Details:
- Converted most C preprocessor macros in bli_param_macro_defs.h and
bli_obj_macro_defs.h to static functions.
- Reshuffled some functions/macros to bli_misc_macro_defs.h and also
between bli_param_macro_defs.h and bli_obj_macro_defs.h.
- Changed obj_t-initializing macros in bli_type_defs.h to static
functions.
- Removed some old references to BLIS_TWO and BLIS_MINUS_TWO from
bli_constants.h.
- Whitespace changes in select files (four spaces to single tab).
Details:
- Imported the 24x16 knl sgemm microkernel (and its corresonding spackm
kernel) from TBLIS and enabled its use in the knl sub-config. Also
Added sgemm microkernel prototype to bli_kernels_knl.h.
- Updated dgemm and dpackm microkernels from TBLIS, which included an
important change regarding the offsets array (changed from extern
declaration to static declaration/definition).
- Activated use of level-1v and -1f zen kernels in skx and knl
sub-configs.
- Removed some old macros no longer needed in bli_family_skx.h now that
libmemkind support exists in configure.
- Moved bli_avx512_macros.h to frame/include and adjusted #includes in
skx and knl kernels accordingly.
- Moved unused kernels in kernels/knl/3 to kernels/knl/3/other
directory.
- Fixed a minor bug in the 'make' output per compile when verboseness
is not turned on. The rule-generating function 'make-kernel-rule' was
previously passing in the name of the config, rather than the name of
the kernel set returned by get-config-for-kset, which could give
misleading information to the user when the kconfig_map mapped a
kernel set to a sub-configuration that did not share the same name.
(This didn't affect the CFLAGS that were actually used.)
- Updated test/3m4m/Makefile, removing acml targets and renaming the
remaining targets.
Details:
- Added logic to common.mk that will choose a BLIS library against which
to link (LIBBLIS_LINK). The default choice is the static (.a) library;
the shared (.so) library is chosen only if the shared library build was
enabled and the static one was disabled.
- Updated the various test driver Makefiles to reference this common,
pre-chosen library against which to link. (Previously, these drivers
unconditionally linked against the static library and would have
failed if the static library build was disabled at configure-time.)
- Renamed many of the variables in common.mk and the top-level Makefile
so that variables relating to the libblis.[a|so] files, including
paths to those files, begin with "LIBBLIS".
- Shuffled around some of the library definitions from the top-level
Makefile to common.mk.
- Renamed BLIS_ENABLE_DYNAMIC_BUILD to BLIS_ENABLE_SHARED_BUILD, and
the @enable_dynamic@ anchor to @enable_shared@ in build/config.mk.in
and in configure.
- A few other cleanups in the top-level Makefile.
Details:
- Merged contributions made by AMD via 'amd' branch (see summary below).
Special thanks to AMD for their contributions to-date, especially with
regard to intrinsic- and assembly-based kernels.
- Added column storage output cases to microkernels in
bli_gemm_zen_asm_d6x8.c and bli_gemmtrsm_l_zen_asm_d6x8.c. Even with
the extra cost of transposing the microtile in registers, this is
much faster than using the general storage case when the underlying
matrix is column-stored.
- Added s and d assembly-based zen gemmtrsm_u microkernel (including
column storage optimization mentioned above).
- Updated zen sub-configuration to reflect presence of new native
kernels.
- Temporarily reverted zen sub-configuration's level-3 cache blocksizes
to smaller haswell values.
- Temporarily disabled small matrix handling for zen configuration
family in config/zen/bli_family_zen.h.
- Updated zen CFLAGS according to changes in 1e4365b.
- Updated haswell microkernels such that:
- only one vzeroupper instruction is called prior to returning
- movapd/movupd are used in leiu of movaps/movups for double-real
microkernels. (Note that single-real microkernels still use
movaps/movups.)
- Added kernel prototypes to kernels/zen/bli_kernels_zen.h, which is
now included via frame/include/bli_arch_config.h.
- Minor updates to bli_amaxv_ref.c (and to inlined "test" implementation
in testsuite/src/test_amaxv.c).
- Added early return for alpha == 0 in bli_dotxv_ref.c.
- Integrated changes from f07b176, including a fix for undefined
behavior when executing the 1m method under certain conditions.
- Updated config_registry; no longer need haswell kernels for zen
sub-configuration.
- Tweaked marginal and pass thresholds for dotxf.
- Reformatted level-1v, -1f, and -3 amd kernels and inserted additional
comments.
- Updated LICENSE file to explicitly mention that parts are copyright
UT-Austin and AMD.
- Added AMD copyright to header templates in build/templates.
Summary of previous changes from 'amd' branch.
- Added s and d assembly-based zen gemm microkernels (d6x8 and d8x6) and
s and d assembly-based zen gemmtrsm_l microkernels (d6x8).
- Added s and d intrinsics-based zen kernels for amaxv, axpyv, dotv, dotxv,
and scalv, with extra-unrolling variants for axpyv and scalv.
- Added a small matrix handler to bli_gemm_front(), with the handler
implemented in kernels/zen/3/bli_gemm_small_matrix.c.
- Added additional logic to sumsqv that first attempts to compute the
sum of the squares via dotv(). If there is a floating-point exception
(FE_OVERFLOW), then the previous (numerically conservative) code is
used; otherwise, the result of dotv() is square-rooted and stored as
the result. This new implementation is only enabled when FE_OVERFLOW
is #defined. If the macro is not #defined, then the previous
implementation is used.
- Added axpyv and dotv standalone test drivers to test directory.
- Added zen support to old cpuid_x86.c driver in build/auto-detect/old.
- Added thread-local and __attribute__-related macros to bli_macro_defs.h.
Details:
- Fixed a makefile error encountered when building the testsuite directly
in its directory (as opposed to indirectly via 'make test'). The fix
involves introducing a new variable, BUILD_PATH, alongside the existing
DIST_PATH variable. By default, BUILD_PATH is set to the current
directory, and is overridden by other Makefiles used by, for example,
the testsuite and standalone test drivers in testsuite or test,
respectively.
- Some files/directories in common.mk were redefined in terms of
BUILD_DIR, such as the locations of config.mk file and the intermediate
include directory.
Details:
- Defined two new functions in bli_init.c: bli_init_once() and
bli_finalize_once(). Each is implemented with pthread_once(), which
guarantees that, among the threads that pass in the same pthread_once_t
data structure, exactly one thread will execute a user-defined function.
(Thus, there is now a runtime dependency against libpthread even when
multithreading is not enabled at configure-time.)
- Added calls to bli_init_once() to top-level user APIs for all
computational operations as well as many other functions in BLIS to
all but guarantee that BLIS will self-initialize through the normal
use of its functions.
- Rewrote and simplified bli_init() and bli_finalize() and related
functions.
- Added -lpthread to LDFLAGS in common.mk.
- Modified the bli_init_auto()/_finalize_auto() functions used by the
BLAS compatibility layer to take and return no arguments. (The
previous API that tracked whether BLIS was initialized, and then
only finalized if it was initialized in the same function, was too
cute by half and borderline useless because by default BLIS stays
initialized when auto-initialized via the compatibility layer.)
- Removed static variables that track initialization of the sub-APIs in
bli_const.c, bli_error.c, bli_init.c, bli_memsys.c, bli_thread, and
bli_ind.c. We don't need to track initialization at the sub-API level,
especially now that BLIS can self-initialize.
- Added a critical section around the changing of the error checking
level in bli_error.c.
- Deprecated bli_ind_oper_has_avail() as well as all functions
bli_<opname>_ind_get_avail(), where <opname> is a level-3 operation
name. These functions had no use cases within BLIS and likely none
outside of BLIS.
- Commented out calls to bli_init() and bli_finalize() in testsuite's
main() function, and likewise for standalone test drivers in 'test'
directory, so that self-initialization is exercised by default.
Details:
- Fixed semi-broken testsuite Makefile and very-broken test driver Makefiles,
as well as those for test/3m4m, test/thread_ranges, and test/exec_sizes
sub-directories.
- Factored out much of the top-level Makefile into common.mk. A Makefile
needs only set DIST_PATH to the relative path to the top level of the
BLIS source distribution before including common.mk in order to acquire
all of the definitions typically needed in a Makefile that tests BLIS.
Details:
- Commented out code in frame/ind/oapi/bli_l3_3m4m1m_oapi.c that was
specifically inserted to facilitate the benchmarking of 1m block-panel
and panel-block algorithms.
- Updates to test/3m4m/Makefile, runme.sh script, and test_gemm.c to
reflect changes used/needed during benchmarking.
Details:
- Implemented the 1m method for inducing complex domain matrix
multiplication. 1m support has been added to all level-3 operations,
including trsm, and is now the default induced method when native
complex domain gemm microkernels are omitted from the configuration.
- Updated _cntx_init() operations to take a datatype parameter. This was
needed for the corresponding function for 1m (because 1m requires us
to choose between column-oriented or row-oriented execution, which
requires us to query the context for the storage preference of the
gemm microkernel, which requires knowing the datatype) but I decided
that it made sense for consistency to add the parameter to all other
cntx initialization functions as well, even though those functions
don't use the parameter.
- Updated bli_cntx_set_blkszs() and bli_gks_cntx_set_blkszs() to take
a second scalar for each blocksize entry. The semantic meaning of the
two scalars now is that the first will scale the default blocksize
while the second will scale the maximum blocksize. This allows scaling
the two independently, and was needed to support 1m, which requires
scaling for a register blocksize but not the register storage
blocksize (ie: "packdim") analogue.
- Deprecated bli_blksz_reduce_dt_to() and defined two new functions,
bli_blksz_reduce_def_to() and bli_blksz_reduce_max_to(), for reducing
default and maximum blocksizes to some desired blocksize multiple.
These functions are needed in the updated definitions of
bli_cntx_set_blkszs() and bli_gks_cntx_set_blkszs().
- Added support for the 1e and 1r packing schemas to packm, including
1e/1r packing kernels.
- Added a minor optimization to bli_gemm_ker_var2() that allows, under
certain circumstances (specifically, real domain beta and row- or
column-stored matrix C), the real domain macrokernel and microkernel
to be called directly, rather than using the virtual microkernel
via the complex domain macrokernel, which carries a slight additional
amount of overhead.
- Added 1m support to the testsuite.
- Added 1m support to Makefile and runme.sh in test/3m4m. Also simplified
some code in test_gemm.c driver.
Details:
- Relaxed the base pointer and leading dimension alignment restrictions
in the sandybridge gemm microkernels, allowing the use of vmovups/vmovupd
instead of vmovaps/vmovapd. These change mimic those made to the haswell
microkernels in e0d2fa0 and ee2c139.
- Updated testsuite modules as well as standalone test drivers in 'test'
directory to use DBL_MAX as the initial time candidate. Thanks to Devin
Matthews for suggesting this change.
- Inserted #include "float.h" into bli_system.h (to gain access to DBL_MAX).
- Minor update (vis-a-vis contexts) to driver code in test/3m4m.
Details:
- Reorganized code and renamed files defining APIs related to multithreading.
All code that is not specific to a particular operation is now located in a
new directory: frame/thread. Code is now organized, roughly, by the
namespace to which it belongs (see below).
- Consolidated all operation-specific *_thrinfo_t object types into a single
thrinfo_t object type. Operation-specific level-3 *_thrinfo_t APIs were
also consolidated, leaving bli_l3_thrinfo_*() and bli_packm_thrinfo_*()
functions (aside from a few general purpose bli_thrinfo_*() functions).
- Renamed thread_comm_t object type to thrcomm_t.
- Renamed many of the routines and functions (and macros) for multithreading.
We now have the following API namespaces:
- bli_thrinfo_*(): functions related to thrinfo_t objects
- bli_thrcomm_*(): functions related to thrcomm_t objects.
- bli_thread_*(): general-purpose functions, such as initialization,
finalization, and computing ranges. (For now, some macros, such as
bli_thread_[io]broadcast() and bli_thread_[io]barrier() use the
bli_thread_ namespace prefix, even though bli_thrinfo_ may be more
appropriate.)
- Renamed thread-related macros so that they use a bli_ prefix.
- Renamed control tree-related macros so that they use a bli_ prefix (to be
consistent with the thread-related macros that were also renamed).
- Removed #undef BLIS_SIMD_ALIGN_SIZE from dunnington's bli_kernel.h. This
#undef was a temporary fix to some macro defaults which were being applied
in the wrong order, which was recently fixed.
Details:
- Added two new sets of [sd]gemm micro-kernels for haswell architectures,
one that is 4x24/4x12 (s and d) and one that is 6x16/6x8.
- Changed the haswell configuration to use the 6x16/6x8 micro-kernels
by default.
- Updated various Makefiles, in test, test/3m4m, and testsuite.
Details:
- Fixed typos in README.md.
- Fixed column heading alignment for testsuite when matlab output is
enabled.
- Minor updates to test/3m4m/runme.sh and test/3m4m/Makefile.
Details:
- Expanded/updated interface for bli_get_range_weighted() and
bli_get_range() so that the direction of movement is specified in the
function name (e.g. bli_get_range_l2r(), bli_get_range_weighted_t2b())
and also so that the object being partitioned is passed instead of an
uplo parameter. Updated invocations in level-3 blocked variants, as
appropriate.
- (Re)implemented bli_get_range_*() and bli_get_range_weighted_*() to
carefully take into account the location of the diagonal when computing
ranges so that the area of each subpartition (which, in all present
level-3 operations, is proportional to the amount of computation
engendered) is as equal as possible.
- Added calls to a new class of routines to all non-gemm level-3 blocked
variants:
bli_<oper>_prune_unref_mparts_[mnk]()
where <oper> is herk, trmm, or trsm and [mnk] is chosen based on which
dimension is being partitioned. These routines call a more basic
routine, bli_prune_unref_mparts(), to prune unreferenced/unstored
regions from matrices and simultaneously adjust other matrices which
share the same dimension accordingly.
- Simplified herk_blk_var2f, trmm_blk_var1f/b as a result of more the
new pruning routines.
- Fixed incorrect blocking factors passed into bli_get_range_*() in
bli_trsm_blk_var[12][fb].c
- Added a new test driver in test/thread_ranges that can exercise the new
bli_get_range_*() and bli_get_range_weighted_*() under a range of
conditions.
- Reimplemented m and n fields of obj_t as elements in a "dim"
array field so that dimensions could be queried via index constant
(e.g. BLIS_M, BLIS_N). Adjusted/added query and modification
macros accordingly.
- Defined mdim_t type to enumerate BLIS_M and BLIS_N indexing values.
- Added bli_round() macro, which calls C math library function round(),
and bli_round_to_mult(), which rounds a value to the nearest multiple
of some other value.
- Added miscellaneous pruning- and mdim_t-related macros.
- Renamed bli_obj_row_offset(), bli_obj_col_offset() macros to
bli_obj_row_off(), bli_obj_col_off().
Details:
- Updated test/3m4m driver files to build test drivers that allow
comparision of real "asm_blis" results to complex "asm_blis" results,
except with the latter's problem sizes adjusted so that problems are
generated with equal flop counts.
Details:
- Added a line of output that forces matlab to allocate the entire array
up-front.
- Re-enabled real domain benchmarks in runme.sh, which were temporarily
disabled.
Details:
- Fixed incorrect number of mc_x_kc memory blocks in
sandybridge/bli_config.h.
- Enabled OpenMP multithreding in piledriver/bli_config.h.
- More updates to test/3m4m driver files.
Details:
- Enable OpenMP support by default in sandybridge's bli_config.h.
- Reorganized sandybridge's bli_kernel.h.
- Updated 3m4m Makefile, runme.sh to also test MKL implementation.
Details:
- Defined a new "3ms" (separated 3m) pack schema and added appropriate
support in packm_init(), packm_blk_var2().
- Generalized packm_struc_cxk_3mi to take the imaginary stride (is_p)
as an argument instead of computing it locally. Exception: for trmm,
is_p must be computed locally, since it changes for triangular
packed matrices. Also exposed is_p in interface to dt-specific
packm_blk_var2 (and _var1, even though it does not use imaginary
stride).
- Renamed many functions/variables from _3mi to _3mis to indicate that
they work for either interleaved or separated 3m pack schemas.
- Generalized gemm and herk macro-kernels to pass in imaginary stride
rather than compute them locally.
- Added support for 3m2 and 3m3 algorithms to frame/ind, including 3m2-
and 3m3-specific virtual micro-kernels.
- Added special gemm macro-kernels to support 3m2 and 3m3.
- Added support for 3m2 and 3m3 to testsuite.
- Corrected the type of the panel dimension (pd_) in various macro-
kernels from inc_t to dim_t.
- Renamed many functions defined in bli_blocksize.c.
- Moved most induced-related macro defs from frame/include to
frame/ind/include.
- Updated the _ukernel.c files so that the micro-kernel function pointers
are obtained from the func_t objects rather than the cpp macros that
define the function names.
- Updated test/3m4m driver, Makefile, and run script.
Details:
- Renamed all remaining 3m/4m packing files and symbols to 3mi/4mi
('i' for "interleaved"). Similar changes to 3M/4M macros.
- Renamed all 3m/4m files and functions to 3m1/4m1.
- Whitespace changes.
Details:
- Changed gemm_kc blocksizes to be reduced by two-thirds instead of
half.
- Changed 3m4m/test_gemm.c driver to divide by 3 instead of 2 when
computing the fixed k dimension.
- Fixed runme.sh so that it would use multiple threads for s/dgemm
cases.
Details:
- Added a modified test driver for [cz]gemm that will test all 3m/4m
as well as assembly-based and OpenBLAS implementations of gemm
in single and multithreaded modes.
Details:
- Reverted some changes that were unintentionally included in the
previous commit (9526ce98). Thanks to Tony Kelman for pointing
this out. (Note: a few select changes were not reverted.)
Details:
- Updated herk_front() and her2k_front() to explicitly set the imaginary
components of the diagonal entries of C to zero after the computation
is complete. This is needed in case downstream applications read the
full diagonal entries (i.e., including imaginary part), which could, in
the absence of this modification, accumulate numerical error from
subsequent rank-k/rank-2k updates.
- Updated BLAS compatibility wrappers for herk and her2k to return early
if:
n == 0 || ( ( alpha == 0 || k == 0 ) && beta == 1 )
This also results in the imaginary components of diagonal entries NOT
being set to zero (see above), which is consistent with BLAS.
- Updated mkherm to use setid instead of an inlined loop over the
diagonal.
Details:
- Updated copyright headers to include "at Austin" in the name of the
University of Texas.
- Updated the copyright years of a few headers to 2014 (from 2011 and
2012).
Details:
- Changed level-2 _cntl.c files so that the blocksizes for gemv are
imported and used, rather than blocksizes being declared locally.
- Whitespace changes to gemv_cntl.c and gemm_cntl.c files (as well as
4m/3m variants).
- Removed test/old/test_blis2.c.
Details:
- Added the ability to induce complex domain level-3 operations via new
virtual complex micro-kernels which are implemented via only real
domain micro-kernels. Two new implementations are provided: 4m and 3m.
4m implements complex matrix multiplication in terms of four real
matrix multiplications, where as 3m uses only three and thus is
capable of even higher (than peak) performance. However, the 3m method
has somewhat weaker numerical properties, making it less desirable
in general.
- Further refined packing routines, which were recently revamped, and
added packing functionality for 4m and 3m.
- Some modifications to trmm and trsm macro-kernels to facilitate indexing
into micro-panels which were packed for 4m/3m virtual kernels.
- Added 4m and 3m interfaces for each level-3 operation.
- Various other minor changes to facilitate 4m/3m methods.
Details:
- Removed a_next and b_next arguments to micro-kernels and replaced them
with a pointer to a new datatype, auxinfo_t, which is simply a struct
that holds a_next and b_next. The struct may hold other auxiliary
information that may be useful to a micro-kernel, such as micro-panel
stride. Micro-kernels may access struct fields via accessor macros
defined in bli_auxinfo_macro_defs.h.
- Updated all instances of micro-kernel definitions, micro-kernel calls,
as well as macro-kernels (for declaring and initializing the structs)
according to above change.
Details:
- Fixed copy-and-paste bug whereby [scz]gemmtrsm_u_opt_d4x4 kernels
for x86_64/core2 were calling the wrong reference code (l instead
of u).
- Fixed some unused variables in x86_64/core2 dotaxpyv and dotxaxpyf
kernels.
- Minor typecasting fix in testsuite/src/test_libblis.c.
- Makefile updates.
Details:
- Updated Makefiles in test and testsuite directories to use the new
BLIS header installation directory scheme, which is to compile with
-I<PREFIX>/include/blis instead of -I<PREFIX>/include.
