config/zen/bli_family_zen.h: deleted macro BLIS_ENBLE_ZEN_BLOCK_SIZES
config/zen/make_defs.mk: removed compiler flag -mno-avx256-split-unaligned-store
frame/base/bli_cpuid.c: ROME family is 17H but model # is from 0x30H.
test/test_gemm.c - commented out #define FILE_IN_OUT (some compilation error when BLIS is configured as amd64)
Now we can use single configuration has ./configure amd64 - this will work both for ROME & Naples
Change-Id: I91b4fc35380f8a35b4f4c345da040c6b5910b4a2
A Macro 'FILE_IN_OUT" is defined to read input parameters from a csv file.
Format for input file:
Each line defines a gemm problem with following parameters: m k n cs_a cs_b cs_c
The operation always implemented is C = C - A*B and column-major format.
When macro is disabled - it reverts back to original implementation.
Usage: ./test_gemm_<mkl/blis/openblas>.x input.csv output.csv
GEMM is called through BLAS interface
For BLIS - the test application also prints either 'S' indicating small gemm routine or 'N' - conventional BLIS gemm
for MKL/OpenBLAS - ignore this character
Change-Id: I0924ef2c1f7bdea48d4cdb230b888e2af2c86a36
Details:
- Added a variant set of matlab scripts geared to producing plots that
reflect performance data gathered with and without extra memory
optimizations enabled. These scripts reside (for now) in
test/mixeddt/matlab/wawoxmem.
Details:
- Parameterized, reorganized, and added comments to matlab scripts in
test/mixeddt/matlab.
- Reordered some lines of code and added comments to plot_l3_perf.m in
test/3m4m/matlab.
Details:
- Updated 3m4m and mixeddt Makefiles and runme.sh scripts, mostly to
port recent changes to the former to the latter.
- Disabled (for now) code in 3m4m/test_*.c files that disables all
induced methods except for the one that is requested from the
Makefile via the IND macro. This is done because usually, we want to
test whatever method is enabled automatically for complex datatypes.
(That is, when native complex microkernels are missing, we usually
want to test performance of 1m.)
Details:
- Removed explicit reference to The University of Texas at Austin in the
third clause of the license comment blocks of all relevant files and
replaced it with a more all-encompassing "copyright holder(s)".
- Removed duplicate words ("derived") from a few kernels' license
comment blocks.
- Homogenized license comment block in kernels/zen/3/bli_gemm_small.c
with format of all other comment blocks.
Details:
- Added a new directory, test/3m4m/matlab, containing matlab scripts for
plotting 4x5 panels of performance graphs (using the subplot()
function) for gemm, hemm, herk, trmm, and trsm across all four
floating-point datatypes. I expect to further refine these scripts as
time goes on, but their current state constitutes a good start.
Details:
- Cleanups to Makefile to allow all test drivers to be built for
OpenBLAS and MKL in addition to BLIS.
- Fixed copy-paste typos in test_hemm in calls to ssymm_() and dsymm_().
- Fixed incorrect types for betap in BLAS cpp macro branch of
test_herk.c.
Details:
- Added a new test_hemm.c test driver to test/3m4m, which was modeled
after the driver by the similar name in test. Also updated Makefile
so that blis-nat-[sm]t would trigger builds for the new driver.
Details:
- Renamed scripts in test/mixeddt/matlab:
plot_case_all.m -> plot_dom_all.m
plot_case_md.m -> plot_dom_case.m
plot_all_md.m -> plot_dt_all.m
- Added plot_dt_select.m in order to plot select graphs for the main
body of the mixeddt paper, and added additional related legend
handling in plot_gemm_perf.m.
- Added test/mixeddt/matlab/output and a .gitkeep file within in order
to force git to recognize the directory.
Details:
- Cleaned up test/mixeddt Makefile in preparation for gathering new
data for mixeddt paper, including renaming implementations to
"internal" and "ad-hoc" to match the terminology to be used in the
paper.
- Added new matlab scripts for generating 8 figures, each covering all
mixed-precision cases for each mixed-domain case.
- Updated the runme.sh script according to changes to Makefile.
- Fixed a minor bug in test_gemm.c that may have given incorrect
performance in complex, homogeneous storage datatype cases where
the computation precision was equal to the storage precisions.
(Examples: zzzd, cccs.)
Details:
- Expanded the bli_pthread_*() -> pthread_*() wrappers in
frame/thread/bli_pthread.c to include cases for Windows taken from
frame/base/bli_pthread_wrap.c. Now, bli_thread_*() is always defined
and always used by BLIS and the BLIS testsuite (in lieu of calling
pthreads directly, as before). The implementation used in this new
API depends on whether we are building for Windows, and to a lesser
extent, whether we are building on OS X. For the core API, Windows
uses Windows threads, non-Windows (Linux, OS X) uses pthreads.
OS X and Windows get barriers implemented in terms of other
bli_pthread_*() functions, and Linux gets barriers implemented in
terms of pthread_barrier*(). This commit addresses issue #273.
- Fixed a bug in the Linux definition of bli_pthread_mutex_unlock(),
which was erroneously calling pthread_mutex_lock().
- Minor changes to configure so that the auto-detection executable
can be built given the above changes (most notably, turning on
POSIX extensions via -D_GNU_SOURCE).
- Removed temporary play-test code for shiftd that accidentally got
committed into test/3m4m/test_gemm.c.
Details:
- Defined a new level-1d operation called 'shiftd', including object and
typed APIs. This operation adds a scalar value to every element along
an arbitrary diagonal of a matrix. Currently, shiftd is implemented in
terms of the addv kernel. (The scalar is passed in as the x vector
with an increment of zero.)
- Replaced ad-hoc usage of setd and addd (after creating a temporary
matrix object) with use of shiftd, which is much more concise, in
various test driver files in the testsuite. Similar changes were made
to the standalone test drivers and the example code.
- Added documentation entries in BLISObjectAPI.md and BLISTypedAPI.md
for bli_shiftd() and bli_?shiftd(), respectively.
- Added observed object properties to level-1d documentation in
BLISObjectAPI.md.
Details:
- Implemented support for gemm where A, B, and C may have different
storage datatypes, as well as a computational precision (and implied
computation domain) that may be different from the storage precision
of either A or B. This results in 128 different combinations, all
which are implemented within this commit. (For now, the mixed-datatype
functionality is only supported via the object API.) If desired, the
mixed-datatype support may be disabled at configure-time.
- Added a memory-intensive optimization to certain mixed-datatype cases
that requires a single m-by-n matrix be allocated (temporarily) per
call to gemm. This optimization aims to avoid the overhead involved in
repeatedly updating C with general stride, or updating C after a
typecast from the computation precision. This memory optimization may
be disabled at configure-time (provided that the mixed-datatype
support is enabled in the first place).
- Added support for testing mixed-datatype combinations to testsuite.
The user may test gemm with mixed domains, precisions, both, or
neither.
- Added a standalone test driver directory for building and running
mixed-datatype performance experiments.
- Defined a new variation of castm, castnzm, which operates like castm
except that imaginary values are not touched when casting a real
operand to a complex operand. (By contrast, in these situations castm
sets the imaginary components of the destination matrix to zero.)
- Defined bli_obj_imag_is_zero() and substituted calls in lieu of all
usages of bli_obj_imag_equals() that tested against BLIS_ZERO, and
also simplified the implementation of bli_obj_imag_equals().
- Fixed bad behavior from bli_obj_is_real() and bli_obj_is_complex()
when given BLIS_CONSTANT objects.
- Disabled dt_on_output field in auxinfo_t structure as well as all
accessor functions. Also commented out all usage of accessor
functions within macrokernels. (Typecasting in the microkernel is
still feasible, though probably unrealistic for now given the
additional complexity required.)
- Use void function pointer type (instead of void*) for storing function
pointers in bli_l0_fpa.c.
- Added documentation for using gemm with mixed datatypes in
docs/MixedDatatypes.md and example code in examples/oapi/11gemm_md.c.
- Defined level-1d operation xpbyd and level-1m operation xpbym.
- Added xpbym test module to testsuite.
- Updated frame/include/bli_x86_asm_macros.h with additional macros
(courtsey of Devin Matthews).
Details:
- Adjusted the method by which micropanels are assigned to threads in
the 2nd (jr) and 1st (ir) loops around the microkernel to (mostly)
employ contiguous "slab" partitioning rather than interleaved (round
robin) partitioning. The new partitioning schemes and related details
for specific families of operations are listed below:
- gemm: slab partitioning.
- herk: slab partitioning for region corresponding to non-triangular
region of C; round robin partitioning for triangular region.
- trmm: slab partitioning for region corresponding to non-triangular
region of B; round robin partitioning for triangular region.
(NOTE: This affects both left- and right-side macrokernels:
trmm_ll, trmm_lu, trmm_rl, trmm_ru.)
- trsm: slab partitioning.
(NOTE: This only affects only left-side macrokernels trsm_ll,
trsm_lu; right-side macrokernels were not touched.)
Also note that the previous macrokernels were preserved inside of
the 'other' directory of each operation family directory (e.g.
frame/3/gemm/other, frame/3/herk/other, etc).
- Updated gemm macrokernel in sandbox/ref99 in light of above changes
and fixed a stale function pointer type in blx_gemm_int.c
(gemm_voft -> gemm_var_oft).
- Added standalone test drivers in test/3m4m for herk, trmm, and trsm
and minor changes to test/3m4m/Makefile.
- Updated the arguments and definitions of bli_*_get_next_[ab]_upanel()
and bli_trmm_?_?r_my_iter() macros defined in bli_l3_thrinfo.h.
- Renamed bli_thread_get_range*() APIs to bli_thread_range*().
Details:
- Tweaked the cflags functions in common.mk so that a new preprocessor
macro, BLIS_IS_BUILDING_LIBRARY, is defined, but only when BLIS
itself is being built. This macro will not be defined when, for
example, the testsuite or example code compiles code local to those
applications. This was done in part by defining a new cflags function
get-user-cflags-for(), which is now the designated function for
application Makefiles if they wish to inherit a basic set of CFLAGS
from BLIS. (The compiler flags returned are identical to that of
get-frame-cflags-for() except that -DBLIS_IS_BUILDING_LIBRARY is
omitted.)
- Updated all test driver-like makefiles to call get-user-cflags-for()
instead of get-frame-cflags-for().
Details:
- Removed four trailing spaces after "BLIS" that occurs in most files'
commented-out license headers.
- Added UT copyright lines to some files. (These files previously had
only AMD copyright lines but were contributed to by both UT and AMD.)
- In some files' copyright lines, expanded 'The University of Texas' to
'The University of Texas at Austin'.
- Fixed various typos/misspellings in some license headers.
Details:
- Updated the build system so that "lesser" Makefiles, such as those in
belonging to example code or the testsuite, may be run even if the
directory is orphaned from the original build tree. This allows a
user to configure, compile, and install BLIS, delete the build tree
(that is, the source distribution, or the build directory for out-
of-tree builds) and then compile example or testsuite code and link
against the installed copy of BLIS (provided the example or testsuite
directory was preserved or obtained from another source). The only
requirement is that make be invoked while setting the
BLIS_INSTALL_PATH variable to the same installation prefix used when
BLIS was configured. The easiest syntax is:
make BLIS_INSTALL_PATH=/install/prefix
though it's also permissible to set BLIS_INSTALL_PATH as an
environment variable prior to running 'make'.
- Updated all lesser Makefiles to implement the new aforementioned build
behavior.
- Relocated check-blastest.sh and check-blistest.sh from build to
blastest and testsuite, respectively, so that if those directories are
copied elsewhere the user can still run 'make check' locally.
- Updated docs/Testsuite.md with language that mentions this new option
of building/linking against an installed copy of BLIS.
Details:
- Removed the dtime (delta time, or wallclock time) column from the
matlab output of all test drivers in test, test/3m4m, test/studies.
This value was rarely (if ever) really needed and usually only served
to take up screen space.
- Updated format specifier in test/studies/skx to use %7.2f instead of
%6.3f.
- For the test drivers in 'test' directory, added an initial line of
output that sets last entry of matlab matrix to zero in order to
induce a pre-allocation of the entire array of performance results.
Details:
- Changed the format specifier for the gflops column in the testsuite
output from %7.3f to %7.2f. This was done mainly to keep the output
aligned properly when the expected perfomance exceeded 1000 gflops.
Also, two decimal places still conveys plenty of precision for all
practical applications, including just eyeballing performance deltas
between two executions (let alone two implementations).
- Changed the format specifier for gflops in the test/3m4m drivers
from %6.3f to %7.2f (for the same reasons listed above).
Details:
- Created a 'studies' subdirectory within 'test' to be used to house
test drivers, makefiles, run scripts, matlab plot code, and related
files that have been customized for collecting performance data on
specific host machines or product lines. This new setup will help us
catalog, track, and share test driver materials over time, and in a
way that facilitates reproducibility.
- Created an 'skx' subdirectory within 'test/studies' to house various
level-3 test driver files used to measure performance on SkylakeX
nodes (specifically, those nodes used by TACC's stampede2 system).
Details:
- Minor edits to sandbox/ref99/README.md.
- Removed cpp guards in sandbox/ref99/thread/blx_gemm_thread.h to be
consistent with other headers in sandbox/ref99.
- Additional targets and related cleanups in test/3m4m/Makefile.
Details:
- Converted most C preprocessor macros in bli_param_macro_defs.h and
bli_obj_macro_defs.h to static functions.
- Reshuffled some functions/macros to bli_misc_macro_defs.h and also
between bli_param_macro_defs.h and bli_obj_macro_defs.h.
- Changed obj_t-initializing macros in bli_type_defs.h to static
functions.
- Removed some old references to BLIS_TWO and BLIS_MINUS_TWO from
bli_constants.h.
- Whitespace changes in select files (four spaces to single tab).
Details:
- Imported the 24x16 knl sgemm microkernel (and its corresonding spackm
kernel) from TBLIS and enabled its use in the knl sub-config. Also
Added sgemm microkernel prototype to bli_kernels_knl.h.
- Updated dgemm and dpackm microkernels from TBLIS, which included an
important change regarding the offsets array (changed from extern
declaration to static declaration/definition).
- Activated use of level-1v and -1f zen kernels in skx and knl
sub-configs.
- Removed some old macros no longer needed in bli_family_skx.h now that
libmemkind support exists in configure.
- Moved bli_avx512_macros.h to frame/include and adjusted #includes in
skx and knl kernels accordingly.
- Moved unused kernels in kernels/knl/3 to kernels/knl/3/other
directory.
- Fixed a minor bug in the 'make' output per compile when verboseness
is not turned on. The rule-generating function 'make-kernel-rule' was
previously passing in the name of the config, rather than the name of
the kernel set returned by get-config-for-kset, which could give
misleading information to the user when the kconfig_map mapped a
kernel set to a sub-configuration that did not share the same name.
(This didn't affect the CFLAGS that were actually used.)
- Updated test/3m4m/Makefile, removing acml targets and renaming the
remaining targets.
