Details:
- Parameterized, reorganized, and added comments to matlab scripts in
test/mixeddt/matlab.
- Reordered some lines of code and added comments to plot_l3_perf.m in
test/3m4m/matlab.
Details:
- Updated 3m4m and mixeddt Makefiles and runme.sh scripts, mostly to
port recent changes to the former to the latter.
- Disabled (for now) code in 3m4m/test_*.c files that disables all
induced methods except for the one that is requested from the
Makefile via the IND macro. This is done because usually, we want to
test whatever method is enabled automatically for complex datatypes.
(That is, when native complex microkernels are missing, we usually
want to test performance of 1m.)
Details:
- Removed explicit reference to The University of Texas at Austin in the
third clause of the license comment blocks of all relevant files and
replaced it with a more all-encompassing "copyright holder(s)".
- Removed duplicate words ("derived") from a few kernels' license
comment blocks.
- Homogenized license comment block in kernels/zen/3/bli_gemm_small.c
with format of all other comment blocks.
Details:
- Added a new directory, test/3m4m/matlab, containing matlab scripts for
plotting 4x5 panels of performance graphs (using the subplot()
function) for gemm, hemm, herk, trmm, and trsm across all four
floating-point datatypes. I expect to further refine these scripts as
time goes on, but their current state constitutes a good start.
Details:
- Cleanups to Makefile to allow all test drivers to be built for
OpenBLAS and MKL in addition to BLIS.
- Fixed copy-paste typos in test_hemm in calls to ssymm_() and dsymm_().
- Fixed incorrect types for betap in BLAS cpp macro branch of
test_herk.c.
Details:
- Added a new test_hemm.c test driver to test/3m4m, which was modeled
after the driver by the similar name in test. Also updated Makefile
so that blis-nat-[sm]t would trigger builds for the new driver.
Details:
- Expanded the bli_pthread_*() -> pthread_*() wrappers in
frame/thread/bli_pthread.c to include cases for Windows taken from
frame/base/bli_pthread_wrap.c. Now, bli_thread_*() is always defined
and always used by BLIS and the BLIS testsuite (in lieu of calling
pthreads directly, as before). The implementation used in this new
API depends on whether we are building for Windows, and to a lesser
extent, whether we are building on OS X. For the core API, Windows
uses Windows threads, non-Windows (Linux, OS X) uses pthreads.
OS X and Windows get barriers implemented in terms of other
bli_pthread_*() functions, and Linux gets barriers implemented in
terms of pthread_barrier*(). This commit addresses issue #273.
- Fixed a bug in the Linux definition of bli_pthread_mutex_unlock(),
which was erroneously calling pthread_mutex_lock().
- Minor changes to configure so that the auto-detection executable
can be built given the above changes (most notably, turning on
POSIX extensions via -D_GNU_SOURCE).
- Removed temporary play-test code for shiftd that accidentally got
committed into test/3m4m/test_gemm.c.
Details:
- Defined a new level-1d operation called 'shiftd', including object and
typed APIs. This operation adds a scalar value to every element along
an arbitrary diagonal of a matrix. Currently, shiftd is implemented in
terms of the addv kernel. (The scalar is passed in as the x vector
with an increment of zero.)
- Replaced ad-hoc usage of setd and addd (after creating a temporary
matrix object) with use of shiftd, which is much more concise, in
various test driver files in the testsuite. Similar changes were made
to the standalone test drivers and the example code.
- Added documentation entries in BLISObjectAPI.md and BLISTypedAPI.md
for bli_shiftd() and bli_?shiftd(), respectively.
- Added observed object properties to level-1d documentation in
BLISObjectAPI.md.
Details:
- Implemented support for gemm where A, B, and C may have different
storage datatypes, as well as a computational precision (and implied
computation domain) that may be different from the storage precision
of either A or B. This results in 128 different combinations, all
which are implemented within this commit. (For now, the mixed-datatype
functionality is only supported via the object API.) If desired, the
mixed-datatype support may be disabled at configure-time.
- Added a memory-intensive optimization to certain mixed-datatype cases
that requires a single m-by-n matrix be allocated (temporarily) per
call to gemm. This optimization aims to avoid the overhead involved in
repeatedly updating C with general stride, or updating C after a
typecast from the computation precision. This memory optimization may
be disabled at configure-time (provided that the mixed-datatype
support is enabled in the first place).
- Added support for testing mixed-datatype combinations to testsuite.
The user may test gemm with mixed domains, precisions, both, or
neither.
- Added a standalone test driver directory for building and running
mixed-datatype performance experiments.
- Defined a new variation of castm, castnzm, which operates like castm
except that imaginary values are not touched when casting a real
operand to a complex operand. (By contrast, in these situations castm
sets the imaginary components of the destination matrix to zero.)
- Defined bli_obj_imag_is_zero() and substituted calls in lieu of all
usages of bli_obj_imag_equals() that tested against BLIS_ZERO, and
also simplified the implementation of bli_obj_imag_equals().
- Fixed bad behavior from bli_obj_is_real() and bli_obj_is_complex()
when given BLIS_CONSTANT objects.
- Disabled dt_on_output field in auxinfo_t structure as well as all
accessor functions. Also commented out all usage of accessor
functions within macrokernels. (Typecasting in the microkernel is
still feasible, though probably unrealistic for now given the
additional complexity required.)
- Use void function pointer type (instead of void*) for storing function
pointers in bli_l0_fpa.c.
- Added documentation for using gemm with mixed datatypes in
docs/MixedDatatypes.md and example code in examples/oapi/11gemm_md.c.
- Defined level-1d operation xpbyd and level-1m operation xpbym.
- Added xpbym test module to testsuite.
- Updated frame/include/bli_x86_asm_macros.h with additional macros
(courtsey of Devin Matthews).
Details:
- Adjusted the method by which micropanels are assigned to threads in
the 2nd (jr) and 1st (ir) loops around the microkernel to (mostly)
employ contiguous "slab" partitioning rather than interleaved (round
robin) partitioning. The new partitioning schemes and related details
for specific families of operations are listed below:
- gemm: slab partitioning.
- herk: slab partitioning for region corresponding to non-triangular
region of C; round robin partitioning for triangular region.
- trmm: slab partitioning for region corresponding to non-triangular
region of B; round robin partitioning for triangular region.
(NOTE: This affects both left- and right-side macrokernels:
trmm_ll, trmm_lu, trmm_rl, trmm_ru.)
- trsm: slab partitioning.
(NOTE: This only affects only left-side macrokernels trsm_ll,
trsm_lu; right-side macrokernels were not touched.)
Also note that the previous macrokernels were preserved inside of
the 'other' directory of each operation family directory (e.g.
frame/3/gemm/other, frame/3/herk/other, etc).
- Updated gemm macrokernel in sandbox/ref99 in light of above changes
and fixed a stale function pointer type in blx_gemm_int.c
(gemm_voft -> gemm_var_oft).
- Added standalone test drivers in test/3m4m for herk, trmm, and trsm
and minor changes to test/3m4m/Makefile.
- Updated the arguments and definitions of bli_*_get_next_[ab]_upanel()
and bli_trmm_?_?r_my_iter() macros defined in bli_l3_thrinfo.h.
- Renamed bli_thread_get_range*() APIs to bli_thread_range*().
Details:
- Tweaked the cflags functions in common.mk so that a new preprocessor
macro, BLIS_IS_BUILDING_LIBRARY, is defined, but only when BLIS
itself is being built. This macro will not be defined when, for
example, the testsuite or example code compiles code local to those
applications. This was done in part by defining a new cflags function
get-user-cflags-for(), which is now the designated function for
application Makefiles if they wish to inherit a basic set of CFLAGS
from BLIS. (The compiler flags returned are identical to that of
get-frame-cflags-for() except that -DBLIS_IS_BUILDING_LIBRARY is
omitted.)
- Updated all test driver-like makefiles to call get-user-cflags-for()
instead of get-frame-cflags-for().
Details:
- Removed four trailing spaces after "BLIS" that occurs in most files'
commented-out license headers.
- Added UT copyright lines to some files. (These files previously had
only AMD copyright lines but were contributed to by both UT and AMD.)
- In some files' copyright lines, expanded 'The University of Texas' to
'The University of Texas at Austin'.
- Fixed various typos/misspellings in some license headers.
Details:
- Updated the build system so that "lesser" Makefiles, such as those in
belonging to example code or the testsuite, may be run even if the
directory is orphaned from the original build tree. This allows a
user to configure, compile, and install BLIS, delete the build tree
(that is, the source distribution, or the build directory for out-
of-tree builds) and then compile example or testsuite code and link
against the installed copy of BLIS (provided the example or testsuite
directory was preserved or obtained from another source). The only
requirement is that make be invoked while setting the
BLIS_INSTALL_PATH variable to the same installation prefix used when
BLIS was configured. The easiest syntax is:
make BLIS_INSTALL_PATH=/install/prefix
though it's also permissible to set BLIS_INSTALL_PATH as an
environment variable prior to running 'make'.
- Updated all lesser Makefiles to implement the new aforementioned build
behavior.
- Relocated check-blastest.sh and check-blistest.sh from build to
blastest and testsuite, respectively, so that if those directories are
copied elsewhere the user can still run 'make check' locally.
- Updated docs/Testsuite.md with language that mentions this new option
of building/linking against an installed copy of BLIS.
Details:
- Removed the dtime (delta time, or wallclock time) column from the
matlab output of all test drivers in test, test/3m4m, test/studies.
This value was rarely (if ever) really needed and usually only served
to take up screen space.
- Updated format specifier in test/studies/skx to use %7.2f instead of
%6.3f.
- For the test drivers in 'test' directory, added an initial line of
output that sets last entry of matlab matrix to zero in order to
induce a pre-allocation of the entire array of performance results.
Details:
- Changed the format specifier for the gflops column in the testsuite
output from %7.3f to %7.2f. This was done mainly to keep the output
aligned properly when the expected perfomance exceeded 1000 gflops.
Also, two decimal places still conveys plenty of precision for all
practical applications, including just eyeballing performance deltas
between two executions (let alone two implementations).
- Changed the format specifier for gflops in the test/3m4m drivers
from %6.3f to %7.2f (for the same reasons listed above).
Details:
- Minor edits to sandbox/ref99/README.md.
- Removed cpp guards in sandbox/ref99/thread/blx_gemm_thread.h to be
consistent with other headers in sandbox/ref99.
- Additional targets and related cleanups in test/3m4m/Makefile.
Details:
- Converted most C preprocessor macros in bli_param_macro_defs.h and
bli_obj_macro_defs.h to static functions.
- Reshuffled some functions/macros to bli_misc_macro_defs.h and also
between bli_param_macro_defs.h and bli_obj_macro_defs.h.
- Changed obj_t-initializing macros in bli_type_defs.h to static
functions.
- Removed some old references to BLIS_TWO and BLIS_MINUS_TWO from
bli_constants.h.
- Whitespace changes in select files (four spaces to single tab).
Details:
- Imported the 24x16 knl sgemm microkernel (and its corresonding spackm
kernel) from TBLIS and enabled its use in the knl sub-config. Also
Added sgemm microkernel prototype to bli_kernels_knl.h.
- Updated dgemm and dpackm microkernels from TBLIS, which included an
important change regarding the offsets array (changed from extern
declaration to static declaration/definition).
- Activated use of level-1v and -1f zen kernels in skx and knl
sub-configs.
- Removed some old macros no longer needed in bli_family_skx.h now that
libmemkind support exists in configure.
- Moved bli_avx512_macros.h to frame/include and adjusted #includes in
skx and knl kernels accordingly.
- Moved unused kernels in kernels/knl/3 to kernels/knl/3/other
directory.
- Fixed a minor bug in the 'make' output per compile when verboseness
is not turned on. The rule-generating function 'make-kernel-rule' was
previously passing in the name of the config, rather than the name of
the kernel set returned by get-config-for-kset, which could give
misleading information to the user when the kconfig_map mapped a
kernel set to a sub-configuration that did not share the same name.
(This didn't affect the CFLAGS that were actually used.)
- Updated test/3m4m/Makefile, removing acml targets and renaming the
remaining targets.
Details:
- Added logic to common.mk that will choose a BLIS library against which
to link (LIBBLIS_LINK). The default choice is the static (.a) library;
the shared (.so) library is chosen only if the shared library build was
enabled and the static one was disabled.
- Updated the various test driver Makefiles to reference this common,
pre-chosen library against which to link. (Previously, these drivers
unconditionally linked against the static library and would have
failed if the static library build was disabled at configure-time.)
- Renamed many of the variables in common.mk and the top-level Makefile
so that variables relating to the libblis.[a|so] files, including
paths to those files, begin with "LIBBLIS".
- Shuffled around some of the library definitions from the top-level
Makefile to common.mk.
- Renamed BLIS_ENABLE_DYNAMIC_BUILD to BLIS_ENABLE_SHARED_BUILD, and
the @enable_dynamic@ anchor to @enable_shared@ in build/config.mk.in
and in configure.
- A few other cleanups in the top-level Makefile.
Details:
- Fixed a makefile error encountered when building the testsuite directly
in its directory (as opposed to indirectly via 'make test'). The fix
involves introducing a new variable, BUILD_PATH, alongside the existing
DIST_PATH variable. By default, BUILD_PATH is set to the current
directory, and is overridden by other Makefiles used by, for example,
the testsuite and standalone test drivers in testsuite or test,
respectively.
- Some files/directories in common.mk were redefined in terms of
BUILD_DIR, such as the locations of config.mk file and the intermediate
include directory.
Details:
- Defined two new functions in bli_init.c: bli_init_once() and
bli_finalize_once(). Each is implemented with pthread_once(), which
guarantees that, among the threads that pass in the same pthread_once_t
data structure, exactly one thread will execute a user-defined function.
(Thus, there is now a runtime dependency against libpthread even when
multithreading is not enabled at configure-time.)
- Added calls to bli_init_once() to top-level user APIs for all
computational operations as well as many other functions in BLIS to
all but guarantee that BLIS will self-initialize through the normal
use of its functions.
- Rewrote and simplified bli_init() and bli_finalize() and related
functions.
- Added -lpthread to LDFLAGS in common.mk.
- Modified the bli_init_auto()/_finalize_auto() functions used by the
BLAS compatibility layer to take and return no arguments. (The
previous API that tracked whether BLIS was initialized, and then
only finalized if it was initialized in the same function, was too
cute by half and borderline useless because by default BLIS stays
initialized when auto-initialized via the compatibility layer.)
- Removed static variables that track initialization of the sub-APIs in
bli_const.c, bli_error.c, bli_init.c, bli_memsys.c, bli_thread, and
bli_ind.c. We don't need to track initialization at the sub-API level,
especially now that BLIS can self-initialize.
- Added a critical section around the changing of the error checking
level in bli_error.c.
- Deprecated bli_ind_oper_has_avail() as well as all functions
bli_<opname>_ind_get_avail(), where <opname> is a level-3 operation
name. These functions had no use cases within BLIS and likely none
outside of BLIS.
- Commented out calls to bli_init() and bli_finalize() in testsuite's
main() function, and likewise for standalone test drivers in 'test'
directory, so that self-initialization is exercised by default.
Details:
- Fixed semi-broken testsuite Makefile and very-broken test driver Makefiles,
as well as those for test/3m4m, test/thread_ranges, and test/exec_sizes
sub-directories.
- Factored out much of the top-level Makefile into common.mk. A Makefile
needs only set DIST_PATH to the relative path to the top level of the
BLIS source distribution before including common.mk in order to acquire
all of the definitions typically needed in a Makefile that tests BLIS.
Details:
- Commented out code in frame/ind/oapi/bli_l3_3m4m1m_oapi.c that was
specifically inserted to facilitate the benchmarking of 1m block-panel
and panel-block algorithms.
- Updates to test/3m4m/Makefile, runme.sh script, and test_gemm.c to
reflect changes used/needed during benchmarking.
Details:
- Implemented the 1m method for inducing complex domain matrix
multiplication. 1m support has been added to all level-3 operations,
including trsm, and is now the default induced method when native
complex domain gemm microkernels are omitted from the configuration.
- Updated _cntx_init() operations to take a datatype parameter. This was
needed for the corresponding function for 1m (because 1m requires us
to choose between column-oriented or row-oriented execution, which
requires us to query the context for the storage preference of the
gemm microkernel, which requires knowing the datatype) but I decided
that it made sense for consistency to add the parameter to all other
cntx initialization functions as well, even though those functions
don't use the parameter.
- Updated bli_cntx_set_blkszs() and bli_gks_cntx_set_blkszs() to take
a second scalar for each blocksize entry. The semantic meaning of the
two scalars now is that the first will scale the default blocksize
while the second will scale the maximum blocksize. This allows scaling
the two independently, and was needed to support 1m, which requires
scaling for a register blocksize but not the register storage
blocksize (ie: "packdim") analogue.
- Deprecated bli_blksz_reduce_dt_to() and defined two new functions,
bli_blksz_reduce_def_to() and bli_blksz_reduce_max_to(), for reducing
default and maximum blocksizes to some desired blocksize multiple.
These functions are needed in the updated definitions of
bli_cntx_set_blkszs() and bli_gks_cntx_set_blkszs().
- Added support for the 1e and 1r packing schemas to packm, including
1e/1r packing kernels.
- Added a minor optimization to bli_gemm_ker_var2() that allows, under
certain circumstances (specifically, real domain beta and row- or
column-stored matrix C), the real domain macrokernel and microkernel
to be called directly, rather than using the virtual microkernel
via the complex domain macrokernel, which carries a slight additional
amount of overhead.
- Added 1m support to the testsuite.
- Added 1m support to Makefile and runme.sh in test/3m4m. Also simplified
some code in test_gemm.c driver.
Details:
- Relaxed the base pointer and leading dimension alignment restrictions
in the sandybridge gemm microkernels, allowing the use of vmovups/vmovupd
instead of vmovaps/vmovapd. These change mimic those made to the haswell
microkernels in e0d2fa0 and ee2c139.
- Updated testsuite modules as well as standalone test drivers in 'test'
directory to use DBL_MAX as the initial time candidate. Thanks to Devin
Matthews for suggesting this change.
- Inserted #include "float.h" into bli_system.h (to gain access to DBL_MAX).
- Minor update (vis-a-vis contexts) to driver code in test/3m4m.
Details:
- Added two new sets of [sd]gemm micro-kernels for haswell architectures,
one that is 4x24/4x12 (s and d) and one that is 6x16/6x8.
- Changed the haswell configuration to use the 6x16/6x8 micro-kernels
by default.
- Updated various Makefiles, in test, test/3m4m, and testsuite.
Details:
- Fixed typos in README.md.
- Fixed column heading alignment for testsuite when matlab output is
enabled.
- Minor updates to test/3m4m/runme.sh and test/3m4m/Makefile.
Details:
- Updated test/3m4m driver files to build test drivers that allow
comparision of real "asm_blis" results to complex "asm_blis" results,
except with the latter's problem sizes adjusted so that problems are
generated with equal flop counts.
Details:
- Added a line of output that forces matlab to allocate the entire array
up-front.
- Re-enabled real domain benchmarks in runme.sh, which were temporarily
disabled.
Details:
- Fixed incorrect number of mc_x_kc memory blocks in
sandybridge/bli_config.h.
- Enabled OpenMP multithreding in piledriver/bli_config.h.
- More updates to test/3m4m driver files.
Details:
- Enable OpenMP support by default in sandybridge's bli_config.h.
- Reorganized sandybridge's bli_kernel.h.
- Updated 3m4m Makefile, runme.sh to also test MKL implementation.
Details:
- Defined a new "3ms" (separated 3m) pack schema and added appropriate
support in packm_init(), packm_blk_var2().
- Generalized packm_struc_cxk_3mi to take the imaginary stride (is_p)
as an argument instead of computing it locally. Exception: for trmm,
is_p must be computed locally, since it changes for triangular
packed matrices. Also exposed is_p in interface to dt-specific
packm_blk_var2 (and _var1, even though it does not use imaginary
stride).
- Renamed many functions/variables from _3mi to _3mis to indicate that
they work for either interleaved or separated 3m pack schemas.
- Generalized gemm and herk macro-kernels to pass in imaginary stride
rather than compute them locally.
- Added support for 3m2 and 3m3 algorithms to frame/ind, including 3m2-
and 3m3-specific virtual micro-kernels.
- Added special gemm macro-kernels to support 3m2 and 3m3.
- Added support for 3m2 and 3m3 to testsuite.
- Corrected the type of the panel dimension (pd_) in various macro-
kernels from inc_t to dim_t.
- Renamed many functions defined in bli_blocksize.c.
- Moved most induced-related macro defs from frame/include to
frame/ind/include.
- Updated the _ukernel.c files so that the micro-kernel function pointers
are obtained from the func_t objects rather than the cpp macros that
define the function names.
- Updated test/3m4m driver, Makefile, and run script.
Details:
- Renamed all remaining 3m/4m packing files and symbols to 3mi/4mi
('i' for "interleaved"). Similar changes to 3M/4M macros.
- Renamed all 3m/4m files and functions to 3m1/4m1.
- Whitespace changes.
Details:
- Changed gemm_kc blocksizes to be reduced by two-thirds instead of
half.
- Changed 3m4m/test_gemm.c driver to divide by 3 instead of 2 when
computing the fixed k dimension.
- Fixed runme.sh so that it would use multiple threads for s/dgemm
cases.
Details:
- Added a modified test driver for [cz]gemm that will test all 3m/4m
as well as assembly-based and OpenBLAS implementations of gemm
in single and multithreaded modes.
