* Fix detection of systems other than Linux and macOS
The way the logic is currently laid out, any platform that isn't Linux
gets assigned the .dylib shared library extension and the macOS-specific
compiler flags. This reverses the logic to check for macOS first, and
have the fallback use the Linux definitions, which apply to most other
systems as well.
* Use SHLIB_EXT instead of SO_SUF
The former is more standard, as jakirkham pointed out in a comment.
Details:
- Historically, the compiler selection has happened statically in the
various make_defs.mk and would only be overriden by setting CC (either
prior to running configure or as a configure argument). However, in
the last couple months, configure has evolved to contain rather
sophisticated compiler detection logic for the purposes of blacklisting
sub-configurations. It only makes sense that configure now fully take
over the responsibility of selecting a compiler from the GNU make side
of the build system. Thanks to Alex Arslan for his help exposing this
issue.
- Substitute found_cc into CC in config.mk via configure.
- Set a new variable, CC_VENDOR, in config.mk via substitution from
configure, and disable the corresponding CC_VENDOR code in common.mk.
- Disabled default compiler selection (usually gcc) in the sub-configs'
various make_def.mk files.
Details:
- Use the .dylib shared library suffix on OS X (instead of .so in Linux).
- Link with the -dynamiclib and -install_name options on OS X (instead of
-shared and -soname in Linux).
- Determine operating system (e.g. Linux, Darwin) during configure and
substitute into config.mk.in rather than run 'uname -s' during make.
- Echo operating system during configure.
Details:
- Changed the naming conventions used for installed libraries and
symlinks to more closely mirror patterns used by typical GNU/Linux
libraries. Whereas previously static and shared libraries were
installed and symlinked as follows:
(library) libblis-0.3.2-15-haswell.a
(library) libblis-0.3.2-15-haswell.so
(symlink) libblis.a -> libblis-0.3.2-15-haswell.a
(symlink) libblis.so -> libblis-0.3.2-15-haswell.so
we now use the following naming conventions:
(library) libblis.a
(symlink) libblis.so -> libblis.so.0.1.2
(symlink) libblis.so.0 -> libblis.so.0.1.2
(library) libblis.so.0.1.2
where 0.1.2 indicates shared library major, minor, and build versions
of 0, 1, and 2, respectively. The conventional version string can
still be queried by linking to the library in question and then calling
bli_info_get_version_str(). (The testsuite binary does this
automatically at startup.)
- Added logic to common.mk to set the soname field in the shared library
via the -soname linker flag.
- Added a 'so_version' file to the top-level directory containing two
lines. The first line specifies the .so major version number, and the
second line specifies the minor and build version numbers joined with
a '.'. This file is read by configure and those values substituted
into build/config.mk.in to define SO_MAJOR, SO_MINORB, and SO_MMB
variables.
Details:
- Renamed the following variables in config.mk (via build/config.mk.in):
BLIS_ENABLE_VERBOSE_MAKE_OUTPUT -> ENABLE_VERBOSE
BLIS_ENABLE_STATIC_BUILD -> MK_ENABLE_STATIC
BLIS_ENABLE_SHARED_BUILD -> MK_ENABLE_SHARED
BLIS_ENABLE_BLAS2BLIS -> MK_ENABLE_BLAS
BLIS_ENABLE_CBLAS -> MK_ENABLE_CBLAS
BLIS_ENABLE_MEMKIND -> MK_ENABLE_MEMKIND
and also renamed all uses of these variables in makefiles and makefile
fragments. Notice that we use the "MK_" prefix so that those variables
can be easily differentiated (such as via grep) from their "BLIS_" C
preprocessor macro counterparts.
- Other whitespace changes to build/config.mk.in.
- Renamed the following C preprocessor macros in bli_config.h (via
build/bli_config.h.in):
BLIS_ENABLE_BLAS2BLIS -> BLIS_ENABLE_BLAS
BLIS_DISABLE_BLAS2BLIS -> BLIS_DISABLE_BLAS
BLIS_BLAS2BLIS_INT_TYPE_SIZE -> BLIS_BLAS_INT_TYPE_SIZE
and also renamed all relevant uses of these macros in BLIS source
files.
- Renamed "blas2blis" variable occurrences in configure to "blas", as
was done in build/config.mk.in and build/bli_config.h.in.
- Renamed the following functions in frame/base/bli_info.c:
bli_info_get_enable_blas2blis() -> bli_info_get_enable_blas()
bli_info_get_blas2blis_int_type_size()
-> bli_info_get_blas_int_type_size()
- Remove bli_config.h during 'make cleanh' target of top-level Makefile.
Details:
- Added support for two new configure options: --libdir and --includedir.
They specify the precise install directories for libraries and header
files, respectively, and override any location implied by the --prefix
option (including the default install prefix, if --prefix was not
given). Thanks to Nico Schlömer for suggesting this via issue #195.
- Removed the INSTALL_PREFIX definition/anchor from build/config.mk.in
and replaced it with corresponding definitions/anchors for libdir and
includedir.
- Updated top-level Makefile to use the new variables, INSTALL_LIBDIR
and INSTALL_INCDIR, instead of INSTALL_PREFIX (which is now no longer
needed by make).
- Set default sane values for INSTALL_LIBDIR and INSTALL_INCDIR in
common.mk when configure has not been run, as is already done for
DIST_PATH. This is to safeguard against statements in the top-level
Makefile that use 'find' to locate old libraries and headers for the
uninstall targets, which run regardless of make target. Without setting
INSTALL_LIBDIR and INSTALL_INCDIR, those variables are empty and the
'find' ends up looking at '/', which is obviously not what we want.
(Also enclosed those definitions in an IS_CONFIGURED guard so that they
won't get evaluated unless configure has been run.)
- Rearranged "ifeq ($(IS_CONFIGURED),yes)" conditionals in Makefile to
reduce occurrences and separated "local" and top-level components of
cleanblastest and cleanblistest targets to improve readability.
- Adjusted out-of-tree builds so that they are no longer oblivious to
the .git directories, if present, and thus now properly augment version
strings with the appropriate patch number.
- Include missing version string in 'configure --help' output.
Details:
- Modified top-level Makefile so that a user can run 'make distclean',
'make clean', or any of the other clean-related targets prior to
running configure (or after a previous 'make distclean'). Thanks to
Nico Schlömer for suggesting this via issue #197.
- Made the cleanblastest and cleanblistest more comprehensive in that
they now clean out build products that would have resulted from local
compilation (ie: builds performed within the 'blastest' or 'testsuite'
directories).
- Added "cc" to list of expected compiler "vendors" since the CC variable
seems to automatically be set to "cc" on Ubuntu 16.04 (which is just an
alias to gcc).
- Comment update to build/config.mk.in.
Details:
- Execute 'cleanh' target as part of 'clean'
- Remove cblas.h file from 'include/<configname>/' as part of 'cleanh'
target.
- Updated the echoed (non-verbose) text for uniformity.
Details:
- Added bli_setgetijm.c, which defines bli_setijm(), bli_getijm(), and
related functions that can be used to read and write individual
elements of an obj_t.
- Defined a new function, bli_obj_create_conf_to(), in bli_obj.c that will
create a new object with dimensions conformal to an existing object.
Transposition and conjugation states on the existing object are ignored,
as are structure and uplo fields.
- Defined a new function, bli_datatype_string(), in bli_obj.c that returns
a char* to a string representation of the name of each num_t datatype.
For example, BLIS_DOUBLE is "double" and BLIS_DCOMPLEX is "dcomplex".
BLIS_INT is included (as "int"), but BLIS_CONSTANT is not, and thus is
not a valid input argument to bli_datatype_string().
- Added calls to bli_init_once() to various functions in bli_obj.c, the
most important of which was bli_obj_create_without_buffer().
- Removed unintended/extra newline from the end of printv output.
- Whitespace changes to
- frame/base/bli_machval.c
- frame/base/bli_machval.h
- frame/0/copysc/bli_copysc.c
- Trivial changes to README.md and common.mk.
Details:
- Removed some old conditional code in config/knl/make_defs.mk that
added -lmemkind to LDFLAGS if DEBUG_TYPE was not 'sde' and inserted
code into common.mk that affirmatively filters out -lmemkind from
LDFLAGS if DEBUG_TYPE is 'sde'. (Thanks to Dave Love for reporting
this issue.) Other minor cleanups to neighboring code in common.mk.
- Updated CRVECFLAGS in knl/make_defs.mk to be based on -march=knl,
and then AVX-512 functionality is manually removed via various
-mno-avx512* flags. Also, make the setting of CRVECFLAGS conditional
on CC_VENDOR. Similar change to skx/make_defs.mk.
- Comment/whitespace updates.
Details:
- Renamed CVECFLAGS variables in sub-configurations' make_defs.mk files
to CKVECFLAGS.
- Added default defintions of two new make variables to most sub-
configurations' make_defs.mk files--CROPTFLAGS and CRVECFLAGS--
which correspond to reference kernel analogues of the CKOPTFLAGS
and CKVECFLAGS, which track optimization and vectorization flags for
optimized kernels. Currently, two sub-configurations (knl and skx)
explicitly set CRVECFLAGS to non-default values (using AVX2 instead of
AVX-512 for reference kernels. Thanks to Jeff Hammond, whose feedback
prompted me to make this change (issue #187).
- Changed common.mk so that the get-refkern-cflags-for function returns
the flags associated with the given sub-configuration's CROPTFLAGS
and CRVECFLAGS (instead of CKOPTFLAGS and CKVECFLAGS).
Details:
- Updated the build system and BLAS test drivers to use 64-bit integers
when BLIS is configured for 64-bit integers in the BLAS layer. Also
updated blastest/Makefile accordingly. Thanks to Dave Love for
reporting the need for this feature.
- Added a 'check' target to blastest/Makefile so that the user can see
a summary of the tests.
- Commented out the initial definition of INCLUDE_PATHS in common.mk,
which was used pre-monolithic header, back when BLIS needed paths to
*all* headers, rather than just a select few. This line is no longer
needed since the value of INCLUDE_PATHS is overwritten by a later
definition limited to only the header paths that are needed now.
Details:
- Removed CKOPTFLAGS and CVECFLAGS from the set of CFLAGS used to
compile bli_cntx_ref.c for each configuration. This is necessary
because the file defines functions like bli_cntx_init_skx_ref(),
which are called during BLIS's initialization of the global kernel
structure, potentially being executed by an architecture that lacks
the instruction set used to compile the kernels for, in this example,
skx, which would lead to an illegal instruction error. Thanks to
Dave Love for reporting this issue.
- Further adjusted CFLAGS used when compiling code in the 'config'
directory (e.g. bli_cntx_init_skx.c) as well as code in 'frame' so
as to avoid the aforementioned issue.
Details:
- Added support for libmemkind to configure. configure attempts to
detect the presence of libmemkind by compiling a small program
containing #include <hbwmalloc.h> and a call to hbw_malloc(). If
successful, it is assumed that libmemkind is present and available.
If present, use of libmemkind is enabled by default, and otherwise
use is disabled by default. If libmemkind is present, the user may
explicitly disable use of the library by running configure with the
--without-memkind option. Furthermore, a configuration may disable
libmemkind, perhaps conditional on some aspect of the build system,
by including -DBLIS_DISABLE_MEMKIND in the configuration's CPPROCFLAGS
make variable and setting the BLIS_ENABLE_MEMKIND makefile variable,
set in config.mk, to 'no'. (The knl configuration makes use of this
latter feature; see below.)
- If enabled at configure-time, bli_system.h will #include <hbwmalloc.h>
and bli_kernel_macro_defs.h will define BLIS_MALLOC_POOL and
BLIS_FREE_POOL to use hbw_malloc() and hbw_free(), respectively.
- Deprecated explicit use of BLIS_NO_HBWMALLOC in
config/knl/bli_family.knl.h and replaced use of -DBLIS_NO_HBWMALLOC in
config/knl/make_defs.mk with -DBLIS_DISABLE_MEMKIND, which overrides
(#undefs) the definition of BLIS_ENABLE_MEMKIND in bli_system.h, if it
would otherwise be defined. Also, set the BLIS_ENABLE_MEMKIND makefile
variable to 'no'.
- common.mk now adds libmemkind to LDFLAGS if libmemkind is enabled.
Details:
- Added logic to common.mk that will choose a BLIS library against which
to link (LIBBLIS_LINK). The default choice is the static (.a) library;
the shared (.so) library is chosen only if the shared library build was
enabled and the static one was disabled.
- Updated the various test driver Makefiles to reference this common,
pre-chosen library against which to link. (Previously, these drivers
unconditionally linked against the static library and would have
failed if the static library build was disabled at configure-time.)
- Renamed many of the variables in common.mk and the top-level Makefile
so that variables relating to the libblis.[a|so] files, including
paths to those files, begin with "LIBBLIS".
- Shuffled around some of the library definitions from the top-level
Makefile to common.mk.
- Renamed BLIS_ENABLE_DYNAMIC_BUILD to BLIS_ENABLE_SHARED_BUILD, and
the @enable_dynamic@ anchor to @enable_shared@ in build/config.mk.in
and in configure.
- A few other cleanups in the top-level Makefile.
Details:
- Added an 'input.operations.fast' file to testsuite directory to go
along with the 'input.general.fast' file used by the 'make check'
target in the top-level Makefile. This will allow the "fast" check
to prune operations and/or parameter combinations from the test
space in order to save time.
- Currently, input.operations.fast prunes trmm3 and all transposition
and conjugation parameters from the level-3 test space.
- Reduced problem size tested in input.general.fast to 100 and disabled
testing of 1m method.
Details:
- Created a new test suite that exercises only the BLAS compatibility
found in BLIS. The test suite is a straightforward port of code
obtained from netlib LAPACK, run through f2c and linked to a stripped-
down version of libf2c that is compiled along with the test drivers
(to prevent any obvious ABI issues). The new BLAS test suite can be
run from within its new local directory, 'blastest' (through its local
'make ; make run' targets) or from the top-level Makefile (via the
'make testblas' target). Output files are created in whatever directory
the test drivers are run, whether it be the 'blastest' directory, the
top-level source distribution directory, or the out-of-tree directory
in which 'configure' was run. Also, the results of the BLAS test suite
can be checked via 'make checkblas', which summarizes the presence or
absence of test failures in a single line printed to stdout.
- Updated the 'test' target to run both 'testblis' and 'testblas'.
- Added a new 'testblis-fast' target that runs the BLIS testsuite with
smaller problem sizes, allowing it to finish more quickly.
- Added a 'make check' target, which runs 'checkblis-fast' and
'checkblas'.
- Changed .travis.yml so that Travis CI runs 'testblis-fast' instead of
'testblis' before (calling the check-blistest.sh script to check the
result manually).
- Renamed some targets in the top-level Makefile to be consistent between
BLAS and BLIS.
Details:
- Reorganized linker-related section of common.mk so that LDFLAGS set
in a sub-configuration's make_defs.mk file will not be immediately
(and erroneously) overridden by the default values.
- Re-enabled redirected (to file) output of the testsuite when run from
the top-level Makefile via 'make test'. (For some reason, it was
commented-out for the non-verbose case.)
- Removed old/unnecessary code from the make_defs.mk files of skx and
knl sub-configurations.
Details:
- Fixed a bug in common.mk that caused warning, position-independent
code, miscellaneous, and general preprocessor flags to be omitted
from the configuration family-specific variables that hold those
values, as registered by the family's make_defs.mk file. This would
most obviously manifest when targeting a configuration family such as
'intel64' while simultaneously configuring for a shared object build,
as the key '-fPIC' flag would be omitted at compile-time and prevent
successful linking. Thanks to Dave Love for reporting this bug.
- Other cleanups to common.mk for readability and clarity.
Details:
- Rewrote code that selects the compiler for the purposes of compiling
the auto-detection executable. CC (if specified) is tried first. Then
gcc. Then clang. The absolute fallback is cc. The previous code was
sort of broken, and seemed to unintentionally always use gcc.
- Moved various configuration-agnostic flags from config/*/make_defs.mk
files to common.mk. The new mechanism appends the configuration-
agnostic flags to the various compiler flag variables initialized in
make_defs.mk. Flags specific to the sub-configuration are still set
in make_defs.mk.
- Added -Wno-tautological-compare to CMISCFLAGS when clang is in use.
Also added the flag to the compiler instantiation during configure-
time hardware detection (when clang is selected).
- Added some missing (but mostly-optional) quotes to configure script.
Details:
- Added flatten-headers.py, a python implementation of the bash script
flatten-headers.sh. The new script appears to be 25-100x faster,
depending on the operating system, filesystem, etc. The python script
abides by the same command line interface as its predecessor and
targets python 2.7 or later. (Thanks to Devin Matthews for suggesting
that I look into a python replacement for higher performance.)
- Activated use of flatten-headers.py in common.mk via the FLATTEN_H
variable.
- Made minor tweaks to flatten-headers.sh such as spelling corrections
in comments.
Details:
- Fixed a makefile error encountered when building the testsuite directly
in its directory (as opposed to indirectly via 'make test'). The fix
involves introducing a new variable, BUILD_PATH, alongside the existing
DIST_PATH variable. By default, BUILD_PATH is set to the current
directory, and is overridden by other Makefiles used by, for example,
the testsuite and standalone test drivers in testsuite or test,
respectively.
- Some files/directories in common.mk were redefined in terms of
BUILD_DIR, such as the locations of config.mk file and the intermediate
include directory.
Details:
- Found the likely cause of the Travis CI out-of-tree build failures:
config.mk was being read from DIST_PATH, rather than the current
directory.
Details:
- Defined the SHELL variable in common.mk as "/bin/bash" so that the
-n option can be used with echo in the Makefile rule for flattening
blis.h. Thanks to Devin Matthews for suggesting this fix.
Details:
- Fix applied in 87978f6 was necessary but not sufficient to fix
out-of-tree builds. It turns out that using a source tree that had
already built the target erroneously gave the impression that
out-of-tree builds were working again, when in fact they were still
broken. The additional changes in this commit should complete the
fix that was started in the aforementioned commit. Thanks to Devin
Matthews and Shaden Smith for their help in isolating this issue.
Details:
- Defined two new functions in bli_init.c: bli_init_once() and
bli_finalize_once(). Each is implemented with pthread_once(), which
guarantees that, among the threads that pass in the same pthread_once_t
data structure, exactly one thread will execute a user-defined function.
(Thus, there is now a runtime dependency against libpthread even when
multithreading is not enabled at configure-time.)
- Added calls to bli_init_once() to top-level user APIs for all
computational operations as well as many other functions in BLIS to
all but guarantee that BLIS will self-initialize through the normal
use of its functions.
- Rewrote and simplified bli_init() and bli_finalize() and related
functions.
- Added -lpthread to LDFLAGS in common.mk.
- Modified the bli_init_auto()/_finalize_auto() functions used by the
BLAS compatibility layer to take and return no arguments. (The
previous API that tracked whether BLIS was initialized, and then
only finalized if it was initialized in the same function, was too
cute by half and borderline useless because by default BLIS stays
initialized when auto-initialized via the compatibility layer.)
- Removed static variables that track initialization of the sub-APIs in
bli_const.c, bli_error.c, bli_init.c, bli_memsys.c, bli_thread, and
bli_ind.c. We don't need to track initialization at the sub-API level,
especially now that BLIS can self-initialize.
- Added a critical section around the changing of the error checking
level in bli_error.c.
- Deprecated bli_ind_oper_has_avail() as well as all functions
bli_<opname>_ind_get_avail(), where <opname> is a level-3 operation
name. These functions had no use cases within BLIS and likely none
outside of BLIS.
- Commented out calls to bli_init() and bli_finalize() in testsuite's
main() function, and likewise for standalone test drivers in 'test'
directory, so that self-initialization is exercised by default.
Details:
- Added missing $(DIST_PATH)/ prefix to relative path to flatten-headers.sh
script in common.mk so that the script could be found during out-of-tree
builds. Thanks to Devin Matthews for reporting this bug.
Details:
- When CBLAS is enabled at configure-time, BLIS now creates a monolithic
cblas.h using the same flatten-header.sh script that was recently
introduced for creating monolithic blis.h header files. The top-level
Makefile will also install this cblas.h file into the install prefix
alongside blis.h when the 'install' target is invoked. The two header
files are compatible with one another. Regardless whether the user's
source #includes cblas.h, both blis.h and cblas.h, or just blis.h,
the user will get the CBLAS function prototypes and enums, as expected.
Details:
- Rewrote monolithify-header.sh (and renamed to flatten-header.sh) so that
headers are inserted recursively. This improves performance by a factor
of 3-4x.
- Modified configure to create an 'include/<configname>' directory in which
make can create a monolithic header.
- Modified the top-level Makefile so that a monolithic header is generated
unconditionally prior to compilation (stored in include/<configname>) and
so that the single header is installed instead of the 450 or so header
files that reside throughout the framework source tree.
- Added "include/*/*.h" to .gitignore file.
- Removed some pnacl/emscripten leftovers that I intended to include in
a1caeba (mostly in testsuite/Makefile).
- Trivial comment changes to frame/include/bli_f2c.h.
Details:
- Fixed semi-broken testsuite Makefile and very-broken test driver Makefiles,
as well as those for test/3m4m, test/thread_ranges, and test/exec_sizes
sub-directories.
- Factored out much of the top-level Makefile into common.mk. A Makefile
needs only set DIST_PATH to the relative path to the top level of the
BLIS source distribution before including common.mk in order to acquire
all of the definitions typically needed in a Makefile that tests BLIS.
Details:
- Reworked the build system around a configuration registry file, named
config_registry', that identifies valid configuration targets, their
constituent sub-configurations, and the kernel sets that are needed by
those sub-configurations. The build system now facilitates the building
of a single library that can contains kernels and cache/register
blocksizes for multiple configurations (microarchitectures). Reference
kernels are also built on a per-configuration basis.
- Updated the Makefile to use new variables set by configure via the
config.mk.in template, such as CONFIG_LIST, KERNEL_LIST, and KCONFIG_MAP,
in determining which sub-configurations (CONFIG_LIST) and kernel sets
(KERNEL_LIST) are included in the library, and which make_defs.mk files'
CFLAGS (KCONFIG_MAP) are used when compiling kernels.
- Reorganized 'kernels' directory into a "flat" structure. Renamed kernel
functions into a standard format that includes the kernel set name
(e.g. 'haswell'). Created a "bli_kernels_<kernelset>.h" file in each
kernels sub-directory. These files exist to provide prototypes for the
kernels present in those directories.
- Reorganized reference kernels into a top-level 'ref_kernels' directory.
This directory includes a new source file, bli_cntx_ref.c (compiled on
a per-configuration basis), that defines the code needed to initialize
a reference context and a context for induced methods for the
microarchitecture in question.
- Rewrote make_defs.mk files in each configuration so that the compiler
variables (e.g. CFLAGS) are "stored" (renamed) on a per-configuration
basis.
- Modified bli_config.h.in template so that bli_config.h is generated with
#defines for the config (family) name, the sub-configurations that are
associated with the family, and the kernel sets needed by those
sub-configurations.
- Deprecated all kernel-related information in bli_kernel.h and transferred
what remains to new header files named "bli_arch_<configname>.h", which
are conditionally #included from a new header bli_arch.h. These files
are still needed to set library-wide parameters such as custom
malloc()/free() functions or SIMD alignment values.
- Added bli_cntx_init_<configname>.c files to each configuration directory.
The files contain a function, named the same as the file, that initializes
a "native" context for a particular configuration (microarchitecture). The
idea is that optimized kernels, if available, will be initialized into
these contexts. Other fields will retain pointers to reference functions,
which will be compiled on a per-configuration basis. These bli_cntx_init_*()
functions will be called during the initialization of the global kernel
structure. They are thought of as initializing for "native" execution, but
they also form the basis for contexts that use induced methods. These
functions are prototyped, along with their _ref() and _ind() brethren, by
prototype-generating macros in bli_arch.h.
- Added a new typedef enum in bli_type_defs.h to define an arch_t, which
identifies the various sub-configurations.
- Redesigned the global kernel structure (gks) around a 2D array of cntx_t
structures (pointers to cntx_t, actually). The first dimension is indexed
over arch_t and the inner dimension is the ind_t (induced method) for
each microarchitecture. When a microarchitecture (configuration) is
"registered" at init-time, the inner array for that configuration in the
2D array is initialized (and allocated, if it hasn't been already). The
cntx_t slot for BLIS_NAT is initialized immediately and those for other
induced method types are initialized and cached on-demand, as needed. At
cntx_t registration, we also store function pointers to cntx_init functions
that will initialize (a) "reference" contexts and (b) contexts for use with
induced methods. We don't cache the full contexts for reference contexts
since they are rarely needed. The functions that initialize these two kinds
of contexts are generated automatically for each targeted sub-configuration
from cpp-templatized code at compile-time. Induced method contexts that
need "stage" adjustments can still obtain them via functions in
bli_cntx_ind_stage.c.
- Added new functions and functionality to bli_cntx.c, such as for setting
the level-1f, level-1v, and packm kernels, and for converting a native
context into one for executing an induced method.
- Moved the checking of register/cache blocksize consistency from being cpp
macros in bli_kernel_macro_defs.h to being runtime checks defined in
bli_check.c and called from bli_gks_register_cntx() at the time that the
global kernel structure's internal context is initialized for a given
microarchitecture/configuration.
- Deprecated all of the old per-operation bli_*_cntx.c files and removed
the previous operation-level cntx_t_init()/_finalize() invocations.
Instead, we now query the gks for a suitable context, usually via
bli_gks_query_cntx().
- Deprecated support for the 3m2 and 3m3 induced methods. (They required
hackery that I was no longer willing to support.)
- Consolidated the 1e and 1r packm kernels for any given register blocksize
into a single kernel that will branch on the schema and support packing
to both formats.
- Added the cntx_t* argument to all packm kernel signatures.
- Deprecated the local function pointer array in all bli_packm_cxk*.c files
and instead obtain the packm kernel from the cntx_t.
- Added bli_calloc_intl(), which serves as the calloc-equivalent to to
bli_malloc_intl(). Useful when we wish to allocate and initialize to
zero/NULL.
- Converted existing cpp macro functions defined in bli_blksz.h, bli_func.h,
bli_cntx.h into static functions.
Details:
- Forgot to update certain occurrences of "omp" in common.mk during
commit fd04869, which changed the preferred configure option string
for enabling OpenMP from "omp" to "openmp".
Options to configure have been added for:
- Setting the internal BLIS and BLAS/CBLAS integer sizes.
- Enabling and disabling the BLAS and CBLAS layers.
Additionally, configure options which require defining macros (the above plus the threading model), write their macros to the automatically-generated bli_config.h file in the top-level build directory. The old bli_config.h files in the config dirs were removed, and any kernel-related macros (SIMD size and alignment etc.) were moved to bli_kernel.h. The Makefiles were also modified to find the new bli_config.h file.
Lastly, support for OMP in clang has been added (closes#56).
Getting pthreads to work on my Mac
Implemented a pthread barrier when _POSIX_BARRIER isn't defined
Now spawn n-1 threads instead of n threads so that master thread isn't just spinning the whole time
Add -lpthread instead of -pthread to LDFLAGS (for clang)
