Compare commits

..

9 Commits

Author SHA1 Message Date
Marwan Mostafa
ee55ad6862 fix(website): hero slider only affects output when depth map wired
The slider's levels filter is conceptually depth-tied (it lives on
the green→depth path, and only the intermediate depth-map node uses
it). When canny is the sole input, dragging the slider was filtering
the canny edges in the output card, which read as a bug. Skip the
filter on the canny-only branch — the slider is now a no-op for the
final card unless depth is wired in.
2026-05-07 15:02:45 +03:00
Marwan Mostafa
424edb29d7 fix(website): hero green input desat only, drop card rim/shadow
The drop shadow needed an opaque rect that bled black through the
PNGs' transparent corners, and the hairline rim drew a visible outline
slightly off the baked corner radius. Both treatments looked worse
than no treatment, so this commit keeps only the part that worked:
the saturate(0.78) brightness(0.92) filter on the green input PNG so
it stops outshouting the final-output card.
2026-05-07 14:47:08 +03:00
Marwan Mostafa
52b2f1dd75 fix(website): dial back hero canvas motion + apply slider in single-input modes
Quieter visuals — the wire pulse, endpoint halos, and edge hover
highlight added too much yellow to the hero. The wires are now plain
beziers with small dots at each end; entry stagger and subtle parallax
remain.

Also fix: when only one of canny/depth is connected, the OUTPUT slider
had no effect on the final card — adjusting the slider only updated
the intermediate depth-map node, not the output preview. Apply the
existing levelsFilter to the single-input renders so the slider always
drives a visible change while a wire is attached.
2026-05-07 14:08:45 +03:00
Marwan Mostafa
2bdbf6d554 feat(website): refined edges with animated flow pulse
Polish the connection edges so they read as live data flow rather than
static lines:

- bezierHandles() computes control points proportional to horizontal
  distance with an 80-unit floor, so short hops (slider→depth) and long
  hops (canny→final) both bend with a consistent feel.
- Slightly thinner stroke (1.7 vs 2) and round caps.
- Endpoint dots shrunk to r=4 with a soft radial halo behind them so
  the connection points read as glowing slots rather than flat caps.
- Each connected edge gets a yellow pulse that travels source→target
  on a 4.5s loop, with fade-in/out at the ends so the dot doesn't pop.
  Driven from a 30 fps rAF loop that respects prefers-reduced-motion.
2026-05-07 13:38:34 +03:00
Marwan Mostafa
1ae7e61f01 feat(website): drag-to-rewire hero canvas connections
Replace the click-toggle on the canny/depth chips with a ComfyUI-style
drag UX. Pointer-down on either end of a togglable edge — the chip on
the final-output card or the output dot on canny / depth — anchors the
wire at that side and lets the cursor control the opposite end:

- Rip-off (was connected): the wire pivots from the grabbed slot, the
  loose end follows the cursor. Drop on a slot of the same edge to
  reconnect; drop anywhere else to disconnect.
- New connection (was disconnected): the grabbed slot stays anchored
  and the cursor sweeps toward the eventual partner. Drop on the
  matching slot to connect; drop in space cancels.
- A quick click without movement still toggles, as a fallback.

Visual cues so the slots read as interactive:
- Outer rings on every connection dot — yellow when active, dim when
  off, with a soft halo on hover that grows on the source side.
- Hairline rim and yellow halo on hovered chips so the input ports
  look like grab handles.
- The static edge for the dragged wire is hidden during drag and a
  dashed yellow ghost line takes over, snapping to solid when the
  cursor is over a valid same-edge drop target.
2026-05-07 13:23:51 +03:00
Marwan Mostafa
af86b56c77 feat(website): connectable hero canvas + L-to-R layout
- Tighten the cluster into a clean left-to-right flow: input on the
  left, canny+depth stacked in the middle column with the slider on the
  green→depth path, final output on the right. Re-tune CONTENT bounds
  for ~80 scene-units of breathing room around the cluster.

- Make the canny→output and depth→output connections interactive.
  Click the CANNY EDGE / DEPTH MAP chip on the final-output card to
  toggle that connection (the chip is exactly where the input slot
  lives, giving a generous click target). Cursor swaps to pointer over
  a chip; disconnected chips dim to warm-gray and their edge line is
  hidden.

- Output mode follows the connection state — both connected shows the
  composed final image (with the existing depth-blur scrubber), only
  canny shows the canny-edge view, only depth shows the depth-map
  view, neither shows an empty placeholder card.

- Keep the canvas wrapper at full bleed and lift just the BrandButton
  to z-20 so drag interactions span the entire hero.
2026-05-07 12:57:39 +03:00
Marwan Mostafa
7b45c93bb5 chore(website): remove unused useHeroLogo + three dep
The HeroCanvas component replaces the old logo image-sequence hero, so
useHeroLogo.ts and its three.js dependency are no longer referenced.
2026-05-06 22:42:09 +03:00
Marwan Mostafa
3492ee02d0 feat(website): add interactive home hero canvas
Replace the marketing hero's logo image sequence with an interactive
draggable-node canvas overlaying the headline copy.

- Add HeroCanvas.vue: hand-rolled <canvas> with five draggable node
  sprites (green/red/blue/purple/output-ui) and connecting edges,
  fit-to-content scaling via useResizeObserver, with starting positions
  shifted leftward in the scene.
- HeroSection.vue: drop useHeroLogo + logo image (replaced by canvas);
  layer the canvas as a z-10 overlay so drag interactions span the full
  hero, including over the text. Keep the BrandButton 'Run first
  workflow' CTA, with relative z-20 so it stays clickable above the
  canvas overlay.
- Add four hero node PNG sprites under public/images/hero/.
2026-05-06 22:40:18 +03:00
Marwan Mostafa
2c841b457f chore(deps): add @swc-node/register and @swc/core as devDeps
Nx warns 'Falling back to ts-node for local typescript execution' when
loading TS configs (eg playwright.config.ts via @nx/playwright/plugin),
and in some environments the ts-node fallback fails to load the configs
(plugin reports them as undefined). Adding the suggested @swc-node
loader resolves the fallback path and silences the warning.
2026-05-06 22:39:17 +03:00
773 changed files with 10769 additions and 64093 deletions

View File

@@ -1,173 +0,0 @@
---
name: add-model-page
description: 'add, update, or remove a model page entry on the comfy org website. creates a PR to Comfy-Org/ComfyUI_frontend apps/website folder with the change and posts a Vercel preview link back to Slack.'
---
# add-model-page
add, update, or remove model pages in the ComfyUI website.
## Trigger phrases
- `Add a model page for <model-name>`
- `Update the model page for <model-name>`
- `Remove <model-name> from model pages`
## Phase 1 — Parse the request
Extract:
- **action**: `add` | `update` | `remove`
- **model-name**: raw string (e.g. `flux1-schnell`, `flux1_dev.safetensors`)
Normalize to a slug: lowercase, replace `_` and `.` with `-`, strip file extensions.
Example: `flux1_dev.safetensors``flux1-dev`
## Architecture overview
Models come from two sources merged at build time:
| File | Purpose |
| ----------------------------------------------- | --------------------------------------------------------------------------------------------------------------------------------- |
| `apps/website/src/config/generated-models.json` | Auto-generated from workflow_templates (slug, name, directory, huggingFaceUrl, workflowCount, displayName, thumbnailUrl, docsUrl) |
| `apps/website/src/config/model-metadata.ts` | Hand-curated overrides (docsUrl, blogUrl, featured) — only add entries that need overrides |
| `apps/website/src/config/models.ts` | Merges the two above; exports typed `Model[]` |
To regenerate the JSON from workflow_templates:
```bash
pnpm tsx apps/website/scripts/generate-models.ts
```
This writes `apps/website/src/config/generated-models.json` directly.
Thumbnails are populated from local `.webp` files in `workflow_templates/templates/` — no network access needed.
---
## Phase 2 — Gather model data (ADD / UPDATE)
Run the generator to get fresh data, then find the model:
```bash
pnpm tsx apps/website/scripts/generate-models.ts
jq '.[] | select(.slug | contains("MODEL_SLUG"))' \
apps/website/src/config/generated-models.json
```
The JSON fields are:
- `slug` — URL slug
- `name` — exact filename or display name for partner nodes
- `huggingFaceUrl` — download URL (empty for partner nodes)
- `directory``diffusion_models` | `loras` | … | `partner_nodes`
- `workflowCount` — integer
- `displayName` — human-readable name
If no match and it is a known API/partner model, add it to `API_PROVIDER_MAP` in
`generate-models.ts` and re-run. Otherwise tell the user.
---
## Phase 3 — Check for existing entry
```bash
jq --arg slug "${SLUG}" '.[] | select(.slug == $slug)' \
apps/website/src/config/generated-models.json
```
- Match found + action is `add` → switch to UPDATE flow automatically
- No match + action is `update` → stop and tell the user
---
## Phase 4A — ADD: new partner/API model not in workflow_templates
For partner nodes (no local file), add an entry to `API_PROVIDER_MAP` in
`apps/website/scripts/generate-models.ts`:
```typescript
mymodel: { name: 'My Model', slug: 'my-model' },
```
Then re-run `pnpm tsx apps/website/scripts/generate-models.ts` — it will appear
in `generated-models.json` automatically.
If you also want a `docsUrl`, `blogUrl`, or a link to the hub model page, add an entry to `model-metadata.ts`:
```typescript
'my-model': {
docsUrl: 'https://docs.comfy.org/tutorials/...',
blogUrl: 'https://blog.comfy.org/...',
hubSlug: 'my-model', // slug at comfy.org/workflows/model/{hubSlug} — only set if the page exists (returns 200)
featured: true
}
```
No changes to `models.ts` or `translations.ts` are needed.
---
## Phase 4B — UPDATE: edit existing entry
Only `model-metadata.ts` needs editing for most updates (docsUrl, blogUrl,
featured). For `displayName` or `directory` changes, edit the entry directly in
`generated-models.json` (until the next generator run would overwrite it — then
fix the source in `generate-models.ts`).
---
## Phase 4C — REMOVE: delete entry
Remove the entry from `generated-models.json` (or mark it with `canonicalSlug`
pointing to the replacement). No translation file changes needed.
---
## Phase 5 — Verify TypeScript
```bash
pnpm typecheck 2>&1 | grep -E "error|warning" | head -20
```
Fix any type errors before proceeding. Common issues:
- `ModelDirectory` type not matching a new `directory` value — add it to the union
- JSON import shape mismatch — `generated-models.json` must match `OutputModel`
---
## Phase 6 — Create PR
```bash
BRANCH="add-model-page-MODEL-SLUG" # or update- / remove-
git checkout -b $BRANCH
git add apps/website/src/config/generated-models.json \
apps/website/scripts/generate-models.ts \
apps/website/src/config/model-metadata.ts
git commit -m "feat(models): add model page for MODEL-SLUG"
git push -u origin $BRANCH
gh pr create \
--title "Add model page: MODEL-SLUG" \
--body "$(cat <<'EOF'
Adds a new model page entry for MODEL-SLUG.
## Changes
- `generated-models.json`: regenerated with new entry (workflowCount N, directory DIRECTORY)
- `model-metadata.ts`: editorial overrides (docsUrl, featured) if needed
EOF
)"
```
For UPDATE use branch `update-model-page-MODEL-SLUG`.
For REMOVE use `remove-model-page-MODEL-SLUG`.
---
## Error states
| Situation | Response |
| ------------------------------- | ---------------------------------------------------------------- |
| Model not in workflow templates | Ask user to verify spelling or add it manually as a partner node |
| Slug already exists (add) | Switch to update flow automatically |
| Slug not found (update/remove) | Stop and ask user to confirm |
| Typecheck fails | Fix the error before pushing |

View File

@@ -19,26 +19,15 @@ reviews:
- name: End-to-end regression coverage for fixes
mode: error
instructions: |
Use only PR metadata already available in the review context:
- the PR title
- commit subjects in this PR
- The files changed in this PR relative to the PR base (equivalent to `base...head`)
- the PR description.
Do not rely on shell commands.
Do not inspect reverse diffs, files changed only on the base branch, or files outside this PR.
If the changed-file list or commit subjects are unavailable, mark the check inconclusive instead of guessing.
Use only PR metadata already available in the review context: the PR title, commit subjects in this PR, the files changed in this PR relative to the PR base (equivalent to `base...head`), and the PR description.
Do not rely on shell commands. Do not inspect reverse diffs, files changed only on the base branch, or files outside this PR. If the changed-file list or commit subjects are unavailable, mark the check inconclusive instead of guessing.
Fail if all of the following are true:
1. The PR title and/or any commit subject in the PR uses bug-fix language such as `fix`, `fixed`, `fixes`, `fixing`, `bugfix`, or `hotfix`.
2. The PR changes files under `src/` or `packages/` related to the main frontend application but the PR does not change at least one file under `browser_tests/`.
3. The PR description lacks a concrete explanation of why an end-to-end regression test was not added.
Do not fail if the changes are exclusively in `apps/website`, just documentation changes, or changes related to CI processes.
The goal is to make sure that fixes include End-to-End regression tests. Do not insist on tests when the PR is not fixing a bug.
Pass otherwise.
When failing, mention which bug-fix signal you found and ask the author to either add or update a Playwright regression test under `browser_tests/` or add a concrete explanation in the PR description of why an end-to-end regression test is not practical.
Pass if at least one of the following is true:
1. Neither the PR title nor any commit subject in the PR uses bug-fix language such as `fix`, `fixed`, `fixes`, `fixing`, `bugfix`, or `hotfix`.
2. The PR changes at least one file under `browser_tests/`.
3. The PR description includes a concrete, non-placeholder explanation of why an end-to-end regression test was not added.
Fail otherwise. When failing, mention which bug-fix signal you found and ask the author to either add or update a Playwright regression test under `browser_tests/` or add a concrete explanation in the PR description of why an end-to-end regression test is not practical.
- name: ADR compliance for entity/litegraph changes
mode: warning
instructions: |

View File

@@ -41,10 +41,6 @@ ALGOLIA_API_KEY=684d998c36b67a9a9fce8fc2d8860579
# Enable PostHog debug logging in the browser console.
# VITE_POSTHOG_DEBUG=true
# Override staging comfy-api / comfy-platform base URLs.
# VITE_STAGING_API_BASE_URL=https://stagingapi.comfy.org
# VITE_STAGING_PLATFORM_BASE_URL=https://stagingplatform.comfy.org
# Sentry ENV vars replace with real ones for debugging
# SENTRY_AUTH_TOKEN=private-token # get from sentry
# SENTRY_ORG=comfy-org

View File

@@ -1,19 +0,0 @@
name: Cloud Nodes Pull
description: 'Refresh the apps/website cloud nodes snapshot from the Comfy Cloud /api/object_info endpoint'
inputs:
api_key:
description: 'Comfy Cloud API key (WEBSITE_CLOUD_API_KEY).'
required: true
runs:
using: 'composite'
steps:
# Note: this action assumes the frontend repo is checked out at the workspace root.
- name: Setup frontend
uses: ./.github/actions/setup-frontend
- name: Refresh cloud nodes snapshot
shell: bash
env:
WEBSITE_CLOUD_API_KEY: ${{ inputs.api_key }}
run: pnpm --filter @comfyorg/website cloud-nodes:refresh-snapshot

View File

@@ -20,8 +20,6 @@ jobs:
github.event.workflow_run.conclusion == 'success'
runs-on: ubuntu-latest
timeout-minutes: 10
outputs:
has-coverage: ${{ steps.coverage-shards.outputs.has-coverage }}
steps:
- name: Checkout repository
@@ -39,33 +37,31 @@ jobs:
path: temp/coverage-shards
if_no_artifact_found: warn
- name: Detect shard coverage data
id: coverage-shards
run: |
if [ -d temp/coverage-shards ] && find temp/coverage-shards -name 'coverage.lcov' -type f | grep -q .; then
echo "has-coverage=true" >> "$GITHUB_OUTPUT"
else
echo "has-coverage=false" >> "$GITHUB_OUTPUT"
echo "No E2E coverage shard artifacts found; treating this run as skipped." >> "$GITHUB_STEP_SUMMARY"
fi
- name: Install lcov
if: steps.coverage-shards.outputs.has-coverage == 'true'
run: sudo apt-get install -y -qq lcov
- name: Merge shard coverage into single LCOV
if: steps.coverage-shards.outputs.has-coverage == 'true'
run: |
mkdir -p coverage/playwright
LCOV_FILES=$(find temp/coverage-shards -name 'coverage.lcov' -type f)
if [ -z "$LCOV_FILES" ]; then
echo "No coverage.lcov files found"
touch coverage/playwright/coverage.lcov
exit 0
fi
ADD_ARGS=""
for f in $LCOV_FILES; do ADD_ARGS="$ADD_ARGS -a $f"; done
lcov $ADD_ARGS -o coverage/playwright/coverage.lcov
wc -l coverage/playwright/coverage.lcov
- name: Validate merged coverage
if: steps.coverage-shards.outputs.has-coverage == 'true'
run: |
SHARD_COUNT=$(find temp/coverage-shards -name 'coverage.lcov' -type f | wc -l | tr -d ' ')
if [ "$SHARD_COUNT" -eq 0 ]; then
echo "::notice::No shard coverage files; upstream E2E was likely skipped."
exit 0
fi
MERGED_SF=$(grep -c '^SF:' coverage/playwright/coverage.lcov || echo 0)
MERGED_LH=$(awk -F: '/^LH:/{s+=$2}END{print s+0}' coverage/playwright/coverage.lcov)
MERGED_LF=$(awk -F: '/^LF:/{s+=$2}END{print s+0}' coverage/playwright/coverage.lcov)
@@ -86,7 +82,7 @@ jobs:
done
- name: Upload merged coverage data
if: steps.coverage-shards.outputs.has-coverage == 'true'
if: always()
uses: actions/upload-artifact@v6
with:
name: e2e-coverage
@@ -95,7 +91,7 @@ jobs:
if-no-files-found: warn
- name: Upload E2E coverage to Codecov
if: steps.coverage-shards.outputs.has-coverage == 'true'
if: always()
uses: codecov/codecov-action@1af58845a975a7985b0beb0cbe6fbbb71a41dbad # v5.5.3
with:
files: coverage/playwright/coverage.lcov
@@ -104,17 +100,20 @@ jobs:
fail_ci_if_error: false
- name: Generate HTML coverage report
if: steps.coverage-shards.outputs.has-coverage == 'true'
run: |
if [ ! -s coverage/playwright/coverage.lcov ]; then
echo "No coverage data; generating placeholder report."
mkdir -p coverage/html
echo '<html><body><h1>No E2E coverage data available for this run.</h1></body></html>' > coverage/html/index.html
exit 0
fi
genhtml coverage/playwright/coverage.lcov \
-o coverage/html \
--title "ComfyUI E2E Coverage" \
--no-function-coverage \
--precision 1 \
--ignore-errors source,unmapped
--precision 1
- name: Upload HTML report artifact
if: steps.coverage-shards.outputs.has-coverage == 'true'
uses: actions/upload-artifact@v6
with:
name: e2e-coverage-html
@@ -123,10 +122,7 @@ jobs:
deploy:
needs: merge
if: >
github.event.workflow_run.head_branch == 'main' &&
needs.merge.outputs.has-coverage == 'true' &&
github.event.workflow_run.event == 'push'
if: github.event.workflow_run.head_branch == 'main'
runs-on: ubuntu-latest
permissions:
pages: write

View File

@@ -45,8 +45,12 @@ jobs:
path: dist/
retention-days: 1
# Build cloud distribution for @cloud tagged tests
# NX_SKIP_NX_CACHE=true is required because `nx build` was already run
# for the OSS distribution above. Without skipping cache, Nx returns
# the cached OSS build since env vars aren't part of the cache key.
- name: Build cloud frontend
run: pnpm build:cloud
run: NX_SKIP_NX_CACHE=true pnpm build:cloud
- name: Upload cloud frontend
uses: actions/upload-artifact@v6

View File

@@ -58,7 +58,6 @@ jobs:
env:
WEBSITE_ASHBY_API_KEY: ${{ secrets.WEBSITE_ASHBY_API_KEY }}
WEBSITE_ASHBY_JOB_BOARD_NAME: ${{ secrets.WEBSITE_ASHBY_JOB_BOARD_NAME }}
WEBSITE_CLOUD_API_KEY: ${{ secrets.WEBSITE_CLOUD_API_KEY }}
run: vercel build
- name: Fetch head commit metadata
@@ -152,20 +151,10 @@ jobs:
- name: Pull Vercel environment information
run: vercel pull --yes --environment=production
- name: Verify WEBSITE_CLOUD_API_KEY is present for production build
env:
WEBSITE_CLOUD_API_KEY: ${{ secrets.WEBSITE_CLOUD_API_KEY }}
run: |
if [ -z "${WEBSITE_CLOUD_API_KEY:-}" ]; then
echo "::error title=Missing WEBSITE_CLOUD_API_KEY::Production builds require WEBSITE_CLOUD_API_KEY so /cloud/supported-nodes is generated from fresh Cloud API data. Add it as a GitHub Actions repo secret and to the Vercel project environment. See apps/website/README.md."
exit 1
fi
- name: Build project artifacts
env:
WEBSITE_ASHBY_API_KEY: ${{ secrets.WEBSITE_ASHBY_API_KEY }}
WEBSITE_ASHBY_JOB_BOARD_NAME: ${{ secrets.WEBSITE_ASHBY_JOB_BOARD_NAME }}
WEBSITE_CLOUD_API_KEY: ${{ secrets.WEBSITE_CLOUD_API_KEY }}
run: vercel build --prod
- name: Deploy project artifacts to Vercel

View File

@@ -1,123 +0,0 @@
name: Model Page Discovery
on:
schedule:
- cron: '0 9 * * 1'
workflow_dispatch:
jobs:
discover:
runs-on: ubuntu-latest
permissions:
contents: read
issues: write
steps:
- name: Fetch model labels from hub API
id: hub
shell: bash
run: |
set -euo pipefail
curl -fsSL 'https://comfy.org/api/hub/labels?type=model' -o hub-labels.json
echo "Fetched $(jq '.labels | length' hub-labels.json) model labels from hub"
- name: Checkout ComfyUI_frontend
uses: actions/checkout@v6
with:
sparse-checkout: apps/website/src/config/generated-models.json
- name: Compare against existing models
id: compare
shell: bash
run: |
set -euo pipefail
HUB_SLUGS=$(jq -r '[.labels[].name]' hub-labels.json)
EXISTING_SLUGS=$(node -e "
const fs = require('fs');
const models = JSON.parse(
fs.readFileSync(
'apps/website/src/config/generated-models.json',
'utf8'
)
);
console.log(JSON.stringify(models.map(m => m.slug)));
" 2>/dev/null || echo '[]')
ADDED_SLUGS=$(node -e "
const hub = $HUB_SLUGS;
const existing = new Set($EXISTING_SLUGS);
console.log(JSON.stringify(hub.filter(s => !existing.has(s))));
")
COUNT=$(node -e "console.log($ADDED_SLUGS.length)")
echo "new_count=$COUNT" >> \$GITHUB_OUTPUT
echo "new_slugs=$ADDED_SLUGS" >> \$GITHUB_OUTPUT
if [ "\$COUNT" -eq 0 ]; then
echo "No new models found."
else
echo "Found \$COUNT new model(s)"
fi
- name: Check for existing open discovery issue
id: existing_issue
if: steps.compare.outputs.new_count != '0'
env:
GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
shell: bash
run: |
COUNT=$(gh issue list \
--repo "$GITHUB_REPOSITORY" \
--state open \
--search 'in:title "New models detected"' \
--json number \
--jq 'length')
echo "open_count=$COUNT" >> $GITHUB_OUTPUT
- name: Open GitHub issue for new models
if: |
steps.compare.outputs.new_count != '0' &&
steps.existing_issue.outputs.open_count == '0'
env:
GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
NEW_SLUGS: ${{ steps.compare.outputs.new_slugs }}
NEW_COUNT: ${{ steps.compare.outputs.new_count }}
shell: bash
run: |
SLUG_LIST=$(node -e "
const slugs = $NEW_SLUGS;
console.log(slugs.map(s => '- \`' + s + '\`').join('\n'));
")
gh issue create \
--repo "$GITHUB_REPOSITORY" \
--title "New models detected — add to model pages" \
--body "## $NEW_COUNT new model(s) found in hub
The weekly model discovery scan found model labels on the hub not yet in
\`apps/website/src/config/generated-models.json\`.
### New slugs ($NEW_COUNT)
$SLUG_LIST
### Next steps
1. Review which of these warrant an SEO model page
2. For local models: run \`SKIP_THUMBNAILS=1 pnpm generate:models\` and commit the result
3. For partner/API models: add to \`API_PROVIDER_MAP\` in \`generate-models.ts\`, regenerate, commit
---
*Generated by the [model-page-discovery workflow](https://github.com/$GITHUB_REPOSITORY/actions/workflows/model-page-discovery.yaml)*"
- name: Skip — open issue already exists
if: |
steps.compare.outputs.new_count != '0' &&
steps.existing_issue.outputs.open_count != '0'
run: echo "An open discovery issue already exists — skipping creation."
- name: No new models found
if: steps.compare.outputs.new_count == '0'
run: echo "No new models found — nothing to do."

View File

@@ -39,7 +39,7 @@ jobs:
- name: Install dependencies for analysis tools
run: |
pnpm add -g typescript @vue/compiler-sfc
pnpm install -g typescript @vue/compiler-sfc
- name: Run Claude PR Review
uses: anthropics/claude-code-action@ff34ce0ff04a470bd3fa56c1ef391c8f1c19f8e9 # v1.0.38

View File

@@ -59,7 +59,7 @@ jobs:
pnpm zipdist ./dist ./dist-desktop.zip
# Default release artifact for core/PyPI.
pnpm build
NX_SKIP_NX_CACHE=true pnpm build
pnpm zipdist
- name: Upload dist artifact
uses: actions/upload-artifact@v6

View File

@@ -1,6 +1,6 @@
# Description: Manual workflow to refresh the apps/website Ashby roles and
# cloud nodes snapshots and open a PR. Merging the PR triggers the existing
# Vercel website production deploy via ci-vercel-website-preview.yaml.
# Description: Manual workflow to refresh the apps/website Ashby roles snapshot
# and open a PR. Merging the PR triggers the existing Vercel website production
# deploy via ci-vercel-website-preview.yaml.
name: 'Release: Website'
on:
@@ -11,7 +11,7 @@ concurrency:
cancel-in-progress: true
jobs:
refresh-snapshots:
refresh-snapshot:
if: github.repository == 'Comfy-Org/ComfyUI_frontend'
runs-on: ubuntu-latest
permissions:
@@ -31,39 +31,28 @@ jobs:
api_key: ${{ secrets.WEBSITE_ASHBY_API_KEY }}
job_board_name: ${{ secrets.WEBSITE_ASHBY_JOB_BOARD_NAME }}
- name: Refresh cloud nodes snapshot
uses: ./.github/actions/cloud-nodes-pull
with:
api_key: ${{ secrets.WEBSITE_CLOUD_API_KEY }}
- name: Create Pull Request
uses: peter-evans/create-pull-request@c0f553fe549906ede9cf27b5156039d195d2ece0 # v8.1.0
with:
token: ${{ secrets.PR_GH_TOKEN }}
commit-message: 'chore(website): refresh Ashby and cloud nodes snapshots'
title: 'chore(website): refresh Ashby and cloud nodes snapshots'
commit-message: 'chore(website): refresh Ashby roles snapshot'
title: 'chore(website): refresh Ashby roles snapshot'
body: |
Automated refresh of remote-data snapshots used by the website
build:
- `apps/website/src/data/ashby-roles.snapshot.json` — Ashby job
board API
- `apps/website/src/data/cloud-nodes.snapshot.json` — Comfy Cloud
`/api/object_info`
Automated refresh of `apps/website/src/data/ashby-roles.snapshot.json`
from the Ashby job board API.
**Flow:**
1. `Release: Website` workflow ran (manual trigger).
2. This PR opens with the regenerated snapshots.
2. This PR opens with the regenerated snapshot.
3. `CI: Vercel Website Preview` deploys a preview for review.
4. Merging to `main` triggers the production Vercel deploy.
The snapshot fallback in `apps/website/src/utils/ashby.ts` and
`apps/website/src/utils/cloudNodes.ts` remains intact: builds
without the respective API keys continue to use the committed
snapshot (with a warning annotation in CI).
The snapshot fallback in `apps/website/src/utils/ashby.ts` remains
intact: builds without `WEBSITE_ASHBY_API_KEY` continue to use the
committed snapshot.
Triggered by workflow run `${{ github.run_id }}`.
branch: chore/refresh-website-snapshots-${{ github.run_id }}
branch: chore/refresh-ashby-snapshot-${{ github.run_id }}
base: main
labels: |
Release:Website

View File

@@ -40,11 +40,11 @@ jobs:
- name: Install dependencies for analysis tools
run: |
# Check if packages are already available locally
if ! pnpm list -g typescript @vue/compiler-sfc >/dev/null 2>&1; then
if ! pnpm list typescript @vue/compiler-sfc >/dev/null 2>&1; then
echo "Installing TypeScript and Vue compiler globally..."
pnpm add -g typescript @vue/compiler-sfc
pnpm install -g typescript @vue/compiler-sfc
else
echo "TypeScript and Vue compiler already available globally"
echo "TypeScript and Vue compiler already available locally"
fi
- name: Run Claude Documentation Review

5
.gitignore vendored
View File

@@ -19,7 +19,6 @@ yarn.lock
node_modules
.pnpm-store
.nx
dist
dist-ssr
*.local
@@ -90,6 +89,10 @@ storybook-static
# MCP Servers
.playwright-mcp/*
.nx/cache
.nx/workspace-data
.cursor/rules/nx-rules.mdc
.github/instructions/nx.instructions.md
vite.config.*.timestamp*
vitest.config.*.timestamp*

3
.npmrc Normal file
View File

@@ -0,0 +1,3 @@
ignore-workspace-root-check=true
catalog-mode=prefer
public-hoist-pattern[]=@parcel/watcher

1
.nxignore Normal file
View File

@@ -0,0 +1 @@
.claude/worktrees

View File

@@ -2,6 +2,7 @@
"$schema": "./node_modules/oxlint/configuration_schema.json",
"ignorePatterns": [
".i18nrc.cjs",
".nx/*",
"**/vite.config.*.timestamp*",
"**/vitest.config.*.timestamp*",
"components.d.ts",
@@ -84,15 +85,6 @@
"typescript/no-unused-vars": "off",
"unicorn/no-empty-file": "off",
"vitest/require-mock-type-parameters": "off",
"vitest/consistent-each-for": [
"error",
{
"test": "for",
"it": "for",
"describe": "for",
"suite": "for"
}
],
"unicorn/no-new-array": "off",
"unicorn/no-single-promise-in-promise-methods": "off",
"unicorn/no-useless-fallback-in-spread": "off",

View File

@@ -35,7 +35,7 @@ See @docs/guidance/\*.md for file-type-specific conventions (auto-loaded by glob
## Monorepo Architecture
The project uses **pnpm workspaces** for monorepo organization and native tool CLIs for task execution
The project uses **Nx** for build orchestration and task management
## Package Manager
@@ -237,6 +237,7 @@ See @docs/testing/\*.md for detailed patterns.
- ComfyUI: <https://docs.comfy.org>
- Electron: <https://www.electronjs.org/docs/latest/>
- Wiki: <https://deepwiki.com/Comfy-Org/ComfyUI_frontend/1-overview>
- Nx: <https://nx.dev/docs/reference/nx-commands>
- [Practical Test Pyramid](https://martinfowler.com/articles/practical-test-pyramid.html)
## Architecture Decision Records

View File

@@ -7,7 +7,7 @@ This guide helps you resolve common issues when developing ComfyUI Frontend.
```mermaid
flowchart TD
A[Having Issues?] --> B{What's the problem?}
B -->|Dev server stuck| C[pnpm dev hangs]
B -->|Dev server stuck| C[nx serve hangs]
B -->|Build errors| D[Check build issues]
B -->|Lint errors| Q[Check linting issues]
B -->|Dependency issues| E[Package problems]
@@ -23,7 +23,7 @@ flowchart TD
G -->|No| H[Run: pnpm i]
G -->|Still stuck| I[Run: pnpm clean]
I --> J{Still stuck?}
J -->|Yes| K[Nuclear option:<br/>pnpm clean:all<br/>&& pnpm i]
J -->|Yes| K[Nuclear option:<br/>pnpm dlx rimraf node_modules<br/>&& pnpm i]
J -->|No| L[Fixed!]
H --> L
@@ -41,11 +41,11 @@ flowchart TD
### Development Server Issues
#### Q: `pnpm dev` gets stuck and won't start
#### Q: `pnpm dev` or `nx serve` gets stuck and won't start
**Symptoms:**
- Command hangs during Vite startup
- Command hangs on "nx serve"
- Dev server doesn't respond
- Terminal appears frozen
@@ -65,7 +65,7 @@ flowchart TD
3. **Last resort - Full node_modules reset:**
```bash
pnpm clean:all && pnpm i
pnpm dlx rimraf node_modules && pnpm i
```
**Why this happens:**
@@ -73,7 +73,7 @@ flowchart TD
- Corrupted dependency cache
- Outdated lock files after branch switching
- Incomplete previous installations
- stale local build cache
- NX cache corruption
---

View File

@@ -3,11 +3,8 @@
"version": "0.0.6",
"type": "module",
"scripts": {
"dev": "pnpm -w exec vite --config apps/desktop-ui/vite.config.mts",
"build": "pnpm -w exec vite build --config apps/desktop-ui/vite.config.mts",
"preview": "pnpm -w exec vite preview --config apps/desktop-ui/vite.config.mts",
"lint": "eslint src --cache",
"typecheck": "vue-tsc --noEmit -p tsconfig.json",
"lint": "nx run @comfyorg/desktop-ui:lint",
"typecheck": "nx run @comfyorg/desktop-ui:typecheck",
"test:unit": "vitest run --config vitest.config.mts",
"storybook": "storybook dev -p 6007",
"build-storybook": "storybook build -o dist/storybook"
@@ -36,5 +33,88 @@
"vite-plugin-html": "catalog:",
"vite-plugin-vue-devtools": "catalog:",
"vue-tsc": "catalog:"
},
"nx": {
"tags": [
"scope:desktop",
"type:app"
],
"targets": {
"dev": {
"executor": "nx:run-commands",
"continuous": true,
"options": {
"cwd": "apps/desktop-ui",
"command": "vite --config vite.config.mts"
}
},
"serve": {
"executor": "nx:run-commands",
"continuous": true,
"options": {
"cwd": "apps/desktop-ui",
"command": "vite --config vite.config.mts"
}
},
"build": {
"executor": "nx:run-commands",
"cache": true,
"dependsOn": [
"^build"
],
"options": {
"command": "vite build --config apps/desktop-ui/vite.config.mts"
},
"outputs": [
"{projectRoot}/dist"
]
},
"preview": {
"executor": "nx:run-commands",
"continuous": true,
"dependsOn": [
"build"
],
"options": {
"cwd": "apps/desktop-ui",
"command": "vite preview --config vite.config.mts"
}
},
"storybook": {
"executor": "nx:run-commands",
"continuous": true,
"options": {
"cwd": "apps/desktop-ui",
"command": "storybook dev -p 6007"
}
},
"build-storybook": {
"executor": "nx:run-commands",
"cache": true,
"options": {
"cwd": "apps/desktop-ui",
"command": "storybook build -o dist/storybook"
},
"outputs": [
"{projectRoot}/dist/storybook"
]
},
"lint": {
"executor": "nx:run-commands",
"cache": true,
"options": {
"cwd": "apps/desktop-ui",
"command": "eslint src --cache"
}
},
"typecheck": {
"executor": "nx:run-commands",
"cache": true,
"options": {
"cwd": "apps/desktop-ui",
"command": "vue-tsc --noEmit -p tsconfig.json"
}
}
}
}
}

View File

@@ -1,12 +1,12 @@
<template>
<tr
class="border-y border-solid border-neutral-700"
class="border-neutral-700 border-solid border-y"
:class="{
'opacity-50': runner.resolved,
'opacity-75': isLoading && runner.resolved
}"
>
<td class="w-16 text-center">
<td class="text-center w-16">
<TaskListStatusIcon :state="runner.state" :loading="isLoading" />
</td>
<td>
@@ -14,7 +14,7 @@
{{ task.name }}
</p>
<Button
class="mx-2 inline-block"
class="inline-block mx-2"
type="button"
:icon="PrimeIcons.INFO_CIRCLE"
severity="secondary"
@@ -22,11 +22,11 @@
@click="toggle"
/>
<Popover ref="infoPopover" class="m-1 block max-w-64 min-w-32">
<Popover ref="infoPopover" class="block m-1 max-w-64 min-w-32">
<span class="whitespace-pre-line">{{ task.description }}</span>
</Popover>
</td>
<td class="px-4 text-right">
<td class="text-right px-4">
<Button
:icon="task.button?.icon"
:label="task.button?.text"

View File

@@ -9,7 +9,6 @@ import en from '@frontend-locales/en/main.json' with { type: 'json' }
import enNodes from '@frontend-locales/en/nodeDefs.json' with { type: 'json' }
import enSettings from '@frontend-locales/en/settings.json' with { type: 'json' }
import { getDefaultLocale } from '@frontend-locales/localeConfig'
import { createI18n } from 'vue-i18n'
function buildLocale<
@@ -168,7 +167,7 @@ const messages: Record<string, LocaleMessages> = {
export const i18n = createI18n({
// Must set `false`, as Vue I18n Legacy API is for Vue 2
legacy: false,
locale: getDefaultLocale(),
locale: navigator.language.split('-')[0] || 'en',
fallbackLocale: 'en',
messages,
// Ignore warnings for locale options as each option is in its own language.

View File

@@ -113,50 +113,6 @@ git commit apps/website/src/data/ashby-roles.snapshot.json
The script exits non-zero on any non-fresh outcome so stale/empty
snapshots can't be accidentally committed.
## Cloud nodes integration
`/cloud/supported-nodes` (and `/zh-CN/`) lists custom-node packs preinstalled on Comfy Cloud, joined with public metadata from the [ComfyUI Custom Node Registry](https://registry.comfy.org) ([`api.comfy.org`](https://api.comfy.org)). See [`src/pages/cloud/supported-nodes/AGENTS.md`](src/pages/cloud/supported-nodes/AGENTS.md) for the build pipeline, source-file map, and key invariants.
Build-time env var: `WEBSITE_CLOUD_API_KEY` (Cloud `/api/object_info` auth; the build falls back to the committed snapshot when unset). Must also be set in the Vercel project environment.
### Production strictness
`src/utils/cloudNodes.build.ts` throws when `fetchCloudNodesForBuild()` returns
`{ status: 'stale' }` **and** `process.env.VERCEL_ENV === 'production'`. This
prevents the production deploy from silently shipping an out-of-date snapshot
when the Cloud API is unreachable or `WEBSITE_CLOUD_API_KEY` is missing. Preview
and local builds continue to use the committed snapshot with a warning
annotation.
### Required GitHub Actions / Vercel secrets
| Name | Where | Purpose |
| ----------------------- | ----------------------------------------------- | ---------------------------------------------------------------------- |
| `WEBSITE_CLOUD_API_KEY` | GitHub Actions repo secret + Vercel project env | Auth for Cloud `/api/object_info`. Required for fresh production data. |
The `Release: Website` workflow uses the GitHub Actions secret to regenerate
`apps/website/src/data/cloud-nodes.snapshot.json` via
`.github/actions/cloud-nodes-pull/action.yaml`. The Vercel environment value is
read at build time by `vercel build` in `ci-vercel-website-preview.yaml`; the
`deploy-production` job hard-fails before `vercel build --prod` if the secret
is missing.
### Refreshing the snapshot
To update the committed snapshot manually (e.g. after onboarding new packs
to Comfy Cloud):
```bash
WEBSITE_CLOUD_API_KEY=\
pnpm --filter @comfyorg/website cloud-nodes:refresh-snapshot
git commit apps/website/src/data/cloud-nodes.snapshot.json
```
The script exits non-zero on any non-fresh outcome so stale/empty snapshots
can't be accidentally committed. Otherwise the `Release: Website` GitHub
Actions workflow runs the same step on every manual dispatch and opens a PR
with the refreshed snapshot.
## HubSpot contact form
The contact page uses HubSpot's hosted form embed for the interest form:
@@ -190,4 +146,3 @@ renders the documented embed container.
- `pnpm test:unit` — Vitest unit tests
- `pnpm test:e2e` — Playwright E2E tests (requires `pnpm build` first)
- `pnpm ashby:refresh-snapshot` — refresh the committed careers snapshot
- `pnpm cloud-nodes:refresh-snapshot` — refresh the committed cloud nodes snapshot

View File

@@ -28,8 +28,7 @@ export default defineConfig({
'/cloud/enterprise-case-studies/comfyui-at-architectural-scale-how-moment-factory-reimagined-3d-projection-mapping':
'/customers/moment-factory/',
'/cloud/enterprise-case-studies/how-series-entertainment-rebuilt-game-and-video-production-with-comfyui':
'/customers/series-entertainment/',
'/zh-CN/terms-of-service': '/terms-of-service'
'/customers/series-entertainment/'
},
build: {
assets: '_website'

View File

@@ -23,50 +23,26 @@ test.describe('Careers page @smoke', () => {
expect(await roles.count()).toBeGreaterThan(0)
})
test('clicking a department button scrolls to and activates that section', async ({
page
}) => {
const rolesSection = page.getByTestId('careers-roles')
await rolesSection.scrollIntoViewIfNeeded()
await expect(rolesSection).toBeVisible()
const allCount = await page.getByTestId('careers-role-link').count()
const engineeringButton = page.getByRole('button', {
name: 'ENGINEERING',
exact: true
})
// RolesSection is hydrated via `client:visible`. Once the button responds
// to a click by flipping aria-pressed, Vue is hydrated and the rest of
// the locator logic is in effect.
await expect(async () => {
await engineeringButton.click()
await expect(engineeringButton).toHaveAttribute('aria-pressed', 'true', {
timeout: 1_000
})
}).toPass({ timeout: 10_000 })
const engineeringSection = page.locator('#careers-dept-engineering')
await expect(engineeringSection).toBeInViewport()
expect(await page.getByTestId('careers-role-link').count()).toBe(allCount)
})
})
test.describe('Careers page role links', () => {
test('each role links to the Ashby job description page, not the application form', async ({
page
}) => {
await page.goto('/careers')
test('each role links to jobs.ashbyhq.com', async ({ page }) => {
const roles = page.getByTestId('careers-role-link')
const count = await roles.count()
for (let i = 0; i < count; i++) {
const href = await roles.nth(i).getAttribute('href')
expect(href).toMatch(/^https:\/\/jobs\.ashbyhq\.com\//)
expect(href).not.toMatch(/\/application\/?$/)
}
})
test('ENGINEERING category filter narrows the role list', async ({
page
}) => {
const allCount = await page.getByTestId('careers-role-link').count()
await page.getByRole('button', { name: 'ENGINEERING', exact: true }).click()
const engineeringLocator = page.getByTestId('careers-role-link')
await expect(engineeringLocator.first()).toBeVisible()
const engineeringCount = await engineeringLocator.count()
expect(engineeringCount).toBeLessThanOrEqual(allCount)
expect(engineeringCount).toBeGreaterThan(0)
})
})
test.describe('Careers page (zh-CN) @smoke', () => {

View File

@@ -1,169 +0,0 @@
import { expect } from '@playwright/test'
import { test } from './fixtures/blockExternalMedia'
test.describe('Cloud nodes page @smoke', () => {
test.beforeEach(async ({ page }) => {
await page.goto('/cloud/supported-nodes')
})
test('has correct title', async ({ page }) => {
await expect(page).toHaveTitle(
'Custom-node packs on Comfy Cloud — supported by default'
)
})
test('renders at least one pack card', async ({ page }) => {
const cards = page.getByTestId('cloud-node-pack-card')
await expect(cards.first()).toBeVisible()
expect(await cards.count()).toBeGreaterThan(0)
})
test('search input filters cards down', async ({ page }) => {
const cards = page.getByTestId('cloud-node-pack-card')
const initialCount = await cards.count()
await page.getByTestId('cloud-nodes-search').fill('impact')
const filteredCards = page.getByTestId('cloud-node-pack-card')
await expect(filteredCards.first()).toBeVisible()
const filteredCount = await filteredCards.count()
expect(filteredCount).toBeGreaterThan(0)
expect(filteredCount).toBeLessThanOrEqual(initialCount)
})
test('renders banner image or fallback element', async ({ page }) => {
const banners = page.getByTestId('cloud-node-pack-banner')
await expect(banners.first()).toBeVisible()
})
test('opens pack detail page from first card', async ({ page }) => {
const firstCard = page.getByTestId('cloud-node-pack-card').first()
await expect(firstCard).toBeVisible()
await firstCard.locator('a').first().click()
await expect(page).toHaveURL(/\/cloud\/supported-nodes\/[a-z0-9-]+$/)
await expect(page.getByTestId('cloud-node-pack-detail')).toBeVisible()
})
test('direct pack detail route renders node entries', async ({ page }) => {
await page.goto('/cloud/supported-nodes/comfyui-impact-pack')
await expect(page.getByTestId('cloud-node-pack-detail')).toBeVisible()
await expect(
page.getByTestId('cloud-node-pack-detail-node').first()
).toBeVisible()
})
test('search with no matches shows empty state', async ({ page }) => {
await page
.getByTestId('cloud-nodes-search')
.fill('zzzz-this-pack-does-not-exist')
await expect(page.getByTestId('cloud-node-pack-card')).toHaveCount(0)
await expect(page.getByText('No matching packs')).toBeVisible()
})
test('clearing search restores the full list', async ({ page }) => {
const cards = page.getByTestId('cloud-node-pack-card')
const initialCount = await cards.count()
await page.getByTestId('cloud-nodes-search').fill('impact')
await expect(cards.first()).toBeVisible()
await page.getByTestId('cloud-nodes-search').fill('')
await expect(cards).toHaveCount(initialCount)
})
test('search matches against node display names, not just pack names', async ({
page
}) => {
await page.getByTestId('cloud-nodes-search').fill('FaceDetailer')
await expect(page.getByTestId('cloud-node-pack-card')).toHaveCount(1)
await expect(
page.getByTestId('cloud-node-pack-card-link').first()
).toContainText('Impact Pack')
})
test('switching sort to A → Z reorders cards alphabetically', async ({
page
}) => {
await page.locator('#cloud-nodes-sort').selectOption('az')
const firstName = await page
.getByTestId('cloud-node-pack-card-link')
.first()
.textContent()
expect(firstName?.trim().toLowerCase().charAt(0)).toMatch(/^[a-c]/)
})
test('list grid carries a localized aria-label', async ({ page }) => {
await expect(
page.getByRole('list', {
name: 'Custom-node packs supported on Comfy Cloud'
})
).toBeVisible()
})
test('clicking the back link returns to the index from a detail page', async ({
page
}) => {
await page.goto('/cloud/supported-nodes/comfyui-impact-pack')
await page.getByRole('link', { name: 'Back to all packs' }).click()
await expect(page).toHaveURL(/\/cloud\/supported-nodes\/?$/)
await expect(page.getByTestId('cloud-node-pack-card').first()).toBeVisible()
})
test('detail page renders publisher and external repo link', async ({
page
}) => {
await page.goto('/cloud/supported-nodes/comfyui-impact-pack')
const repoLink = page.getByRole('link', {
name: /github\.com\/ltdrdata\/ComfyUI-Impact-Pack/
})
await expect(repoLink).toBeVisible()
await expect(repoLink).toHaveAttribute('rel', /noopener/)
})
test('unknown pack slug 404s', async ({ page }) => {
const response = await page.goto(
'/cloud/supported-nodes/this-pack-does-not-exist'
)
expect(response?.status()).toBe(404)
})
test('JSON-LD ItemList is emitted on the index page', async ({ page }) => {
const jsonLd = page.locator('script[type="application/ld+json"]')
const ldBlocks = await jsonLd.allTextContents()
expect(ldBlocks.some((b) => b.includes('"@type":"ItemList"'))).toBeTruthy()
})
test('JSON-LD payload escapes <-sequences', async ({ page }) => {
const ldBlocks = await page
.locator('script[type="application/ld+json"]')
.allTextContents()
for (const block of ldBlocks) {
expect(block).not.toContain('</script')
}
})
})
test.describe('Cloud nodes page (zh-CN) @smoke', () => {
test('renders localized title and packs', async ({ page }) => {
await page.goto('/zh-CN/cloud/supported-nodes')
await expect(page).toHaveTitle('Comfy Cloud 自定义节点包合集——开箱即用')
await expect(page.getByTestId('cloud-node-pack-card').first()).toBeVisible()
await expect(
page.getByTestId('cloud-node-pack-banner').first()
).toBeVisible()
})
test('opens pack detail page from first card', async ({ page }) => {
await page.goto('/zh-CN/cloud/supported-nodes')
const firstCard = page.getByTestId('cloud-node-pack-card').first()
await expect(firstCard).toBeVisible()
await firstCard.locator('a').first().click()
await expect(page).toHaveURL(/\/zh-CN\/cloud\/supported-nodes\/[a-z0-9-]+$/)
await expect(page.getByTestId('cloud-node-pack-detail')).toBeVisible()
})
})

View File

@@ -1,61 +0,0 @@
import { expect } from '@playwright/test'
import { test } from './fixtures/blockExternalMedia'
const M4_PRO_14_INCH_VIEWPORT = { width: 2016, height: 1310 }
const LAST_SECTION_HASH = '#contact'
test.describe(
'ContentSection scroll-spy @smoke',
{
annotation: [
{
type: 'issue',
description:
'https://linear.app/comfyorg/issue/FE-604/bug-bottom-badge-not-activating-on-scroll-at-high-resolution-3024x1964'
},
{
type: 'environment',
description:
'14" MacBook M4 Pro logical viewport reported in FE-604; /privacy-policy reproduces because of its short trailing sections'
}
]
},
() => {
test.use({ viewport: M4_PRO_14_INCH_VIEWPORT })
test('activates the last badge when user scrolls to the bottom', async ({
page
}) => {
await page.goto('/privacy-policy')
const sidebarNav = page.getByRole('navigation', {
name: 'Category filter'
})
const badges = sidebarNav.getByRole('button')
const lastBadge = badges.last()
await expect(badges.first()).toHaveAttribute('aria-pressed', 'true')
await expect(lastBadge).toHaveAttribute('aria-pressed', 'false')
await page.evaluate(() =>
window.scrollTo(0, document.documentElement.scrollHeight)
)
await expect(lastBadge).toHaveAttribute('aria-pressed', 'true')
})
test('activates the last badge when page mounts already at the bottom via trailing hash', async ({
page
}) => {
await page.goto(`/privacy-policy${LAST_SECTION_HASH}`)
const sidebarNav = page.getByRole('navigation', {
name: 'Category filter'
})
const lastBadge = sidebarNav.getByRole('button').last()
await expect(lastBadge).toHaveAttribute('aria-pressed', 'true')
})
}
)

View File

@@ -1,33 +0,0 @@
import { expect } from '@playwright/test'
import { test } from './fixtures/blockExternalMedia'
test.describe('Customers @smoke', () => {
test.beforeEach(async ({ page }) => {
await page.goto('/customers')
})
test('hero image declares intrinsic dimensions so layout reserves space before load', async ({
page
}) => {
const heroImage = page.locator('img[alt="Comfy 3D logo"]')
await expect(heroImage).toBeVisible()
await expect(heroImage).toHaveAttribute('width', /^\d+$/)
await expect(heroImage).toHaveAttribute('height', /^\d+$/)
// Regression guard: an unloaded <img> without intrinsic dimensions
// collapses to ~0px, then jumps to its natural size on load and pushes
// the video below it. Reserved space must persist before bytes arrive.
const heightWhileUnloaded = await page.evaluate(() => {
const img = document.querySelector<HTMLImageElement>(
'img[alt="Comfy 3D logo"]'
)
if (!img) return null
img.removeAttribute('src')
return img.getBoundingClientRect().height
})
expect(heightWhileUnloaded).not.toBeNull()
expect(heightWhileUnloaded!).toBeGreaterThan(100)
})
})

View File

@@ -1,71 +1,27 @@
import { expect, test } from '@playwright/test'
import { demos, getNextDemo } from '../src/config/demos'
import { t } from '../src/i18n/translations'
const escapeRegExp = (value: string): string =>
value.replace(/[.*+?^${}()|[\]\\]/g, '\\$&')
test.describe('Demo pages @smoke', () => {
for (const demo of demos) {
const nextDemo = getNextDemo(demo.slug)
test('demo detail page renders hero and embed', async ({ page }) => {
await page.goto('/demos/image-to-video')
await expect(page.getByRole('heading', { level: 1 })).toBeVisible()
await expect(page.getByRole('heading', { level: 1 })).toContainText(
'Create a Video from an Image'
)
const iframe = page.locator('iframe[title*="Interactive demo"]')
await expect(iframe).toBeAttached()
})
test(`/demos/${demo.slug} renders hero, embed, transcript, and next-demo nav`, async ({
page
}) => {
await page.goto(`/demos/${demo.slug}`)
test('demo detail page has transcript section', async ({ page }) => {
await page.goto('/demos/image-to-video')
await expect(
page.getByRole('button', { name: /demo transcript/i })
).toBeVisible()
})
const heading = page.getByRole('heading', { level: 1 })
await expect(heading).toBeVisible()
await expect(heading).toContainText(t(demo.title, 'en'))
const ogImage = page.locator('head meta[property="og:image"]')
await expect(ogImage).toHaveAttribute(
'content',
new RegExp(`${escapeRegExp(demo.slug)}-og\\.png`)
)
const iframe = page.locator(
`iframe[title*="${t('demos.embed.label', 'en')}"]`
)
await expect(iframe).toBeAttached()
await expect(iframe).toHaveAttribute(
'src',
new RegExp(escapeRegExp(demo.arcadeId))
)
await expect(
page.getByRole('button', { name: /demo transcript/i })
).toBeVisible()
await expect(
page.getByText(t(nextDemo.title, 'en')).first()
).toBeVisible()
const nextThumb = page.locator(`img[src="${nextDemo.thumbnail}"]`).first()
await expect(nextThumb).toBeAttached()
await expect(nextThumb).toBeVisible()
const naturalWidth = await nextThumb.evaluate(
(img) => (img as HTMLImageElement).naturalWidth
)
expect(naturalWidth).toBeGreaterThan(1)
})
test(`/zh-CN/demos/${demo.slug} renders localized content`, async ({
page
}) => {
await page.goto(`/zh-CN/demos/${demo.slug}`)
await expect(page).toHaveURL(/\/zh-CN\/demos\//)
const heading = page.getByRole('heading', { level: 1 })
await expect(heading).toContainText(t(demo.title, 'zh-CN'))
await expect(heading).toContainText(/[\u4E00-\u9FFF]/)
await expect(
page.getByText(t(nextDemo.title, 'zh-CN')).first()
).toBeVisible()
})
}
test('demo detail page has next demo navigation', async ({ page }) => {
await page.goto('/demos/image-to-video')
await expect(page.getByText(/what's next/i)).toBeVisible()
})
test('demo library page renders', async ({ page }) => {
await page.goto('/demos')
@@ -76,4 +32,13 @@ test.describe('Demo pages @smoke', () => {
const response = await page.goto('/demos/nonexistent')
expect(response?.status()).toBe(404)
})
test('zh-CN demo page renders localized content', async ({ page }) => {
await page.goto('/zh-CN/demos/image-to-video')
await expect(page.getByRole('heading', { level: 1 })).toContainText(
'从图片创建视频'
)
const nextDemoLink = page.locator('a[href*="/zh-CN/demos/"]').first()
await expect(nextDemoLink).toBeAttached()
})
})

View File

@@ -1,56 +0,0 @@
import { expect } from '@playwright/test'
import { test } from './fixtures/blockExternalMedia'
test.describe('Pricing page @smoke', () => {
test.beforeEach(async ({ page }) => {
await page.goto('/cloud/pricing')
})
test('shows the three paid tiers and Enterprise', async ({ page }) => {
const pricingGrid = page
.locator('section', {
has: page.getByRole('heading', { name: /Pricing/i })
})
.locator('.lg\\:grid')
for (const label of ['STANDARD', 'CREATOR', 'PRO']) {
await expect(
pricingGrid.locator('span', { hasText: new RegExp(`^${label}$`) })
).toBeVisible()
}
await expect(
page.getByRole('heading', { name: /Looking for Enterprise Solutions/i })
).toBeVisible()
})
test('does not show the Free tier when SHOW_FREE_TIER is disabled', async ({
page
}) => {
const pricingGrid = page
.locator('section', {
has: page.getByRole('heading', { name: /Pricing/i })
})
.locator('.lg\\:grid')
await expect(
pricingGrid.locator('span', { hasText: /^FREE$/ })
).toHaveCount(0)
await expect(page.getByRole('link', { name: /^START FREE$/ })).toHaveCount(
0
)
await expect(page.getByText(/Everything in Free, plus:/i)).toHaveCount(0)
})
})
test.describe('Cloud pricing teaser @smoke', () => {
test('does not show the "Start free" tagline when SHOW_FREE_TIER is disabled', async ({
page
}) => {
await page.goto('/cloud')
await expect(
page.getByText(/Start free\.\s*Upgrade when you're ready\./i)
).toHaveCount(0)
})
})

View File

@@ -1,4 +1,3 @@
import type { Page } from '@playwright/test'
import { expect } from '@playwright/test'
import { test } from './fixtures/blockExternalMedia'
@@ -48,105 +47,4 @@ test.describe('Mobile layout @mobile', () => {
const mobileContainer = page.getByTestId('social-proof-mobile')
await expect(mobileContainer).toBeVisible()
})
test.describe('SocialProofBar seamless marquee', () => {
test.use({ contextOptions: { reducedMotion: 'no-preference' } })
test('mobile forward marquee loops seamlessly', async ({ page }) => {
const geometry = await measureMarqueeLoopGeometry(
page,
'[data-testid="social-proof-mobile"] .animate-marquee'
)
expectSeamlessForwardLoop(geometry)
})
test('mobile reverse marquee loops seamlessly', async ({ page }) => {
const geometry = await measureMarqueeLoopGeometry(
page,
'[data-testid="social-proof-mobile"] .animate-marquee-reverse'
)
expectSeamlessReverseLoop(geometry)
})
})
})
test.describe('Desktop SocialProofBar @smoke', () => {
test.use({ contextOptions: { reducedMotion: 'no-preference' } })
test.beforeEach(async ({ page }) => {
await page.goto('/')
})
test('desktop marquee loops seamlessly', async ({ page }) => {
const geometry = await measureMarqueeLoopGeometry(
page,
'[data-testid="social-proof-desktop"] .animate-marquee'
)
expectSeamlessForwardLoop(geometry)
})
})
type MarqueeGeometry = {
copyWidths: number[]
startPositions: number[]
endPositions: number[]
}
async function measureMarqueeLoopGeometry(
page: Page,
selector: string
): Promise<MarqueeGeometry> {
await page.locator(selector).first().waitFor()
return page.evaluate((sel) => {
const tracks = Array.from(
document.querySelectorAll<HTMLElement>(sel)
).slice(0, 2)
const firstAnimation = tracks[0]?.getAnimations()[0]
if (!firstAnimation) {
throw new Error(`No CSS animation found on ${sel}`)
}
const duration = firstAnimation.effect?.getTiming().duration
if (typeof duration !== 'number' || duration <= 1) {
throw new Error(
`Animation on ${sel} has unusable duration: ${String(duration)}`
)
}
const setAllTimes = (time: number) => {
for (const track of tracks) {
for (const anim of track.getAnimations()) {
anim.currentTime = time
}
}
void document.body.offsetWidth
}
const readX = () => tracks.map((track) => track.getBoundingClientRect().x)
setAllTimes(0)
const startPositions = readX()
const copyWidths = tracks.map(
(track) => track.getBoundingClientRect().width
)
setAllTimes(duration - 0.1)
const endPositions = readX()
return { copyWidths, startPositions, endPositions }
}, selector)
}
function expectTwoMatchingCopies(geometry: MarqueeGeometry) {
const { copyWidths } = geometry
expect(copyWidths.length, 'expected two duplicate marquee tracks').toBe(2)
expect(copyWidths[0]).toBeGreaterThan(0)
expect(copyWidths[1]).toBeCloseTo(copyWidths[0], 0)
}
function expectSeamlessForwardLoop(geometry: MarqueeGeometry) {
expectTwoMatchingCopies(geometry)
// Copy 2 ends the cycle exactly where copy 1 started, so the restart
// (when copy 1 jumps back to its start position) is visually indistinguishable.
expect(geometry.endPositions[1]).toBeCloseTo(geometry.startPositions[0], 0)
}
function expectSeamlessReverseLoop(geometry: MarqueeGeometry) {
expectTwoMatchingCopies(geometry)
// Reverse marquee: copy 1 ends the cycle where copy 2 started.
expect(geometry.endPositions[0]).toBeCloseTo(geometry.startPositions[1], 0)
}

View File

@@ -26,8 +26,8 @@ async function assertNoOverflow(page: Page) {
}
async function navigateAndSettle(page: Page, url: string) {
await page.goto(url, { waitUntil: 'domcontentloaded' })
await page.waitForLoadState('load')
await page.goto(url)
await page.waitForLoadState('networkidle')
}
test.describe('Home', { tag: '@visual' }, () => {

Binary file not shown.

Before

Width:  |  Height:  |  Size: 38 KiB

After

Width:  |  Height:  |  Size: 39 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 39 KiB

After

Width:  |  Height:  |  Size: 40 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 58 KiB

After

Width:  |  Height:  |  Size: 58 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 58 KiB

After

Width:  |  Height:  |  Size: 58 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 85 KiB

After

Width:  |  Height:  |  Size: 85 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 85 KiB

After

Width:  |  Height:  |  Size: 86 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 48 KiB

After

Width:  |  Height:  |  Size: 44 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 61 KiB

After

Width:  |  Height:  |  Size: 57 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 86 KiB

After

Width:  |  Height:  |  Size: 95 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 91 KiB

After

Width:  |  Height:  |  Size: 100 KiB

View File

@@ -15,15 +15,11 @@
"test:e2e:local": "cross-env PLAYWRIGHT_LOCAL=1 playwright test",
"test:visual": "playwright test --project visual",
"test:visual:update": "playwright test --project visual --update-snapshots",
"ashby:refresh-snapshot": "tsx ./scripts/refresh-ashby-snapshot.ts",
"cloud-nodes:refresh-snapshot": "tsx ./scripts/refresh-cloud-nodes-snapshot.ts",
"generate:models": "tsx ./scripts/generate-models.ts"
"ashby:refresh-snapshot": "tsx ./scripts/refresh-ashby-snapshot.ts"
},
"dependencies": {
"@astrojs/sitemap": "catalog:",
"@comfyorg/design-system": "workspace:*",
"@comfyorg/object-info-parser": "workspace:*",
"@comfyorg/shared-frontend-utils": "workspace:*",
"@comfyorg/tailwind-utils": "workspace:*",
"@vercel/analytics": "catalog:",
"@vueuse/core": "catalog:",
@@ -31,7 +27,6 @@
"gsap": "catalog:",
"lenis": "catalog:",
"posthog-js": "catalog:",
"three": "catalog:",
"vue": "catalog:",
"zod": "catalog:"
},
@@ -45,5 +40,88 @@
"tsx": "catalog:",
"typescript": "catalog:",
"vitest": "catalog:"
},
"nx": {
"tags": [
"scope:website",
"type:app"
],
"targets": {
"dev": {
"executor": "nx:run-commands",
"continuous": true,
"options": {
"cwd": "apps/website",
"command": "astro dev"
}
},
"serve": {
"executor": "nx:run-commands",
"continuous": true,
"options": {
"cwd": "apps/website",
"command": "astro dev"
}
},
"build": {
"executor": "nx:run-commands",
"cache": true,
"dependsOn": [
"^build"
],
"options": {
"cwd": "apps/website",
"command": "astro build"
},
"outputs": [
"{projectRoot}/dist"
]
},
"preview": {
"executor": "nx:run-commands",
"continuous": true,
"dependsOn": [
"build"
],
"options": {
"cwd": "apps/website",
"command": "astro preview"
}
},
"typecheck": {
"executor": "nx:run-commands",
"cache": true,
"options": {
"cwd": "apps/website",
"command": "astro check"
}
},
"test:unit": {
"executor": "nx:run-commands",
"cache": true,
"options": {
"cwd": "apps/website",
"command": "vitest run"
}
},
"test:coverage": {
"executor": "nx:run-commands",
"cache": true,
"options": {
"cwd": "apps/website",
"command": "vitest run --coverage"
}
},
"test:e2e": {
"executor": "nx:run-commands",
"dependsOn": [
"build"
],
"options": {
"cwd": "apps/website",
"command": "playwright test"
}
}
}
}
}

View File

@@ -28,7 +28,7 @@ export default defineConfig({
? [['html'], ['json', { outputFile: 'results.json' }]]
: 'html',
expect: {
toHaveScreenshot: { maxDiffPixels: 100 }
toHaveScreenshot: { maxDiffPixels: 50 }
},
...maybeLocalOptions,
webServer: {

Binary file not shown.

Before

Width:  |  Height:  |  Size: 3.2 KiB

File diff suppressed because one or more lines are too long

Before

Width:  |  Height:  |  Size: 81 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 17 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 1.0 KiB

View File

@@ -1,14 +0,0 @@
<svg width="48" height="48" viewBox="0 0 48 48" xmlns="http://www.w3.org/2000/svg">
<style>
.bg { fill: #000000; }
.fg { fill: #F2FF59; }
@media (prefers-color-scheme: dark) {
.bg { fill: #F2FF59; }
.fg { fill: #000000; }
}
</style>
<circle class="bg" cx="24" cy="24" r="24"/>
<g transform="translate(7.8 6.72) scale(0.72)">
<path class="fg" d="M35.6487 36.021C35.733 35.7387 35.7791 35.4411 35.7791 35.1283C35.7791 33.3963 34.3675 31.9924 32.6262 31.9924H18.4956C17.7361 32 17.1147 31.3896 17.1147 30.6342C17.1147 30.4969 17.1377 30.3672 17.1684 30.2451L20.9734 17.0606C21.1345 16.4807 21.6715 16.0534 22.3005 16.0534L36.4848 16.0382C39.4766 16.0382 42.0005 14.0315 42.76 11.2923L44.8926 3.94468C44.9616 3.68526 45 3.40296 45 3.12065C45 1.39628 43.5961 0 41.8624 0L24.7017 0C21.7252 0 19.209 1.99142 18.4342 4.70005L16.992 9.71292C16.8232 10.2852 16.2939 10.7048 15.6648 10.7048H11.5453C8.59189 10.7048 6.0987 12.6581 5.30089 15.3362L0.11507 33.3505C0.0383566 33.6175 0 33.9075 0 34.1974C0 35.9294 1.41152 37.3333 3.15292 37.3333H7.20338C7.96284 37.3333 8.58421 37.9437 8.58421 38.7067C8.58421 38.8364 8.56887 38.9661 8.53051 39.0882L7.09598 44.0553C7.02694 44.3224 6.98091 44.597 6.98091 44.8794C6.98091 46.6037 8.38476 48 10.1185 48L27.2869 47.9847C30.2711 47.9847 32.7873 45.9857 33.5544 43.2618L35.641 36.0286L35.6487 36.021Z"/>
</g>
</svg>

Before

Width:  |  Height:  |  Size: 1.4 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 270 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 36 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 119 KiB

After

Width:  |  Height:  |  Size: 69 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 20 KiB

After

Width:  |  Height:  |  Size: 69 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 119 KiB

After

Width:  |  Height:  |  Size: 69 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 20 KiB

After

Width:  |  Height:  |  Size: 69 B

Binary file not shown.

After

Width:  |  Height:  |  Size: 46 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 75 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 567 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 79 KiB

View File

@@ -1,396 +0,0 @@
import { existsSync, readdirSync, readFileSync, writeFileSync } from 'node:fs'
import { join } from 'node:path'
import { fileURLToPath } from 'node:url'
const WORKFLOW_TEMPLATES_BASE =
'https://raw.githubusercontent.com/Comfy-Org/workflow_templates/main/templates'
const TEMPLATES_DIR = fileURLToPath(
new URL('../../../../workflow_templates/templates', import.meta.url)
)
const QUANT_SUFFIXES = [
'_fp8_e4m3fn_scaled',
'_fp8_e4m3fn',
'_fp8_scaled',
'_fp4_mixed',
'_fp8mixed',
'_fp8',
'_fp16',
'_fp4',
'_bf16',
'_int8'
]
interface RawModel {
name: string
url: string
directory: string
}
interface ModelData {
url: string
directory: string
templates: Set<string>
firstTemplate?: string
}
interface OutputModel {
slug: string
name: string
huggingFaceUrl: string
directory: string
workflowCount: number
displayName: string
docsUrl?: string
thumbnailUrl?: string
canonicalSlug?: string
}
// Maps api_*.json filename prefix to a canonical display name and slug.
// Add entries here as new partner integrations land in workflow_templates.
const API_PROVIDER_MAP: Record<string, { name: string; slug: string }> = {
nano: { name: 'Nano Banana', slug: 'nano-banana' },
kling: { name: 'Kling AI', slug: 'kling-ai' },
kling2: { name: 'Kling AI', slug: 'kling-ai' },
meshy: { name: 'Meshy AI', slug: 'meshy-ai' },
luma: { name: 'Luma Dream Machine', slug: 'luma-dream-machine' },
runway: { name: 'Runway', slug: 'runway' },
vidu: { name: 'Vidu', slug: 'vidu' },
bfl: { name: 'Flux (API)', slug: 'flux-api' },
grok: { name: 'Grok Image', slug: 'grok-image' },
stability: { name: 'Stability AI', slug: 'stability-ai' },
bytedance: { name: 'Seedance (ByteDance)', slug: 'seedance-bytedance' },
bytedace: { name: 'Seedance (ByteDance)', slug: 'seedance-bytedance' },
google: { name: 'Gemini Image', slug: 'gemini-image' },
hailuo: { name: 'Hailuo MiniMax', slug: 'hailuo-minimax' },
ideogram: { name: 'Ideogram', slug: 'ideogram' },
pixverse: { name: 'Pixverse', slug: 'pixverse' },
rodin: { name: 'Rodin 3D', slug: 'rodin-3d' },
magnific: { name: 'Magnific AI', slug: 'magnific-ai' },
bria: { name: 'Bria AI', slug: 'bria-ai' },
tripo: { name: 'Tripo 3D', slug: 'tripo-3d' },
tripo3: { name: 'Tripo 3D', slug: 'tripo-3d' },
hunyuan3d: { name: 'Hunyuan 3D', slug: 'hunyuan-3d' },
recraft: { name: 'Recraft', slug: 'recraft' },
topaz: { name: 'Topaz Labs', slug: 'topaz-labs' },
moonvalley: { name: 'Moonvalley', slug: 'moonvalley' },
ltxv: { name: 'LTX Video (API)', slug: 'ltxv-api' },
openai: { name: 'OpenAI DALL-E', slug: 'openai-dall-e' },
wan: { name: 'Wan (API)', slug: 'wan-api' },
wan2: { name: 'Wan (API)', slug: 'wan-api' },
veo2: { name: 'Veo 2', slug: 'veo-2' },
veo3: { name: 'Veo 3', slug: 'veo-3' },
flux2: { name: 'Flux 2 (API)', slug: 'flux-2-api' },
wavespeed: { name: 'Wavespeed', slug: 'wavespeed' },
wavespped: { name: 'Wavespeed', slug: 'wavespeed' }
}
function stripExt(name: string): string {
return name.replace(/\.(safetensors|ckpt|pt|bin)$/, '')
}
function stripQuant(base: string): string {
for (const suffix of QUANT_SUFFIXES) {
if (base.endsWith(suffix)) return base.slice(0, -suffix.length)
}
return base
}
function makeSlug(name: string): string {
const base = stripExt(name)
return base
.toLowerCase()
.replace(/[_.]/g, '-')
.replace(/-+/g, '-')
.replace(/^-|-$/g, '')
}
function makeDisplayName(name: string): string {
const base = stripExt(name)
return base
.split(/[_-]/)
.map((part) => {
if (/^(fp\d+|bf\d+|int\d+)$/i.test(part)) return part.toUpperCase()
if (/^(e4m3fn|scaled|mixed|fp8mixed)$/i.test(part)) return part
if (/^\d+(\.\d+)?[bBkKmM]?$/.test(part)) return part
return part.charAt(0).toUpperCase() + part.slice(1)
})
.join(' ')
}
function extractModels(
obj: unknown,
templateName: string,
models: Map<string, ModelData>
): void {
if (obj === null || typeof obj !== 'object') return
if (Array.isArray(obj)) {
for (const item of obj) extractModels(item, templateName, models)
return
}
const record = obj as Record<string, unknown>
if (Array.isArray(record['models'])) {
for (const m of record['models'] as unknown[]) {
if (m === null || typeof m !== 'object' || Array.isArray(m)) continue
const model = m as Record<string, unknown>
if (typeof model['name'] !== 'string') continue
const name = model['name']
const url = typeof model['url'] === 'string' ? model['url'] : ''
const directory =
typeof model['directory'] === 'string' ? model['directory'] : ''
if (!models.has(name)) {
models.set(name, {
url,
directory,
templates: new Set(),
firstTemplate: templateName
})
}
models.get(name)!.templates.add(templateName)
}
}
for (const value of Object.values(record)) {
extractModels(value, templateName, models)
}
}
interface ApiModelData {
slug: string
name: string
directory: 'partner_nodes'
templateCount: number
}
function extractApiModels(files: string[]): ApiModelData[] {
const counts = new Map<string, number>()
for (const file of files) {
if (!file.startsWith('api_')) continue
const prefix = file.slice(4).split('_')[0]
const entry = API_PROVIDER_MAP[prefix]
if (!entry) continue
counts.set(entry.slug, (counts.get(entry.slug) ?? 0) + 1)
}
return [...counts.entries()].map(([slug, count]) => {
const found = Object.values(API_PROVIDER_MAP).find((e) => e.slug === slug)!
return {
slug,
name: found.name,
directory: 'partner_nodes' as const,
templateCount: count
}
})
}
// Reads all locale index.json files to build a map of
// raw model filename → tutorialUrl. Index entries name the template file;
// that file's embedded model objects give the actual filenames.
function buildTutorialUrlMap(templatesDir: string): Map<string, string> {
const map = new Map<string, string>()
const indexFiles = readdirSync(templatesDir).filter(
(f) =>
f.startsWith('index') &&
f.endsWith('.json') &&
!f.includes('schema') &&
!f.includes('logo')
)
// Collect template-name → tutorialUrl from all locale indexes (first wins)
const templateTutorialMap = new Map<string, string>()
const sorted = ['index.json', ...indexFiles.filter((f) => f !== 'index.json')]
for (const file of sorted) {
let data: unknown
try {
data = JSON.parse(readFileSync(join(templatesDir, file), 'utf8'))
} catch {
continue
}
if (!Array.isArray(data)) continue
for (const cat of data as unknown[]) {
if (typeof cat !== 'object' || cat === null) continue
const templates = (cat as Record<string, unknown>)['templates']
if (!Array.isArray(templates)) continue
for (const t of templates) {
if (typeof t !== 'object' || t === null) continue
const entry = t as Record<string, unknown>
const tutorialUrl =
typeof entry['tutorialUrl'] === 'string'
? entry['tutorialUrl']
: undefined
const templateName =
typeof entry['name'] === 'string' ? entry['name'] : undefined
if (
tutorialUrl &&
templateName &&
!templateTutorialMap.has(templateName)
) {
templateTutorialMap.set(templateName, tutorialUrl)
}
}
}
}
// For each template with a tutorialUrl, open the template file and map
// every embedded model filename to that tutorialUrl
for (const [templateName, tutorialUrl] of templateTutorialMap) {
const filePath = join(templatesDir, `${templateName}.json`)
let data: unknown
try {
data = JSON.parse(readFileSync(filePath, 'utf8'))
} catch {
continue
}
function extractModelNames(obj: unknown): void {
if (obj === null || typeof obj !== 'object') return
if (Array.isArray(obj)) {
for (const item of obj) extractModelNames(item)
return
}
const record = obj as Record<string, unknown>
if (Array.isArray(record['models'])) {
for (const m of record['models'] as unknown[]) {
if (m === null || typeof m !== 'object' || Array.isArray(m)) continue
const model = m as Record<string, unknown>
if (typeof model['name'] === 'string' && !map.has(model['name'])) {
map.set(model['name'], tutorialUrl)
}
}
}
for (const value of Object.values(record)) {
extractModelNames(value)
}
}
extractModelNames(data)
}
return map
}
function templateThumbnailUrl(
firstTemplate: string | undefined,
templatesDir: string
): string | undefined {
if (!firstTemplate) return undefined
const base = firstTemplate.replace(/\.json$/, '')
const localPath = join(templatesDir, `${base}-1.webp`)
if (!existsSync(localPath)) return undefined
return `${WORKFLOW_TEMPLATES_BASE}/${encodeURIComponent(base)}-1.webp`
}
function run(): void {
const models = new Map<string, ModelData>()
const files = readdirSync(TEMPLATES_DIR).filter((f) => f.endsWith('.json'))
for (const file of files) {
const filePath = join(TEMPLATES_DIR, file)
try {
const raw = readFileSync(filePath, 'utf8')
const data: unknown = JSON.parse(raw)
extractModels(data, file, models)
} catch (error) {
throw new Error(
`Failed to parse ${file}: ${
error instanceof Error ? error.message : String(error)
}`
)
}
}
const apiModels = extractApiModels(files)
const tutorialUrlMap = buildTutorialUrlMap(TEMPLATES_DIR)
const sorted = [...models.entries()].sort(
([, a], [, b]) => b.templates.size - a.templates.size
)
// Build quant convergence map
const groups = new Map<string, Array<[string, ModelData]>>()
for (const [name, data] of sorted) {
const base = stripExt(name)
const canonicalBase = stripQuant(base)
if (!groups.has(canonicalBase)) groups.set(canonicalBase, [])
groups.get(canonicalBase)!.push([name, data])
}
const canonicalMap = new Map<string, string | null>()
for (const members of groups.values()) {
if (members.length > 1) {
const membersSorted = [...members].sort(
([, a], [, b]) => b.templates.size - a.templates.size
)
const canonicalName = membersSorted[0][0]
canonicalMap.set(canonicalName, null)
for (const [name] of membersSorted.slice(1)) {
canonicalMap.set(name, canonicalName)
}
} else {
canonicalMap.set(members[0][0], null)
}
}
const output: OutputModel[] = sorted.map(([name, data]) => {
const canonicalRaw = canonicalMap.get(name) ?? null
const result: OutputModel = {
slug: makeSlug(name),
name,
huggingFaceUrl: data.url,
directory: data.directory,
workflowCount: data.templates.size,
displayName: makeDisplayName(name)
}
const docsUrl = tutorialUrlMap.get(name)
if (docsUrl) result.docsUrl = docsUrl
const thumb = templateThumbnailUrl(data.firstTemplate, TEMPLATES_DIR)
if (thumb) result.thumbnailUrl = thumb
if (canonicalRaw !== null) {
result.canonicalSlug = makeSlug(canonicalRaw)
}
return result
})
const apiOutput: OutputModel[] = apiModels
.sort((a, b) => b.templateCount - a.templateCount)
.map((m) => ({
slug: m.slug,
name: m.name,
huggingFaceUrl: '',
directory: m.directory,
workflowCount: m.templateCount,
displayName: m.name
}))
const combined = [...apiOutput, ...output]
const withThumbs = combined.filter((m) => m.thumbnailUrl).length
process.stdout.write(
` ${withThumbs}/${combined.length} models have thumbnails\n`
)
const defaultOut = join(
fileURLToPath(new URL('.', import.meta.url)),
'../src/config/generated-models.json'
)
const outputArg = process.argv[2] ?? defaultOut
const json = JSON.stringify(combined, null, 2) + '\n'
writeFileSync(outputArg, json, 'utf8')
process.stdout.write(
`Written ${combined.length} models ` +
`(${apiOutput.length} partner, ${output.length} local) to ${outputArg}\n`
)
}
try {
run()
} catch (err) {
process.stderr.write(`${err instanceof Error ? err.message : String(err)}\n`)
process.exit(1)
}

View File

@@ -1,32 +0,0 @@
import { renameSync, writeFileSync } from 'node:fs'
import { fileURLToPath } from 'node:url'
import { fetchCloudNodesForBuild } from '../src/utils/cloudNodes'
const snapshotPath = fileURLToPath(
new URL('../src/data/cloud-nodes.snapshot.json', import.meta.url)
)
const tempPath = `${snapshotPath}.tmp`
const outcome = await fetchCloudNodesForBuild()
if (outcome.status !== 'fresh') {
const reason = 'reason' in outcome ? outcome.reason : '(none)'
console.error(
`Snapshot refresh aborted. Outcome: ${outcome.status}; reason: ${reason}`
)
process.exit(1)
}
const serialized = JSON.stringify(outcome.snapshot, null, 2) + '\n'
writeFileSync(tempPath, serialized, 'utf8')
renameSync(tempPath, snapshotPath)
const totalNodes = outcome.snapshot.packs.reduce(
(n, pack) => n + pack.nodes.length,
0
)
process.stdout.write(
`Wrote snapshot with ${outcome.snapshot.packs.length} pack(s) and ${totalNodes} node(s) to ${snapshotPath}\n`
)

View File

@@ -10,7 +10,7 @@ const { locale = 'en' } = defineProps<{ locale?: Locale }>()
</script>
<template>
<section class="max-w-9xl mx-auto px-6 py-24 lg:px-20 lg:py-32">
<section class="px-6 py-24 lg:px-20 lg:py-32">
<GlassCard
class="mx-auto mt-20 flex flex-col gap-12 lg:flex-row lg:items-stretch lg:gap-8"
>

View File

@@ -74,7 +74,7 @@ useHeroAnimation({
</div>
<!-- Video -->
<div ref="videoRef" class="max-w-9xl mx-auto px-4 pb-20 lg:px-20 lg:pb-40">
<div ref="videoRef" class="px-4 pb-20 lg:px-20 lg:pb-40">
<VideoPlayer
src="https://media.comfy.org/website/about/co-founders.webm"
poster="https://media.comfy.org/website/about/co-founders-poster.webp"

View File

@@ -33,7 +33,7 @@ const values: {
</script>
<template>
<section class="max-w-9xl mx-auto px-6 py-24 lg:px-20 lg:py-32">
<section class="px-6 py-24 lg:px-20 lg:py-32">
<div class="mx-auto max-w-5xl text-center">
<SectionLabel>
{{ t('about.values.label', locale) }}

View File

@@ -16,7 +16,7 @@ const investors = [
</script>
<template>
<section class="max-w-9xl mx-auto px-6 py-24 lg:px-20 lg:py-32">
<section class="px-6 py-24 lg:px-20 lg:py-32">
<div class="mx-auto text-center">
<span
class="text-primary-comfy-yellow text-xs font-semibold tracking-widest uppercase"

View File

@@ -14,7 +14,7 @@ const reasons: TranslationKey[] = [
</script>
<template>
<section class="max-w-9xl mx-auto px-6 py-24 lg:px-20 lg:py-32">
<section class="px-6 py-24 lg:px-20 lg:py-32">
<WireNodeLayout :reasons right-card-padding="p-6" :locale="locale">
<template #right-card>
<img

View File

@@ -1,13 +1,10 @@
<script setup lang="ts">
import { useEventListener, useTemplateRefsList } from '@vueuse/core'
import { computed, onMounted, ref } from 'vue'
import { computed, ref } from 'vue'
import type { Department } from '../../data/roles'
import type { Locale } from '../../i18n/translations'
import { prefersReducedMotion } from '../../composables/useReducedMotion'
import { t } from '../../i18n/translations'
import { scrollTo } from '../../scripts/smoothScroll'
import CategoryNav from '../common/CategoryNav.vue'
import SectionLabel from '../common/SectionLabel.vue'
@@ -16,72 +13,24 @@ const { locale = 'en', departments = [] } = defineProps<{
departments?: readonly Department[]
}>()
const activeCategory = ref('all')
const visibleDepartments = computed(() =>
departments.filter((d) => d.roles.length > 0)
)
const categories = computed(() =>
visibleDepartments.value.map((d) => ({ label: d.name, value: d.key }))
const categories = computed(() => [
{ label: 'ALL', value: 'all' },
...visibleDepartments.value.map((d) => ({ label: d.name, value: d.key }))
])
const filteredDepartments = computed(() =>
activeCategory.value === 'all'
? visibleDepartments.value
: visibleDepartments.value.filter((d) => d.key === activeCategory.value)
)
const hasRoles = computed(() => visibleDepartments.value.length > 0)
const activeCategory = ref('')
const sectionRefs = useTemplateRefsList<HTMLElement>()
let isScrolling = false
let pendingFrame = 0
const HEADER_OFFSET = -144
const ACTIVATION_OFFSET = 300
const deptElementId = (key: string) => `careers-dept-${key}`
function pickActiveSection() {
pendingFrame = 0
if (isScrolling) return
const sections = sectionRefs.value as HTMLElement[]
if (sections.length === 0) return
let active = sections[0]
for (const el of sections) {
if (el.getBoundingClientRect().top - ACTIVATION_OFFSET <= 0) {
active = el
} else {
break
}
}
activeCategory.value = active.id.replace(/^careers-dept-/, '')
}
function scheduleUpdate() {
if (pendingFrame !== 0) return
pendingFrame = requestAnimationFrame(pickActiveSection)
}
onMounted(pickActiveSection)
useEventListener('scroll', scheduleUpdate, { passive: true })
useEventListener('resize', scheduleUpdate, { passive: true })
function scrollToDepartment(deptKey: string) {
activeCategory.value = deptKey
isScrolling = true
const el = document.getElementById(deptElementId(deptKey))
if (!el) {
isScrolling = false
return
}
scrollTo(el, {
offset: HEADER_OFFSET,
duration: 0.8,
immediate: prefersReducedMotion(),
onComplete: () => {
isScrolling = false
pickActiveSection()
}
})
}
</script>
<template>
@@ -99,10 +48,9 @@ function scrollToDepartment(deptKey: string) {
</h2>
<CategoryNav
v-if="hasRoles"
v-model="activeCategory"
:categories="categories"
:model-value="activeCategory"
class="mt-4"
@update:model-value="scrollToDepartment"
/>
</div>
</div>
@@ -117,11 +65,9 @@ function scrollToDepartment(deptKey: string) {
</p>
<div
v-for="dept in visibleDepartments"
:id="deptElementId(dept.key)"
:ref="sectionRefs.set"
v-for="dept in filteredDepartments"
:key="dept.key"
class="mb-12 scroll-mt-24 last:mb-0 md:scroll-mt-36"
class="mb-12 last:mb-0"
>
<SectionLabel>
{{ dept.name }}
@@ -130,7 +76,7 @@ function scrollToDepartment(deptKey: string) {
<a
v-for="role in dept.roles"
:key="role.id"
:href="role.jobUrl"
:href="role.applyUrl"
target="_blank"
rel="noopener noreferrer"
class="border-primary-warm-gray/20 group flex items-center justify-between border-b py-5"

View File

@@ -1,30 +0,0 @@
<script setup lang="ts">
import type { Locale } from '../../i18n/translations'
import { t } from '../../i18n/translations'
import SectionLabel from '../common/SectionLabel.vue'
const { locale = 'en' } = defineProps<{
locale?: Locale
}>()
</script>
<template>
<section class="px-6 pt-24 pb-14 md:px-20 md:pt-32 md:pb-20">
<div class="mx-auto flex w-full max-w-6xl flex-col gap-7">
<SectionLabel>
{{ t('cloudNodes.hero.label', locale) }}
</SectionLabel>
<h1
class="text-primary-comfy-canvas max-w-4xl text-4xl/tight md:text-6xl"
>
{{ t('cloudNodes.hero.heading', locale) }}
</h1>
<p class="text-primary-warm-gray max-w-3xl text-base/relaxed md:text-lg">
{{ t('cloudNodes.hero.body', locale) }}
</p>
</div>
</section>
</template>

View File

@@ -1,49 +0,0 @@
<script setup lang="ts">
import type { PackNode } from '../../data/cloudNodes'
import type { Locale } from '../../i18n/translations'
import { useNodesByCategory } from '../../composables/useNodesByCategory'
import { t } from '../../i18n/translations'
const { locale = 'en', nodes } = defineProps<{
locale?: Locale
nodes: readonly PackNode[]
}>()
const { groupedNodes } = useNodesByCategory(() => nodes)
</script>
<template>
<details
class="group border-primary-warm-gray/20 rounded-2xl border px-4 py-3"
>
<summary
class="text-primary-comfy-canvas cursor-pointer list-none text-sm font-semibold"
>
{{ t('cloudNodes.card.nodesHeading', locale) }}
</summary>
<div class="mt-4 flex flex-col gap-5">
<div
v-for="group in groupedNodes"
:key="group.category"
class="flex flex-col gap-2"
>
<h4
class="text-primary-warm-gray text-xs font-semibold tracking-widest uppercase"
>
{{ group.category }}
</h4>
<ul class="flex flex-col gap-1">
<li
v-for="node in group.nodes"
:key="node.name"
class="text-primary-comfy-canvas text-sm/relaxed"
>
{{ node.displayName }}
</li>
</ul>
</div>
</div>
</details>
</template>

View File

@@ -1,52 +0,0 @@
<script setup lang="ts">
import { useBannerImage } from '../../composables/useBannerImage'
const { bannerUrl, iconUrl, name } = defineProps<{
bannerUrl?: string
iconUrl?: string
name: string
}>()
const {
DEFAULT_BANNER,
isImageError,
showDefaultBanner,
imgSrc,
onImageError
} = useBannerImage({
bannerUrl: () => bannerUrl,
iconUrl: () => iconUrl
})
</script>
<template>
<div
class="z-0 aspect-7/3 w-full overflow-hidden"
data-testid="cloud-node-pack-banner"
>
<div v-if="showDefaultBanner" class="size-full">
<img
:src="DEFAULT_BANNER"
:alt="`${name} banner`"
class="size-full object-cover"
/>
</div>
<div v-else class="relative size-full">
<div
v-if="imgSrc && !isImageError"
class="absolute inset-0 bg-cover bg-center bg-no-repeat opacity-30"
:style="{ backgroundImage: `url(${imgSrc})`, filter: 'blur(10px)' }"
/>
<img
:src="isImageError ? DEFAULT_BANNER : imgSrc"
:alt="`${name} banner`"
:class="
isImageError
? 'relative z-10 size-full object-cover'
: 'relative z-10 size-full object-contain'
"
@error="onImageError"
/>
</div>
</div>
</template>

View File

@@ -1,80 +0,0 @@
<script setup lang="ts">
import type { Pack } from '../../data/cloudNodes'
import type { Locale } from '../../i18n/translations'
import { t } from '../../i18n/translations'
import NodeList from './NodeList.vue'
import PackBanner from './PackBanner.vue'
const { locale = 'en', pack } = defineProps<{
locale?: Locale
pack: Pack
}>()
const detailHref =
locale === 'zh-CN'
? `/zh-CN/cloud/supported-nodes/${pack.id}`
: `/cloud/supported-nodes/${pack.id}`
function nodeCountLabel(nodeCount: number): string {
const key =
new Intl.PluralRules(locale).select(nodeCount) === 'one'
? 'cloudNodes.card.nodeCountOne'
: 'cloudNodes.card.nodeCountOther'
return t(key, locale).replace('{count}', String(nodeCount))
}
</script>
<template>
<article
class="bg-transparency-white-t5 border-primary-warm-gray/20 flex h-full flex-col overflow-hidden rounded-3xl border"
data-testid="cloud-node-pack-card"
>
<PackBanner
:banner-url="pack.bannerUrl"
:icon-url="pack.iconUrl"
:name="pack.displayName"
/>
<div class="flex flex-1 flex-col gap-5 p-5 md:p-6">
<div class="flex flex-col gap-2">
<h3 class="text-primary-comfy-canvas text-2xl/tight font-semibold">
<a
:href="detailHref"
class="hover:text-primary-comfy-yellow"
data-testid="cloud-node-pack-card-link"
>
{{ pack.displayName }}
</a>
</h3>
<p class="text-primary-warm-gray text-sm/relaxed">
{{
pack.description ||
t('cloudNodes.card.unavailableDescription', locale)
}}
</p>
</div>
<div class="flex flex-wrap items-center gap-3 text-sm">
<a
v-if="pack.repoUrl"
:href="pack.repoUrl"
target="_blank"
rel="noopener noreferrer"
class="text-primary-comfy-yellow hover:text-primary-comfy-yellow/85 font-semibold underline"
>
{{ t('cloudNodes.card.viewRepo', locale) }}
</a>
<span v-else class="text-primary-warm-gray">
{{ t('cloudNodes.card.viewRepo', locale) }}
</span>
<span class="text-primary-warm-gray"></span>
<span class="text-primary-comfy-canvas">{{
nodeCountLabel(pack.nodes.length)
}}</span>
</div>
<NodeList :locale="locale" :nodes="pack.nodes" class="mt-auto" />
</div>
</article>
</template>

View File

@@ -1,203 +0,0 @@
<script setup lang="ts">
import { cn } from '@comfyorg/tailwind-utils'
import type { Pack } from '../../data/cloudNodes'
import type { Locale } from '../../i18n/translations'
import {
formatLocalizedMediumDate,
formatLocalizedNumber
} from '@comfyorg/shared-frontend-utils/formatUtil'
import { useNodesByCategory } from '../../composables/useNodesByCategory'
import { t } from '../../i18n/translations'
import PackBanner from './PackBanner.vue'
const { pack, locale = 'en' } = defineProps<{
pack: Pack
locale?: Locale
}>()
const backHref =
locale === 'zh-CN' ? '/zh-CN/cloud/supported-nodes' : '/cloud/supported-nodes'
const { groupedNodes } = useNodesByCategory(() => pack.nodes)
</script>
<template>
<article
class="px-6 pb-20 md:px-20 md:pb-28"
data-testid="cloud-node-pack-detail"
>
<div class="mx-auto flex w-full max-w-6xl flex-col gap-8">
<a
:href="backHref"
class="text-primary-comfy-yellow hover:text-primary-comfy-yellow/85 w-fit text-sm font-semibold underline"
>
{{ t('cloudNodes.detail.back', locale) }}
</a>
<div
class="bg-transparency-white-t5 border-primary-warm-gray/20 overflow-hidden rounded-3xl border"
>
<PackBanner
:banner-url="pack.bannerUrl"
:icon-url="pack.iconUrl"
:name="pack.displayName"
/>
<div class="flex flex-col gap-7 p-5 md:p-6">
<header class="flex flex-col gap-2">
<h1
class="text-primary-comfy-canvas text-3xl/tight font-semibold md:text-4xl"
>
{{ pack.displayName }}
</h1>
<p
class="text-primary-warm-gray text-sm/relaxed md:text-base/relaxed"
>
{{
pack.description ||
t('cloudNodes.card.unavailableDescription', locale)
}}
</p>
</header>
<dl class="grid grid-cols-1 gap-4 text-sm md:grid-cols-2">
<div class="flex flex-col gap-1">
<dt class="text-primary-warm-gray">
{{ t('cloudNodes.card.viewRepo', locale) }}
</dt>
<dd>
<a
v-if="pack.repoUrl"
:href="pack.repoUrl"
target="_blank"
rel="noopener noreferrer"
class="text-primary-comfy-yellow hover:text-primary-comfy-yellow/85 font-semibold underline"
>
{{ pack.repoUrl }}
</a>
<span v-else class="text-primary-comfy-canvas"></span>
</dd>
</div>
<div class="flex flex-col gap-1">
<dt class="text-primary-warm-gray">
{{ t('cloudNodes.detail.publisher', locale) }}
</dt>
<dd class="text-primary-comfy-canvas">
{{ pack.publisher?.name || pack.publisher?.id || '—' }}
</dd>
</div>
<div class="flex flex-col gap-1">
<dt class="text-primary-warm-gray">
{{ t('cloudNodes.detail.downloads', locale) }}
</dt>
<dd class="text-primary-comfy-canvas">
{{ formatLocalizedNumber(pack.downloads, locale) }}
</dd>
</div>
<div class="flex flex-col gap-1">
<dt class="text-primary-warm-gray">
{{ t('cloudNodes.detail.stars', locale) }}
</dt>
<dd class="text-primary-comfy-canvas">
{{ formatLocalizedNumber(pack.githubStars, locale) }}
</dd>
</div>
<div class="flex flex-col gap-1">
<dt class="text-primary-warm-gray">
{{ t('cloudNodes.detail.latestVersion', locale) }}
</dt>
<dd class="text-primary-comfy-canvas">
{{ pack.latestVersion || '—' }}
</dd>
</div>
<div class="flex flex-col gap-1">
<dt class="text-primary-warm-gray">
{{ t('cloudNodes.detail.license', locale) }}
</dt>
<dd class="text-primary-comfy-canvas">
{{ pack.license || '—' }}
</dd>
</div>
<div class="flex flex-col gap-1">
<dt class="text-primary-warm-gray">
{{ t('cloudNodes.detail.lastUpdated', locale) }}
</dt>
<dd class="text-primary-comfy-canvas">
{{ formatLocalizedMediumDate(pack.lastUpdated, locale) }}
</dd>
</div>
</dl>
<section class="flex flex-col gap-4">
<h2
class="text-primary-comfy-canvas text-xl font-semibold md:text-2xl"
>
{{ t('cloudNodes.detail.nodesHeading', locale) }}
</h2>
<section
v-for="group in groupedNodes"
:key="group.category"
class="border-primary-warm-gray/20 rounded-2xl border p-4"
>
<h3 class="text-primary-comfy-canvas text-base font-semibold">
{{ group.category }}
</h3>
<ul class="mt-3 flex flex-col gap-3">
<li
v-for="node in group.nodes"
:key="node.name"
class="border-primary-warm-gray/20 rounded-xl border p-3"
data-testid="cloud-node-pack-detail-node"
>
<div class="flex flex-wrap items-center gap-2">
<span
class="text-primary-comfy-canvas text-sm font-semibold"
>
{{ node.displayName }}
</span>
<span
v-if="node.experimental"
:class="
cn(
'bg-primary-comfy-yellow/20 text-primary-comfy-canvas rounded-full px-2 py-0.5 text-xs font-semibold'
)
"
>
{{ t('cloudNodes.detail.experimental', locale) }}
</span>
<span
v-if="node.deprecated"
:class="
cn(
'text-primary-comfy-canvas rounded-full bg-red-500/15 px-2 py-0.5 text-xs font-semibold'
)
"
>
{{ t('cloudNodes.detail.deprecated', locale) }}
</span>
</div>
<p
v-if="node.description"
class="text-primary-warm-gray mt-2 text-sm/relaxed"
>
{{ node.description }}
</p>
</li>
</ul>
</section>
</section>
</div>
</div>
</div>
</article>
</template>

View File

@@ -1,113 +0,0 @@
<script setup lang="ts">
import { ref } from 'vue'
import { cn } from '@comfyorg/tailwind-utils'
import type { Pack } from '../../data/cloudNodes'
import type { Locale } from '../../i18n/translations'
import { useFilteredPacks } from '../../composables/useFilteredPacks'
import type { PackSortMode } from '../../composables/useFilteredPacks'
import { t } from '../../i18n/translations'
import SectionLabel from '../common/SectionLabel.vue'
import PackCard from './PackCard.vue'
const { locale = 'en', packs } = defineProps<{
locale?: Locale
packs: readonly Pack[]
}>()
const query = defineModel<string>('query', { default: '' })
const sortMode = ref<PackSortMode>('downloads')
const { filteredPacks } = useFilteredPacks({
packs: () => packs,
query,
sortMode
})
</script>
<template>
<section class="px-6 pb-20 md:px-20 md:pb-32">
<div class="mx-auto flex w-full max-w-6xl flex-col gap-8">
<div class="flex flex-col gap-3">
<SectionLabel>
{{ t('cloudNodes.hero.label', locale) }}
</SectionLabel>
<h2
class="text-primary-comfy-canvas text-3xl/tight font-medium md:text-4xl"
>
{{ t('cloudNodes.section.heading', locale) }}
</h2>
</div>
<div
class="flex flex-col gap-4 md:flex-row md:items-center md:justify-between"
>
<label for="cloud-nodes-search" class="sr-only">
{{ t('cloudNodes.search.label', locale) }}
</label>
<input
id="cloud-nodes-search"
v-model="query"
:placeholder="t('cloudNodes.search.placeholder', locale)"
:class="
cn(
'bg-transparency-white-t5 border-primary-warm-gray/30 text-primary-comfy-canvas placeholder:text-primary-warm-gray/80 w-full rounded-2xl border px-4 py-3 text-sm md:max-w-md'
)
"
data-testid="cloud-nodes-search"
/>
<label for="cloud-nodes-sort" class="sr-only">
{{ t('cloudNodes.sort.label', locale) }}
</label>
<select
id="cloud-nodes-sort"
v-model="sortMode"
class="bg-transparency-white-t5 border-primary-warm-gray/30 text-primary-comfy-canvas w-full appearance-none rounded-2xl border bg-size-[0.65rem_0.65rem] bg-position-[right_1rem_center] bg-no-repeat py-3 pr-12 pl-4 text-sm md:w-64"
:style="{
backgroundImage:
'url(\'data:image/svg+xml;utf8,<svg xmlns=%22http://www.w3.org/2000/svg%22 viewBox=%220 0 12 12%22 fill=%22%23a39b8d%22><path d=%22M6 9.2L1.4 4.6 2.8 3.2 6 6.4l3.2-3.2 1.4 1.4z%22/></svg>\')'
}"
>
<option value="downloads">
{{ t('cloudNodes.sort.downloads', locale) }}
</option>
<option value="mostNodes">
{{ t('cloudNodes.sort.mostNodes', locale) }}
</option>
<option value="az">{{ t('cloudNodes.sort.az', locale) }}</option>
<option value="recentlyUpdated">
{{ t('cloudNodes.sort.recentlyUpdated', locale) }}
</option>
</select>
</div>
<p
v-if="filteredPacks.length === 0"
class="text-primary-warm-gray rounded-2xl border border-dashed border-current/30 px-5 py-6 text-sm"
>
<span class="text-primary-comfy-canvas block text-base font-semibold">
{{ t('cloudNodes.empty.heading', locale) }}
</span>
<span class="mt-2 block">{{ t('cloudNodes.empty.body', locale) }}</span>
</p>
<div
v-else
class="grid grid-cols-1 gap-5 md:grid-cols-2"
role="list"
:aria-label="t('cloudNodes.list.ariaLabel', locale)"
>
<PackCard
v-for="pack in filteredPacks"
:key="pack.id"
:pack="pack"
:locale="locale"
role="listitem"
/>
</div>
</div>
</section>
</template>

View File

@@ -1,11 +1,7 @@
<script setup lang="ts">
import { cn } from '@comfyorg/tailwind-utils'
import {
useEventListener,
useIntersectionObserver,
useTemplateRefsList
} from '@vueuse/core'
import { computed, onMounted, ref } from 'vue'
import { useIntersectionObserver, useTemplateRefsList } from '@vueuse/core'
import { computed, ref } from 'vue'
import type { Locale, TranslationKey } from '../../i18n/translations'
@@ -44,25 +40,13 @@ const activeSection = ref(sections[0]?.id ?? '')
const sectionRefs = useTemplateRefsList<HTMLElement>()
let isScrolling = false
let scrollSafetyTimer: ReturnType<typeof setTimeout> | undefined
const HEADER_OFFSET = -144
const BOTTOM_THRESHOLD_PX = 4
const SCROLL_SAFETY_MS = 1500
function clearScrollLock() {
isScrolling = false
if (scrollSafetyTimer !== undefined) {
clearTimeout(scrollSafetyTimer)
scrollSafetyTimer = undefined
}
}
useIntersectionObserver(
sectionRefs,
(entries) => {
if (isScrolling) return
if (isAtBottom()) return
let best: IntersectionObserverEntry | null = null
for (const entry of entries) {
if (!entry.isIntersecting) continue
@@ -74,39 +58,22 @@ useIntersectionObserver(
{ rootMargin: '-20% 0px -60% 0px' }
)
function isAtBottom(): boolean {
const scrollBottom = window.scrollY + window.innerHeight
return (
scrollBottom >= document.documentElement.scrollHeight - BOTTOM_THRESHOLD_PX
)
}
function activateLastIfAtBottom() {
if (isScrolling) return
if (!isAtBottom()) return
const lastId = sections[sections.length - 1]?.id
if (lastId) activeSection.value = lastId
}
onMounted(activateLastIfAtBottom)
useEventListener('scroll', activateLastIfAtBottom, { passive: true })
function scrollToSection(id: string) {
activeSection.value = id
clearScrollLock()
isScrolling = true
scrollSafetyTimer = setTimeout(clearScrollLock, SCROLL_SAFETY_MS)
const el = document.getElementById(id)
if (el) {
scrollTo(el, {
offset: HEADER_OFFSET,
duration: 0.8,
immediate: prefersReducedMotion(),
onComplete: clearScrollLock
onComplete: () => {
isScrolling = false
}
})
return
}
clearScrollLock()
isScrolling = false
}
</script>

View File

@@ -41,7 +41,7 @@ function toggle(index: number) {
</script>
<template>
<section class="max-w-9xl mx-auto px-4 py-24 md:px-20 md:py-40">
<section class="px-4 py-24 md:px-20 md:py-40">
<div class="flex flex-col gap-6 md:flex-row md:gap-16">
<!-- Left heading -->
<div

View File

@@ -13,7 +13,7 @@ const { stars } = defineProps<{
target="_blank"
rel="noopener noreferrer"
:aria-label="`ComfyUI on GitHub ${stars} stars`"
class="hidden shrink-0 items-center gap-1 lg:flex"
class="hidden shrink-0 items-center gap-2 lg:flex"
>
<NodeBadge
:segments="[{ text: stars }]"
@@ -22,7 +22,7 @@ const { stars } = defineProps<{
size-class="h-5 sm:h-5"
/>
<span
class="bg-primary-comfy-yellow block size-6 shrink-0"
class="bg-primary-comfy-yellow block size-7"
aria-hidden="true"
style="mask: url('/icons/social/github.svg') center / contain no-repeat"
/>

View File

@@ -26,7 +26,7 @@ const {
<img
src="/icons/node-left.svg"
alt=""
class="-mx-px h-full w-auto self-stretch"
class="-mx-px self-stretch"
aria-hidden="true"
/>
@@ -38,7 +38,7 @@ const {
v-if="i > 0"
src="/icons/node-union.svg"
alt=""
class="-mx-px h-full w-auto self-stretch"
class="-mx-px self-stretch"
aria-hidden="true"
/>
<span
@@ -72,7 +72,7 @@ const {
<img
src="/icons/node-right.svg"
alt=""
class="-mx-px h-full w-auto self-stretch"
class="-mx-px self-stretch"
aria-hidden="true"
/>
</div>

View File

@@ -46,9 +46,7 @@ const cards = excludeProduct
</script>
<template>
<section
class="bg-primary-comfy-ink max-w-9xl mx-auto px-0 py-20 lg:px-20 lg:py-24"
>
<section class="bg-primary-comfy-ink px-0 py-20 lg:px-20 lg:py-24">
<!-- Header -->
<div class="flex flex-col items-center px-4 text-center">
<SectionLabel v-if="labelKey">

View File

@@ -82,7 +82,7 @@ const companyColumn: { title: string; links: FooterLink[] } = {
]
}
const contactColumn: { title: string; links: FooterLink[] } = {
const contactColumn = {
title: t('footer.contact', locale),
links: [
{ label: t('footer.sales', locale), href: routes.contact },
@@ -91,11 +91,6 @@ const contactColumn: { title: string; links: FooterLink[] } = {
href: externalLinks.support,
external: true
},
{
label: t('footer.cloudStatus', locale),
href: externalLinks.cloudStatus,
external: true
},
{ label: t('footer.press', locale), href: 'mailto:press@comfy.org' }
]
}

View File

@@ -14,28 +14,23 @@ const logos = [
'Ubisoft'
]
const mobileRow1Logos = logos.slice(0, 6)
const mobileRow2Logos = logos.slice(6)
const desktopLogos = Array.from({ length: 4 }, () => logos).flat()
const row1 = logos.slice(0, 6)
const mobileRow1 = [...row1, ...row1]
const row2 = logos.slice(6)
const mobileRow2 = [...row2, ...row2]
</script>
<template>
<section class="overflow-hidden py-12">
<!-- Single row on desktop -->
<div data-testid="social-proof-desktop" class="hidden w-max gap-2 md:flex">
<div class="animate-marquee hidden items-center gap-2 md:flex">
<div
v-for="copy in 2"
:key="copy"
class="animate-marquee flex shrink-0 items-center gap-2"
style="--marquee-gap: 0.5rem"
:aria-hidden="copy === 2 ? 'true' : undefined"
v-for="(logo, i) in desktopLogos"
:key="`${logo}-${i}`"
class="flex h-20 w-50 shrink-0 items-center justify-center"
>
<div
v-for="logo in logos"
:key="logo"
class="flex h-20 w-50 shrink-0 items-center justify-center"
>
<img :src="`/icons/clients/${logo}.svg`" :alt="logo" />
</div>
<img :src="`/icons/clients/${logo}.svg`" :alt="logo" />
</div>
</div>
@@ -44,38 +39,22 @@ const mobileRow2Logos = logos.slice(6)
data-testid="social-proof-mobile"
class="flex flex-col gap-8 md:hidden"
>
<div class="flex w-max gap-8">
<div class="animate-marquee flex items-center gap-8">
<div
v-for="copy in 2"
:key="copy"
class="animate-marquee flex shrink-0 items-center gap-8"
style="--marquee-gap: 2rem"
:aria-hidden="copy === 2 ? 'true' : undefined"
v-for="(logo, i) in mobileRow1"
:key="`${logo}-${i}`"
class="flex h-14 w-40 shrink-0 items-center justify-center"
>
<div
v-for="logo in mobileRow1Logos"
:key="logo"
class="flex h-14 w-40 shrink-0 items-center justify-center"
>
<img :src="`/icons/clients/${logo}.svg`" :alt="logo" />
</div>
<img :src="`/icons/clients/${logo}.svg`" :alt="logo" />
</div>
</div>
<div class="flex w-max gap-8">
<div class="animate-marquee-reverse flex items-center gap-8">
<div
v-for="copy in 2"
:key="copy"
class="animate-marquee-reverse flex shrink-0 items-center gap-8"
style="--marquee-gap: 2rem"
:aria-hidden="copy === 2 ? 'true' : undefined"
v-for="(logo, i) in mobileRow2"
:key="`${logo}-${i}`"
class="flex h-14 w-40 shrink-0 items-center justify-center"
>
<div
v-for="logo in mobileRow2Logos"
:key="logo"
class="flex h-14 w-40 shrink-0 items-center justify-center"
>
<img :src="`/icons/clients/${logo}.svg`" :alt="logo" />
</div>
<img :src="`/icons/clients/${logo}.svg`" :alt="logo" />
</div>
</div>
</div>

View File

@@ -45,11 +45,11 @@ const progressPercent = computed(() => `${progress.value * 100}%`)
</script>
<template>
<section class="max-w-9xl mx-auto px-6 py-16 lg:px-16 lg:py-24">
<section class="px-6 py-16 lg:px-16 lg:py-24">
<!-- Scrollable track -->
<div
ref="trackRef"
class="flex snap-x snap-mandatory scrollbar-none gap-12 overflow-x-auto lg:gap-20"
class="scrollbar-none flex snap-x snap-mandatory gap-12 overflow-x-auto lg:gap-20"
>
<div
v-for="(fb, i) in feedbacks"
@@ -75,7 +75,7 @@ const progressPercent = computed(() => `${progress.value * 100}%`)
<!-- Progress bar -->
<div class="h-1 flex-1 rounded-full bg-white/20">
<div
class="bg-primary-comfy-yellow h-full rounded-full"
class="bg-primary-comfy-yellow h-full rounded-full transition-all duration-200"
:style="{ width: progressPercent }"
/>
</div>

View File

@@ -5,7 +5,6 @@ import { useHeroAnimation } from '../../composables/useHeroAnimation'
import SectionLabel from '../common/SectionLabel.vue'
import type { Locale } from '../../i18n/translations'
import { t } from '../../i18n/translations'
import { ScrollTrigger } from '../../scripts/gsapSetup'
import VideoPlayer from '../common/VideoPlayer.vue'
const { locale = 'en' } = defineProps<{ locale?: Locale }>()
@@ -23,10 +22,6 @@ useHeroAnimation({
logo: logoRef,
video: videoRef
})
function handleLogoLoad() {
ScrollTrigger.refresh(true)
}
</script>
<template>
@@ -42,10 +37,7 @@ function handleLogoLoad() {
<img
src="https://media.comfy.org/website/customers/c-projection.webp"
alt="Comfy 3D logo"
width="1568"
height="1763"
class="mx-auto h-auto w-full max-w-md lg:max-w-none"
@load="handleLogoLoad"
class="mx-auto w-full max-w-md lg:max-w-none"
/>
</div>
@@ -72,7 +64,7 @@ function handleLogoLoad() {
</div>
<!-- Video -->
<div ref="videoRef" class="max-w-9xl mx-auto px-4 pb-20 lg:px-20 lg:pb-40">
<div ref="videoRef" class="px-4 pb-20 lg:px-20 lg:pb-40">
<VideoPlayer
src="https://media.comfy.org/website/customers/blackmath/video.webm"
poster="https://media.comfy.org/website/customers/blackmath/poster.webp"

View File

@@ -10,7 +10,7 @@ const prefix = locale === 'zh-CN' ? '/zh-CN' : ''
<template>
<section
class="max-w-9xl mx-auto grid grid-cols-1 gap-6 px-6 py-16 lg:grid-cols-2 lg:px-16 lg:py-24"
class="grid grid-cols-1 gap-6 px-6 py-16 lg:grid-cols-2 lg:px-16 lg:py-24"
>
<a
v-for="story in customerStories"

View File

@@ -7,7 +7,7 @@ const { locale = 'en' } = defineProps<{ locale?: Locale }>()
</script>
<template>
<section class="max-w-9xl mx-auto px-6 py-16 lg:px-20 lg:py-40">
<section class="px-6 py-16 lg:px-20 lg:py-40">
<VideoPlayer
src="https://media.comfy.org/website/customers/silverside/video.webm"
poster="https://media.comfy.org/website/customers/silverside/poster.webp"

View File

@@ -8,12 +8,10 @@ import { t } from '../../i18n/translations'
const {
arcadeId,
title,
aspectRatio = 16 / 9,
locale = 'en'
} = defineProps<{
arcadeId: string
title: string
aspectRatio?: number
locale?: Locale
}>()
@@ -26,8 +24,7 @@ const loaded = ref(false)
:aria-label="t('demos.embed.label', locale)"
>
<div
class="relative mx-auto max-w-6xl overflow-hidden rounded-4xl border border-white/10"
:style="{ aspectRatio }"
class="relative mx-auto aspect-video max-w-6xl overflow-hidden rounded-4xl border border-white/10"
>
<div
v-if="!loaded"

View File

@@ -7,7 +7,7 @@ const { locale = 'en' } = defineProps<{ locale?: Locale }>()
<template>
<section
class="max-w-9xl mx-auto flex flex-col items-center px-4 pt-16 pb-24 text-center lg:px-20 lg:pt-20 lg:pb-40"
class="flex flex-col items-center px-4 pt-16 pb-24 text-center lg:px-20 lg:pt-20 lg:pb-40"
>
<span
class="text-primary-comfy-yellow text-sm font-bold tracking-widest uppercase"

View File

@@ -223,10 +223,7 @@ while (idx < items.length) {
</script>
<template>
<section
data-testid="gallery-grid"
class="max-w-9xl mx-auto px-4 pb-20 lg:px-20"
>
<section data-testid="gallery-grid" class="px-4 pb-20 lg:px-20">
<!-- Desktop grid -->
<div
class="rounded-5xl bg-transparency-white-t4 hidden flex-col gap-2 p-2 lg:flex"

View File

@@ -8,9 +8,7 @@ const { locale = 'en' } = defineProps<{ locale?: Locale }>()
</script>
<template>
<section
class="max-w-9xl mx-auto flex flex-col items-center px-6 pt-36 pb-16 text-center"
>
<section class="flex flex-col items-center px-6 pt-36 pb-16 text-center">
<SectionLabel>
{{ t('gallery.label', locale) }}
</SectionLabel>

View File

@@ -15,7 +15,7 @@ const row2 = [
<template>
<section
class="bg-primary-comfy-ink max-w-9xl mx-auto flex flex-col items-center px-4 py-24 lg:px-6 lg:py-32"
class="bg-primary-comfy-ink flex flex-col items-center px-4 py-24 lg:px-6 lg:py-32"
>
<!-- Node rows -->
<div

View File

@@ -12,9 +12,7 @@ const routes = getRoutes(locale)
</script>
<template>
<section
class="bg-primary-comfy-ink max-w-9xl mx-auto px-4 py-20 lg:px-20 lg:py-24"
>
<section class="bg-primary-comfy-ink px-4 py-20 lg:px-20 lg:py-24">
<GlassCard
class="flex flex-col gap-12 lg:flex-row lg:items-stretch lg:gap-8"
>

View File

@@ -36,9 +36,7 @@ const steps = [
</script>
<template>
<section
class="bg-primary-comfy-ink max-w-9xl mx-auto px-4 py-20 lg:px-20 lg:py-24"
>
<section class="bg-primary-comfy-ink px-4 py-20 lg:px-20 lg:py-24">
<div class="flex flex-col gap-12 lg:flex-row lg:gap-8">
<!-- Left heading -->
<div

File diff suppressed because it is too large Load Diff

View File

@@ -1,55 +1,57 @@
<script setup lang="ts">
import { ref } from 'vue'
import type { Locale } from '../../i18n/translations'
import { externalLinks } from '../../config/routes'
import { useHeroLogo } from '../../composables/useHeroLogo'
import { t } from '../../i18n/translations'
import BrandButton from '../common/BrandButton.vue'
import HeroCanvas from './HeroCanvas.vue'
const { locale = 'en' } = defineProps<{ locale?: Locale }>()
const logoContainer = ref<HTMLElement>()
const { loaded: logoLoaded } = useHeroLogo(logoContainer)
</script>
<template>
<section
class="max-w-9xl relative mx-auto flex min-h-auto flex-col lg:flex-row lg:items-center"
>
<section class="bg-primary-comfy-ink relative overflow-hidden">
<!--
Text sits in normal flow and drives the section height via min-h. The
canvas is layered above with z-10 and captures all pointer events, so the
text appears *behind* the nodes and the drag/slider interactions work
across the entire hero including over the text itself.
-->
<div
ref="logoContainer"
class="relative flex aspect-square w-full flex-1 items-center justify-center"
class="relative flex min-h-[680px] items-center px-6 py-14 lg:min-h-[900px] lg:justify-end lg:p-16"
>
<img
v-show="!logoLoaded"
src="https://media.comfy.org/website/homepage/hero-logo-seq/Logo00.webp"
alt="Comfy logo"
class="w-3/5"
/>
<div class="w-full lg:max-w-xl">
<h1
class="text-primary-comfy-canvas text-4xl font-light whitespace-pre-line lg:text-6xl"
>
{{ t('hero.title', locale) }}
</h1>
<p
class="text-primary-comfy-canvas mt-8 max-w-lg text-sm/relaxed lg:text-base"
>
{{ t('hero.subtitle', locale) }}
</p>
<BrandButton
:href="externalLinks.workflows"
variant="outline"
size="lg"
class="relative z-20 mt-8 w-full p-4 uppercase lg:w-auto lg:min-w-60"
>
{{ t('hero.runFirstWorkflow', locale) }}
</BrandButton>
</div>
</div>
<div class="flex-1 px-6 py-12 lg:px-16">
<h1
class="text-primary-comfy-canvas text-4xl font-light whitespace-pre-line lg:text-6xl"
>
{{ t('hero.title', locale) }}
</h1>
<p
class="text-primary-comfy-canvas mt-8 max-w-lg text-sm/relaxed lg:text-base"
>
{{ t('hero.subtitle', locale) }}
</p>
<BrandButton
:href="externalLinks.workflows"
variant="outline"
size="lg"
class="mt-8 w-full p-4 uppercase lg:w-auto lg:min-w-60"
>
{{ t('hero.runFirstWorkflow', locale) }}
</BrandButton>
<!--
Canvas absolute-fills the section on every viewport. Because it sits on
top of the text (z-10) and is transparent except for the nodes, users
can drag nodes freely across the whole hero, over the copy included.
The default fit biases the cluster to the left on lg+ so nodes don't
start overlapping the text column on the right (see fitView).
-->
<div class="absolute inset-0 z-10">
<HeroCanvas />
</div>
</section>
</template>

View File

@@ -55,10 +55,7 @@ watch(activeIndex, (current, previous) => {
</script>
<template>
<section
ref="sectionRef"
class="max-w-9xl mx-auto px-4 py-20 lg:px-20 lg:py-24"
>
<section ref="sectionRef" class="px-4 py-20 lg:px-20 lg:py-24">
<!-- Section header -->
<div class="flex flex-col items-center text-center">
<NodeBadge :segments="badgeSegments" segment-class="" />

View File

@@ -25,7 +25,7 @@ const categories: Category[] = [
{
label: t('useCase.vfx', locale),
leftSrc: 'https://media.comfy.org/website/homepage/use-case/left1.webm',
rightSrc: 'https://media.comfy.org/website/homepage/use-case/right1.webm'
rightSrc: 'https://media.comfy.org/website/homepage/use-case/right1.webp'
},
{
label: t('useCase.advertising', locale),

View File

@@ -1,137 +0,0 @@
<script setup lang="ts">
import { cn } from '@comfyorg/tailwind-utils'
import BrandButton from '../common/BrandButton.vue'
import { t } from '../../i18n/translations'
const {
displayName,
huggingFaceUrl,
docsUrl,
blogUrl,
hubSlug,
workflowCount,
directory
} = defineProps<{
displayName: string
huggingFaceUrl: string
docsUrl?: string
blogUrl?: string
hubSlug?: string
workflowCount: number
directory: string
}>()
const workflowsUrl = hubSlug
? `https://www.comfy.org/workflows/model/${hubSlug}`
: null
const dirDisplayMap: Record<string, string> = {
diffusion_models: 'Diffusion Model',
checkpoints: 'Checkpoint',
loras: 'LoRA',
controlnet: 'ControlNet',
clip_vision: 'CLIP Vision',
model_patches: 'Model Patch',
vae: 'VAE',
text_encoders: 'Text Encoder',
audio_encoders: 'Audio Encoder',
latent_upscale_models: 'Latent Upscale Model',
upscale_models: 'Upscale Model',
style_models: 'Style Model',
partner_nodes: 'Partner Node'
}
const eyebrow = dirDisplayMap[directory] ?? directory
const isPartnerNode = directory === 'partner_nodes'
</script>
<template>
<section
:class="
cn(
'mx-auto flex max-w-7xl flex-col gap-8 px-6 py-16',
'lg:flex-row lg:items-center lg:gap-16 lg:px-8 lg:py-24'
)
"
>
<div class="flex max-w-2xl flex-1 flex-col gap-6">
<p
class="text-sm font-medium uppercase tracking-widest text-primary-comfy-yellow"
>
{{ eyebrow }}
</p>
<h1 class="text-4xl font-bold text-primary-comfy-canvas lg:text-6xl">
{{ displayName }} in ComfyUI
</h1>
<p class="text-sm text-primary-comfy-canvas/60">
{{
t('models.hero.workflowCount').replace(
'{count}',
String(workflowCount)
)
}}
</p>
<div class="flex flex-col gap-3 sm:flex-row">
<BrandButton
v-if="workflowsUrl"
:href="workflowsUrl"
variant="solid"
size="lg"
class="w-full uppercase sm:w-auto sm:min-w-48"
>
{{ t('models.hero.primaryCta') }}
</BrandButton>
<BrandButton
v-if="!isPartnerNode && huggingFaceUrl"
:href="huggingFaceUrl"
target="_blank"
rel="noopener noreferrer"
:variant="workflowsUrl ? 'outline' : 'solid'"
size="lg"
class="w-full uppercase sm:w-auto sm:min-w-48"
>
{{ t('models.hero.secondaryCta') }}
</BrandButton>
<BrandButton
v-if="!workflowsUrl"
href="https://www.comfy.org/cloud"
target="_blank"
rel="noopener noreferrer"
:variant="huggingFaceUrl && !isPartnerNode ? 'outline' : 'solid'"
size="lg"
class="w-full uppercase sm:w-auto sm:min-w-48"
>
{{ t('models.hero.cloudCta') }}
</BrandButton>
<BrandButton
v-if="docsUrl"
:href="docsUrl"
target="_blank"
rel="noopener noreferrer"
variant="outline"
size="lg"
class="w-full uppercase sm:w-auto sm:min-w-48"
>
{{ t('models.hero.tutorialCta') }}
</BrandButton>
</div>
<div v-if="blogUrl" class="text-sm text-primary-comfy-canvas/60">
<a
:href="blogUrl"
target="_blank"
rel="noopener noreferrer"
class="hover:text-primary-comfy-canvas underline"
>
{{ t('models.hero.blogLink') }}
</a>
</div>
</div>
</section>
</template>

View File

@@ -7,7 +7,6 @@ import { ref } from 'vue'
import BrandButton from '../common/BrandButton.vue'
import PricingPlanFeatureList from './PricingPlanFeatureList.vue'
import PricingTierCard from './PricingTierCard.vue'
import { SHOW_FREE_TIER } from '../../config/features'
import { externalLinks, getRoutes } from '../../config/routes'
import { t } from '../../i18n/translations'
@@ -38,23 +37,21 @@ interface PricingPlan {
isEnterprise?: boolean
}
const freePlan: PricingPlan = {
id: 'free',
labelKey: 'pricing.plan.free.label',
summaryKey: 'pricing.plan.free.summary',
priceKey: 'pricing.plan.free.price',
creditsKey: 'pricing.plan.free.credits',
estimateKey: 'pricing.plan.free.estimate',
ctaKey: 'pricing.plan.free.cta',
ctaHref: externalLinks.cloud,
features: [
{ text: 'pricing.plan.free.feature1' },
{ text: 'pricing.plan.free.feature2' }
]
}
const plans: PricingPlan[] = [
...(SHOW_FREE_TIER ? [freePlan] : []),
{
id: 'free',
labelKey: 'pricing.plan.free.label',
summaryKey: 'pricing.plan.free.summary',
priceKey: 'pricing.plan.free.price',
creditsKey: 'pricing.plan.free.credits',
estimateKey: 'pricing.plan.free.estimate',
ctaKey: 'pricing.plan.free.cta',
ctaHref: externalLinks.cloud,
features: [
{ text: 'pricing.plan.free.feature1' },
{ text: 'pricing.plan.free.feature2' }
]
},
{
id: 'standard',
labelKey: 'pricing.plan.standard.label',
@@ -64,9 +61,7 @@ const plans: PricingPlan[] = [
estimateKey: 'pricing.plan.standard.estimate',
ctaKey: 'pricing.plan.standard.cta',
ctaHref: subscribeUrl('standard'),
featureIntroKey: SHOW_FREE_TIER
? 'pricing.plan.standard.featureIntro'
: undefined,
featureIntroKey: 'pricing.plan.standard.featureIntro',
features: [
{ text: 'pricing.plan.standard.feature1' },
{ text: 'pricing.plan.standard.feature2' }
@@ -121,7 +116,7 @@ const activePlanIndex = ref(0)
</script>
<template>
<section class="max-w-9xl mx-auto px-4 py-16 lg:px-20 lg:py-14">
<section class="px-4 py-16 lg:px-20 lg:py-14">
<!-- Header -->
<div class="mx-auto mb-8 max-w-3xl text-center lg:mb-10">
<h1
@@ -135,7 +130,7 @@ const activePlanIndex = ref(0)
</div>
<!-- Mobile plan tabs -->
<div class="mb-6 flex scrollbar-none gap-2 overflow-x-auto lg:hidden">
<div class="scrollbar-none mb-6 flex gap-2 overflow-x-auto lg:hidden">
<button
v-for="(plan, index) in plans"
:key="plan.id"
@@ -155,14 +150,9 @@ const activePlanIndex = ref(0)
</button>
</div>
<!-- Desktop: dynamic grid (3 or 4 columns) / Mobile: single card -->
<!-- Desktop: 4-column grid / Mobile: single card -->
<div
:class="
cn(
'rounded-5xl bg-transparency-white-t4 hidden p-2 lg:grid lg:gap-2',
standardPlans.length === 4 ? 'lg:grid-cols-4' : 'lg:grid-cols-3'
)
"
class="rounded-5xl bg-transparency-white-t4 hidden p-2 lg:grid lg:grid-cols-4 lg:gap-2"
>
<PricingTierCard v-for="plan in standardPlans" :key="plan.id">
<!-- Label + badge -->
@@ -233,18 +223,10 @@ const activePlanIndex = ref(0)
<!-- Features -->
<div v-if="plan.features.length" class="px-6 py-3">
<p
v-if="plan.featureIntroKey"
class="text-primary-comfy-canvas mb-2 text-sm font-semibold"
>
{{ t(plan.featureIntroKey, locale) }}
</p>
<p
v-else
class="text-primary-comfy-canvas mb-2 text-sm font-semibold"
aria-hidden="true"
>
&nbsp;
<p class="text-primary-comfy-canvas mb-2 text-sm font-semibold">
{{
plan.featureIntroKey ? t(plan.featureIntroKey, locale) : '&nbsp;'
}}
</p>
<ul class="space-y-2">
<li

View File

@@ -60,7 +60,7 @@ const features: IncludedFeature[] = [
</script>
<template>
<section class="max-w-9xl mx-auto px-4 py-16 lg:px-20 lg:py-24">
<section class="px-4 py-16 lg:px-20 lg:py-24">
<div class="mx-auto w-full lg:grid lg:grid-cols-[280px_1fr] lg:gap-x-16">
<!-- Heading -->
<div

View File

@@ -25,7 +25,7 @@ const cards = [
</script>
<template>
<section class="max-w-9xl mx-auto px-4 pt-24 lg:px-20 lg:pt-40">
<section class="px-4 pt-24 lg:px-20 lg:pt-40">
<h2
class="text-primary-comfy-canvas text-3.5xl/tight mx-auto max-w-3xl text-center font-light lg:text-5xl/tight"
>

View File

@@ -1,7 +1,6 @@
<script setup lang="ts">
import type { Locale } from '../../../i18n/translations'
import { SHOW_FREE_TIER } from '../../../config/features'
import { getRoutes } from '../../../config/routes'
import { t } from '../../../i18n/translations'
@@ -10,7 +9,7 @@ const { locale = 'en' } = defineProps<{ locale?: Locale }>()
<template>
<section
class="bg-transparency-white-t4 rounded-5xl max-w-9xl mx-auto mt-4 mb-24 p-2 px-4 lg:mt-8 lg:mb-40 lg:px-20"
class="bg-transparency-white-t4 rounded-5xl mx-4 mt-4 mb-24 p-2 lg:mx-20 lg:mt-8 lg:mb-40"
>
<div
class="bg-primary-comfy-yellow flex flex-col gap-24 rounded-4xl p-8 lg:flex-row lg:items-end lg:justify-between"
@@ -26,10 +25,7 @@ const { locale = 'en' } = defineProps<{ locale?: Locale }>()
{{ t('cloud.pricing.description', locale) }}
</p>
<p
v-if="SHOW_FREE_TIER"
class="text-primary-comfy-ink mt-4 text-base font-bold"
>
<p class="text-primary-comfy-ink mt-4 text-base font-bold">
{{ t('cloud.pricing.tagline', locale) }}
</p>
</div>

View File

@@ -442,7 +442,7 @@ onBeforeUnmount(() => {
</script>
<template>
<section class="max-w-9xl mx-auto px-4 py-24 lg:px-20">
<section class="px-4 py-24 lg:px-20">
<GlassCard
class="flex flex-col gap-8 lg:flex-row lg:items-stretch lg:gap-16"
>

Some files were not shown because too many files have changed in this diff Show More