Details:
-This commit addresses the performance optimization(single-thread and
multi-thread) for DTRSM on zen2.
-This new optimization employs different MC, KC & NC values for TRSM than
what is being used in other Level-3 routines like DGEMM.
-Changed TRSM framework code to choose these blocksizes for TRSM
on zen family configurations.
-Added a new field called "trsm_blkszs" to cntx structure in order to
store TRSM specific block sizes.
-Implemented routines to initialize, set and query the TRSM-specific
block sizes.
-Defined a new macro "AOCL_BLIS_ZEN" in configure script.
This macro is automatically defined for zen family architectures.
It enables us to choose different cache block sizes for TRSM instead of common level-3 block sizes.
Change-Id: Id8557b1c962a316b1edecca9cd582675eaf35fe6
Signed-off-by: Meghana Vankadari <meghana.vankadari@amd.com>
AMD-Internal: [CPUPL-656]
Even though configure script check the availability of correct version
of python, this information is not passed to makefiles. This results
in python scripts getting involved without interpreter. This normally
works fine as the script used the path for shebang, however it doesn't
work if the command specified by shebang is alias.
This also causes confusion that even though configure has found the
python, we end up with python not found error during build.
This fix will pass the detected version of the python interpreter to
makefiles which solved both issues mentioned above.
Change-Id: Ic04da77601ff8ad2a461e9f2f936470109cda22c
Details:
- Added missing license header to bli_pwr9_asm_macros_12x6.h.
- Reverted temporary changes to various files in 'test' and 'testsuite'
directories.
- Moved testsuite/jobscripts into testsuite/old.
- Minor whitespace/comment changes across various files.
Details:
- Fixed and adjusted the logic in configure so that a more informative
error message is output when a user runs './configure ... <conf>' and
<conf> is present in the configuration blacklist. Previously, this
particular set of conditions would result in the message:
'user-specified configuration '' is NOT registered!
That is, the error message mis-identified the targeted configuration
as the empty string, and (more importantly) mis-identifies the
problem. Thanks to Tze Meng Low for reporting this issue.
- Fixed a nearby error messages somewhat unrelated to the issue above.
Specifically, the wrong string was being printed when the error
message was identifying an auto-detected configuration that did not
appear to be registered.
Details:
- NOTE: This is a merge commit of 'master' of git://github.com/amd/blis
into 'amd-master' of flame/blis.
- Fixed a bug in the downstream value of BLIS_NUM_ARCHS, which was
inadvertantly not incremented when the Zen2 subconfiguration was
added.
- In bli_gemm_front(), added a missing conditional constraint around the
call to bli_gemm_small() that ensures that the computation precision
of C matches the storage precision of C.
- In bli_syrk_front(), reorganized and relocated the notrans/trans logic
that existed around the call to bli_syrk_small() into bli_syrk_small()
to minimize the calling code footprint and also to bring that code
into stylistic harmony with similar code in bli_gemm_front() and
bli_trsm_front(). Also, replaced direct accessing of obj_t fields with
proper accessor static functions (e.g. 'a->dim[0]' becomes
'bli_obj_length( a )').
- Added #ifdef BLIS_ENABLE_SMALL_MATRIX guard around prototypes for
bli_gemm_small(), bli_syrk_small(), and bli_trsm_small(). This is
strictly speaking unnecessary, but it serves as a useful visual cue to
those who may be reading the files.
- Removed cpp macro-protected small matrix debugging code from
bli_trsm_front.c.
- Added a GCC_OT_9_1_0 variable to build/config.mk.in to facilitate gcc
version check for availability of -march=znver2, and added appropriate
support to configure script.
- Cleanups to compiler flags common to recent AMD microarchitectures in
config/zen/amd_config.mk, including: removal of -march=znver1 et al.
from CKVECFLAGS (since the -march flag is added within make_defs.mk);
setting CRVECFLAGS similarly to CKVECFLAGS.
- Cleanups to config/zen/bli_cntx_init_zen.c.
- Cleanups, added comments to config/zen/make_defs.mk.
- Cleanups to config/zen2/make_defs.mk, including making use of newly-
added GCC_OT_9_1_0 and existing GCC_OT_6_1_0 to choose the correct
set of compiler flags based on the version of gcc being used.
- Reverted downstream changes to test/test_gemm.c.
- Various whitespace/comment changes.
Details:
- Attempted a fix to issue #313, which reports that when building only
a shared library (ie: static library build is disabled), running the
BLAS test drivers can fail because those drivers provide their own
local version of xerbla_() as a clever (albeit still rather hackish)
way of checking the error codes that result from the individual tests.
This local xerbla_() function is never found at link-time because the
BLAS test drivers' Makefile imports BLIS compilation flags via the
get-user-cflags-for() function, which currently conveys the
-fvisibility=hidden flag, which hides symbols unless they are
explicitly annotated for export. The -fvisibility=hidden flag was
only ever intended for use when building BLIS (not for applications),
and so the attempted solution here is to omit the symbol export
flag(s) from get-user-cflags-for() by storing the symbol export
flag(s) to a new BULID_SYMFLAGS variable instead of appending it
to the subconfigurations' CMISCFLAGS variable (which is returned by
every get-*-cflags-for() function). Thanks to M. Zhou for reporting
this issue and also to Isuru Fernando for suggesting the fix.
- Renamed BUILD_FLAGS to BUILD_CPPFLAGS to harmonize with the newly
created BUILD_SYMFLAGS.
- Fixed typo in entry for --export-shared flag in 'configure --help'
text.
Details:
- Commented out redundant setting of LIBBLIS_LINK within all driver-
level Makefiles. This variable is already set within common.mk, and
so the only time it should be overridden is if the user wants to link
to a different copy of libblis.
- Very minor changes to build/gen-make-frags/gen-make-frag.sh.
- Whitespace and inconsequential quoting change to configure.
- Moved top-level 'windows' directory into a new 'attic' directory.
Details:
- Implemented a new sub-framework within BLIS to support the management
of code and kernels that specifically target matrix problems for which
at least one dimension is deemed to be small, which can result in long
and skinny matrix operands that are ill-suited for the conventional
level-3 implementations in BLIS. The new framework tackles the problem
in two ways. First the stripped-down algorithmic loops forgo the
packing that is famously performed in the classic code path. That is,
the computation is performed by a new family of kernels tailored
specifically for operating on the source matrices as-is (unpacked).
Second, these new kernels will typically (and in the case of haswell
and zen, do in fact) include separate assembly sub-kernels for
handling of edge cases, which helps smooth performance when performing
problems whose m and n dimension are not naturally multiples of the
register blocksizes. In a reference to the sub-framework's purpose of
supporting skinny/unpacked level-3 operations, the "sup" operation
suffix (e.g. gemmsup) is typically used to denote a separate namespace
for related code and kernels. NOTE: Since the sup framework does not
perform any packing, it targets row- and column-stored matrices A, B,
and C. For now, if any matrix has non-unit strides in both dimensions,
the problem is computed by the conventional implementation.
- Implemented the default sup handler as a front-end to two variants.
bli_gemmsup_ref_var2() provides a block-panel variant (in which the
2nd loop around the microkernel iterates over n and the 1st loop
iterates over m), while bli_gemmsup_ref_var1() provides a panel-block
variant (2nd loop over m and 1st loop over n). However, these variants
are not used by default and provided for reference only. Instead, the
default sup handler calls _var2m() and _var1n(), which are similar
to _var2() and _var1(), respectively, except that they defer to the
sup kernel itself to iterate over the m and n dimension, respectively.
In other words, these variants rely not on microkernels, but on
so-called "millikernels" that iterate along m and k, or n and k.
The benefit of using millikernels is a reduction of function call
and related (local integer typecast) overhead as well as the ability
for the kernel to know which micropanel (A or B) will change during
the next iteration of the 1st loop, which allows it to focus its
prefetching on that micropanel. (In _var2m()'s millikernel, the upanel
of A changes while the same upanel of B is reused. In _var1n()'s, the
upanel of B changes while the upanel of A is reused.)
- Added a new configure option, --[en|dis]able-sup-handling, which is
enabled by default. However, the default thresholds at which the
default sup handler is activated are set to zero for each of the m, n,
and k dimensions, which effectively disables the implementation. (The
default sup handler only accepts the problem if at least one dimension
is smaller than or equal to its corresponding threshold. If all
dimensions are larger than their thresholds, the problem is rejected
by the sup front-end and control is passed back to the conventional
implementation, which proceeds normally.)
- Added support to the cntx_t structure to track new fields related to
the sup framework, most notably:
- sup thresholds: the thresholds at which the sup handler is called.
- sup handlers: the address of the function to call to implement
the level-3 skinny/unpacked matrix implementation.
- sup blocksizes: the register and cache blocksizes used by the sup
implementation (which may be the same or different from those used
by the conventional packm-based approach).
- sup kernels: the kernels that the handler will use in implementing
the sup functionality.
- sup kernel prefs: the IO preference of the sup kernels, which may
differ from the preferences of the conventional gemm microkernels'
IO preferences.
- Added a bool_t to the rntm_t structure that indicates whether sup
handling should be enabled/disabled. This allows per-call control
of whether the sup implementation is used, which is useful for test
drivers that wish to switch between the conventional and sup codes
without having to link to different copies of BLIS. The corresponding
accessor functions for this new bool_t are defined in bli_rntm.h.
- Implemented several row-preferential gemmsup kernels in a new
directory, kernels/haswell/3/sup. These kernels include two general
implementation types--'rd' and 'rv'--for the 6x8 base shape, with
two specialized millikernels that embed the 1st loop within the kernel
itself.
- Added ref_kernels/3/bli_gemmsup_ref.c, which provides reference
gemmsup microkernels. NOTE: These microkernels, unlike the current
crop of conventional (pack-based) microkernels, do not use constant
loop bounds. Additionally, their inner loop iterates over the k
dimension.
- Defined new typedef enums:
- stor3_t: captures the effective storage combination of the level-3
problem. Valid values are BLIS_RRR, BLIS_RRC, BLIS_RCR, etc. A
special value of BLIS_XXX is used to denote an arbitrary combination
which, in practice, means that at least one of the operands is
stored according to general stride.
- threshid_t: captures each of the three dimension thresholds.
- Changed bli_adjust_strides() in bli_obj.c so that bli_obj_create()
can be passed "-1, -1" as a lazy request for row storage. (Note that
"0, 0" is still accepted as a lazy request for column storage.)
- Added support for various instructions to bli_x86_asm_macros.h,
including imul, vhaddps/pd, and other instructions related to integer
vectors.
- Disabled the older small matrix handling code inserted by AMD in
bli_gemm_front.c, since the sup framework introduced in this commit
is intended to provide a more generalized solution.
- Added test/sup directory, which contains standalone performance test
drivers, a Makefile, a runme.sh script, and an 'octave' directory
containing scripts compatible with GNU Octave. (They also may work
with matlab, but if not, they are probably close to working.)
- Reinterpret the storage combination string (sc_str) in the various
level-3 testsuite modules (e.g. src/test_gemm.c) so that the order
of each matrix storage char is "cab" rather than "abc".
- Comment updates in level-3 BLAS API wrappers in frame/compat.
Details:
- Changed the default installation prefix from $HOME/lib to /usr/local.
- Modified the way configure internally handles the prefix, libdir,
includedir, and sharedir (and also added an --exec-prefix option).
The defaults to these variables are set as follows:
prefix: /usr/local
exec_prefix: ${prefix}
libdir: ${exec_prefix}/lib
includedir: ${prefix}/include
sharedir: ${prefix}/share
The key change, aside from the addition of exec_prefix and its use to
define the default to libdir, is that the variables are substituted
into config.mk with quoting that delays evaluation, meaning the
substituted values may contain unevaluated references to other
variables (namely, ${prefix} and ${exec_prefix}). This more closely
follows GNU conventions, including those used by GNU autoconf, and
also allows make to override any one of the variables *after*
configure has already been run (e.g. during 'make install').
- Updates to build/config.mk.in pursuant to above changes.
- Updates to output of 'configure --help' pursuant to above changes.
- Updated docs/BuildSystem.md to reflect the new default installation
prefix, as well as mention EXECPREFIX and SHAREDIR.
- Changed the definitions of the UNINSTALL_OLD_* variables in the
top-level Makefile to use $(wildcard ...) instead of 'find'. This
was motivated by the new way of handling prefix and friends, which
leads to the 'find' command being run on /usr/local (by default),
which can take a while almost never yielding any benefit (since the
user will very rarely use the uninstall-old targets).
- Removed periods from the end of descriptive output statements (i.e.,
non-verbose output) since those statements often end with file or
directory paths, which get confusing to read when puctuated by a
period.
- Trival change to 'make showconfig' output.
- Removed my name from 'configure --help'. (Many have contributed to it
over the years.)
- In configure script, changed the default state of threading_model
variable from 'no' to 'off' to match that of debug_type, where there
are similarly more than two valid states. ('no' is still accepted
if given via the --enable-debug= option, though it will be
standardized to 'off' prior to config.mk being written out.)
- Minor variable name change in flatten-headers.py that was intended for
32812ff.
- CREDITS file update.
clang -dumpversion gives 4.2.1 for all clang versions as clang was
originally compatible with gcc 4.2.1
Apple clang version and clang version are two different things
and the real clang version cannot be deduced from apple clang version
programatically. Rely on wikipedia to map apple clang to clang version
Also fixes assembly detection with clang
clang 3.8 can't build knl as it doesn't recognize zmm0
Details:
- Replaced the existing --enable-export-all / --disable-export-all
configure option with --export-shared=[public|all], with the 'public'
instance of the latter corresponding to --disable-export-all and the
'all' instance corresponding to --enable-export-all. Nothing else
semantically about the option, or its default, has changed.
Details:
- Introduced a new configure option, --enable-export-all, which will
cause all shared library symbols to be exported by default, or,
alternatively, --disable-export-all, which will cause all symbols to
be hidden by default, with only those symbols that are annotated for
visibility, via BLIS_EXPORT_BLIS (and BLIS_EXPORT_BLAS for BLAS
symbols), to be exported. The default for this configure option is
--disable-export-all. Thanks to Isuru Fernando for consulting on
this commit.
- Removed BLIS_EXPORT_BLIS annotations from frame/1m/bli_l1m_unb_var1.h,
which was intended for 5a5f494.
- Relocated BLIS_EXPORT-related cpp logic from bli_config.h.in to
frame/include/bli_config_macro_defs.h.
- Provided appropriate logic within common.mk to implement variable
symbol visibility for gcc, clang, and icc (to the extend that each of
these compilers allow).
- Relocated --help text associated with debug option (-d) to configure
slightly further down in the list.
Details:
- Previously, some versions of gcc would complain that the same
pointer, one_r, is being passed in for both alpha and beta in the
fourth call to the real gemm ukernel in bli_gemmtrsm4m1_ref.c. This
is understandable since the compiler knows that the real gemm ukernel
qualifies all of its floating-point arguments (including alpha and
beta) with restrict. A small hack has been inserted into the file
that defines a new variable to store the value 1.0, which is now used
in lieu of one_r for beta in the fourth call to the real gemm ukernel,
which should pacify the compiler now. Thanks to Dave Love for
reporting this issue (#328) and for Devin Matthews for offering his
'restrict' expertise.
Details:
- Added logic to configure that checks the version of the compiler
against known version ranges that could cause problems later in the
build process. For example, versions of gcc older than 4.9.0 use
different -march labels than version 4.9.0 or later
('-march=corei7-avx' vs '-march=sandybridge', respectively).
Similarly, before 6.1, compilation on Zen was possible, but you
need to start with -march=bdver4 and then disable instruction sets
that were discarded during the transition from Excavator to Zen. So
now, configure substitutes 'yes'/'no' values into anchors in
config.mk.in, which sets various make variables (e.g. GCC_OT_4_9_0),
which can be accessed and branched upon by the various
configurations' make_defs.mk files when setting their compiler flags.
- Updated config/haswell/make_defs.mk to branch on GCC_OT_4_9_0.
- Updated config/sandybridge/make_defs.mk to branch on GCC_OT_4_9_0.
- Updated config/zen/make_defs.mk to branch on GCC_OT_6_1_0.
Details:
- Attempted a fix to issue #313, which reports that when building only
a shared library (ie: static library build is disabled), running the
BLAS test drivers can fail because those drivers provide their own
local version of xerbla_() as a clever (albeit still rather hackish)
way of checking the error codes that result from the individual tests.
This local xerbla_() function is never found at link-time because the
BLAS test drivers' Makefile imports BLIS compilation flags via the
get-user-cflags-for() function, which currently conveys the
-fvisibility=hidden flag, which hides symbols unless they are
explicitly annotated for export. The -fvisibility=hidden flag was
only ever intended for use when building BLIS (not for applications),
and so the attempted solution here is to omit the symbol export
flag(s) from get-user-cflags-for() by storing the symbol export
flag(s) to a new BULID_SYMFLAGS variable instead of appending it
to the subconfigurations' CMISCFLAGS variable (which is returned by
every get-*-cflags-for() function). Thanks to M. Zhou for reporting
this issue and also to Isuru Fernando for suggesting the fix.
- Renamed BUILD_FLAGS to BUILD_CPPFLAGS to harmonize with the newly
created BUILD_SYMFLAGS.
- Fixed typo in entry for --export-shared flag in 'configure --help'
text.
Details:
- Commented out redundant setting of LIBBLIS_LINK within all driver-
level Makefiles. This variable is already set within common.mk, and
so the only time it should be overridden is if the user wants to link
to a different copy of libblis.
- Very minor changes to build/gen-make-frags/gen-make-frag.sh.
- Whitespace and inconsequential quoting change to configure.
- Moved top-level 'windows' directory into a new 'attic' directory.
Details:
- Implemented a new sub-framework within BLIS to support the management
of code and kernels that specifically target matrix problems for which
at least one dimension is deemed to be small, which can result in long
and skinny matrix operands that are ill-suited for the conventional
level-3 implementations in BLIS. The new framework tackles the problem
in two ways. First the stripped-down algorithmic loops forgo the
packing that is famously performed in the classic code path. That is,
the computation is performed by a new family of kernels tailored
specifically for operating on the source matrices as-is (unpacked).
Second, these new kernels will typically (and in the case of haswell
and zen, do in fact) include separate assembly sub-kernels for
handling of edge cases, which helps smooth performance when performing
problems whose m and n dimension are not naturally multiples of the
register blocksizes. In a reference to the sub-framework's purpose of
supporting skinny/unpacked level-3 operations, the "sup" operation
suffix (e.g. gemmsup) is typically used to denote a separate namespace
for related code and kernels. NOTE: Since the sup framework does not
perform any packing, it targets row- and column-stored matrices A, B,
and C. For now, if any matrix has non-unit strides in both dimensions,
the problem is computed by the conventional implementation.
- Implemented the default sup handler as a front-end to two variants.
bli_gemmsup_ref_var2() provides a block-panel variant (in which the
2nd loop around the microkernel iterates over n and the 1st loop
iterates over m), while bli_gemmsup_ref_var1() provides a panel-block
variant (2nd loop over m and 1st loop over n). However, these variants
are not used by default and provided for reference only. Instead, the
default sup handler calls _var2m() and _var1n(), which are similar
to _var2() and _var1(), respectively, except that they defer to the
sup kernel itself to iterate over the m and n dimension, respectively.
In other words, these variants rely not on microkernels, but on
so-called "millikernels" that iterate along m and k, or n and k.
The benefit of using millikernels is a reduction of function call
and related (local integer typecast) overhead as well as the ability
for the kernel to know which micropanel (A or B) will change during
the next iteration of the 1st loop, which allows it to focus its
prefetching on that micropanel. (In _var2m()'s millikernel, the upanel
of A changes while the same upanel of B is reused. In _var1n()'s, the
upanel of B changes while the upanel of A is reused.)
- Added a new configure option, --[en|dis]able-sup-handling, which is
enabled by default. However, the default thresholds at which the
default sup handler is activated are set to zero for each of the m, n,
and k dimensions, which effectively disables the implementation. (The
default sup handler only accepts the problem if at least one dimension
is smaller than or equal to its corresponding threshold. If all
dimensions are larger than their thresholds, the problem is rejected
by the sup front-end and control is passed back to the conventional
implementation, which proceeds normally.)
- Added support to the cntx_t structure to track new fields related to
the sup framework, most notably:
- sup thresholds: the thresholds at which the sup handler is called.
- sup handlers: the address of the function to call to implement
the level-3 skinny/unpacked matrix implementation.
- sup blocksizes: the register and cache blocksizes used by the sup
implementation (which may be the same or different from those used
by the conventional packm-based approach).
- sup kernels: the kernels that the handler will use in implementing
the sup functionality.
- sup kernel prefs: the IO preference of the sup kernels, which may
differ from the preferences of the conventional gemm microkernels'
IO preferences.
- Added a bool_t to the rntm_t structure that indicates whether sup
handling should be enabled/disabled. This allows per-call control
of whether the sup implementation is used, which is useful for test
drivers that wish to switch between the conventional and sup codes
without having to link to different copies of BLIS. The corresponding
accessor functions for this new bool_t are defined in bli_rntm.h.
- Implemented several row-preferential gemmsup kernels in a new
directory, kernels/haswell/3/sup. These kernels include two general
implementation types--'rd' and 'rv'--for the 6x8 base shape, with
two specialized millikernels that embed the 1st loop within the kernel
itself.
- Added ref_kernels/3/bli_gemmsup_ref.c, which provides reference
gemmsup microkernels. NOTE: These microkernels, unlike the current
crop of conventional (pack-based) microkernels, do not use constant
loop bounds. Additionally, their inner loop iterates over the k
dimension.
- Defined new typedef enums:
- stor3_t: captures the effective storage combination of the level-3
problem. Valid values are BLIS_RRR, BLIS_RRC, BLIS_RCR, etc. A
special value of BLIS_XXX is used to denote an arbitrary combination
which, in practice, means that at least one of the operands is
stored according to general stride.
- threshid_t: captures each of the three dimension thresholds.
- Changed bli_adjust_strides() in bli_obj.c so that bli_obj_create()
can be passed "-1, -1" as a lazy request for row storage. (Note that
"0, 0" is still accepted as a lazy request for column storage.)
- Added support for various instructions to bli_x86_asm_macros.h,
including imul, vhaddps/pd, and other instructions related to integer
vectors.
- Disabled the older small matrix handling code inserted by AMD in
bli_gemm_front.c, since the sup framework introduced in this commit
is intended to provide a more generalized solution.
- Added test/sup directory, which contains standalone performance test
drivers, a Makefile, a runme.sh script, and an 'octave' directory
containing scripts compatible with GNU Octave. (They also may work
with matlab, but if not, they are probably close to working.)
- Reinterpret the storage combination string (sc_str) in the various
level-3 testsuite modules (e.g. src/test_gemm.c) so that the order
of each matrix storage char is "cab" rather than "abc".
- Comment updates in level-3 BLAS API wrappers in frame/compat.
Details:
- Changed the default installation prefix from $HOME/lib to /usr/local.
- Modified the way configure internally handles the prefix, libdir,
includedir, and sharedir (and also added an --exec-prefix option).
The defaults to these variables are set as follows:
prefix: /usr/local
exec_prefix: ${prefix}
libdir: ${exec_prefix}/lib
includedir: ${prefix}/include
sharedir: ${prefix}/share
The key change, aside from the addition of exec_prefix and its use to
define the default to libdir, is that the variables are substituted
into config.mk with quoting that delays evaluation, meaning the
substituted values may contain unevaluated references to other
variables (namely, ${prefix} and ${exec_prefix}). This more closely
follows GNU conventions, including those used by GNU autoconf, and
also allows make to override any one of the variables *after*
configure has already been run (e.g. during 'make install').
- Updates to build/config.mk.in pursuant to above changes.
- Updates to output of 'configure --help' pursuant to above changes.
- Updated docs/BuildSystem.md to reflect the new default installation
prefix, as well as mention EXECPREFIX and SHAREDIR.
- Changed the definitions of the UNINSTALL_OLD_* variables in the
top-level Makefile to use $(wildcard ...) instead of 'find'. This
was motivated by the new way of handling prefix and friends, which
leads to the 'find' command being run on /usr/local (by default),
which can take a while almost never yielding any benefit (since the
user will very rarely use the uninstall-old targets).
- Removed periods from the end of descriptive output statements (i.e.,
non-verbose output) since those statements often end with file or
directory paths, which get confusing to read when puctuated by a
period.
- Trival change to 'make showconfig' output.
- Removed my name from 'configure --help'. (Many have contributed to it
over the years.)
- In configure script, changed the default state of threading_model
variable from 'no' to 'off' to match that of debug_type, where there
are similarly more than two valid states. ('no' is still accepted
if given via the --enable-debug= option, though it will be
standardized to 'off' prior to config.mk being written out.)
- Minor variable name change in flatten-headers.py that was intended for
32812ff.
- CREDITS file update.
clang -dumpversion gives 4.2.1 for all clang versions as clang was
originally compatible with gcc 4.2.1
Apple clang version and clang version are two different things
and the real clang version cannot be deduced from apple clang version
programatically. Rely on wikipedia to map apple clang to clang version
Also fixes assembly detection with clang
clang 3.8 can't build knl as it doesn't recognize zmm0
Details:
- Replaced the existing --enable-export-all / --disable-export-all
configure option with --export-shared=[public|all], with the 'public'
instance of the latter corresponding to --disable-export-all and the
'all' instance corresponding to --enable-export-all. Nothing else
semantically about the option, or its default, has changed.
Details:
- Introduced a new configure option, --enable-export-all, which will
cause all shared library symbols to be exported by default, or,
alternatively, --disable-export-all, which will cause all symbols to
be hidden by default, with only those symbols that are annotated for
visibility, via BLIS_EXPORT_BLIS (and BLIS_EXPORT_BLAS for BLAS
symbols), to be exported. The default for this configure option is
--disable-export-all. Thanks to Isuru Fernando for consulting on
this commit.
- Removed BLIS_EXPORT_BLIS annotations from frame/1m/bli_l1m_unb_var1.h,
which was intended for 5a5f494.
- Relocated BLIS_EXPORT-related cpp logic from bli_config.h.in to
frame/include/bli_config_macro_defs.h.
- Provided appropriate logic within common.mk to implement variable
symbol visibility for gcc, clang, and icc (to the extend that each of
these compilers allow).
- Relocated --help text associated with debug option (-d) to configure
slightly further down in the list.
Details:
- Replaced direct usage of _Pragma( "omp simd" ) in reference kernels
with PRAGMA_SIMD, which is defined as a function of the compiler being
used in a new bli_pragma_macro_defs.h file. That definition is cleared
when BLIS detects that the -fopenmp-simd command line option is
unsupported. Thanks to Devin Matthews and Jeff Hammond for suggestions
that guided this commit.
- Updated configure and bli_config.h.in so that the appropriate anchor
is substituted in (when the corresponding pragma omp simd support is
present).
Details:
- Rewrote level-1v, -1f, and -3 reference kernels in terms of simplified
indexing annotated by the #pragma omp simd directive, which a compiler
can use to vectorize certain constant-bounded loops. (The new kernels
actually use _Pragma("omp simd") since the kernels are defined via
templatizing macros.) Modest speedup was observed in most cases using
gcc 5.4.0, which may improve with newer versions. Thanks to Devin
Matthews for suggesting this via issue #286 and #259.
- Updated default blocksizes defined in ref_kernels/bli_cntx_ref.c to
be 4x16, 4x8, 4x8, and 4x4 for single, double, scomplex and dcomplex,
respectively, with a default row preference for the gemm ukernel. Also
updated axpyf, dotxf, and dotxaxpyf fusing factors to 8, 6, and 4,
respectively, for all datatypes.
- Modified configure to verify that -fopenmp-simd is a valid compiler
option (via a new detect/omp_simd/omp_simd_detect.c file).
- Added a new header in which prefetch macros are defined according to
which compiler is detected (via macros such as __GNUC__). These
prefetch macros are not yet employed anywhere, though.
- Updated the year in copyrights of template license headers in
build/templates and removed AMD as a default copyright holder.
Details:
- Add os_name to the list of variables into which the '/' character is
escaped. This is meant to address (or at least make progress toward
addressing) #293. Thanks to Isuru Fernando for spotting this as the
potential fix, and also thanks to M. Zhou for the original report.
Details:
- Relax version blacklisting of python3 to allow 3.4 or later instead
of 3.5 or later. Thanks to Dave Love for pointing out that 3.4 was
sufficient for the purpose of BLIS's build system. (It should be
noted that we're not sure which, if any, python3 versions prior to
3.4 are insufficient, and that the only thing stopping us from
determining this is the fact that these earlier versions of python3
are not readily available for us to test with.)
- Updated docs/BuildSystem.md to be explicit about current python2 vs
python3 version requirements.
Details:
- Output an error message if and when the malloc()-equivalent called by
bli_fmalloc_align() ever returns NULL. Everything was already in place
for this to happen, including the error return code, the error string
sprintf(), the error checking function bli_check_valid_malloc_buf()
definition, and its prototype. Thanks to Minh Quan Ho for pointing out
the missing error message.
- Increased the default block_ptrs_len for each inner pool stored in the
small block allocator from 10 to 25. Under normal execution, each
thread uses only 21 blocks, so this change will prevent the sba from
needing to resize the block_ptrs array of any given inner pool as
threads initially populate the pool with small blocks upon first
execution of a level-3 operation.
- Nix stray newline echo in configure.
Details:
- Implemented a sophisticated data structure and set of APIs that track
the small blocks of memory (around 80-100 bytes each) used when
creating nodes for control and thread trees (cntl_t and thrinfo_t) as
well as thread communicators (thrcomm_t). The purpose of the small
block allocator, or sba, is to allow the library to transition into a
runtime state in which it does not perform any calls to malloc() or
free() during normal execution of level-3 operations, regardless of
the threading environment (potentially multiple application threads
as well as multiple BLIS threads). The functionality relies on a new
data structure, apool_t, which is (roughly speaking) a pool of
arrays, where each array element is a pool of small blocks. The outer
pool, which is protected by a mutex, provides separate arrays for each
application thread while the arrays each handle multiple BLIS threads
for any given application thread. The design minimizes the potential
for lock contention, as only concurrent application threads would
need to fight for the apool_t lock, and only if they happen to begin
their level-3 operations at precisely the same time. Thanks to Kiran
Varaganti and AMD for requesting this feature.
- Added a configure option to disable the sba pools, which are enabled
by default; renamed the --[dis|en]able-packbuf-pools option to
--[dis|en]able-pba-pools; and rewrote the --help text associated with
this new option and consolidated it with the --help text for the
option associated with the sba (--[dis|en]able-sba-pools).
- Moved the membrk field from the cntx_t to the rntm_t. We now pass in
a rntm_t* to the bli_membrk_acquire() and _release() APIs, just as we
do for bli_sba_acquire() and _release().
- Replaced all calls to bli_malloc_intl() and bli_free_intl() that are
used for small blocks with calls to bli_sba_acquire(), which takes a
rntm (in addition to the bytes requested), and bli_sba_release().
These latter two functions reduce to the former two when the sba pools
are disabled at configure-time.
- Added rntm_t* arguments to various cntl_t and thrinfo_t functions, as
required by the new usage of bli_sba_acquire() and _release().
- Moved the freeing of "old" blocks (those allocated prior to a change
in the block_size) from bli_membrk_acquire_m() to the implementation
of the pool_t checkout function.
- Miscellaneous improvements to the pool_t API.
- Added a block_size field to the pblk_t.
- Harmonized the way that the trsm_ukr testsuite module performs packing
relative to that of gemmtrsm_ukr, in part to avoid the need to create
a packm control tree node, which now requires a rntm_t that has been
initialized with an sba and membrk.
- Re-enable explicit call bli_finalize() in testsuite so that users who
run the testsuite with memory tracing enabled can check for memory
leaks.
- Manually imported the compact/minor changes from 61441b24 that cause
the rntm to be copied locally when it is passed in via one of the
expert APIs.
- Reordered parameters to various bli_thrcomm_*() functions so that the
thrcomm_t* to the comm being modified is last, not first.
- Added more descriptive tracing for allocating/freeing small blocks and
formalized via a new configure option: --[dis|en]able-mem-tracing.
- Moved some unused scalm code and headers into frame/1m/other.
- Whitespace changes to bli_pthread.c.
- Regenerated build/libblis-symbols.def.
Details:
- Removed explicit reference to The University of Texas at Austin in the
third clause of the license comment blocks of all relevant files and
replaced it with a more all-encompassing "copyright holder(s)".
- Removed duplicate words ("derived") from a few kernels' license
comment blocks.
- Homogenized license comment block in kernels/zen/3/bli_gemm_small.c
with format of all other comment blocks.
Details:
- Print an error message from configure if the user attempts to
explicitly configure BLIS for simultaneous use of 64-bit integers in
the BLAS API with 32-bit integers in the BLIS API.
- Added cpp macro conditional to bli_type_defs.h to mandate that BLIS
integers be 64 bits if the BLAS integers are 64 bits. This and the
above item take care of issue #274. Thanks to Devin Matthews and
Jeff Hammond for suggesting these safeguards.
- Slight reorganization and relabeling (for clarity) of BLAS/CBLAS
sections and BLIS integer size line of the testsuite configuration
output.
- Very minor edits to docs/MixedDatatypes.md.
Details:
- Expanded the bli_pthread_*() -> pthread_*() wrappers in
frame/thread/bli_pthread.c to include cases for Windows taken from
frame/base/bli_pthread_wrap.c. Now, bli_thread_*() is always defined
and always used by BLIS and the BLIS testsuite (in lieu of calling
pthreads directly, as before). The implementation used in this new
API depends on whether we are building for Windows, and to a lesser
extent, whether we are building on OS X. For the core API, Windows
uses Windows threads, non-Windows (Linux, OS X) uses pthreads.
OS X and Windows get barriers implemented in terms of other
bli_pthread_*() functions, and Linux gets barriers implemented in
terms of pthread_barrier*(). This commit addresses issue #273.
- Fixed a bug in the Linux definition of bli_pthread_mutex_unlock(),
which was erroneously calling pthread_mutex_lock().
- Minor changes to configure so that the auto-detection executable
can be built given the above changes (most notably, turning on
POSIX extensions via -D_GNU_SOURCE).
- Removed temporary play-test code for shiftd that accidentally got
committed into test/3m4m/test_gemm.c.
Details:
- Added python version checking to configure script. (Recall that python
is needed to execute the flatten-headers.py script.) Minimum versions
of python needed are currently as follows:
python2: 2.7 or later
python3: 3.5 or later
The standard search order for python interpeters is:
python python3 python2
The PYTHON environment variable is also supported and will be checked
before the standard search order list.
- Updated BuildSystem.md to include: a minimum make version; mention
that the C compiler must actually be a C99 compiler; and the caveat
that Windows builds do not require pthreads since BLIS can provide
an implementation of pthreads internally.
Details:
- Implemented support for gemm where A, B, and C may have different
storage datatypes, as well as a computational precision (and implied
computation domain) that may be different from the storage precision
of either A or B. This results in 128 different combinations, all
which are implemented within this commit. (For now, the mixed-datatype
functionality is only supported via the object API.) If desired, the
mixed-datatype support may be disabled at configure-time.
- Added a memory-intensive optimization to certain mixed-datatype cases
that requires a single m-by-n matrix be allocated (temporarily) per
call to gemm. This optimization aims to avoid the overhead involved in
repeatedly updating C with general stride, or updating C after a
typecast from the computation precision. This memory optimization may
be disabled at configure-time (provided that the mixed-datatype
support is enabled in the first place).
- Added support for testing mixed-datatype combinations to testsuite.
The user may test gemm with mixed domains, precisions, both, or
neither.
- Added a standalone test driver directory for building and running
mixed-datatype performance experiments.
- Defined a new variation of castm, castnzm, which operates like castm
except that imaginary values are not touched when casting a real
operand to a complex operand. (By contrast, in these situations castm
sets the imaginary components of the destination matrix to zero.)
- Defined bli_obj_imag_is_zero() and substituted calls in lieu of all
usages of bli_obj_imag_equals() that tested against BLIS_ZERO, and
also simplified the implementation of bli_obj_imag_equals().
- Fixed bad behavior from bli_obj_is_real() and bli_obj_is_complex()
when given BLIS_CONSTANT objects.
- Disabled dt_on_output field in auxinfo_t structure as well as all
accessor functions. Also commented out all usage of accessor
functions within macrokernels. (Typecasting in the microkernel is
still feasible, though probably unrealistic for now given the
additional complexity required.)
- Use void function pointer type (instead of void*) for storing function
pointers in bli_l0_fpa.c.
- Added documentation for using gemm with mixed datatypes in
docs/MixedDatatypes.md and example code in examples/oapi/11gemm_md.c.
- Defined level-1d operation xpbyd and level-1m operation xpbym.
- Added xpbym test module to testsuite.
- Updated frame/include/bli_x86_asm_macros.h with additional macros
(courtsey of Devin Matthews).
