Details:
- Added flatten-headers.py, a python implementation of the bash script
flatten-headers.sh. The new script appears to be 25-100x faster,
depending on the operating system, filesystem, etc. The python script
abides by the same command line interface as its predecessor and
targets python 2.7 or later. (Thanks to Devin Matthews for suggesting
that I look into a python replacement for higher performance.)
- Activated use of flatten-headers.py in common.mk via the FLATTEN_H
variable.
- Made minor tweaks to flatten-headers.sh such as spelling corrections
in comments.
Details:
- Found the likely cause of the Travis CI out-of-tree build failures:
config.mk was being read from DIST_PATH, rather than the current
directory.
Details:
- Defined the SHELL variable in common.mk as "/bin/bash" so that the
-n option can be used with echo in the Makefile rule for flattening
blis.h. Thanks to Devin Matthews for suggesting this fix.
Details:
- Fixed a mistake (hopefully) in d0c4dd0 that resulted in many more
osx/clang sub-tests than intended.
- Shortened the variable names in an effort to make them more readable
via the Travis CI web interface.
Details:
- Added 'pwd' commands to the script portion of the .travis.yml file in
an attempt to uncover the problem with the recent out-of-tree build
testing changes made in d0c4dd0.
Details:
- Added "temp_dir" argument to flatten-headers.sh so that the caller can
specify where intermediate files should be created as the script runs.
- Updated flatten-headers.sh to create intermediate files in temp_dir
instead of alongside the corresponding source files. This should now
(once again) allow out-of-tree builds where the BLIS distribution is
read-only, or where the out-of-tree build is running concurrently with
another out-of-tree build. (Thanks to Devin Matthews for pointing out
the possibility of simultaneous out-of-tree builds.)
Details:
- Modified .travis.yml file to include an out-of-tree build test (using
the "auto" configure target). Thanks to Devin Matthews for this
suggestion.
Details:
- Fix applied in 87978f6 was necessary but not sufficient to fix
out-of-tree builds. It turns out that using a source tree that had
already built the target erroneously gave the impression that
out-of-tree builds were working again, when in fact they were still
broken. The additional changes in this commit should complete the
fix that was started in the aforementioned commit. Thanks to Devin
Matthews and Shaden Smith for their help in isolating this issue.
Details:
- In bli_cpuid.c, fixed an off-by-one indexing statement in vpu_count()
whereby a string-terminating NULL character, '\0', is written beyond
the bounds of the model_num string.
- Minor whitespace and formatting edits to bli_cpuid.c.
Details:
- Added missing $(DIST_PATH)/ prefix to relative path to flatten-headers.sh
script in common.mk so that the script could be found during out-of-tree
builds. Thanks to Devin Matthews for reporting this bug.
Details:
- Fixed implicit typecasting of conj_t to trans_t in bli_[un]packm_cxk.c.
- Properly typecast integer arguments to match format specifier in various
calls to printf() in bli_l3_thrinfo.c, bli_cntx.c, bli_pool.c, and
bli_util_oapi.c.
- Fixed "unsigned less-than-comparison with zero" checks in bli_check.c,
bli_cntx.h.
- Fixed mis-typed enums in bli_cntx.c (e.g., l1mkr_t that should have been
l1fkr_t or l1vkr_t).
- Fixed instances of opid_t value BLIS_GEMM that should have been l3ukr_t
value BLIS_GEMM_UKR in bli_cntx_ref.c.
- NOTE: These issues were identified via compiler warnings when building
BLIS with clang on a rather old installation of OS X:
$ clang --version
Apple LLVM version 5.0 (clang-500.2.79) (based on LLVM 3.3svn)
Target: x86_64-apple-darwin15.2.0
Thread model: posix
Details:
- Removed the vast majority of directories named "old", which contained
deprecated code that I wasn't quite ready to jettison from the source
tree.
Details:
- Changed the interface of bli_getopt() to take a new argument, a getopt_t
struct, that stores the values of optarg, optind, opterr, and optopt,
and updated the implementation accordingly. (Previously, these
variables were assumed to be global.)
- Added a function for initializing a getopt_t struct.
- Changed test_libblis.c--currently the only consumer of bli_getopt()--to
utilize the new getopt_t state object.
Details:
- Reimplemented several sets of get/set-style preprocessor macros with
static functions, including those in the following frame/base headers:
auxinfo, cntl, mbool, mem, membrk, opid, and pool. A few headers in
frame/thread were touched as well: mutex_*, thrcomm, and thrinfo.
Details:
- Expanded checking of the arch_t id in bli_gks.c--either passed in from
the caller or as returned from bli_arch_query_id()--against the expected
range of id values. Thanks to Devangi Parikh for suggesting these
additional sanity checks.
Details:
- Defined a new 'uninstall-old-headers' target that allows users of BLIS to
uninstall no-longer-needed headers left over from previous installations.
- Fixed the 'uninstall-old' target so that it will install both .a and .so
libraries.
- Renamed 'uninstall-old' to 'uninstall-old-libs'.
- Added 'uninstall-old' target (different from previous 'uninstall-old'
target) that combines 'uninstall-old-libs' and 'uninstall-old-headers'.
Details:
- When CBLAS is enabled at configure-time, BLIS now creates a monolithic
cblas.h using the same flatten-header.sh script that was recently
introduced for creating monolithic blis.h header files. The top-level
Makefile will also install this cblas.h file into the install prefix
alongside blis.h when the 'install' target is invoked. The two header
files are compatible with one another. Regardless whether the user's
source #includes cblas.h, both blis.h and cblas.h, or just blis.h,
the user will get the CBLAS function prototypes and enums, as expected.
Details:
- Fixed a subtle bug in bli_cntx_get_[un]packm_ker_dt() in which the
function fails to return NULL when passed a kernel id argument that is
equal to or beyond BLIS_NUM_[UN]PACKM_KERS. Instead, the function was
attempting to index into the cntx_t's packm kernel array, which resulted
in undefined behvaior. Thanks to Devangi Parikh for finding this bug.
Details:
- Rewrote monolithify-header.sh (and renamed to flatten-header.sh) so that
headers are inserted recursively. This improves performance by a factor
of 3-4x.
- Modified configure to create an 'include/<configname>' directory in which
make can create a monolithic header.
- Modified the top-level Makefile so that a monolithic header is generated
unconditionally prior to compilation (stored in include/<configname>) and
so that the single header is installed instead of the 450 or so header
files that reside throughout the framework source tree.
- Added "include/*/*.h" to .gitignore file.
- Removed some pnacl/emscripten leftovers that I intended to include in
a1caeba (mostly in testsuite/Makefile).
- Trivial comment changes to frame/include/bli_f2c.h.
Details:
- Added support for the x86_64 configuration family to bli_arch.c and
bli_arch_config.h. Thanks to Johannes Dieterich for reporting this
issue.
- Bumped the default value for BLIS_SIMD_NUM_REGISTERS from 16 to 32 and
the default value for BLIS_SIMD_SIZE from 32 to 64. This will support
configuration families that include Skylake and newer processors without
any supported needed in the bli_family_*.h file. The semantics of these
values have always been "maximum" and not exact values; comments in
bli_kernel_macro_defs.h and the github wiki have been adjusted
accordingly.
Details:
- Erroneously placed the "don't overwrite existing blocksize" logic in
bli_blksz_init*() rather than in bli_cntx_set_blkszs(). It belongs in
the latter because that function copies blocksizes as-is from the
blksz_t function argument to the appropriate field in the cntx_t. If
the blksz_t was previously initialized selectively, based on the sign
of the blocksize value passed into bli_blksz_init*(), that just leaves
some fields possibly uninitialized (with garbage values), which
definitely will not work.
- The aforementioned logic has been moved to bli_cntx_set_blkszs() via
a new function bli_blksz_copy_if_pos(), which selectively copies only
the blocksizes that are greater than zero.
Details:
- Employ the new semantics of bli_blksz_init*() in e31f0b3 in various
sub-configurations' bli_cntx_init_*() functions by passing in 0 for
register and cache blocksizes that correpond to gemm microkernel
datatypes that were not registered, allowing the default values
set by the bli_cntx_init_*_ref() function call to remain.
Details:
- Updated the semantics of bli_blksz_init() and bli_blksz_init_ed() so
that non-positive blocksize values are ignored entirely. This provides
an easy way to indicate that certain existing values should not be
touched by the update. Thanks to Devangi Parikh for feedback that led
to these changes.
Details:
- Added missing x86_64 configuration directory, which was intended to be
part of b7ca580.
- Added -Wfatal-errors compiler warning flag to all configurations so that
compilation stops after the first error.
- Changed the vectorization flags for intel64 configuration to be compatible
with 'penryn', the oldest sub-config included in that family.
- Changed the vectorization flags for penryn to target the 'core2'
microarchitecture and ssse3.
Details:
- Added a dummy file to kernels/generic, which was previously empty, so
that git would begin tracking the otherwise-empty directory. This
directory's existence is necessary for proper execution of configure
for any configuration family that contains the 'generic'
sub-configuration. Thanks to Johannes Dieterich for reporting the
issue that led to this fix.
Details:
- It appears that Travis CL has implemented a new policy that results in
a test failing if it does not produce any output for more than 10
minutes. (Two test instances are now failing in Travis despite the most
recent commit not affecting the library or testsuite.) This issue can
be worked around by executing the test run via travis_wait, which takes
an optional time parameter. This commit attempts to use 'travis_wait 30'
in the .travis.yml file to prevent the early failure at 10 minutes.
Details:
- Removed -D_POSIX_C_SOURCE=200112L and -m64 flags from make_defs.mk file
of generic sub-configuration. These flags are generally not necessary,
and particularly not desirable for the generic configuration since they
unnecessarily restrict the environments in which the configuration can
be built.
* Add x86 and x86_64 processor families.
* Use generic config as fallback for more families.
After discussion with fgvanzee, a) it's "generic" and 2) use it for all the families as a fallback. Goal is that if a specific CPU is not yet supported by a family (say a new Intel microarchitecture on x86_64), it'll fall through to still work with the slower "generic" kernels
Details:
- Added a new script, monolithify-header.sh, to the 'build' directory.
This script recursively replaces all #include directives in a selected
file with the contents of the header files referenced by each directive.
The idea is to "flatten" a tree of .h files into a single file, with
the script acting as a C preprocessor that only processes #include
directives.
Details:
- Removed an errant #include "blis.h directive from bli_cntx_ind_stage.h.
The generaly policy is that no header file in BLIS should include
blis.h. This will be important in the near future when using a tool to
recursively create a monolithic blis.h file from its consitutent
headers.
Details:
- Updated bli_cpuid_query_id() so that BLIS_ARCH_GENERIC is always returned
if the hardware fails to test positive for any supported sub-configuration.
- Defined bli_gks_init_ref_cntx(), which will call the context initialization
function bli_cntx_init_configname() for the sub-configuration 'configname'
associated with the arch_t id returned by bli_arch_query_id(). This makes
initializing a reference context easy for experts who wish to construct
those contexts.
Details:
- Fixed incorrect calling sequence in bli_cntx_init_knl.c--an instance of
bli_blksz_init_easy() that should have been bli_blksz_init().
- Fixed a bug in code that is supposed to output the list of sub-directories
in the 'config' directory when configure script is run with no arguments.
- Expanded the output of "make showconfig" to include more info from config.mk.
- Minor changes to build/auto-detect/cpuid_x86.c, mostly in preparation for
someone to add excavator and zen support.
- Added a link to the ConfigurationHowTo wiki to config_registry.
- Other minor tweaks to configure.
