Details:
- Implemented a new sub-framework within BLIS to support the management
of code and kernels that specifically target matrix problems for which
at least one dimension is deemed to be small, which can result in long
and skinny matrix operands that are ill-suited for the conventional
level-3 implementations in BLIS. The new framework tackles the problem
in two ways. First the stripped-down algorithmic loops forgo the
packing that is famously performed in the classic code path. That is,
the computation is performed by a new family of kernels tailored
specifically for operating on the source matrices as-is (unpacked).
Second, these new kernels will typically (and in the case of haswell
and zen, do in fact) include separate assembly sub-kernels for
handling of edge cases, which helps smooth performance when performing
problems whose m and n dimension are not naturally multiples of the
register blocksizes. In a reference to the sub-framework's purpose of
supporting skinny/unpacked level-3 operations, the "sup" operation
suffix (e.g. gemmsup) is typically used to denote a separate namespace
for related code and kernels. NOTE: Since the sup framework does not
perform any packing, it targets row- and column-stored matrices A, B,
and C. For now, if any matrix has non-unit strides in both dimensions,
the problem is computed by the conventional implementation.
- Implemented the default sup handler as a front-end to two variants.
bli_gemmsup_ref_var2() provides a block-panel variant (in which the
2nd loop around the microkernel iterates over n and the 1st loop
iterates over m), while bli_gemmsup_ref_var1() provides a panel-block
variant (2nd loop over m and 1st loop over n). However, these variants
are not used by default and provided for reference only. Instead, the
default sup handler calls _var2m() and _var1n(), which are similar
to _var2() and _var1(), respectively, except that they defer to the
sup kernel itself to iterate over the m and n dimension, respectively.
In other words, these variants rely not on microkernels, but on
so-called "millikernels" that iterate along m and k, or n and k.
The benefit of using millikernels is a reduction of function call
and related (local integer typecast) overhead as well as the ability
for the kernel to know which micropanel (A or B) will change during
the next iteration of the 1st loop, which allows it to focus its
prefetching on that micropanel. (In _var2m()'s millikernel, the upanel
of A changes while the same upanel of B is reused. In _var1n()'s, the
upanel of B changes while the upanel of A is reused.)
- Added a new configure option, --[en|dis]able-sup-handling, which is
enabled by default. However, the default thresholds at which the
default sup handler is activated are set to zero for each of the m, n,
and k dimensions, which effectively disables the implementation. (The
default sup handler only accepts the problem if at least one dimension
is smaller than or equal to its corresponding threshold. If all
dimensions are larger than their thresholds, the problem is rejected
by the sup front-end and control is passed back to the conventional
implementation, which proceeds normally.)
- Added support to the cntx_t structure to track new fields related to
the sup framework, most notably:
- sup thresholds: the thresholds at which the sup handler is called.
- sup handlers: the address of the function to call to implement
the level-3 skinny/unpacked matrix implementation.
- sup blocksizes: the register and cache blocksizes used by the sup
implementation (which may be the same or different from those used
by the conventional packm-based approach).
- sup kernels: the kernels that the handler will use in implementing
the sup functionality.
- sup kernel prefs: the IO preference of the sup kernels, which may
differ from the preferences of the conventional gemm microkernels'
IO preferences.
- Added a bool_t to the rntm_t structure that indicates whether sup
handling should be enabled/disabled. This allows per-call control
of whether the sup implementation is used, which is useful for test
drivers that wish to switch between the conventional and sup codes
without having to link to different copies of BLIS. The corresponding
accessor functions for this new bool_t are defined in bli_rntm.h.
- Implemented several row-preferential gemmsup kernels in a new
directory, kernels/haswell/3/sup. These kernels include two general
implementation types--'rd' and 'rv'--for the 6x8 base shape, with
two specialized millikernels that embed the 1st loop within the kernel
itself.
- Added ref_kernels/3/bli_gemmsup_ref.c, which provides reference
gemmsup microkernels. NOTE: These microkernels, unlike the current
crop of conventional (pack-based) microkernels, do not use constant
loop bounds. Additionally, their inner loop iterates over the k
dimension.
- Defined new typedef enums:
- stor3_t: captures the effective storage combination of the level-3
problem. Valid values are BLIS_RRR, BLIS_RRC, BLIS_RCR, etc. A
special value of BLIS_XXX is used to denote an arbitrary combination
which, in practice, means that at least one of the operands is
stored according to general stride.
- threshid_t: captures each of the three dimension thresholds.
- Changed bli_adjust_strides() in bli_obj.c so that bli_obj_create()
can be passed "-1, -1" as a lazy request for row storage. (Note that
"0, 0" is still accepted as a lazy request for column storage.)
- Added support for various instructions to bli_x86_asm_macros.h,
including imul, vhaddps/pd, and other instructions related to integer
vectors.
- Disabled the older small matrix handling code inserted by AMD in
bli_gemm_front.c, since the sup framework introduced in this commit
is intended to provide a more generalized solution.
- Added test/sup directory, which contains standalone performance test
drivers, a Makefile, a runme.sh script, and an 'octave' directory
containing scripts compatible with GNU Octave. (They also may work
with matlab, but if not, they are probably close to working.)
- Reinterpret the storage combination string (sc_str) in the various
level-3 testsuite modules (e.g. src/test_gemm.c) so that the order
of each matrix storage char is "cab" rather than "abc".
- Comment updates in level-3 BLAS API wrappers in frame/compat.
* Revert "restore bli_extern_defs exporting for now"
This reverts commit 09fb07c350b2acee17645e8e9e1b8d829c73dca8.
* Remove symbols not intended to be public
* No need of def file anymore
* Fix whitespace
* No need of configure option
* Remove export macro from definitions
* Remove blas export macro from definitions
Details:
- Updated the BLAS compatibility layer for level-3 operations so that
the corresponding BLIS object API is called directly rather than first
calling the typed BLIS API. The previous code based on the typed BLIS
API calls is still available in a deactivated cpp macro branch, which
may be re-activated by #defining BLIS_BLAS3_CALLS_TAPI. (This does not
yet correspond to a configure option. If it seems like people might
want to toggle this behavior more regularly, a configure option can be
added in the future.)
- Updated the BLIS typed API to statically "pre-initialize" objects via
new initializor macros. Initialization is then finished via calls to
static functions bli_obj_init_finish_1x1() and bli_obj_init_finish(),
which are similar to the previously-called functions,
bli_obj_create_1x1_with_attached_buffer() and
bli_obj_create_with_attached_buffer(), respectively. (The BLAS
compatibility layer updates mentioned above employ this new technique
as well.)
- Transformed certain routines in bli_param_map.c--specifically, the
ones that convert netlib-style parameters to BLIS equivalents--into
static functions, now in bli_param_map.h. (The remaining three classes
of conversation routines were left unchanged.)
- Added the aforementioned pre-initializor macros to bli_type_defs.h.
- Relocated bli_obj_init_const() and bli_obj_init_constdata() from
bli_obj_macro_defs.h to bli_type_defs.h.
- Added a few macros to bli_param_macro_defs.h for testing domains for
real/complexness and precisions for single/double-ness.
Details:
- Removed explicit reference to The University of Texas at Austin in the
third clause of the license comment blocks of all relevant files and
replaced it with a more all-encompassing "copyright holder(s)".
- Removed duplicate words ("derived") from a few kernels' license
comment blocks.
- Homogenized license comment block in kernels/zen/3/bli_gemm_small.c
with format of all other comment blocks.
Details:
- Removed four trailing spaces after "BLIS" that occurs in most files'
commented-out license headers.
- Added UT copyright lines to some files. (These files previously had
only AMD copyright lines but were contributed to by both UT and AMD.)
- In some files' copyright lines, expanded 'The University of Texas' to
'The University of Texas at Austin'.
- Fixed various typos/misspellings in some license headers.
Details:
- Defined a new struct datatype, rntm_t (runtime), to house the thrloop
field of the cntx_t (context). The thrloop array holds the number of
ways of parallelism (thread "splits") to extract per level-3
algorithmic loop until those values can be used to create a
corresponding node in the thread control tree (thrinfo_t structure),
which (for any given level-3 invocation) usually happens by the time
the macrokernel is called for the first time.
- Relocating the thrloop from the cntx_t remedies a thread-safety issue
when invoking level-3 operations from two or more application threads.
The race condition existed because the cntx_t, a pointer to which is
usually queried from the global kernel structure (gks), is supposed to
be a read-only. However, the previous code would write to the cntx_t's
thrloop field *after* it had been queried, thus violating its read-only
status. In practice, this would not cause a problem when a sequential
application made a multithreaded call to BLIS, nor when two or more
application threads used the same parallelization scheme when calling
BLIS, because in either case all application theads would be using
the same ways of parallelism for each loop. The true effects of the
race condition were limited to situations where two or more application
theads used *different* parallelization schemes for any given level-3
call.
- In remedying the above race condition, the application or calling
library can now specify the parallelization scheme on a per-call basis.
All that is required is that the thread encode its request for
parallelism into the rntm_t struct prior to passing the address of the
rntm_t to one of the expert interfaces of either the typed or object
APIs. This allows, for example, one application thread to extract 4-way
parallelism from a call to gemm while another application thread
requests 2-way parallelism. Or, two threads could each request 4-way
parallelism, but from different loops.
- A rntm_t* parameter has been added to the function signatures of most
of the level-3 implementation stack (with the most notable exception
being packm) as well as all level-1v, -1d, -1f, -1m, and -2 expert
APIs. (A few internal functions gained the rntm_t* parameter even
though they currently have no use for it, such as bli_l3_packm().)
This required some internal calls to some of those functions to
be updated since BLIS was already using those operations internally
via the expert interfaces. For situations where a rntm_t object is
not available, such as within packm/unpackm implementations, NULL is
passed in to the relevant expert interfaces. This is acceptable for
now since parallelism is not obtained for non-level-3 operations.
- Revamped how global parallelism is encoded. First, the conventional
environment variables such as BLIS_NUM_THREADS and BLIS_*_NT are only
read once, at library initialization. (Thanks to Nathaniel Smith for
suggesting this to avoid repeated calls getenv(), which can be slow.)
Those values are recorded to a global rntm_t object. Public APIs, in
bli_thread.c, are still available to get/set these values from the
global rntm_t, though now the "set" functions have additional logic
to ensure that the values are set in a synchronous manner via a mutex.
If/when NULL is passed into an expert API (meaning the user opted to
not provide a custom rntm_t), the values from the global rntm_t are
copied to a local rntm_t, which is then passed down the function stack.
Calling a basic API is equivalent to calling the expert APIs with NULL
for the cntx and rntm parameters, which means the semantic behavior of
these basic APIs (vis-a-vis multithreading) is unchanged from before.
- Renamed bli_cntx_set_thrloop_from_env() to bli_rntm_set_ways_for_op()
and reimplemented, with the function now being able to treat the
incoming rntm_t in a manner agnostic to its origin--whether it came
from the application or is an internal copy of the global rntm_t.
- Removed various global runtime APIs for setting the number of ways of
parallelism for individual loops (e.g. bli_thread_set_*_nt()) as well
as the corresponding "get" functions. The new model simplifies these
interfaces so that one must either set the total number of threads, OR
set all of the ways of parallelism for each loop simultaneously (in a
single function call).
- Updated sandbox/ref99 according to above changes.
- Rewrote/augmented docs/Multithreading.md to document the three methods
(and two specific ways within each method) of requesting parallelism
in BLIS.
- Removed old, disabled code from bli_l3_thrinfo.c.
- Whitespace changes to code (e.g. bli_obj.c) and docs/BuildSystem.md.
Details:
- Split existing typed APIs into two subsets of interfaces: one for use
with expert parameters, such as the cntx_t*, and one without. This
separation was already in place for the object APIs, and after this
commit the typed and object APIs will have similar expert and non-
expert APIs. The expert functions will be suffixed with "_ex" just as
is the case for expert interfaces in the object APIs.
- Updated internal invocations of typed APIs (functions such as
bli_?setm() and bli_?scalv()) throughout BLIS to reflect use of the
new explictly expert APIs.
- Updated example code in examples/tapi to reflect the existence (and
usage) of non-expert APIs.
- Bumped the major soname version number in 'so_version'. While code
compiled against a previous version/commit will likely still work
(since the old typed function symbol names still exist in the new API,
just with one less function argument) the semantics of the function
have changed if the cntx_t* parameter the application passes in is
non-NULL. For example, calling bli_daxpyv() with a non-NULL context
does not behave the same way now as it did before; before, the
context would be used in the computation, and now the context would
be ignored since the interace for that function no longer expects a
context argument.
Details:
- Renamed the following variables in config.mk (via build/config.mk.in):
BLIS_ENABLE_VERBOSE_MAKE_OUTPUT -> ENABLE_VERBOSE
BLIS_ENABLE_STATIC_BUILD -> MK_ENABLE_STATIC
BLIS_ENABLE_SHARED_BUILD -> MK_ENABLE_SHARED
BLIS_ENABLE_BLAS2BLIS -> MK_ENABLE_BLAS
BLIS_ENABLE_CBLAS -> MK_ENABLE_CBLAS
BLIS_ENABLE_MEMKIND -> MK_ENABLE_MEMKIND
and also renamed all uses of these variables in makefiles and makefile
fragments. Notice that we use the "MK_" prefix so that those variables
can be easily differentiated (such as via grep) from their "BLIS_" C
preprocessor macro counterparts.
- Other whitespace changes to build/config.mk.in.
- Renamed the following C preprocessor macros in bli_config.h (via
build/bli_config.h.in):
BLIS_ENABLE_BLAS2BLIS -> BLIS_ENABLE_BLAS
BLIS_DISABLE_BLAS2BLIS -> BLIS_DISABLE_BLAS
BLIS_BLAS2BLIS_INT_TYPE_SIZE -> BLIS_BLAS_INT_TYPE_SIZE
and also renamed all relevant uses of these macros in BLIS source
files.
- Renamed "blas2blis" variable occurrences in configure to "blas", as
was done in build/config.mk.in and build/bli_config.h.in.
- Renamed the following functions in frame/base/bli_info.c:
bli_info_get_enable_blas2blis() -> bli_info_get_enable_blas()
bli_info_get_blas2blis_int_type_size()
-> bli_info_get_blas_int_type_size()
- Remove bli_config.h during 'make cleanh' target of top-level Makefile.
Details:
- Defined two new functions in bli_init.c: bli_init_once() and
bli_finalize_once(). Each is implemented with pthread_once(), which
guarantees that, among the threads that pass in the same pthread_once_t
data structure, exactly one thread will execute a user-defined function.
(Thus, there is now a runtime dependency against libpthread even when
multithreading is not enabled at configure-time.)
- Added calls to bli_init_once() to top-level user APIs for all
computational operations as well as many other functions in BLIS to
all but guarantee that BLIS will self-initialize through the normal
use of its functions.
- Rewrote and simplified bli_init() and bli_finalize() and related
functions.
- Added -lpthread to LDFLAGS in common.mk.
- Modified the bli_init_auto()/_finalize_auto() functions used by the
BLAS compatibility layer to take and return no arguments. (The
previous API that tracked whether BLIS was initialized, and then
only finalized if it was initialized in the same function, was too
cute by half and borderline useless because by default BLIS stays
initialized when auto-initialized via the compatibility layer.)
- Removed static variables that track initialization of the sub-APIs in
bli_const.c, bli_error.c, bli_init.c, bli_memsys.c, bli_thread, and
bli_ind.c. We don't need to track initialization at the sub-API level,
especially now that BLIS can self-initialize.
- Added a critical section around the changing of the error checking
level in bli_error.c.
- Deprecated bli_ind_oper_has_avail() as well as all functions
bli_<opname>_ind_get_avail(), where <opname> is a level-3 operation
name. These functions had no use cases within BLIS and likely none
outside of BLIS.
- Commented out calls to bli_init() and bli_finalize() in testsuite's
main() function, and likewise for standalone test drivers in 'test'
directory, so that self-initialization is exercised by default.
Details:
- Retrofitted a new data structure, known as a context, into virtually
all internal APIs for computational operations in BLIS. The structure
is now present within the type-aware APIs, as well as many supporting
utility functions that require information stored in the context. User-
level object APIs were unaffected and continue to be "context-free,"
however, these APIs were duplicated/mirrored so that "context-aware"
APIs now also exist, differentiated with an "_ex" suffix (for "expert").
These new context-aware object APIs (along with the lower-level, type-
aware, BLAS-like APIs) contain the the address of a context as a last
parameter, after all other operands. Contexts, or specifically, cntx_t
object pointers, are passed all the way down the function stack into
the kernels and allow the code at any level to query information about
the runtime, such as kernel addresses and blocksizes, in a thread-
friendly manner--that is, one that allows thread-safety, even if the
original source of the information stored in the context changes at
run-time; see next bullet for more on this "original source" of info).
(Special thanks go to Lee Killough for suggesting the use of this kind
of data structure in discussions that transpired during the early
planning stages of BLIS, and also for suggesting such a perfectly
appropriate name.)
- Added a new API, in frame/base/bli_gks.c, to define a "global kernel
structure" (gks). This data structure and API will allow the caller to
initialize a context with the kernel addresses, blocksizes, and other
information associated with the currently active kernel configuration.
The currently active kernel configuration within the gks cannot be
changed (for now), and is initialized with the traditional cpp macros
that define kernel function names, blocksizes, and the like. However,
in the future, the gks API will be expanded to allow runtime management
of kernels and runtime parameters. The most obvious application of this
new infrastructure is the runtime detection of hardware (and the
implied selection of appropriate kernels). With contexts in place,
kernels may even be "hot swapped" at runtime within the gks. Once
execution enters a level-3 _front() function, the memory allocator will
be reinitialized on-the-fly, if necessary, to accommodate the new
kernels' blocksizes. If another application thread is executing with
another (previously loaded) kernel, it will finish in a deterministic
fashion because its kernel information was loaded into its context
before computation began, and also because the blocks it checked out
from the internal memory pools will be unaffected by the newer threads'
reinitialization of the allocator.
- Reorganized and streamlined the 'ind' directory, which contains much of
the code enabling use of induced methods for complex domain matrix
multiplication; deprecated bli_bsv_query.c and bli_ukr_query.c, as
those APIs' functionality is now mostly subsumed within the global
kernel structure.
- Updated bli_pool.c to define a new function, bli_pool_reinit_if(),
that will reinitialize a memory pool if the necessary pool block size
has increased.
- Updated bli_mem.c to use bli_pool_reinit_if() instead of
bli_pool_reinit() in the definition of bli_mem_pool_init(), and placed
usage of contexts where appropriate to communicate cache and register
blocksizes to bli_mem_compute_pool_block_sizes().
- Simplified control trees now that much of the information resides in
the context and/or the global kernel structure:
- Removed blocksize object pointers (blksz_t*) fields from all control
tree node definitions and replaced them with blocksize id (bszid_t)
values instead, which may be passed into a context query routine in
order to extract the corresponding blocksize from the given context.
- Removed micro-kernel function pointers (func_t*) fields from all
control tree node definitions. Now, any code that needs these function
pointers can query them from the local context, as identified by a
level-3 micro-kernel id (l3ukr_t), level-1f kernel id, (l1fkr_t), or
level-1v kernel id (l1vkr_t).
- Removed blksz_t object creation and initialization, as well as kernel
function object creation and initialization, from all operation-
specific control tree initialization files (bli_*_cntl.c), since this
information will now live in the gks and, secondarily, in the context.
- Removed blocksize multiples from blksz_t objects. Now, we track
blocksize multiples for each blocksize id (bszid_t) in the context
object.
- Removed the bool_t's that were required when a func_t was initialized.
These bools are meant to allow one to track the micro-kernel's storage
preferences (by rows or columns). This preference is now tracked
separately within the gks and contexts.
- Merged and reorganized many separate-but-related functions into single
files. This reorganization affects frame/0, 1, 1d, 1m, 1f, 2, 3, and
util directories, but has the most obvious effect of allowing BLIS
to compile noticeably faster.
- Reorganized execution paths for level-1v, -1d, -1m, and -2 operations
in an attempt to reduce overhead for memory-bound operations. This
includes removal of default use of object-based variants for level-2
operations. Now, by default, level-2 operations will directly call a
low-level (non-object based) loop over a level-1v or -1f kernel.
- Converted many common query functions in blk_blksz.c (renamed from
bli_blocksize.c) and bli_func.c into cpp macros, now defined in their
respective header files.
- Defined bli_mbool.c API to create and query "multi-bools", or
heterogeneous bool_t's (one for each floating-point datatype), in the
same spirit as blksz_t and func_t.
- Introduced two key parameters of the hardware: BLIS_SIMD_NUM_REGISTERS
and BLIS_SIMD_SIZE. These values are needed in order to compute a third
new parameter, which may be set indirectly via the aforementioned
macros or directly: BLIS_STACK_BUF_MAX_SIZE. This value is used to
statically allocate memory in macro-kernels and the induced methods'
virtual kernels to be used as temporary space to hold a single
micro-tile. These values are now output by the testsuite. The default
value of BLIS_STACK_BUF_MAX_SIZE is computed as
"2 * BLIS_SIMD_NUM_REGISTERS * BLIS_SIMD_SIZE".
- Cleaned up top-level 'kernels' directory (for example, renaming the
embarrassingly misleading "avx" and "avx2" directories to "sandybridge"
and "haswell," respectively, and gave more consistent and meaningful
names to many kernel files (as well as updating their interfaces to
conform to the new context-aware kernel APIs).
- Updated the testsuite to query blocksizes from a locally-initialized
context for test modules that need those values: axpyf, dotxf,
dotxaxpyf, gemm_ukr, gemmtrsm_ukr, and trsm_ukr.
- Reformatted many function signatures into a standard format that will
more easily facilitate future API-wide changes.
- Updated many "mxn" level-0 macros (ie: those used to inline double loops
for level-1m-like operations on small matrices) in frame/include/level0
to use more obscure local variable names in an effort to avoid variable
shaddowing. (Thanks to Devin Matthews for pointing these gcc warnings,
which are only output using -Wshadow.)
- Added a conj argument to setm, so that its interface now mirrors that
of scalm. The semantic meaning of the conj argument is to optionally
allow implicit conjugation of the scalar prior to being populated into
the object.
- Deprecated all type-aware mixed domain and mixed precision APIs. Note
that this does not preclude supporting mixed types via the object APIs,
where it produces absolutely zero API code bloat.
Details:
- Rewrote bli_init() and bli_finalize() with OpenMP critical sections
for thread-safety. Also added lots of explanatory comments.
- Renamed bli_init_safe() and bli_finalize_safe() with the _auto()
suffix, and reimplemented for simplicity. Updated all invocations
in BLAS compatibility layer to use _auto() suffix.
Details:
- Updated copyright headers to include "at Austin" in the name of the
University of Texas.
- Updated the copyright years of a few headers to 2014 (from 2011 and
2012).
Details:
- Moved the bli_init_safe() and bli_finalize_safe() function calls from the
BLAS-like BLIS layer to the BLAS compatibility layer. Having these auto-
initializers in the BLIS layer wasn't buying us anything because the user
could still call the library with uninitialized global scalar constants,
for example. Thus, we will just have to live with the constraint that
bli_init() MUST be called before calling ANY routine with a bli_ prefix.
- Added the missing _init_safe() and finalize_safe() calls to the level-1
BLAS compatibility wrappers.
Details:
- Added frame/compat/check directory, which now houses companion _check()
routines for each of the BLAS wrappers in frame/compat. These _check()
routines are called from the compatibility wrappers and mimic the
error-checking present in the netlib BLAS.
- Edited bla_xerbla.c so that xerbla() translates the operation string to
uppercase before printing.
- Redefined util routines in frame/compat/f2c/util in terms of level0
macros.
- Added prototypes for util routines, f2c routines, lsame(), and xerbla().
- Commented out prototypes in test/test_*.c since Fortran integers are now
int64_t by default (and the prototypes that were present in the files
used int).
- Removed redundant #include "bli_f2c.h" in bli_?lamch.c and bli_lsame.c,
since blis.h was already being included.
- Other minor changes to code in frame/compat/f2c.
Details:
- Changed the way bli_type_defs.h defines integer types so that dim_t,
inc_t, doff_t, etc. are all defined in terms of gint_t (general signed
integer) or guint_t (general unsigned integer).
- Renamed Fortran types fchar and fint to f77_char and f77_int.
- Define f77_int as int64_t if a new configuration variable,
BLIS_ENABLE_BLIS2BLAS_INT64, is defined, and int32_t otherwise.
These types are defined in stdint.h, which is now included in blis.h.
- Renamed "complex" type in f2c files to "singlecomplex" and typedef'ed
in terms of scomplex.
- Renamed "char" type in f2c files to "character" and typedef'ed in terms
of char.
- Updated bla_amax() wrappers so that the return type is defined directly
as f77_int, rather than letting the prototype-generating macro decide
the type. This was the only use of GENTFUNC2I/GENTPROT2I-related macros,
so I removed them. Also, changed the body of the wrapper so that a
gint_t is passed into abmaxv, which is THEN typecast to an f77_int
before returning the value.
- Updated f2c code that accessed .r and .i fields of complex and
doublecomplex types so that they use .real and .imag instead (now that
we are using scomplex and dcomplex).
Details:
- Changed all filename and function prefixes from 'bl2' to 'bli'.
- Changed the "blis2.h" header filename to "blis.h" and changed all
corresponding #include statements accordingly.
- Fixed incorrect association for Fran in CREDITS file.
Details:
- Added the blas2blis compatibility layer, located in frame/compat. This
includes virtually all of the BLAS, including banded and packed level-2
operations.
- Defined bl2_init_safe(), bl2_finalize_safe(). The former allows a conditional
initialization, which stores the "exit status" in an err_t, which is then
read by the latter function to determine whether finalization should actually
take place.
- Added calls to bl2_init_safe(), bl2_finalize_safe() to all level-2 and
level-3 BLAS-like wrappers.
- Added configuration option to instruct BLIS to remain initialized whenever
it automatically initializes itself (via bl2_init_safe()), until/unless the
application code explicitly calls bl2_finalize().
- Added INSERT_GENTFUNC* and INSERT_GENTPROT* macros to facilitate type
templatization of blas2blis wrappers.
- Defined level-0 scalar macro bl2_??swaps().
- Defined level-1v operation bl2_swapv().
- Defined some "Fortran" types to bl2_type_defs.h for use with BLAS
wrappers.
