
with no error message.
- Updated bli_check_object_buffer() so that NULL buffers result in an
error only if the object is dimensionally non-empty (i.e., only if both
of the object's dimensions are non-zero). This allows BLIS operations
to be performed on dimensionally empty objects (i.e., where at least one
dimension is zero).
- Updated the error message associated with bli_check_object_buffer()
to mention the newly relaxed constraint mentioned above, vis-a-vis
non-zero dimensions.
Details:
- Relaxed the constraint in bli_obj_attach_buffer_check(), which required
the buffer address being attached to be non-NULL. This is acceptable
because the user was already able to create and use objects with NULL
buffers (via bli_obj_create_without_buffer(), which initializes the
buffer to NULL).
- Inserted calls to newly defined function, bli_check_object_buffer(),
into nearly all operations' _check() or _int_check() functions. This
allows BLIS to abort peacefully if a computational routine is called
with an object containing a NULL buffer. By contrast, under such
conditions, BLAS would typically fail with a segmentation fault.
- Within operation front-ends, moved the calls to _check()/_int_check()
so that zero dimensions are checked first (and if found, execution
returns with trivial or no computation). This resolves issue #7. Thanks
to Jack Poulson for reporting this bug.
Details:
- Redefined dim_t and inc_t in terms of gint_t (instead of guint_t).
This will facilitate interoperability with Fortran in the future.
(Fortran does not support unsigned integers.)
- Redefined many instances of stride-related macros so that they return
or use the absolute value of the strides, rather than the raw strides
which may now be signed. Added new macros bli_is_row_stored_f() and
bli_is_col_stored_f(), which assume positive (forward-oriented) strides,
and changed the packm_blk_var[23] variants to use these macros instead
of the existing bli_is_row_stored(), bli_is_col_stored().
- Added/adjusted typecasting to to various functions/macros, including
bli_obj_alloc_buffer(), bli_obj_buffer_at_off(), and various pointer-
related macros in bli_param_macro_defs.h.
- Redefined bli_convert_blas_incv() macro so that the BLAS compatibility
layer properly handles situations where vector increments are negative.
Thanks to Vladimir Sukharev for pointing out this issue.
- Changed type of increment parameters in bli_adjust_strides() from dim_t
to inc_t. Likewise in bli_check_matrix_strides().
- Defined bli_check_matrix_object(), which checks for negative strides.
- Redefined bli_check_scalar_object() and bli_check_vector_object() so
that they also check for negative stride.
- Added instances of bli_check_matrix_object() to various operations'
_check routines.
Details:
- Added test modules in test suite for level-1f kernels and level-3
micro-kernels. (Duplication in the micro-kernels, for now, is NOT
supported by these test modules.)
- Added section override switches to test suite's input.operations file.
- Added obj_t APIs for level-1f front-ends and their unblocked variants to
facilitate the level-1f test modules. Also added front-end for dupl
operation.
- Added obj_t-based check routines for level-1f operations, which are
called from the new front-ends mentioned above.
- Added query routines for axpyf, dotxf, and dotxaxpyf that return fusing
factors as a function of datatype, which is needed by their respective
test modules.
- Whitespace changes to bli_kernel.h of all existing configurations.
Details:
- Changed the way bli_type_defs.h defines integer types so that dim_t,
inc_t, doff_t, etc. are all defined in terms of gint_t (general signed
integer) or guint_t (general unsigned integer).
- Renamed Fortran types fchar and fint to f77_char and f77_int.
- Define f77_int as int64_t if a new configuration variable,
BLIS_ENABLE_BLIS2BLAS_INT64, is defined, and int32_t otherwise.
These types are defined in stdint.h, which is now included in blis.h.
- Renamed "complex" type in f2c files to "singlecomplex" and typedef'ed
in terms of scomplex.
- Renamed "char" type in f2c files to "character" and typedef'ed in terms
of char.
- Updated bla_amax() wrappers so that the return type is defined directly
as f77_int, rather than letting the prototype-generating macro decide
the type. This was the only use of GENTFUNC2I/GENTPROT2I-related macros,
so I removed them. Also, changed the body of the wrapper so that a
gint_t is passed into abmaxv, which is THEN typecast to an f77_int
before returning the value.
- Updated f2c code that accessed .r and .i fields of complex and
doublecomplex types so that they use .real and .imag instead (now that
we are using scomplex and dcomplex).
Details:
- Consolidated lower and upper blocked variants for herk and her2k, and
renamed the resulting variants, according to the same changes recently
made to trmm and trsm.
- Implemented support for four new subpartitions types:
BLIS_SUBPART1T
BLIS_SUBPART1B
BLIS_SUBPART1L
BLIS_SUBPART1R
which correspond to "merged" partitions that include the middle "1"
partition as well as either the neighboring "0" or "2" partition. This is
used to clean up code in herk/her2k var2 that attempts to partition away
the strictly zero region above or below the diagonal of a matrix operand
that is being marched through diagonally.
- Added safeguards to herk macro-kernels that skip any leading or trailing
zero region in the panel of C that is passed in. This is now needed given
that herk/her2k var1 no longer partitions off this zero region before
calling the macro-kernel (via bli_her[2]k_int()).
- Updated comments and other whitespace changes to trmm/trsm macro-kernels.
Details:
- Modified bli_obj_alloc_buffer() to allow allocating an empty buffer, and
modified bli_adjust_strides() to explicitly handle m = n = 0.
- Updated bli_check_matrix_strides() to allow cases where m = n = 0.
Details:
- Implemented amax operation in BLIS.
- Activated BLAS2BLIS routine mapping for new amax BLIS implementation.
- Added integer support to [f]printv, [f]printm.
- Added integer support to level-0 copys macros.
- Updated printing of configuration information in test suite driver.
- Comment changes to _config.h files.
- Added comments to bla_dot.c to reminder reader what sdsdot()/dsdot() are
used for.
Details:
- Changed all filename and function prefixes from 'bl2' to 'bli'.
- Changed the "blis2.h" header filename to "blis.h" and changed all
corresponding #include statements accordingly.
- Fixed incorrect association for Fran in CREDITS file.
