Details:
- Added support for being able to duplicate (broadcast) elements in
memory when packing matrix B (ie: the left-hand operand) in level-3
operations. This turns out advantageous for some architectures that
can afford the cost of the extra bandwidth and somehow benefit from
the pre-broadcast elements (and thus being able to avoid using
broadcast-style load instructions on micro-rows of B in the gemm
microkernel).
- Support optionally disabling right-side hemm and symm. If this occurs,
hemm_r is implemented in terms of hemm_l (and symm_r in terms of
symm_l). This is needed when broadcasting during packing because the
alternative--supporting the broadcast of B while also allowing matrix
B to be Hermitian/symmetric--would be an absolute mess.
- Support alignment factors for packed blocks of A, B, and C separately
(as well as for general-purpose buffers). In addition, we support
byte offsets from those alignment values (which is different from
aligning by align+offset bytes to begin with). The default alignment
values are BLIS_PAGE_SIZE in all four cases, with the offset values
defaulting to zero.
- Pass pack_t schema into bli_?packm_cxk() so that it can be then passed
into the packm kernel, where it will be needed by packm kernels that
perform broadcasts of B, since the idea is that we *only* want to
broadcast when packing micropanels of B and not A.
- Added definition for variadic bli_cntx_set_l3_vir_ukrs(), which can be
used to set custom virtual level-3 microkernels in the cntx_t, which
would typically be done in the bli_cntx_init_*() function defined in
the subconfiguration of interest.
- Added a "broadcast B" kernel function for use with NP/NR = 12/6,
defined in in ref_kernels/1m/bli_packm_cxk_bb_ref.c.
- Added a gemm, gemmtrsm, and trsm "broadcast B" reference kernels
defined in ref_kernels/3/bb. (These kernels have been tested with
double real with NP/NR = 12/6.)
- Added #ifndef ... #endif guards around several macro constants defined
in frame/include/bli_kernel_macro_defs.h.
- Defined a few "broadcast B" static functions in
frame/include/level0/bb for use by "broadcast B"-style packm reference
kernels. For now, only the real domain kernels are tested and fully
defined.
- Output the alignment and offset values for packed blocks of A and B
in the testsuite's "BLIS configuration info" section.
- Comment updates to various files.
- Bumped so_version to 3.0.0.
Details:
- Removed malloc_ft and free_ft function pointer arguments from the
interface to bli_apool_init() after deciding that there is no need to
specify the malloc()/free() for blocks within the apool. (The apool
blocks are actually just array_t structs.) Instead, we simply call
bli_malloc_intl()/_free_intl() directly. This has the added benefit
of allowing additional output when memory tracing is enabled via
--enable-mem-tracing. Also made corresponding changes elsewhere in
the apool API.
- Changed the inner pools (elements of the array_t within the apool_t)
to use BLIS_MALLOC_POOL and BLIS_FREE_POOL instead of BLIS_MALLOC_INTL
and BLIS_FREE_INTL.
- Disabled definitions of bli_malloc_pool() and bli_free_pool() since
there are no longer any consumers of these functions.
- Very minor comment / printf() updates.
Details:
- Implemented a sophisticated data structure and set of APIs that track
the small blocks of memory (around 80-100 bytes each) used when
creating nodes for control and thread trees (cntl_t and thrinfo_t) as
well as thread communicators (thrcomm_t). The purpose of the small
block allocator, or sba, is to allow the library to transition into a
runtime state in which it does not perform any calls to malloc() or
free() during normal execution of level-3 operations, regardless of
the threading environment (potentially multiple application threads
as well as multiple BLIS threads). The functionality relies on a new
data structure, apool_t, which is (roughly speaking) a pool of
arrays, where each array element is a pool of small blocks. The outer
pool, which is protected by a mutex, provides separate arrays for each
application thread while the arrays each handle multiple BLIS threads
for any given application thread. The design minimizes the potential
for lock contention, as only concurrent application threads would
need to fight for the apool_t lock, and only if they happen to begin
their level-3 operations at precisely the same time. Thanks to Kiran
Varaganti and AMD for requesting this feature.
- Added a configure option to disable the sba pools, which are enabled
by default; renamed the --[dis|en]able-packbuf-pools option to
--[dis|en]able-pba-pools; and rewrote the --help text associated with
this new option and consolidated it with the --help text for the
option associated with the sba (--[dis|en]able-sba-pools).
- Moved the membrk field from the cntx_t to the rntm_t. We now pass in
a rntm_t* to the bli_membrk_acquire() and _release() APIs, just as we
do for bli_sba_acquire() and _release().
- Replaced all calls to bli_malloc_intl() and bli_free_intl() that are
used for small blocks with calls to bli_sba_acquire(), which takes a
rntm (in addition to the bytes requested), and bli_sba_release().
These latter two functions reduce to the former two when the sba pools
are disabled at configure-time.
- Added rntm_t* arguments to various cntl_t and thrinfo_t functions, as
required by the new usage of bli_sba_acquire() and _release().
- Moved the freeing of "old" blocks (those allocated prior to a change
in the block_size) from bli_membrk_acquire_m() to the implementation
of the pool_t checkout function.
- Miscellaneous improvements to the pool_t API.
- Added a block_size field to the pblk_t.
- Harmonized the way that the trsm_ukr testsuite module performs packing
relative to that of gemmtrsm_ukr, in part to avoid the need to create
a packm control tree node, which now requires a rntm_t that has been
initialized with an sba and membrk.
- Re-enable explicit call bli_finalize() in testsuite so that users who
run the testsuite with memory tracing enabled can check for memory
leaks.
- Manually imported the compact/minor changes from 61441b24 that cause
the rntm to be copied locally when it is passed in via one of the
expert APIs.
- Reordered parameters to various bli_thrcomm_*() functions so that the
thrcomm_t* to the comm being modified is last, not first.
- Added more descriptive tracing for allocating/freeing small blocks and
formalized via a new configure option: --[dis|en]able-mem-tracing.
- Moved some unused scalm code and headers into frame/1m/other.
- Whitespace changes to bli_pthread.c.
- Regenerated build/libblis-symbols.def.
Details:
- Added malloc_ft and free_ft fields to pool_t, which are provided when
the pool is initialized, to allow bli_pool_alloc_block() and
bli_pool_free_block() to call bli_fmalloc_align()/bli_ffree_align()
with arbitrary align_size values (according to how the pool_t was
initialized).
- Added a block_ptrs_len argument to bli_pool_init(), which allows the
caller to specify an initial length for the block_ptrs array, which
previously suffered the cost of being reallocated, copied, and freed
each time a new block was added to the pool.
- Consolidated the "buf_sys" and "buf_align" pointer fields in pblk_t
into a single "buf" field. Consolidated the bli_pblk API accordingly
and also updated the bli_mem API implementation. This was done
because I'd previously already implemented opaque alignment via
bli_malloc_align(), which allocates extra space and stores the
original pointer returned by malloc() one element before the element
whose address is aligned.
- Tweaked bli_membrk_acquire_m() and bli_membrk_release() to call
bli_fmalloc_align() and bli_ffree_align(), which required adding an
align_size field to the membrk_t struct.
- Pass the pack schemas directly into bli_l3_cntl_create_if() rather
than transmit them via objects for A and B.
- Simplified bli_l3_cntl_free_if() and renamed to bli_l3_cntl_free().
The function had not been conditionally freeing control trees for
quite some time. Also, removed obj_t* parameters since they aren't
needed anymore (or never were).
- Spun-off OpenMP nesting code in bli_l3_thread_decorator() to a
separate function, bli_l3_thread_decorator_thread_check().
- Renamed:
bli_malloc_align() -> bli_fmalloc_align()
bli_free_align() -> bli_ffree_align()
bli_malloc_noalign() -> bli_fmalloc_noalign()
bli_free_noalign() -> bli_ffree_noalign()
The 'f' is for "function" since they each take a malloc_ft or free_ft
function pointer argument.
- Inserted various printf() calls for the purposes of tracing memory
allocation and freeing, guarded by cpp macro ENABLE_MEM_DEBUG, which,
for now, is intended to be a "hidden" feature rather than one hooked
up to a configure-time option.
- Defined bli_rntm_equals(), which compares two rntm_t for equality.
(There are no use cases for this function yet, but there may be soon.)
- Whitespace changes to function parameter lists in bli_pool.c, .h.
Details:
- Removed explicit reference to The University of Texas at Austin in the
third clause of the license comment blocks of all relevant files and
replaced it with a more all-encompassing "copyright holder(s)".
- Removed duplicate words ("derived") from a few kernels' license
comment blocks.
- Homogenized license comment block in kernels/zen/3/bli_gemm_small.c
with format of all other comment blocks.
Details:
- Added debug output to bli_malloc.c in order to debug certain kinds of
memory behavior in BLIS. The printf() statements are disabled and must
be enabled manually.
- Whitespace/comment updates in bli_membrk.c.
Details:
- Removed four trailing spaces after "BLIS" that occurs in most files'
commented-out license headers.
- Added UT copyright lines to some files. (These files previously had
only AMD copyright lines but were contributed to by both UT and AMD.)
- In some files' copyright lines, expanded 'The University of Texas' to
'The University of Texas at Austin'.
- Fixed various typos/misspellings in some license headers.
Details:
- Replaced critical sections that were conditional upon multithreading
being enabled (via pthreads or OpenMP) with unconditional use of
pthreads mutexes. (Why pthreads? Because BLIS already requires it
for its initialization mechanism: pthread_once().) This was done in
bli_error.c, bli_gks.c, bli_l3_ind.c. Also, replaced usage of BLIS's
mtx_t object and bli_mutex_*() API with pthread mutexes in
bli_thread.c. The previous status quo could result in a race condition
if the application called BLIS from more than one thread. The new
pthread-based code should be completely agnostic to the application's
threading configuration. Thanks to AMD for bringing to our attention
the need for a thread-safety review.
- Added an option to the testsuite to simulate application-level
multithreading. Specifically, each thread maintains a counter that is
incremented after each experiment. The thread only executes the
experiment if: counter % n_threads == thread_id. In other words, the
threads simply take turns executing each problem experiment. Also,
POSIX guarantees that fprintf() will not intermingle output, so
output was switched to fprintf() instead of libblis_test_fprintf().
- Changed membrk_t objects to use pthread_mutex_t intead of mtx_t and
replaced use of bli_mutex_init()/_finalize() in bli_membrk.c with
wrappers to pthread_mutex_init()/_destroy().
- Changed the implementation of bli_l3_ind_oper_enable_only() to fix
a race condition; specifically, two threads calling the function with
the same parameters could lead to a non-deterministic outcome.
- Added #include <pthread.h> to bli_cpuid.c and moved the same in
bli_arch.c.
- Added 'const' to declaration of OPT_MARKER in bli_getopt.c.
- Added #include <pthread.h> to bli_system.h.
- Added add-copyright.py script to automate adding new copyright lines
to (and updating existing lines of) source files.
Details:
- Added HP Enterprise to the LICENSE file. Previously, only the source
files touched by HPE contained the corresponding copyright notices.
(This oversight was unintentional.)
- Updated file-level copyright notices to include a comma, to match
the formatting used for UT and AMD copyrights.
Details:
- Added a new configure option, --[en|dis]able-packbuf-pools, which will
enable or disable the use of internal memory pools for managing buffers
used for packing. When disabled, the function specified by the cpp
macro BLIS_MALLOC_POOL is called whenever a packing buffer is needed
(and BLIS_FREE_POOL is called when the buffer is ready to be released,
usually at the end of a loop). When enabled, which was the status quo
prior to this commit, a memory pool data structure is created and
managed to provide threads with packing buffers. The memory pool
minimizes calls to bli_malloc_pool() (i.e., the wrapper that calls
BLIS_MALLOC_POOL), but does so through a somewhat more complex
mechanism that may incur additional overhead in some (but not all)
situations. The new option defaults to --enable-packbuf-pools.
- Removed the reinitialization of the memory pools from the level-3
front-ends and replaced it with automatic reinitialization within the
pool API's implementation. This required an extra argument to
bli_pool_checkout_block() in the form of a requested size, but hides
the complexity entirely from BLIS. And since bli_pool_checkout_block()
is only ever called within a critical section, this change fixes a
potential race condition in which threads using contexts with different
cache blocksizes--most likely a heterogeneous environment--can check
out pool blocks that are too small for the submatrices it wishes to
pack. Thanks to Nisanth Padinharepatt for reporting this potential
issue.
- Removed several functions in light of the relocation of pool reinit,
including bli_membrk_reinit_pools(), bli_memsys_reinit(),
bli_pool_reinit_if(), and bli_check_requested_block_size_for_pool().
- Updated the testsuite to print whether the memory pools are enabled or
disabled.
Details:
- Reworked the build system around a configuration registry file, named
config_registry', that identifies valid configuration targets, their
constituent sub-configurations, and the kernel sets that are needed by
those sub-configurations. The build system now facilitates the building
of a single library that can contains kernels and cache/register
blocksizes for multiple configurations (microarchitectures). Reference
kernels are also built on a per-configuration basis.
- Updated the Makefile to use new variables set by configure via the
config.mk.in template, such as CONFIG_LIST, KERNEL_LIST, and KCONFIG_MAP,
in determining which sub-configurations (CONFIG_LIST) and kernel sets
(KERNEL_LIST) are included in the library, and which make_defs.mk files'
CFLAGS (KCONFIG_MAP) are used when compiling kernels.
- Reorganized 'kernels' directory into a "flat" structure. Renamed kernel
functions into a standard format that includes the kernel set name
(e.g. 'haswell'). Created a "bli_kernels_<kernelset>.h" file in each
kernels sub-directory. These files exist to provide prototypes for the
kernels present in those directories.
- Reorganized reference kernels into a top-level 'ref_kernels' directory.
This directory includes a new source file, bli_cntx_ref.c (compiled on
a per-configuration basis), that defines the code needed to initialize
a reference context and a context for induced methods for the
microarchitecture in question.
- Rewrote make_defs.mk files in each configuration so that the compiler
variables (e.g. CFLAGS) are "stored" (renamed) on a per-configuration
basis.
- Modified bli_config.h.in template so that bli_config.h is generated with
#defines for the config (family) name, the sub-configurations that are
associated with the family, and the kernel sets needed by those
sub-configurations.
- Deprecated all kernel-related information in bli_kernel.h and transferred
what remains to new header files named "bli_arch_<configname>.h", which
are conditionally #included from a new header bli_arch.h. These files
are still needed to set library-wide parameters such as custom
malloc()/free() functions or SIMD alignment values.
- Added bli_cntx_init_<configname>.c files to each configuration directory.
The files contain a function, named the same as the file, that initializes
a "native" context for a particular configuration (microarchitecture). The
idea is that optimized kernels, if available, will be initialized into
these contexts. Other fields will retain pointers to reference functions,
which will be compiled on a per-configuration basis. These bli_cntx_init_*()
functions will be called during the initialization of the global kernel
structure. They are thought of as initializing for "native" execution, but
they also form the basis for contexts that use induced methods. These
functions are prototyped, along with their _ref() and _ind() brethren, by
prototype-generating macros in bli_arch.h.
- Added a new typedef enum in bli_type_defs.h to define an arch_t, which
identifies the various sub-configurations.
- Redesigned the global kernel structure (gks) around a 2D array of cntx_t
structures (pointers to cntx_t, actually). The first dimension is indexed
over arch_t and the inner dimension is the ind_t (induced method) for
each microarchitecture. When a microarchitecture (configuration) is
"registered" at init-time, the inner array for that configuration in the
2D array is initialized (and allocated, if it hasn't been already). The
cntx_t slot for BLIS_NAT is initialized immediately and those for other
induced method types are initialized and cached on-demand, as needed. At
cntx_t registration, we also store function pointers to cntx_init functions
that will initialize (a) "reference" contexts and (b) contexts for use with
induced methods. We don't cache the full contexts for reference contexts
since they are rarely needed. The functions that initialize these two kinds
of contexts are generated automatically for each targeted sub-configuration
from cpp-templatized code at compile-time. Induced method contexts that
need "stage" adjustments can still obtain them via functions in
bli_cntx_ind_stage.c.
- Added new functions and functionality to bli_cntx.c, such as for setting
the level-1f, level-1v, and packm kernels, and for converting a native
context into one for executing an induced method.
- Moved the checking of register/cache blocksize consistency from being cpp
macros in bli_kernel_macro_defs.h to being runtime checks defined in
bli_check.c and called from bli_gks_register_cntx() at the time that the
global kernel structure's internal context is initialized for a given
microarchitecture/configuration.
- Deprecated all of the old per-operation bli_*_cntx.c files and removed
the previous operation-level cntx_t_init()/_finalize() invocations.
Instead, we now query the gks for a suitable context, usually via
bli_gks_query_cntx().
- Deprecated support for the 3m2 and 3m3 induced methods. (They required
hackery that I was no longer willing to support.)
- Consolidated the 1e and 1r packm kernels for any given register blocksize
into a single kernel that will branch on the schema and support packing
to both formats.
- Added the cntx_t* argument to all packm kernel signatures.
- Deprecated the local function pointer array in all bli_packm_cxk*.c files
and instead obtain the packm kernel from the cntx_t.
- Added bli_calloc_intl(), which serves as the calloc-equivalent to to
bli_malloc_intl(). Useful when we wish to allocate and initialize to
zero/NULL.
- Converted existing cpp macro functions defined in bli_blksz.h, bli_func.h,
bli_cntx.h into static functions.
Details:
- Integrated a patch originally authored and submitted by Ricardo Magana
of HP Enterprise. The changeset inserts use of a new object type, membrk_t,
(memory broker) that allows multiple sets of memory pools on, for example,
separate NUMA nodes, each of which has a separate memory space.
- Added membrk field to cntx_t and defined corresponding accessor macros.
- Added membrk field to mem_t object and defined corresponding accessor macros.
- Created new bli_membrk.c file, which contains the new memory broker API,
including:
bli_membrk_init(), bli_membrk_finalize()
bli_membrk_acquire_[mv](), bli_membrk_release(),
bli_membrk_init_pools(), bli_membrk_reinit_pools(),
bli_membrk_finalize_pools(),
bli_membrk_pool_size()
- In bli_mem.c, changed function calls to
bli_mem_init_pools() -> bli_membrk_init()
bli_mem_reinit_pools() -> bli_membrk_reinit()
bli_mem_finalize_pools() -> bli_membrk_finalize()
- In bli_packv_init.c, bli_packm_init.c, changed function calls to:
bli_mem_acquire_[mv]() -> bli_membrk_acquire_[mv]()
bli_mem_release() -> bli_membrk_release()
- Added bli_mutex.c and related files to frame/thread. These files define
abstract mutexes (locks) and corresponding APIs for pthreads, openmp, or
single-threaded execution. This new API is employed within functions
such as bli_membrk_acquire_[mv]() and bli_membrk_release().
