Details:
- Parallelism within the IC loop (3rd loop around the microkernel) is
now supported within the trsm operation. This is done via a new branch
on each of the control and thread trees, which guide execution of a
new trsm-only subproblem from within bli_trsm_blk_var1(). This trsm
subproblem corresponds to the macrokernel computation on only the
block of A that contains the diagonal (labeled as A11 in algorithms
with FLAME-like partitioning), and the corresponding row panel of C.
During the trsm subproblem, all threads within the JC communicator
participate and parallelize along the JR loop, including any
parallelism that was specified for the IC loop. (IR loop parallelism
is not supported for trsm due to inter-iteration dependencies.) After
this trsm subproblem is complete, a barrier synchronizes all
participating threads and then they proceed to apply the prescribed
BLIS_IC_NT (or equivalent) ways of parallelism (and any BLIS_JR_NT
parallelism specified within) to the remaining gemm subproblem (the
rank-k update that is performed using the newly updated row-panel of
B). Thus, trsm now supports JC, IC, and JR loop parallelism.
- Modified bli_trsm_l_cntl_create() to create the new "prenode" branch
of the trsm_l cntl_t tree. The trsm_r tree was left unchanged, for
now, since it is not currently used. (All trsm problems are cast in
terms of left-side trsm.)
- Updated bli_cntl_free_w_thrinfo() to be able to free the newly shaped
trsm cntl_t trees. Fixed a potentially latent bug whereby a cntl_t
subnode is only recursed upon if there existed a corresponding
thrinfo_t node, which may not always exist (for problems too small
to employ full parallelization due to the minimum granularity imposed
by micropanels).
- Updated other functions in frame/base/bli_cntl.c, such as
bli_cntl_copy() and bli_cntl_mark_family(), to recurse on sub-prenodes
if they exist.
- Updated bli_thrinfo_free() to recurse into sub-nodes and prenodes
when they exist, and added support for growing a prenode branch to
bli_thrinfo_grow() via a corresponding set of help functions named
with the _prenode() suffix.
- Added a bszid_t field thrinfo_t nodes. This field comes in handy when
debugging the allocation/release of thrinfo_t nodes, as it helps trace
the "identity" of each nodes as it is created/destroyed.
- Renamed
bli_l3_thrinfo_print_paths() -> bli_l3_thrinfo_print_gemm_paths()
and created a separate bli_l3_thrinfo_print_trsm_paths() function to
print out the newly reconfigured thrinfo_t trees for the trsm
operation.
- Trival changes to bli_gemm_blk_var?.c and bli_trsm_blk_var?.c
regarding variable declarations.
- Removed subpart_t enum values BLIS_SUBPART1T, BLIS_SUBPART1B,
BLIS_SUBPART1L, BLIS_SUBPART1R. Then added support for two new labels
(semantically speaking): BLIS_SUBPART1A and BLIS_SUBPART1B, which
represent the subpartition ahead of and behind, respectively,
BLIS_SUBPART1. Updated check functions in bli_check.c accordingly.
- Shuffled layering/APIs for bli_acquire_mpart_[mn]dim() and
bli_acquire_mpart_t2b/b2t(), _l2r/r2l().
- Deprecated old functions in frame/3/bli_l3_thrinfo.c.
Details:
- Removed explicit reference to The University of Texas at Austin in the
third clause of the license comment blocks of all relevant files and
replaced it with a more all-encompassing "copyright holder(s)".
- Removed duplicate words ("derived") from a few kernels' license
comment blocks.
- Homogenized license comment block in kernels/zen/3/bli_gemm_small.c
with format of all other comment blocks.
Details:
- Removed four trailing spaces after "BLIS" that occurs in most files'
commented-out license headers.
- Added UT copyright lines to some files. (These files previously had
only AMD copyright lines but were contributed to by both UT and AMD.)
- In some files' copyright lines, expanded 'The University of Texas' to
'The University of Texas at Austin'.
- Fixed various typos/misspellings in some license headers.
Details:
- Implemented bli_acquire_mpart(), a general-purpose submatrix view
function that will alias an obj_t to be a submatrix "view" of an
existing obj_t.
- Renumbered examples in examples/oapi and inserted a new example file,
03obj_view.c, which shows how to use bli_acquire_mpart() to obtain
submatrix views of existing objects, which can then be used to
indirectly modify the parent object.
Details:
- Converted most C preprocessor macros in bli_param_macro_defs.h and
bli_obj_macro_defs.h to static functions.
- Reshuffled some functions/macros to bli_misc_macro_defs.h and also
between bli_param_macro_defs.h and bli_obj_macro_defs.h.
- Changed obj_t-initializing macros in bli_type_defs.h to static
functions.
- Removed some old references to BLIS_TWO and BLIS_MINUS_TWO from
bli_constants.h.
- Whitespace changes in select files (four spaces to single tab).
Details:
- Moved amaxv from being a utility operation to being a level-1v operation.
This includes the establishment of a new amaxv kernel to live beside all
of the other level-1v kernels.
- Added two new functions to bli_part.c:
bli_acquire_mij()
bli_acquire_vi()
The first acquires a scalar object for the (i,j) element of a matrix,
and the second acquires a scalar object for the ith element of a vector.
- Added integer support to bli_getsc level-0 operation. This involved
adding integer support to the bli_*gets level-0 scalar macros.
- Added a new test module to test amaxv as a level-1v operation. The test
module works by comparing the value identified by bli_amaxv() to the
the value found from a reference-like code local to the test module
source file. In other words, it (intentionally) does not guarantee the
same index is found; only the same value. This allows for different
implementations in the case where a vector contains two or more elements
containing exactly the same floating point value (or values, in the case
of the complex domain).
- Removed the directory frame/include/old/.
Details:
- These changes constitute the first set of changes in preparation to
revamping the structure and use of control trees in BLIS. Modifications
in this commit don't affect the control tree code yet, but rather lay
the groundwork.
- Defined wrappers for the following functions, where the the wrappers
each take a direction parameter of a new enumerated type (BLIS_BWD or
BLIS_FWD), dir_t, and executes the correct underlying function.
- bli_acquire_mpart_*() and _vpart_*()
- bli_*_determine_kc_[fb]()
- bli_thread_get_range_*() and bli_thread_get_range_weighted_*()
- Consolidated all 'f' (forwards-moving) and 'b' (backwards-moving)
blocked variants for trmm and trsm, and renamed gemm and herk variants
accordingly. The direction is now queried via routines such as
bli_trmm_direct(), which deterines the direction from the implied side
and uplo parameters. For gemm and herk, it is uncondtionally BLIS_FWD.
- Defined wrappers to parameter-specific macrokernels for herk, trmm, and
trsm, e.g. bli_trmm_xx_ker_var2(), that execute the correct underlying
macrokernel based on the implied parameters. The same logic used to
choose the dir_t in _direct() functions is used here.
- Simplified the function pointer arrays in _int() functions given the
consolidation and dir_t querying mentioned above.
- Function signature (whitespace) reformatting for various functions.
- Removed old code in various 'old' directories.
Details:
- Expanded/updated interface for bli_get_range_weighted() and
bli_get_range() so that the direction of movement is specified in the
function name (e.g. bli_get_range_l2r(), bli_get_range_weighted_t2b())
and also so that the object being partitioned is passed instead of an
uplo parameter. Updated invocations in level-3 blocked variants, as
appropriate.
- (Re)implemented bli_get_range_*() and bli_get_range_weighted_*() to
carefully take into account the location of the diagonal when computing
ranges so that the area of each subpartition (which, in all present
level-3 operations, is proportional to the amount of computation
engendered) is as equal as possible.
- Added calls to a new class of routines to all non-gemm level-3 blocked
variants:
bli_<oper>_prune_unref_mparts_[mnk]()
where <oper> is herk, trmm, or trsm and [mnk] is chosen based on which
dimension is being partitioned. These routines call a more basic
routine, bli_prune_unref_mparts(), to prune unreferenced/unstored
regions from matrices and simultaneously adjust other matrices which
share the same dimension accordingly.
- Simplified herk_blk_var2f, trmm_blk_var1f/b as a result of more the
new pruning routines.
- Fixed incorrect blocking factors passed into bli_get_range_*() in
bli_trsm_blk_var[12][fb].c
- Added a new test driver in test/thread_ranges that can exercise the new
bli_get_range_*() and bli_get_range_weighted_*() under a range of
conditions.
- Reimplemented m and n fields of obj_t as elements in a "dim"
array field so that dimensions could be queried via index constant
(e.g. BLIS_M, BLIS_N). Adjusted/added query and modification
macros accordingly.
- Defined mdim_t type to enumerate BLIS_M and BLIS_N indexing values.
- Added bli_round() macro, which calls C math library function round(),
and bli_round_to_mult(), which rounds a value to the nearest multiple
of some other value.
- Added miscellaneous pruning- and mdim_t-related macros.
- Renamed bli_obj_row_offset(), bli_obj_col_offset() macros to
bli_obj_row_off(), bli_obj_col_off().
Details:
- Updated copyright headers to include "at Austin" in the name of the
University of Texas.
- Updated the copyright years of a few headers to 2014 (from 2011 and
2012).
Details:
- Fixed a bug in bli_acquire_mpart_t2b() and bli_acquire_mpart_l2r()
that cause incorrect partitioning when SUBPART0 was requested. This
bug was introduced in 46d3d09d49. Thanks to Bryan for isolating
this bug.
- Removed dupl kernels from kernels/x86_64/3 directory.
- Uncommented beta == 0 optimizaition code in
kernels/x86_64/3/bli_gemm_opt_d4x4.c.
Details:
- Consolidated lower and upper blocked variants for herk and her2k, and
renamed the resulting variants, according to the same changes recently
made to trmm and trsm.
- Implemented support for four new subpartitions types:
BLIS_SUBPART1T
BLIS_SUBPART1B
BLIS_SUBPART1L
BLIS_SUBPART1R
which correspond to "merged" partitions that include the middle "1"
partition as well as either the neighboring "0" or "2" partition. This is
used to clean up code in herk/her2k var2 that attempts to partition away
the strictly zero region above or below the diagonal of a matrix operand
that is being marched through diagonally.
- Added safeguards to herk macro-kernels that skip any leading or trailing
zero region in the panel of C that is passed in. This is now needed given
that herk/her2k var1 no longer partitions off this zero region before
calling the macro-kernel (via bli_her[2]k_int()).
- Updated comments and other whitespace changes to trmm/trsm macro-kernels.
Details:
- This macro is used to determine whether the partitioning routines should
call a corresponding packm_part routine instead. However, it was
unintentionally catching matrices that were marked as "packed" by virtue
of them simply being marked as BLIS_PACKED_UNSPEC in, say, bli_gemv().
The macro has now been renamed to bli_obj_is_panel_packed(), and now only
checks for row or column panel packing. (Note that I first attempted to
fix this bug in a571af816d72.) Thanks to Bryan Marker for reporting the
erroneous behavior that led me to this bug.
Details:
- Changed all filename and function prefixes from 'bl2' to 'bli'.
- Changed the "blis2.h" header filename to "blis.h" and changed all
corresponding #include statements accordingly.
- Fixed incorrect association for Fran in CREDITS file.
