Details:
- Added support for being able to duplicate (broadcast) elements in
memory when packing matrix B (ie: the left-hand operand) in level-3
operations. This turns out advantageous for some architectures that
can afford the cost of the extra bandwidth and somehow benefit from
the pre-broadcast elements (and thus being able to avoid using
broadcast-style load instructions on micro-rows of B in the gemm
microkernel).
- Support optionally disabling right-side hemm and symm. If this occurs,
hemm_r is implemented in terms of hemm_l (and symm_r in terms of
symm_l). This is needed when broadcasting during packing because the
alternative--supporting the broadcast of B while also allowing matrix
B to be Hermitian/symmetric--would be an absolute mess.
- Support alignment factors for packed blocks of A, B, and C separately
(as well as for general-purpose buffers). In addition, we support
byte offsets from those alignment values (which is different from
aligning by align+offset bytes to begin with). The default alignment
values are BLIS_PAGE_SIZE in all four cases, with the offset values
defaulting to zero.
- Pass pack_t schema into bli_?packm_cxk() so that it can be then passed
into the packm kernel, where it will be needed by packm kernels that
perform broadcasts of B, since the idea is that we *only* want to
broadcast when packing micropanels of B and not A.
- Added definition for variadic bli_cntx_set_l3_vir_ukrs(), which can be
used to set custom virtual level-3 microkernels in the cntx_t, which
would typically be done in the bli_cntx_init_*() function defined in
the subconfiguration of interest.
- Added a "broadcast B" kernel function for use with NP/NR = 12/6,
defined in in ref_kernels/1m/bli_packm_cxk_bb_ref.c.
- Added a gemm, gemmtrsm, and trsm "broadcast B" reference kernels
defined in ref_kernels/3/bb. (These kernels have been tested with
double real with NP/NR = 12/6.)
- Added #ifndef ... #endif guards around several macro constants defined
in frame/include/bli_kernel_macro_defs.h.
- Defined a few "broadcast B" static functions in
frame/include/level0/bb for use by "broadcast B"-style packm reference
kernels. For now, only the real domain kernels are tested and fully
defined.
- Output the alignment and offset values for packed blocks of A and B
in the testsuite's "BLIS configuration info" section.
- Comment updates to various files.
- Bumped so_version to 3.0.0.
Details:
- Parallelism within the IC loop (3rd loop around the microkernel) is
now supported within the trsm operation. This is done via a new branch
on each of the control and thread trees, which guide execution of a
new trsm-only subproblem from within bli_trsm_blk_var1(). This trsm
subproblem corresponds to the macrokernel computation on only the
block of A that contains the diagonal (labeled as A11 in algorithms
with FLAME-like partitioning), and the corresponding row panel of C.
During the trsm subproblem, all threads within the JC communicator
participate and parallelize along the JR loop, including any
parallelism that was specified for the IC loop. (IR loop parallelism
is not supported for trsm due to inter-iteration dependencies.) After
this trsm subproblem is complete, a barrier synchronizes all
participating threads and then they proceed to apply the prescribed
BLIS_IC_NT (or equivalent) ways of parallelism (and any BLIS_JR_NT
parallelism specified within) to the remaining gemm subproblem (the
rank-k update that is performed using the newly updated row-panel of
B). Thus, trsm now supports JC, IC, and JR loop parallelism.
- Modified bli_trsm_l_cntl_create() to create the new "prenode" branch
of the trsm_l cntl_t tree. The trsm_r tree was left unchanged, for
now, since it is not currently used. (All trsm problems are cast in
terms of left-side trsm.)
- Updated bli_cntl_free_w_thrinfo() to be able to free the newly shaped
trsm cntl_t trees. Fixed a potentially latent bug whereby a cntl_t
subnode is only recursed upon if there existed a corresponding
thrinfo_t node, which may not always exist (for problems too small
to employ full parallelization due to the minimum granularity imposed
by micropanels).
- Updated other functions in frame/base/bli_cntl.c, such as
bli_cntl_copy() and bli_cntl_mark_family(), to recurse on sub-prenodes
if they exist.
- Updated bli_thrinfo_free() to recurse into sub-nodes and prenodes
when they exist, and added support for growing a prenode branch to
bli_thrinfo_grow() via a corresponding set of help functions named
with the _prenode() suffix.
- Added a bszid_t field thrinfo_t nodes. This field comes in handy when
debugging the allocation/release of thrinfo_t nodes, as it helps trace
the "identity" of each nodes as it is created/destroyed.
- Renamed
bli_l3_thrinfo_print_paths() -> bli_l3_thrinfo_print_gemm_paths()
and created a separate bli_l3_thrinfo_print_trsm_paths() function to
print out the newly reconfigured thrinfo_t trees for the trsm
operation.
- Trival changes to bli_gemm_blk_var?.c and bli_trsm_blk_var?.c
regarding variable declarations.
- Removed subpart_t enum values BLIS_SUBPART1T, BLIS_SUBPART1B,
BLIS_SUBPART1L, BLIS_SUBPART1R. Then added support for two new labels
(semantically speaking): BLIS_SUBPART1A and BLIS_SUBPART1B, which
represent the subpartition ahead of and behind, respectively,
BLIS_SUBPART1. Updated check functions in bli_check.c accordingly.
- Shuffled layering/APIs for bli_acquire_mpart_[mn]dim() and
bli_acquire_mpart_t2b/b2t(), _l2r/r2l().
- Deprecated old functions in frame/3/bli_l3_thrinfo.c.
Details:
- Implemented a sophisticated data structure and set of APIs that track
the small blocks of memory (around 80-100 bytes each) used when
creating nodes for control and thread trees (cntl_t and thrinfo_t) as
well as thread communicators (thrcomm_t). The purpose of the small
block allocator, or sba, is to allow the library to transition into a
runtime state in which it does not perform any calls to malloc() or
free() during normal execution of level-3 operations, regardless of
the threading environment (potentially multiple application threads
as well as multiple BLIS threads). The functionality relies on a new
data structure, apool_t, which is (roughly speaking) a pool of
arrays, where each array element is a pool of small blocks. The outer
pool, which is protected by a mutex, provides separate arrays for each
application thread while the arrays each handle multiple BLIS threads
for any given application thread. The design minimizes the potential
for lock contention, as only concurrent application threads would
need to fight for the apool_t lock, and only if they happen to begin
their level-3 operations at precisely the same time. Thanks to Kiran
Varaganti and AMD for requesting this feature.
- Added a configure option to disable the sba pools, which are enabled
by default; renamed the --[dis|en]able-packbuf-pools option to
--[dis|en]able-pba-pools; and rewrote the --help text associated with
this new option and consolidated it with the --help text for the
option associated with the sba (--[dis|en]able-sba-pools).
- Moved the membrk field from the cntx_t to the rntm_t. We now pass in
a rntm_t* to the bli_membrk_acquire() and _release() APIs, just as we
do for bli_sba_acquire() and _release().
- Replaced all calls to bli_malloc_intl() and bli_free_intl() that are
used for small blocks with calls to bli_sba_acquire(), which takes a
rntm (in addition to the bytes requested), and bli_sba_release().
These latter two functions reduce to the former two when the sba pools
are disabled at configure-time.
- Added rntm_t* arguments to various cntl_t and thrinfo_t functions, as
required by the new usage of bli_sba_acquire() and _release().
- Moved the freeing of "old" blocks (those allocated prior to a change
in the block_size) from bli_membrk_acquire_m() to the implementation
of the pool_t checkout function.
- Miscellaneous improvements to the pool_t API.
- Added a block_size field to the pblk_t.
- Harmonized the way that the trsm_ukr testsuite module performs packing
relative to that of gemmtrsm_ukr, in part to avoid the need to create
a packm control tree node, which now requires a rntm_t that has been
initialized with an sba and membrk.
- Re-enable explicit call bli_finalize() in testsuite so that users who
run the testsuite with memory tracing enabled can check for memory
leaks.
- Manually imported the compact/minor changes from 61441b24 that cause
the rntm to be copied locally when it is passed in via one of the
expert APIs.
- Reordered parameters to various bli_thrcomm_*() functions so that the
thrcomm_t* to the comm being modified is last, not first.
- Added more descriptive tracing for allocating/freeing small blocks and
formalized via a new configure option: --[dis|en]able-mem-tracing.
- Moved some unused scalm code and headers into frame/1m/other.
- Whitespace changes to bli_pthread.c.
- Regenerated build/libblis-symbols.def.
Details:
- Added malloc_ft and free_ft fields to pool_t, which are provided when
the pool is initialized, to allow bli_pool_alloc_block() and
bli_pool_free_block() to call bli_fmalloc_align()/bli_ffree_align()
with arbitrary align_size values (according to how the pool_t was
initialized).
- Added a block_ptrs_len argument to bli_pool_init(), which allows the
caller to specify an initial length for the block_ptrs array, which
previously suffered the cost of being reallocated, copied, and freed
each time a new block was added to the pool.
- Consolidated the "buf_sys" and "buf_align" pointer fields in pblk_t
into a single "buf" field. Consolidated the bli_pblk API accordingly
and also updated the bli_mem API implementation. This was done
because I'd previously already implemented opaque alignment via
bli_malloc_align(), which allocates extra space and stores the
original pointer returned by malloc() one element before the element
whose address is aligned.
- Tweaked bli_membrk_acquire_m() and bli_membrk_release() to call
bli_fmalloc_align() and bli_ffree_align(), which required adding an
align_size field to the membrk_t struct.
- Pass the pack schemas directly into bli_l3_cntl_create_if() rather
than transmit them via objects for A and B.
- Simplified bli_l3_cntl_free_if() and renamed to bli_l3_cntl_free().
The function had not been conditionally freeing control trees for
quite some time. Also, removed obj_t* parameters since they aren't
needed anymore (or never were).
- Spun-off OpenMP nesting code in bli_l3_thread_decorator() to a
separate function, bli_l3_thread_decorator_thread_check().
- Renamed:
bli_malloc_align() -> bli_fmalloc_align()
bli_free_align() -> bli_ffree_align()
bli_malloc_noalign() -> bli_fmalloc_noalign()
bli_free_noalign() -> bli_ffree_noalign()
The 'f' is for "function" since they each take a malloc_ft or free_ft
function pointer argument.
- Inserted various printf() calls for the purposes of tracing memory
allocation and freeing, guarded by cpp macro ENABLE_MEM_DEBUG, which,
for now, is intended to be a "hidden" feature rather than one hooked
up to a configure-time option.
- Defined bli_rntm_equals(), which compares two rntm_t for equality.
(There are no use cases for this function yet, but there may be soon.)
- Whitespace changes to function parameter lists in bli_pool.c, .h.
Details:
- Removed explicit reference to The University of Texas at Austin in the
third clause of the license comment blocks of all relevant files and
replaced it with a more all-encompassing "copyright holder(s)".
- Removed duplicate words ("derived") from a few kernels' license
comment blocks.
- Homogenized license comment block in kernels/zen/3/bli_gemm_small.c
with format of all other comment blocks.
Details:
- Removed four trailing spaces after "BLIS" that occurs in most files'
commented-out license headers.
- Added UT copyright lines to some files. (These files previously had
only AMD copyright lines but were contributed to by both UT and AMD.)
- In some files' copyright lines, expanded 'The University of Texas' to
'The University of Texas at Austin'.
- Fixed various typos/misspellings in some license headers.
Details:
- Changed the void* arguments of the following static functions:
bli_is_aligned_to()
bli_is_unaligned_to()
bli_offset_past_alignment()
to siz_t, and the return type of bli_offset_past_alignment() from
guint_t to siz_t. This allows for more versatile usage of these
functions (e.g. when aligning both pointers and leading dimension).
- Updated all invocations of these functions, mostly in kernels/penryn
but also in kernels/bgq, to include explicit typecasts to siz_t when
pointer arguments are passed in.
- Thanks to Devin Matthews for pointing out this potential bug (via issue
#211).
- Deleted a few trailing spaces in various penryn kernels.
- Removed duplicate instances of the words "derived" and "THEORY" from
various kernel license headers, likely from a malformed recursive sed
performed long ago.
Details:
- Added a new configure option, --[en|dis]able-packbuf-pools, which will
enable or disable the use of internal memory pools for managing buffers
used for packing. When disabled, the function specified by the cpp
macro BLIS_MALLOC_POOL is called whenever a packing buffer is needed
(and BLIS_FREE_POOL is called when the buffer is ready to be released,
usually at the end of a loop). When enabled, which was the status quo
prior to this commit, a memory pool data structure is created and
managed to provide threads with packing buffers. The memory pool
minimizes calls to bli_malloc_pool() (i.e., the wrapper that calls
BLIS_MALLOC_POOL), but does so through a somewhat more complex
mechanism that may incur additional overhead in some (but not all)
situations. The new option defaults to --enable-packbuf-pools.
- Removed the reinitialization of the memory pools from the level-3
front-ends and replaced it with automatic reinitialization within the
pool API's implementation. This required an extra argument to
bli_pool_checkout_block() in the form of a requested size, but hides
the complexity entirely from BLIS. And since bli_pool_checkout_block()
is only ever called within a critical section, this change fixes a
potential race condition in which threads using contexts with different
cache blocksizes--most likely a heterogeneous environment--can check
out pool blocks that are too small for the submatrices it wishes to
pack. Thanks to Nisanth Padinharepatt for reporting this potential
issue.
- Removed several functions in light of the relocation of pool reinit,
including bli_membrk_reinit_pools(), bli_memsys_reinit(),
bli_pool_reinit_if(), and bli_check_requested_block_size_for_pool().
- Updated the testsuite to print whether the memory pools are enabled or
disabled.
Details:
- Fixed implicit typecasting of conj_t to trans_t in bli_[un]packm_cxk.c.
- Properly typecast integer arguments to match format specifier in various
calls to printf() in bli_l3_thrinfo.c, bli_cntx.c, bli_pool.c, and
bli_util_oapi.c.
- Fixed "unsigned less-than-comparison with zero" checks in bli_check.c,
bli_cntx.h.
- Fixed mis-typed enums in bli_cntx.c (e.g., l1mkr_t that should have been
l1fkr_t or l1vkr_t).
- Fixed instances of opid_t value BLIS_GEMM that should have been l3ukr_t
value BLIS_GEMM_UKR in bli_cntx_ref.c.
- NOTE: These issues were identified via compiler warnings when building
BLIS with clang on a rather old installation of OS X:
$ clang --version
Apple LLVM version 5.0 (clang-500.2.79) (based on LLVM 3.3svn)
Target: x86_64-apple-darwin15.2.0
Thread model: posix
Details:
- Replaced all instances of bli_malloc() and bli_free() with one of:
- bli_malloc_pool()/bli_free_pool()
- bli_malloc_user()/bli_free_user()
- bli_malloc_intl()/bli_free_intl()
each of which can be configured to call malloc()/free() substitutes,
so long as the substitute functions have the same function type
signatures as malloc() and free() defined by C's stdlib.h. The _pool()
function is called when allocating blocks for the memory pools (used
for packing buffers, primarily), the _user() function is called when
obj_t's are created (via bli_obj_create() and friends), and the _intl()
function is called for internal use by BLIS, such as when creating
control tree nodes or temporary buffers for manipulating internal data
structures. Substitutes for any of the three types of bli_malloc() may
be specified by #defining the following pairs of cpp macros in
bli_kernel.h:
- BLIS_MALLOC_POOL/BLIS_FREE_POOL
- BLIS_MALLOC_USER/BLIS_FREE_USER
- BLIS_MALLOC_INTL/BLIS_FREE_INTL
to be the name of the substitute functions. (Obviously, the object
code that contains these functions must be provided at link-time.)
These macros default to malloc() and free(). Subsitute functions are
also automatically prototyped by BLIS (in bli_malloc_prototypes.h).
- Removed definitions for bli_malloc() and bli_free().
- Note that bli_malloc_pool() and bli_malloc_user() are now defined in
terms of a new function, bli_malloc_align(), which aligns memory to an
arbitrary (power of two) alignment boundary, but does so manually,
whereas before alignment was performed behind the scenes by
posix_memalign(). Currently, bli_malloc_intl() is defined in terms
of bli_malloc_noalign(), which serves as a simple wrapper to the
designated function that is passed in (e.g. BLIS_MALLOC_INTL).
Similarly, there are bli_free_align() and bli_free_noalign(), which
are used in concert with their bli_malloc_*() counterparts.
Details:
- Retrofitted a new data structure, known as a context, into virtually
all internal APIs for computational operations in BLIS. The structure
is now present within the type-aware APIs, as well as many supporting
utility functions that require information stored in the context. User-
level object APIs were unaffected and continue to be "context-free,"
however, these APIs were duplicated/mirrored so that "context-aware"
APIs now also exist, differentiated with an "_ex" suffix (for "expert").
These new context-aware object APIs (along with the lower-level, type-
aware, BLAS-like APIs) contain the the address of a context as a last
parameter, after all other operands. Contexts, or specifically, cntx_t
object pointers, are passed all the way down the function stack into
the kernels and allow the code at any level to query information about
the runtime, such as kernel addresses and blocksizes, in a thread-
friendly manner--that is, one that allows thread-safety, even if the
original source of the information stored in the context changes at
run-time; see next bullet for more on this "original source" of info).
(Special thanks go to Lee Killough for suggesting the use of this kind
of data structure in discussions that transpired during the early
planning stages of BLIS, and also for suggesting such a perfectly
appropriate name.)
- Added a new API, in frame/base/bli_gks.c, to define a "global kernel
structure" (gks). This data structure and API will allow the caller to
initialize a context with the kernel addresses, blocksizes, and other
information associated with the currently active kernel configuration.
The currently active kernel configuration within the gks cannot be
changed (for now), and is initialized with the traditional cpp macros
that define kernel function names, blocksizes, and the like. However,
in the future, the gks API will be expanded to allow runtime management
of kernels and runtime parameters. The most obvious application of this
new infrastructure is the runtime detection of hardware (and the
implied selection of appropriate kernels). With contexts in place,
kernels may even be "hot swapped" at runtime within the gks. Once
execution enters a level-3 _front() function, the memory allocator will
be reinitialized on-the-fly, if necessary, to accommodate the new
kernels' blocksizes. If another application thread is executing with
another (previously loaded) kernel, it will finish in a deterministic
fashion because its kernel information was loaded into its context
before computation began, and also because the blocks it checked out
from the internal memory pools will be unaffected by the newer threads'
reinitialization of the allocator.
- Reorganized and streamlined the 'ind' directory, which contains much of
the code enabling use of induced methods for complex domain matrix
multiplication; deprecated bli_bsv_query.c and bli_ukr_query.c, as
those APIs' functionality is now mostly subsumed within the global
kernel structure.
- Updated bli_pool.c to define a new function, bli_pool_reinit_if(),
that will reinitialize a memory pool if the necessary pool block size
has increased.
- Updated bli_mem.c to use bli_pool_reinit_if() instead of
bli_pool_reinit() in the definition of bli_mem_pool_init(), and placed
usage of contexts where appropriate to communicate cache and register
blocksizes to bli_mem_compute_pool_block_sizes().
- Simplified control trees now that much of the information resides in
the context and/or the global kernel structure:
- Removed blocksize object pointers (blksz_t*) fields from all control
tree node definitions and replaced them with blocksize id (bszid_t)
values instead, which may be passed into a context query routine in
order to extract the corresponding blocksize from the given context.
- Removed micro-kernel function pointers (func_t*) fields from all
control tree node definitions. Now, any code that needs these function
pointers can query them from the local context, as identified by a
level-3 micro-kernel id (l3ukr_t), level-1f kernel id, (l1fkr_t), or
level-1v kernel id (l1vkr_t).
- Removed blksz_t object creation and initialization, as well as kernel
function object creation and initialization, from all operation-
specific control tree initialization files (bli_*_cntl.c), since this
information will now live in the gks and, secondarily, in the context.
- Removed blocksize multiples from blksz_t objects. Now, we track
blocksize multiples for each blocksize id (bszid_t) in the context
object.
- Removed the bool_t's that were required when a func_t was initialized.
These bools are meant to allow one to track the micro-kernel's storage
preferences (by rows or columns). This preference is now tracked
separately within the gks and contexts.
- Merged and reorganized many separate-but-related functions into single
files. This reorganization affects frame/0, 1, 1d, 1m, 1f, 2, 3, and
util directories, but has the most obvious effect of allowing BLIS
to compile noticeably faster.
- Reorganized execution paths for level-1v, -1d, -1m, and -2 operations
in an attempt to reduce overhead for memory-bound operations. This
includes removal of default use of object-based variants for level-2
operations. Now, by default, level-2 operations will directly call a
low-level (non-object based) loop over a level-1v or -1f kernel.
- Converted many common query functions in blk_blksz.c (renamed from
bli_blocksize.c) and bli_func.c into cpp macros, now defined in their
respective header files.
- Defined bli_mbool.c API to create and query "multi-bools", or
heterogeneous bool_t's (one for each floating-point datatype), in the
same spirit as blksz_t and func_t.
- Introduced two key parameters of the hardware: BLIS_SIMD_NUM_REGISTERS
and BLIS_SIMD_SIZE. These values are needed in order to compute a third
new parameter, which may be set indirectly via the aforementioned
macros or directly: BLIS_STACK_BUF_MAX_SIZE. This value is used to
statically allocate memory in macro-kernels and the induced methods'
virtual kernels to be used as temporary space to hold a single
micro-tile. These values are now output by the testsuite. The default
value of BLIS_STACK_BUF_MAX_SIZE is computed as
"2 * BLIS_SIMD_NUM_REGISTERS * BLIS_SIMD_SIZE".
- Cleaned up top-level 'kernels' directory (for example, renaming the
embarrassingly misleading "avx" and "avx2" directories to "sandybridge"
and "haswell," respectively, and gave more consistent and meaningful
names to many kernel files (as well as updating their interfaces to
conform to the new context-aware kernel APIs).
- Updated the testsuite to query blocksizes from a locally-initialized
context for test modules that need those values: axpyf, dotxf,
dotxaxpyf, gemm_ukr, gemmtrsm_ukr, and trsm_ukr.
- Reformatted many function signatures into a standard format that will
more easily facilitate future API-wide changes.
- Updated many "mxn" level-0 macros (ie: those used to inline double loops
for level-1m-like operations on small matrices) in frame/include/level0
to use more obscure local variable names in an effort to avoid variable
shaddowing. (Thanks to Devin Matthews for pointing these gcc warnings,
which are only output using -Wshadow.)
- Added a conj argument to setm, so that its interface now mirrors that
of scalm. The semantic meaning of the conj argument is to optionally
allow implicit conjugation of the scalar prior to being populated into
the object.
- Deprecated all type-aware mixed domain and mixed precision APIs. Note
that this does not preclude supporting mixed types via the object APIs,
where it produces absolutely zero API code bloat.
Details:
- Changed bli_pool_finalize() so that the freeing begins with the block
at top_index instead of block 0. This allows us to use the function
for terminal finalization as well as temporary cleanup prior to
reinitialization. Also, clear the pool_t struct upon _pool_finalize()
in case it is called in the terminal case with some blocks still
checked out to threads (in which case the threads will see the new
block size as 0 and thus release the block as intended).
- Added bli_pool_reinit(), which calls _pool_finalize() followed by
_pool_init() with new parameters.
- Added bli_mem_reinit(), which is based on bli_pool_reinit().
- Added new wrapper, _mem_compute_pool_block_sizes(), which calls
_mem_compute_pool_block_sizes_dt().
- Updated bli_mem_release() so that the pblk_t is freed, via
_pool_free_block(), if the block size recorded in the mem_t at the
time the pblk_t was acquired is now different from the value in the
pool_t.
Details:
- Fixed a typecasting ambiguity in bli_pool_alloc_block() in which
pointer arithmetic was performed on a void* as if it were a byte
pointer (such as char*). Some compilers may have already been
interpreting this situation as intended, despite the sloppiness.
Thanks to Aleksei Rechinskii for reporting this issue.
- Redefined pointer alignment macros to typecast to uintptr_t instead of
siz_t.
Details:
- Replaced the old memory allocator, which was based on statically-
allocated arrays, with one based on a new internal pool_t type, which,
combined with a new bli_pool_*() API, provides a new abstract data
type that implements the same memory pool functionality but with blocks
from the heap (ie: malloc() or equivalent). Hiding the details of the
pool in a separate API also allows for a much simpler bli_mem.c family
of functions.
- Added a new internal header, bli_config_macro_defs.h, which enables
sane defaults for the values previously found in bli_config. Those
values can be overridden by #defining them in bli_config.h the same
way kernel defaults can be overridden in bli_kernel.h. This file most
resembles what was previously a typical configuration's bli_config.h.
- Added a new configuration macro, BLIS_POOL_ADDR_ALIGN_SIZE, which
defaults to BLIS_PAGE_SIZE, to specify the alignment of individual
blocks in the memory pool. Also added a corresponding query routine to
the bli_info API.
- Deprecated (once again) the micro-panel alignment feature. Upon further
reflection, it seems that the goal of more predictable L1 cache
replacement behavior is outweighed by the harm caused by non-contiguous
micro-panels when k % kc != 0. I honestly don't think anyone will even
miss this feature.
- Changed bli_ukr_get_funcs() and bli_ukr_get_ref_funcs() to call
bli_cntl_init() instead of bli_init().
- Removed query functions from bli_info.c that are no longer applicable
given the dynamic memory allocator.
- Removed unnecessary definitions from configurations' bli_config.h files,
which are now pleasantly sparse.
- Fixed incorrect flop counts in addv, subv, scal2v, scal2m testsuite
modules. Thanks to Devangi Parikh for pointing out these
miscalculations.
- Comment, whitespace changes.
