mirror of
https://github.com/morrownr/8812au-20210820.git
synced 2026-10-15 05:52:01 +00:00
[GH-ISSUE #21] Any ideas on how to set the ibss mode? #19
Loading…
Add table
Add a link
Reference in a new issue
No description provided.
Delete branch "%!s()"
Deleting a branch is permanent. Although the deleted branch may continue to exist for a short time before it actually gets removed, it CANNOT be undone in most cases. Continue?
Originally created by @tallorate on GitHub (May 27, 2024).
Original GitHub issue: https://github.com/morrownr/8812au-20210820/issues/21
I've successfully installed the driver and it's okay running in AP and station mode. But when I trying to set the ibss mode, I can make two devices into the same cell.
root@cly-virtual-machine:/home/cly# iw dev wlan0 link
Joined IBSS 02:11:87:86:a3:0f (on wlan0)
SSID: myadhoc
freq: 2437
root@cly-virtual-machine:/home/cly# iwconfig wlan0
wlan0 IEEE 802.11bg ESSID:"myadhoc" Nickname:"WIFI@REALTEK"
Mode:Ad-Hoc Frequency:2.437 GHz Cell: 02:11:87:86:A3:0F
Sensitivity:0/0
Retry:off RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=1/100 Signal level=1/100 Noise level=0/100
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
but there are no packet exchanges at all and I even couldn't ping through each other.
@morrownr commented on GitHub (May 27, 2024):
@tallorate
I intended to mark ibss as untested but forgot to do so. All of the rest of the supported modes are tested.
To answer your question: I have no idea. I have never used that mode. If I had time, I would dig in and see what I could find out.
If you do figure it out, if it is working, let us know and I will post how to do it for those in the future.
@tallorate commented on GitHub (May 28, 2024):
Thanks to your reply.
Another question is that do you have any idea about the wds and mesh which are mentioned in the
corecode, I've also tried to set the interface into these modes but unfortunately they failed.