Previously, this was a global variable. Setting the value was synchronized via a mutex but reading the value was not. Of course, these accesses are almost certainly atomic, but there is still the possibility of one thread attempting to set the value and then reading the value set by another thread. For correct operation under user threading (e.g. pthreads), this should probably be thread-local with no mutex.
Details:
- Reworked support for ARM hardware detection in bli_cpuid.c to parse
the result of a CPUID-like instruction.
- Added a64fx support to bli_gks.c.
- #include arm64 and arm32 family headers from bli_arch_config.h.
- Fix the ordering of the "armsve" and "a64fx" strings in the
config_name string array in bli_arch.c. The ordering did not match
the ordering of the corresponding arch_t values in bli_type_defs.h,
as it should have all along.
- Added clang support to make_defs.mk in arm64, cortexa53, cortexa57
subconfigs.
- Updated arm64 and arm32 families in config_registry.
- Updated docs/HardwareSupport.md to reflect added ARM support.
- Thanks to Dave Love, RuQing Xu, and Devin Matthews for their
contributions in this PR (#344).
Details:
- Re-enabled the changes made in fb93d24.
- Defined BLIS_ENABLE_SYSTEM in bli_arch.c, bli_cpuid.c, and bli_env.c,
all of which needed the definition (in addition to config_detect.c) in
order for the configure-time hardware detection binary to be compiled
properly. Thanks to Minh Quan Ho for helping identify these additional
files as needing to be updated.
- Added additional comments to all four source files, most notably to
prompt the reader to remember to update all of the files when updating
any of the files. Also made the cpp code in each of the files as
consistent/similar as possible.
- Refer to issues #532 and PR #546 for more history.
- There was redundance between the macro BLIS_MAX_NUM_ERR_MSGS (=200) and
the enum BLIS_ERROR_CODE_MAX (-170), while they both mean the same thing:
the maximal number of error codes/messages.
- The previous initialization of error messages at compile time ignored that
the 'bli_error_string' array still occupies useless memory due to 2D char[][]
declaration. Instead, it should be just an array of pointers, pointing at
strings in .rodata section.
- This commit does the two modifications:
* retired macros BLIS_MAX_NUM_ERR_MSGS and BLIS_MAX_ERR_MSG_LENGTH everywhere
* switch bli_error_string from char[][] to char *[] to reduce its footprint
from 40KB (200*200) to 1.3KB (170*sizeof(char*)).
(No problem to use the enum BLIS_ERROR_CODE_MAX at compile-time,
since compiler is smart enough to determine its value is 170.)
Details:
- Disabled a sanity check in bli_pool_finalize() that was meant to alert
the user if a pool_t was being finalized while some blocks were still
checked out. However, this is exactly the situation that might happen
when a pool_t is re-initialized for a larger blocksize, and currently
bli_pool_reinit() is implemeneted as _finalize() followed by _init().
So, this sanity check is not universally appropriate. Thanks to
AMD-India for reporting this issue.
Details:
- Fixed a compile-time error in bli_init.c when compiling with OSX's
clang. This error was introduced in 868b901, which introduced a
post-declaration struct assignment where the RHS was a struct
initialization expression (i.e. { ... }). This use of struct
initializer expressions apparently works with gcc despite it not
being strict C99. The fix included in this commit declares a temporary
variable for the purposes of being initialized to the desired value,
via the struct initializer, and then copies the temporary struct (via
'=' struct assignment) to the persistent struct. Thanks to Devin
Matthews for his help with this.
Details:
- Fixes a rather obvious bug that resulted in segmentation fault
whenever the calling application tried to re-initialize BLIS after
its first init/finalize cycle. The bug resulted from the fact that
the bli_init.c APIs made no effort to allow bli_init() to be called
subsequent times at all due to it, and bli_finalize(), being
implemented in terms of pthread_once(). This has been fixed by
resetting the pthread_once_t control variable for initialization
at the end of bli_finalize_apis(), and by resetting the control
variable for finalization at the end of bli_init_apis(). Thanks to
@lschork2 for reporting this issue (#525), and to Minh Quan Ho and
Devin Matthews for suggesting the chosen solution.
- CREDITS file update.
Details:
- Added 512-bit specific 'a64fx' subconfiguration that uses empirically
tuned block size by Stepan Nassyr. This subconfig also sets the sector
cache size and enables memory-tagging code in SVE gemm kernels. This
subconfig utilizes (16, k) and (10, k) DPACKM kernels.
- Added a vector-length agnostic 'armsve' subconfiguration that computes
blocksizes according to the analytical model. This part is ported from
Stepan Nassyr's repository.
- Implemented vector-length-agnostic [d/s/sh] gemm kernels for Arm SVE
at size (2*VL, 10). These kernels use unindexed FMLA instructions
because indexed FMLA takes 2 FMA units in many implementations.
PS: There are indexed-FLMA kernels in Stepan Nassyr's repository.
- Implemented 512-bit SVE dpackm kernels with in-register transpose
support for sizes (16, k) and (10, k).
- Extended 256-bit SVE dpackm kernels by Linaro Ltd. to 512-bit for
size (12, k). This dpackm kernel is not currently used by any
subconfiguration.
- Implemented several experimental dgemmsup kernels which would
improve performance in a few cases. However, those dgemmsup kernels
generally underperform hence they are not currently used in any
subconfig.
- Note: This commit squashes several commits submitted by RuQing Xu via
PR #424.
Details:
- Defined eqsc, eqv, and eqm operations, which set a bool depending on
whether the two scalars, two vectors, or two matrix operands are equal
(element-wise). eqsc and eqv support implicit conjugation and eqm
supports diagonal offset, diag, uplo, and trans parameters (in a
manner consistent with other level-1m operations). These operations
are currently housed under frame/util, at least for now, because they
are not computational in nature.
- Redefined bli_obj_equals() in terms of eqsc, eqv, and eqm.
- Documented eqsc, eqv, and eqm in BLISObjectAPI.md and BLISTypedAPI.md.
Also:
- Documented getsc and setsc in both docs.
- Reordered entry for setijv in BLISTypedAPI.md, and added separator
bars to both docs.
- Added missing "Observed object properties" clauses to various
levle-1v entries in BLISObjectAPI.md.
- Defined bli_apply_trans() in bli_param_macro_defs.h.
- Defined supporting _check() function, bli_l0_xxbsc_check(), in
bli_l0_check.c for eqsc.
- Programming style and whitespace updates to bli_l1m_unb_var1.c.
- Whitespace updates to bli_l0_oapi.c, bli_l1m_oapi.c
- Consolidated redundant macro redefinition for copym function pointer
type in bli_l1m_ft.h.
- Added macros to bli_oapi_ba.h, _ex.h, and bli_tapi_ba.h, _ex.h that
allow oapi and tapi source files to forego defining certain expert
functions. (Certain operations such as printv and printm do not need
to have both basic expert interfaces. This also includes eqsc, eqv,
and eqm.)
Details:
- Added new implementations of bli_slamch() and bli_dlamch() that use
constants from the standard C library in lieu of dynamically-computed
values (via code inherited from netlib). The previous implementation
is still available when the cpp macro BLIS_ENABLE_LEGACY_LAMCH is
defined by the subconfiguration at compile-time. Thanks to Devin
Matthews for providing this patch, and to Stefano Zampini for
reporting the issue (#497) that prompted Devin to propose the patch.
Details:
- Defined getijv, setijv operations to get and set elements of a vector,
in bli_setgetijv.c and .h.
- Renamed bli_setgetij.c and .h to bli_setgetijm.c and .h, respectively.
- Added additional bounds checking to getijm and setijm to prevent
actions with negative indices.
- Added documentation to BLISObjectAPI.md and BLISTypedAPI.md for getijv
and setijv.
- Added documentation to BLISTypedAPI.md for getijm and setijm, which
were inadvertently missing.
- Added a new entry to the FAQ titled "Why does BLIS have vector
(level-1v) and matrix (level-1m) variations of most level-1
operations?"
- Comment updates.
Details:
- Changed bli_pack_get_pack_a() and bli_pack_get_pack_b() so that
instead of returning a bool, they set a bool that is passed in by
address. This does break the public exported API, but I expect very
few users actually use this function. (This change is being made in
preparation for a much more extensive commit relating to error
checking.)
Details:
- Added an err_t* parameter to memory allocation functions including
bli_malloc_intl(), bli_calloc_intl(), bli_malloc_user(),
bli_fmalloc_align(), and bli_fmalloc_noalign(). Since these functions
already use the return value to return the allocated memory address,
they can't communicate errors to the caller through the return value.
This commit does not employ any error checking within these functions
or their callers, but this sets up BLIS for a more comprehensive
commit that moves in that direction.
- Moved the typedefs for malloc_ft and free_ft from bli_malloc.h to
bli_type_defs.h. This was done so that what remains of bli_malloc.h
can be included after the definition of the err_t enum. (This ordering
was needed because bli_malloc.h now contains function prototypes that
use err_t.)
- Defined bli_is_success() and bli_is_failure() static functions in
bli_param_macro_defs.h. These functions provide easy checks for error
codes and will be used more heavily in future commits.
- Unfortunately, the additional err_t* argument discussed above breaks
the API for bli_malloc_user(), which is an exported symbol in the
shared library. However, it's quite possible that the only application
that calls bli_malloc_user()--indeed, the reason it is was marked for
symbol exporting to begin with--is the BLIS testsuite. And if that's
the case, this breakage won't affect anyone. Nonetheless, the "major"
part of the so_version file has been updated accordingly to 4.0.0.
Details:
- Removed the option to finalize BLIS after every BLAS call, which also
means that BLIS would initialize at the beginning of every BLAS call.
This option never really made sense and wasn't even implemented
properly to begin with. (Because bli_init_auto() and _finalize_auto()
were implemented in terms of bli_init_once() and _finalize_once(),
respectively, the application would have only been able to call one
BLAS routine before BLIS would find itself in a unusable, permanently
uninitialized state.) Because this option was never meant for regular
use, it never made it into configure as an actual configure-time
option, and therefore this commit only removes parts of the code
affected by the cpp macro guard BLIS_ENABLE_STAY_AUTO_INITIALIZED.
Details:
- Renamed the files, variables, and functions relating to the packing
block allocator from its legacy name (membrk) to its current name
(pba). This more clearly contrasts the packing block allocator with
the small block allocator (sba).
- Fixed a typo in bli_pack_set_pack_b(), defined in bli_pack.c, that
caused the function to erroneously change the value of the pack_a
field of the global rntm_t instead of the pack_b field. (Apparently
nobody has used this API yet.)
- Comment updates.
Details:
- Switched the small block allocator (sba), as defined in bli_sba.c and
bli_apool.c, to static initialization of its internal mutex. Did a
similar thing for the packing block allocator (pba), which appears as
global_membrk in bli_membrk.c.
- Commented out bli_membrk_init_mutex() and bli_membrk_finalize_mutex()
to ensure they won't be used in the future.
- In bli_thrcomm_pthreads.c and .h, removed old, commented-out cpp
blocks guarded by BLIS_USE_PTHREAD_MUTEX.
Details:
- Relocated the _MSC_VER-guarded cpp macro re-definition of strerror_r
(in terms of strerror_s) from bli_thread.h to bli_env.c. It was
likely left behind in bli_thread.h in a previous commit, when code
that now resides in bli_env.c was moved from bli_thread.c. (I couldn't
find any other instance of strerror_r being used in BLIS, so I moved
the #define directly to bli_env.c rather than place it in bli_env.h.)
The code that uses strerror_r is currently disabled, though, so this
commit should have no affect on BLIS.
Details:
- Reorganized logic of bli_thread_partition_2x2() so that the primary
guts were factored out into "fast" and "slow" variants. Then added
logic to the "fast" variant that allows for more optimal thread
factorizations in some situations where there is at least one factor
of 2.
- Changed BLIS_THREAD_RATIO_M from 2 to 1 in bli_kernel_macro_defs.h and
added comments to that file describing BLIS_THREAD_RATIO_? and
BLIS_THREAD_MAX_?R.
- In bli_family_zen.h and bli_family_zen2.h, preprocessed out several
macros not used in vanilla BLIS and removed the unused macro
BLIS_ENABLE_ZEN_BLOCK_SIZES from the former file.
- Disabled AMD's small matrix handling entry points in bli_syrk_front.c
and bli_trsm_front.c. (These branches of small matrix handling have
not been reviewed by vanilla BLIS developers.)
- Added commented-out calls printf() to bli_rntm.c.
- Whitespace changes to bli_thread.c.
Details:
- When requesting multithreaded parallelism by specifying the total
number of threads (whether it be via environment variable, globally at
runtime, or locally at runtime), reduce the number of threads actually
used by one if the original value (a) is prime and (b) exceeds a
minimum threshold defined by the macro BLIS_NT_MAX_PRIME, which is set
to 11 by default. If, when specifying the total number of threads (and
not the individual ways of parallelism for each loop), prime numbers
of threads are desired, this feature may be overridden by defining the
BLIS_ENABLE_AUTO_PRIME_NUM_THREADS macro in the bli_family_*.h that
corresponds to the configuration family targeted at configure-time.
(For now, there is no configure option(s) to control this feature.)
Thanks to Jeff Diamond for suggesting this change.
- Defined a new function in bli_thread.c, bli_is_prime(), that returns a
bool that determines whether an integer is prime. This function is
implemented in terms of existing functions in bli_thread.c.
- Updated docs/Multithreading.md to document the above feature, along
with unrelated minor edits.
Details:
- Added a configure option, --[enable|disable]-system, which determines
whether the modest operating system dependencies in BLIS are included.
The most notable example of this on Linux and BSD/OSX is the use of
POSIX threads to ensure thread safety for when application-level
threads call BLIS. When --disable-system is given, the bli_pthreads
implementation is dummied out entirely, allowing the calling code
within BLIS to remain unchanged. Why would anyone want to build BLIS
like this? The motivating example was submitted via #454 in which a
user wanted to build BLIS for a simulator such as gem5 where thread
safety may not be a concern (and where the operating system is largely
absent anyway). Thanks to Stepan Nassyr for suggesting this feature.
- Another, more minor side effect of the --disable-system option is that
the implementation of bli_clock() unconditionally returns 0.0 instead
of the time elapsed since some fixed point in the past. The reasoning
for this is that if the operating system is truly minimal, the system
function call upon which bli_clock() would normally be implemented
(e.g. clock_gettime()) may not be available.
- Refactored preprocess-guarded code in bli_pthread.c and bli_pthread.h
to remove redundancies.
- Removed old comments and commented #include of "bli_pthread_wrap.h"
from bli_system.h.
- Documented bli_clock() and bli_clock_min_diff() in BLISObjectAPI.md
and BLISTypedAPI.md, with a note that both are non-functional when
BLIS is configured with --disable-system.
Merged contributions from AMD's AOCL BLIS (#448).
Details:
- Added support for level-3 operation gemmt, which performs a gemm on
only the lower or upper triangle of a square matrix C. For now, only
the conventional/large code path will be supported (in vanilla BLIS).
This was accomplished by leveraging the existing variant logic for
herk. However, some of the infrastructure to support a gemmtsup is
included in this commit, including
- A bli_gemmtsup() front-end, similar to bli_gemmsup().
- A bli_gemmtsup_ref() reference handler function.
- A bli_gemmtsup_int() variant chooser function (with variant calls
commented out).
- Added support for inducing complex domain gemmt via the 1m method.
- Added gemmt APIs to the BLAS and CBLAS compatiblity layers.
- Added gemmt test module to testsuite.
- Added standalone gemmt test driver to 'test' directory.
- Documented gemmt APIs in BLISObjectAPI.md and BLISTypedAPI.md.
- Added a C++ template header (blis.hh) containing a BLAS-inspired
wrapper to a set of polymorphic CBLAS-like function wrappers defined
in another header (cblas.hh). These two headers are installed if
running the 'install' target with INSTALL_HH is set to 'yes'. (Also
added a set of unit tests that exercise blis.hh, although they are
disabled for now because they aren't compatible with out-of-tree
builds.) These files now live in the 'vendor' top-level directory.
- Various updates to 'zen' and 'zen2' subconfigurations, particularly
within the context initialization functions.
- Added s and d copyv, setv, and swapv kernels to kernels/zen/1, and
various minor updates to dotv and scalv kernels. Also added various
sup kernels contributed by AMD to kernels/zen/3. However, these
kernels are (for now) not yet used, in part because they caused
AppVeyor clang failures, and also because I have not found time to
review and vet them.
- Output the python found during configure into the definition of PYTHON
in build/config.mk (via build/config.mk.in).
- Added early-return checks (A, B, or C with zero dimension; alpha = 0)
to bli_gemm_front.c.
- Implemented explicit beta = 0 handling in for the sgemm ukernel in
bli_gemm_armv7a_int_d4x4.c, which was previously missing. This latent
bug surfaced because the gemmt module verifies its computation using
gemm with its beta parameter set to zero, which, on a cortexa15 system
caused the gemm kernel code to unconditionally multiply the
uninitialized C data by beta. The C matrix likely contained
non-numeric values such as NaN, which then would have resulted in a
false failure.
- Fixed a bug whereby the implementation for bli_herk_determine_kc(),
in bli_l3_blocksize.c, was inadvertantly being defined in terms of
helper functions meant for trmm. This bug was probably harmless since
the trmm code should have also done the right thing for herk.
- Used cpp macros to neutralize the various AOCL_DTL_TRACE_ macros in
kernels/zen/3/bli_gemm_small.c since those macros are not used in
vanilla BLIS.
- Added cpp guard to definition of bli_mem_clear() in bli_mem.h to
accommodate C++'s stricter type checking.
- Added cpp guard to test/*.c drivers that facilitate compilation on
Windows systems.
- Various whitespace changes.
Details:
- Implemented support for the user manually overriding the automatic
subconfiguration selection that happens at runtime. This override
can be requested by setting the BLIS_ARCH_TYPE environment variable.
The variable must be set to the arch_t id (as enumerated in
bli_type_defs.h) corresponding to the desired subconfiguration. If a
value outside this enumerated range is given, BLIS will abort with an
error message. If the value is in the valid range but corresponds to a
subconfiguration that was not activated at configure-time/compile-time,
BLIS will abort with a (different) error message. Thanks to decandia50
for suggesting this feature via issue #451.
- Defined a new function bli_gks_lookup_id to return the address of an
internal data structure within the gks. If this address is NULL, then
it indicates that the subconfig corresponding to the arch_t id passed
into the function was not compiled into BLIS. This function is used
in the second of the two abort scenarios described above.
- Defined the enumerated error code BLIS_UNINITIALIZED_GKS_CNTX, which
is returned for the latter of the two abort scenarios mentioned above,
along with a corresponding error message and a function to perform
the error check.
- Added cpp macro branching to bli_env.c to support compilation of the
auto-detect.x executable during configure-time. This cpp branch is
similar to the cpp code already found in bli_arch.c and bli_cpuid.c.
- Cleaned up the auto_detect() function to facilitate easier maintenance
going forward. Also added a convenient debug switch that outputs the
compilation command for the auto-detect.x executable and exits.
Details:
- Textually replaced nearly all non-comment instances of bool_t with the
C99 bool type. A few remaining instances, such as those in the files
bli_herk_x_ker_var2.c, bli_trmm_xx_ker_var2.c, and
bli_trsm_xx_ker_var2.c, were promoted to dim_t since they were being
used not for boolean purposes but to index into an array.
- This commit constitutes the third phase of a transition toward using
C99's bool instead of bool_t, which was raised in issue #420. The first
phase, which cleaned up various typecasts in preparation for using
bool as the basis for bool_t (instead of gint_t), was implemented by
commit a69a4d7. The second phase, which redefined the bool_t typedef
in terms of bool (from gint_t), was implemented by commit 2c554c2.
Details:
- Fixed various typecasts in
frame/base/bli_cntx.h
frame/base/bli_mbool.h
frame/base/bli_rntm.h
frame/include/bli_misc_macro_defs.h
frame/include/bli_obj_macro_defs.h
frame/include/bli_param_macro_defs.h
that were missing or being done improperly/incompletely. For example,
many return values were being typecast as
(bool_t)x && y
rather than
(bool_t)(x && y)
Thankfully, none of these deficiencies had manifested as actual bugs
at the time of this commit.
- Changed the return type of bli_env_get_var() from dim_t to gint_t.
This reflects the fact that bli_env_get_var() needs to be able to
return a signed integer, and even though dim_t is currently defined
as a signed integer, it does not intuitively appear to necessarily be
signed by inspection (i.e., an integer named "dim_t" for matrix
"dimension"). Also, updated use of bli_env_get_var() within
bli_pack.c to reflect the changed return type.
- Redefined type of thrcomm_t.barrier_sense field from bool_t to gint_t
and added comments to the bli_thrcomm_*.h files that will explain a
planned replacement of bool_t with C99's bool type.
- Note: These changes are being made to facilitate the substitution of
'bool' for 'bool_t', which will eliminate the namespace conflict with
arm_sve.h as reported in issue #420. This commit implements the first
phase of that transition. Thanks to RuQing Xu for reporting this
issue.
- CREDITS file update.
Details:
- Updated all static function definitions to use the cpp macro
BLIS_INLINE instead of the static keyword. This allows blis.h to
use a different keyword (inline) to define these functions when
compiling with C++, which might otherwise trigger "defined but
not used" warning messages. Thanks to Giorgos Margaritis for
reporting this issue and Devin Matthews for suggesting the fix.
- Updated the following files, which are used by configure's
hardware auto-detection facility, to unconditionally #define
BLIS_INLINE to the static keyword (since we know BLIS will be
compiled with C, not C++):
build/detect/config/config_detect.c
frame/base/bli_arch.c
frame/base/bli_cpuid.c
- CREDITS file update.
Details:
- Relocated the #include "cpuid.h" directive from bli_cpuid.h to
bli_cpuid.c. This was done because cpuid.h (which is pulled into
the post-build blis.h developer header) doesn't protect its
definitions with a preprocessor guard of the form:
#ifndef FOOBAR_H
#define FOOBAR_H
// header contents.
#endif
and as a result, applications (previously) could not #include both
blis.h and cpuid.h (since the former was already including the
latter). Thanks to Bhaskar Nallani for raising this issue via #393
and to Devin Matthews for suggesting this fix.
- CREDITS file update.
Details:
- Changed the behavior of bli_rntm_init() as well as the static
initializer, BLIS_RNTM_INITIALIZER, so that user-initialized rntm_t
objects by default specify the disabling of packing for A and B.
Packing of A/B was already disabled by default when calling non-expert
APIs (and enabled only when the user set environment variables
BLIS_PACK_A or BLIS_PACK_B). With this commit, the default behavior of
using user-initialized rntm_t objects with expert APIs comes into line
with the default behavior of non-expert APIs--that is, they now both
lead to the avoidance of packing in the sup code path. (Note: The
conventional code path is unaffected by the environment variables
BLIS_PACK_A/BLIS_PACK_B and/or the disabling of packing in a rntm_t
object when calling an expert API.) This addresses issue #392. Thanks
to Kiran Varaganti for bringing this inconsistency to our attention.
- The above change was accomplished by changing the the definitions of
static functions bli_rntm_clear_pack_a() and bli_rntm_clear_pack_b()
in bli_rntm.h, which are both for internal use only.
Details:
- Added multithreading support to the sup framework (via either OpenMP
or pthreads). Both variants 1n and 2m now have the appropriate
threading infrastructure, including data partitioning logic, to
parallelize computation. This support handles all four combinations
of packing on matrices A and B (neither, A only, B only, or both).
This implementation tries to be a little smarter when automatic
threading is requested (e.g. via BLIS_NUM_THREADS) in that it will
recalculate the factorization in units of micropanels (rather than
using the raw dimensions) in bli_l3_sup_int.c, when the final
problem shape is known and after threads have already been spawned.
- Implemented bli_?packm_sup_var2(), which packs to conventional row-
or column-stored matrices. (This is used for the rrc and crc storage
cases.) Previously, copym was used, but that would no longer suffice
because it could not be parallelized.
- Minor reorganization of packing-related sup functions. Specifically,
bli_packm_sup_init_mem_[ab]() are called from within packm_sup_[ab]()
instead of from the variant functions. This has the effect of making
the variant functions more readable.
- Added additional bli_thrinfo_set_*() static functions to bli_thrinfo.h
and inserted usage of these functions within bli_thrinfo_init(), which
previously was accessing thrinfo_t fields via the -> operator.
- Renamed bli_partition_2x2() to bli_thread_partition_2x2().
- Added an auto_factor field to the rntm_t struct in order to track
whether automatic thread factorization was originally requested.
- Added new test drivers in test/supmt that perform multithreaded sup
tests, as well as appropriate octave/matlab scripts to plot the
resulting output files.
- Added additional language to docs/Multithreading.md to make it clear
that specifying any BLIS_*_NT variable, even if it is set to 1, will
be considered manual specification for the purposes of determining
whether to auto-factorize via BLIS_NUM_THREADS.
- Minor comment updates.
Details:
- Fixed an error that manifests only when using C++ (specifically,
modern versions of g++) to compile drivers in 'test' (and likely most
other application code that #includes blis.h. Thanks to Ajay Panyala
for reporting this issue (#374).
* Fix parsing in vpu_count on workstation SKX
* Document Skylake-X as Haswell for single FMA
* Update vpu_count for Skylake and Cascade Lake models
* Support printing the configuration selected, controlled by the environment
Intended particularly for diagnosing mis-selection of SKX through
unknown, or incorrect, number of VPUs.
* Move bli_log outside the cpp condition, and use it where intended
* Add Fixme comment (Skylake D)
* Mostly superficial edits to commits towards #351.
Details:
- Moved architecture/sub-config logging-related code from bli_cpuid.c
to bli_arch.c, tweaked names, and added more set/get layering.
- Tweaked log messages output from bli_cpuid_is_skx() in bli_cpuid.c.
- Content, whitespace changes to new bullet in HardwareSupport.md that
relates to single-VPU Skylake-Xs.
* Fix comment typos
Co-authored-by: Field G. Van Zee <field@cs.utexas.edu>
Details:
- Implemented optional packing for A or B (or both) within the sup
framework (which currently only supports gemm). The request for
packing either matrix A or matrix B can be made via setting
environment variables BLIS_PACK_A or BLIS_PACK_B (to any
non-zero value; if set, zero means "disable packing"). It can also
be made globally at runtime via bli_pack_set_pack_a() and
bli_pack_set_pack_b() or with individual rntm_t objects via
bli_rntm_set_pack_a() and bli_rntm_set_pack_b() if using the expert
interface of either the BLIS typed or object APIs. (If using the
BLAS API, environment variables are the only way to communicate the
packing request.)
- One caveat (for now) with the current implementation of selective
packing is that any blocksize extension registered in the _cntx_init
function (such as is currently used by haswell and zen subconfigs)
will be ignored if the affected matrix is packed. The reason is
simply that I didn't get around to implementing the necessary logic
to pack a larger edge-case micropanel, though this is entirely
possible and should be done in the future.
- Spun off the variant-choosing portion of bli_gemmsup_ref() into
bli_gemmsup_int(), in bli_l3_sup_int.c.
- Added new files, bli_l3_sup_packm_a.c, bli_l3_sup_packm_b.c, along
with corresponding headers, in which higher-level packm-related
functions are defined for use within the sup framework. The actual
packm variant code resides in bli_l3_sup_packm_var.c.
- Pass the following new parameters into var1n and var2m: packa, packb
bool_t's, pointer to a rntm_t, pointer to a cntl_t (which is for now
always NULL), and pointer to a thrinfo_t* (which for nowis the address
of the global single-threaded packm thread control node).
- Added panel strides ps_a and ps_b to the auxinfo_t structure so that
the millikernel can query the panel stride of the packed matrix and
step through it accordingly. If the matrix isn't packed, the panel
stride of interest for the given millikernel will be set to the
appropriate value so that the mkernel may step through the unpacked
matrix as it normally would.
- Modified the rv_6x8m and rv_6x8n millikernels to read the appropriate
panel strides (ps_a and ps_b, respectively) instead of computing them
on the fly.
- Spun off the environment variable getting and setting functions into
a new file, bli_env.c (with a corresponding prototype header). These
functions are now used by the threading infrastructure (e.g.
BLIS_NUM_THREADS, BLIS_JC_NT, etc.) as well as the selective packing
infrastructure (e.g. BLIS_PACK_A, BLIS_PACK_B).
- Added a static initializer for mem_t objects, BLIS_MEM_INITIALIZER.
- Added a static initializer for pblk_t objects, BLIS_PBLK_INITIALIZER,
for use within the definition of BLIS_MEM_INITIALIZER.
- Moved the global_rntm object to bli_rntm.c and extern it where needed.
This means that the function bli_thread_init_rntm() was renamed to
bli_rntm_init_from_global() and relocated accordingly.
- Added a new bli_pack.c function, which serves as the home for
functions that manage the pack_a and pack_b fields of the global
rntm_t, including from environment variables, just as we have
functions to manage the threading fields of the global rntm_t in
bli_thread.c.
- Reorganized naming for files in frame/thread, which mostly involved
spinning off the bli_l3_thread_decorator() functions into their own
files. This change makes more sense when considering the further
addition of bli_l3_sup_thread_decorator() functions (for now limited
only to the single-threaded form found in the _single.c file).
- Explicitly initialize the reference sup handlers in both
bli_cntx_init_haswell.c and bli_cntx_init_zen.c so that it's more
obvious how to customize to a different handler, if desired.
- Removed various snippets of disabled code.
- Various comment updates.
Details:
- Fixed a bug in bli_acquire_mpart_mdim(), bli_acquire_mpart_ndim(),
and bli_acquire_mpart_mndim() that allowed the use of a blocksize b
that is too large given the current row/column index (i.e., the i/j
argument) and the size of the dimension being partitioned (i.e., the
m/n argument). This bug only affected backwards partitioning/motion
through the dimension and was the result of a misplaced conditional
check-and-redirect to the backwards code path. It should be noted
that this bug was discovered not because it manifested the way it
could (thanks to the callers in BLIS making sure to always pass in
the "correct" blocksize b), but could have manifested if the
functions were used by 3rd party callers. Thanks to Minh Quan Ho for
reporting the bug via issue #363.
Details:
- Added missing license header to bli_pwr9_asm_macros_12x6.h.
- Reverted temporary changes to various files in 'test' and 'testsuite'
directories.
- Moved testsuite/jobscripts into testsuite/old.
- Minor whitespace/comment changes across various files.
Implemented and registered power9 dgemm ukernel.
Details:
- Implemented 12x6 dgemm microkernel for power9. This microkernel
assumes that elements of B have been duplicated/broadcast during the
packing step. The microkernel uses a column orientation for its
microtile vector registers and thus implements column storage and
general stride IO cases. (A row storage IO case via in-register
transposition may be added at a future date.) It should be noted that
we recommend using this microkernel with gcc and *not* xlc, as issues
with the latter cropped up during development, including but not
limited to slightly incompatible vector register mnemonics in the GNU
extended inline assembly clobber list.
Details:
- NOTE: This is a merge commit of 'master' of git://github.com/amd/blis
into 'amd-master' of flame/blis.
- Fixed a bug in the downstream value of BLIS_NUM_ARCHS, which was
inadvertantly not incremented when the Zen2 subconfiguration was
added.
- In bli_gemm_front(), added a missing conditional constraint around the
call to bli_gemm_small() that ensures that the computation precision
of C matches the storage precision of C.
- In bli_syrk_front(), reorganized and relocated the notrans/trans logic
that existed around the call to bli_syrk_small() into bli_syrk_small()
to minimize the calling code footprint and also to bring that code
into stylistic harmony with similar code in bli_gemm_front() and
bli_trsm_front(). Also, replaced direct accessing of obj_t fields with
proper accessor static functions (e.g. 'a->dim[0]' becomes
'bli_obj_length( a )').
- Added #ifdef BLIS_ENABLE_SMALL_MATRIX guard around prototypes for
bli_gemm_small(), bli_syrk_small(), and bli_trsm_small(). This is
strictly speaking unnecessary, but it serves as a useful visual cue to
those who may be reading the files.
- Removed cpp macro-protected small matrix debugging code from
bli_trsm_front.c.
- Added a GCC_OT_9_1_0 variable to build/config.mk.in to facilitate gcc
version check for availability of -march=znver2, and added appropriate
support to configure script.
- Cleanups to compiler flags common to recent AMD microarchitectures in
config/zen/amd_config.mk, including: removal of -march=znver1 et al.
from CKVECFLAGS (since the -march flag is added within make_defs.mk);
setting CRVECFLAGS similarly to CKVECFLAGS.
- Cleanups to config/zen/bli_cntx_init_zen.c.
- Cleanups, added comments to config/zen/make_defs.mk.
- Cleanups to config/zen2/make_defs.mk, including making use of newly-
added GCC_OT_9_1_0 and existing GCC_OT_6_1_0 to choose the correct
set of compiler flags based on the version of gcc being used.
- Reverted downstream changes to test/test_gemm.c.
- Various whitespace/comment changes.
Details:
- Added support for being able to duplicate (broadcast) elements in
memory when packing matrix B (ie: the left-hand operand) in level-3
operations. This turns out advantageous for some architectures that
can afford the cost of the extra bandwidth and somehow benefit from
the pre-broadcast elements (and thus being able to avoid using
broadcast-style load instructions on micro-rows of B in the gemm
microkernel).
- Support optionally disabling right-side hemm and symm. If this occurs,
hemm_r is implemented in terms of hemm_l (and symm_r in terms of
symm_l). This is needed when broadcasting during packing because the
alternative--supporting the broadcast of B while also allowing matrix
B to be Hermitian/symmetric--would be an absolute mess.
- Support alignment factors for packed blocks of A, B, and C separately
(as well as for general-purpose buffers). In addition, we support
byte offsets from those alignment values (which is different from
aligning by align+offset bytes to begin with). The default alignment
values are BLIS_PAGE_SIZE in all four cases, with the offset values
defaulting to zero.
- Pass pack_t schema into bli_?packm_cxk() so that it can be then passed
into the packm kernel, where it will be needed by packm kernels that
perform broadcasts of B, since the idea is that we *only* want to
broadcast when packing micropanels of B and not A.
- Added definition for variadic bli_cntx_set_l3_vir_ukrs(), which can be
used to set custom virtual level-3 microkernels in the cntx_t, which
would typically be done in the bli_cntx_init_*() function defined in
the subconfiguration of interest.
- Added a "broadcast B" kernel function for use with NP/NR = 12/6,
defined in in ref_kernels/1m/bli_packm_cxk_bb_ref.c.
- Added a gemm, gemmtrsm, and trsm "broadcast B" reference kernels
defined in ref_kernels/3/bb. (These kernels have been tested with
double real with NP/NR = 12/6.)
- Added #ifndef ... #endif guards around several macro constants defined
in frame/include/bli_kernel_macro_defs.h.
- Defined a few "broadcast B" static functions in
frame/include/level0/bb for use by "broadcast B"-style packm reference
kernels. For now, only the real domain kernels are tested and fully
defined.
- Output the alignment and offset values for packed blocks of A and B
in the testsuite's "BLIS configuration info" section.
- Comment updates to various files.
- Bumped so_version to 3.0.0.
Details:
- Rewrote bli_cpuid_query() for ARM architectures to use stdio-based
functions such as fopen() and fgets() instead of popen(). The new code
does more or less the same thing as before--searches /proc/cpuinfo for
various strings, which are then parsed in order to determine the
model, part number, and features. Thanks to Dave Love for suggesting
this change in issue #335.
Details:
- Defined two new static functions in bli_cntx.h:
bli_cntx_set_blksz_def_dt()
bli_cntx_set_blksz_max_dt()
which developers may find convenient when experimenting with different
values of cache blocksizes.
- Updated one- and two-socket multithreaded problem size range and
increment values in test/3/Makefile.
- Changed default to column storage in test/3/test_gemm.c.
- Fixed typo in comment in testsuite/src/test_subm.c.
